Used Polar Mohr 78X for sale (254)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Bedpfx Alezd Uvle Ajwu Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Condition: used, functionality: fully functional, OlympusIX70-S8F Inverted Fluorescence Phase Contrast Microscope. This Olympus IX70 microscope is capable of phase contrast, DIC, and fluorescence. It comes with an ergonomic tilting binocular head with 10x eyepieces. The microscope has a front and side photo port for adding a camera. The 0.5 N.A. condenser has DP10 and DP20 DIC prisms and Ph1, PhC phase annuli installed with the IX-LWPO polarizer. The 5 position fluorescence turret contains WIBA, and NU fluorescence filters. Also included is the IX-AN analyzer and U-DICT DIC prism. The microscope has a built in 1.0x / 1.5x mag changer. Good working condition. Please check out our other listings as well. Bedpfx Aljuax T Se Aswu

Condition: ready for operation (used), Year of construction: 2001, operating hours: 11,472 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: System 16iM, spindle speed (max.): 30,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details. • Electrical • Operating voltage: 400 V • Frequency: 50 Hz • Phases: 3-phase • Nominal current: 90 A • Recommended supply fuse: 100 A (slow-blow/time delay) • Supply cable size: 35 mm² copper • Wiring diagram: 4036 EP 0024 • CNC / Control • Microcomputer control: Professional A • CNC: FANUC System 16iM • DNC connection: Data server interface • Integrated IC memory: 160 MB • Interpolation: NURBS • Programs: 125 main and sub-programs storable simultaneously • Coordinate input: Polar coordinate input available • High-speed contour control: Super-GI • Processor: RISC for fast 3D machining calculations • Mechanical construction • Machine frame: Cast iron welded construction • Axes layout: Cross table system (X, Y); Z-axis console type • Guides: Preloaded ball linear guideways • Thermal stability: Oil circulation cooling for spindle temperature stabilization • Axis performance • Rapid traverse: up to 16,000 mm/min • Simultaneous machining: 3-axis contour milling • Contour accuracy: High (Super-GI control) • Spindle • Tool holder: HSK-A63F • Torque: 21 Nm • Front bearing diameter: 55 mm Bwedpeyvq Drofx Al Asu • Tool system • Tool magazine capacity: 15 tools • Tool breakage monitoring: Yes • Automatic tool changing: Yes • Applications / capabilities • Graphite electrode milling (incl. long tools) • Copper electrode machining • Hardened steel milling • Designed for automatic production sequences • Optimized surface finish capability • Contour-accurate 3D milling capability • Standard/integrated systems • Graphite dust extraction system • Dust removal via: air blast, spindle suction, tool suction • Filter system with automatic collection container • Minimum quantity lubrication (MQL) • Designed for high-speed graphite machining • Suitable for hardened mold cores

Condition: used, used, good conditionMake FrommiaType 705 P1MachineNo. 119mobiletiltable from 0 to 45°motor 2 speeds/polarity reversible6 speed levels 2500/4500/5000/6000/9000/12,000 rpmright-left rotationtable size 1000 x 900 mmmilling arbor diameter 30 mmmilling fence with fine adjustmentsuction connection D 120 mmspace requirement approx. 1000 mm x 900 m x 1200 mmWeight approx. 400 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Bwedpfxsvxr Rtj Al Asu

Condition: used, Refrigeration system with NH₃ in the primary circuit and glycol in the secondary circuit. The system consists of the following components: 1. 2 refrigeration compressors for compressing NH₃, of which: - 1 x reciprocating compressor (Sabroe, 2008) with a capacity of 75 kW (used during normal operation) - 1 x screw compressor (Stal, 1991) with a capacity of 75 kW (used as a standby unit) 2. Plate heat exchanger (Alfa Laval, 1997) for evaporating NH3 whilst simultaneously cooling glycol. 100 m³/h of glycol is cooled from 0°C to -3°C. The glycol transports the cold into the process. 3. Condenser for the liquefaction of NH₃ (Evapco, 2002) with a condensation capacity of 620 kW, installed outdoors. 4. NH3 collection tank (EM-Polar, 2009) with a volume of approx. 3 hl 5. Glycol tank, vertical, clad 6. 2 centrifugal pumps for pumping glycol 7. Control cabinet with touch panel as HMI. 8. Various pipework, valves, sensors Additional title: NH₃-glycol cooler as a secondary cooling system; manufactured between approximat Bodpfx Aszizkgol Aewu Cooling capacity appr: 300 kW Operation / Control: Simatic S7-1500 (manufactured in 2022) Features: 2 x refrigeration compressors; plate heat exchanger (evaporator/glycol cooler); condenser; NH₃ tank; glycol tank; 2 x glycol pumps; control cabinet with touch panel; various pipes, valves and sensors

Condition: like new (used), Year of construction: 2023, operating hours: 3,671 h, For sale is a modern narrow-aisle/system forklift with a liftable cabin, specifically designed for the loading and unloading of goods and for order picking in very narrow storage aisles. The unit is in very good condition and is ideal for high-bay warehouses with high throughput. Technical data Type: Order picking forklift for high-bay warehouses Guidance system: Rails Year of manufacture: 2023 Serial number: 6963101 Condition: used / like new Rated load capacity: 1,500 kg Load center: 600 mm Lifting height: 10,250 mm Platform lifting height: 8,600 mm Mast type: Triplex Overall height (mast retracted): 4,460 mm Mast height (extended): 11,040 mm Overall length (head retracted): 3,846 mm Vehicle width: 1,270 / 1,520 mm Ground clearance: 60 mm Dead weight (without battery): 6,790 kg Battery weight: 1,760 kg Turning radius: 1,698 mm Rail height: 40 mm Rail spacing (z11): 1,580 mm Working aisle width: 1,760 mm Rack spacing: 1,850 mm Bwodszp D E Tepfx Al Aou Fork length: 1,200 mm Maximum load length: 1,200 mm Maximum load height: 1,500 mm Maximum load width: 1,000 mm Lateral safety clearance S1 (load in rack – vehicle): 125 mm Performance data Travel speed with/without load: 10 / 12 km/h (programmable) Lifting/lowering speed: 0.4 / 0.4 m/s Equipment Traction battery: TAB Standard 48V 8EPZS 1240 Ah + BFS Charger/rectifier: Polar Q420LOG 24/36/48V, 20-180A (programmable, with analysis functions) Braking system: electromechanical Rollers and wheels: Vulkollan (PU) Signal device (wireless): included Price Net price: EUR 85,990 per unit (excluding transport, assembly and commissioning) The narrow-aisle forklift comes from the official distribution of Toyota Material Handling Polska. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Quantity: More than 40 available Manufacturer: Indu-Sol Type: PNMA II PROFINET measuring device, version 3.0 (114090100) Mounting: 35 mm DIN rail Dimensions: 105 × 39 × 74 mm Weight: 310 g Input voltage: 24 V DC (20-28 V, reverse polarity protection) Output voltage: 24 V DC (max. 1 A) Current consumption: approx. 50 mA Power dissipation: approx. 1 W Protection rating: IP20 Connector: RJ45 Delay: < 1 bit/s at 100 Mbit/s Cable length: up to 100 m (Cat5/Cat5E) Bodezlt Hxepfx Al Ajwu Operating temperature: 0 °C to +70 °C Storage temperature: -15 °C to +75 °C Humidity: 10 – 90 %, non-condensing

Condition: new, VAS 5908 Vehicle Charging Computer Charging computer for vehicle starter batteries (lead-acid, Ge, AGM, and fleece batteries) Battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems/batteries) - 100% vehicle electrical system compatibility, protection of on-board electronics/airbags - Use as a charger, external power supply, and for vehicle supply in buffer mode (support during diagnostics/programming) - Extensive protection and self-protection functions - Short-circuit and reverse polarity protection Bwodpov Hptzsfx Al Asu - Protection function in the event of battery defects - Reliable spark suppression - Convenient menu navigation / configurable charging parameters - Built-in communication interface - Sealed housing, protected from internal contamination Housing version 'B': Advantageous for industrial production lines - Status indication via display and high-power LEDs - Menu navigation: German, English, French, Italian, Spanish - Extensive Accessories include an external operating status indicator (DBL-SIG-LR, remote indicator), power/charging cable, wall mounting bracket, etc. - Option: Custom charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnostic system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - Certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No. 60950-1-07 Used by leading automotive manufacturers Input voltage: 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; NOTE: Use special firmware for use in combination with inductive power transfer! Inrush current / 30A at 264VAC, temperature independent Circuit breaker: 16A slow-blow (e.g., characteristic B) Full load current / 10A (115V/230V) Power factor / >0.98 No-load power / 10W deactivated at output Input fuse / F1 (2x 7A-8A T)/250V (6.3x32mm) Transient surge protection / Varistor (8kA / 151J) Input connection / IEC/EN 60320, C14 Weight: 8.2 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, Wagner 756-EP360/60S polarity reversal unit, serial number: 603464 / 3x400V AC 50/60Hz - 360V DC 60A, unused, 100% functional, scope of delivery as shown in the photos. Bsdpfxoz Adh Ue Al Aswu

Condition: excellent (used), Year of construction: 2006, EMCO E65 TCM CNC turning machine Technical specifications •Manufacturer: EMCO •Model: E65 •Year of manufacture: 2006 •Machine number: R6EU1351 •Control system: Fanuc 0i •Bar diameter: Ø 65 mm •Axes: X / Z / C – 210 / 610 mm / 360° •Tool turret: 12 driven tool stations •Tool holder: VDI 30 Equipment •Bar loader •Chip conveyor •12 driven tool stations •VDI 30 interface Software options •Manual Guide i •Polar interpolation Bwodpszvpqhefx Al Aeu •Cylindrical interpolation •Helical milling

Condition: used, mileage: 29,135 km, power: 175 kW (237.93 HP), first registration: 02/2019, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, color: white, gearing type: mechanical, emission class: euro6, total length: 7,040 mm, total width: 2,490 mm, total height: 3,120 mm, loading space length: 4,000 mm, loading space width: 2,360 mm, loading space height: 500 mm, Year of construction: 2019, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Tipper, 2-sided with rear-mounted Hiab 078 X Duo crane with grapple attachment, floor control, no remote control. 2 x hydraulically extendable: at 2.30 m = 2.9 t, at 3.50 m = 1.92 t, at 5.10 m = 1.3 t, at 7.00 m = 0.96 t. Trailer brake, 2-line system Trailer coupling: central axle trailer G 145 Trailer socket 12V / 13-pole, trailer socket 15-pole, 7+7-pole Trailer socket 24V / 15-pole Standard cab Differential lock, rear axle Electric windows Tinted windshield Transmission - mechanical shifting Gearbox lock for auxiliary drive Hydraulic pump (Meiller pump - 7 pistons - 270 / 63) Heated air dryer Auxiliary drive MB 60-2C with MPA Configurable special module Frame overhang - extension Rear window Rear crossmember for trailer coupling (central axle trailer) Fuse box Seats in the cab: driver's seat, sprung comfort seat Seats in the cab: middle seat with seat belt Reinforced rear axle stabilizer (for extremely high loads) Underrun protection, side Emission standard EURO 6 Axle configuration: 4x2 Axle load, front axle: 5.3 t Approach/front mirrors Exhaust pipe to the center of the vehicle Exterior mirrors, electrically adjustable, left Battery 100 Ah Compressed air tank, steel Two-step entry Cab: S ClassicSpace Suspension: leaf spring / leaf spring Suspension: rear springs 8.1 t Suspension: front springs 5.1 t Generator 100 A Transmission 6-speed - type: G 90-6 Urea tank (AdBlue): 25 L Manually operated lift roof (steel) Rear axle, crown wheel 390 Info display 10.4 cm with additional display Body/superstructure: chassis Fuel tank: 120 L Engine 7.7 L - 175 kW R6 diesel (OM 936) Engine brake Engine compartment encapsulation Disc brakes, front and rear axles Seat cover / upholstery: fabric Seats in the cab: passenger single seat, fixed Splash guard, rear fender Tachograph / EC control unit Bsdozgquiepfx Al Aowu Daytime running lights, automatic Fixed rear underrun protection Front underrun protection Preparation for toll collection Immobilizer Wheelbase 3560 mm GVW 11,990 kg Net weight 4,040 kg Tires 265/70R19.5 70% Vehicle No. 2462 - For inquiries. Vehicle in very good overall condition, first owner, serviced. No liability for typing and data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers, and semi-trailers from the year 2000-2026. Leasing and financing possible through our partner bank. Rental possible. Nationwide delivery possible.

Condition: used, mileage: 29,135 km, power: 175 kW (237.93 HP), first registration: 02/2019, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, color: white, gearing type: mechanical, emission class: euro6, total length: 7,040 mm, total width: 2,490 mm, total height: 3,120 mm, loading space length: 4,000 mm, loading space width: 2,360 mm, loading space height: 500 mm, Year of construction: 2019, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Tipper, 2-sided with rear-mounted Hiab 078 X Duo crane with grapple attachment, floor control, no remote control. 2 x hydraulically extendable: at 2.30 m = 2.9 t, at 3.50 m = 1.92 t, at 5.10 m = 1.3 t, at 7.00 m = 0.96 t. Trailer brake, 2-line system Trailer coupling: central axle trailer G 145 Trailer socket 12V / 13-pole, trailer socket 15-pole, 7+7-pole Trailer socket 24V / 15-pole Standard cab Differential lock, rear axle Electric windows Tinted windshield Transmission - mechanical shifting Gearbox lock for auxiliary drive Hydraulic pump (Meiller pump - 7 pistons - 270 / 63) Heated air dryer Auxiliary drive MB 60-2C with MPA Configurable special module Frame overhang - extension Rear window Rear crossmember for trailer coupling (central axle trailer) Fuse box Seats in the cab: driver's seat, sprung comfort seat Seats in the cab: middle seat with seat belt Reinforced rear axle stabilizer (for extremely high loads) Underrun protection, side Emission standard EURO 6 Axle configuration: 4x2 Axle load, front axle: 5.3 t Approach/front mirrors Bjdpfszgqt Sjx Al Ajwu Exhaust pipe to the center of the vehicle Exterior mirrors, electrically adjustable, left Battery 100 Ah Compressed air tank, steel Two-step entry Cab: S ClassicSpace Suspension: leaf spring / leaf spring Suspension: rear springs 8.1 t Suspension: front springs 5.1 t Generator 100 A Transmission 6-speed - type: G 90-6 Urea tank (AdBlue): 25 L Manually operated lift roof (steel) Rear axle, crown wheel 390 Info display 10.4 cm with additional display Body/superstructure: chassis Fuel tank: 120 L Engine 7.7 L - 175 kW R6 diesel (OM 936) Engine brake Engine compartment encapsulation Disc brakes, front and rear axles Seat cover / upholstery: fabric Seats in the cab: passenger single seat, fixed Splash guard, rear fender Tachograph / EC control unit Daytime running lights, automatic Fixed rear underrun protection Front underrun protection Preparation for toll collection Immobilizer Wheelbase 3560 mm GVW 11,990 kg Net weight 4,040 kg Tires 265/70R19.5 70% Vehicle No. 2462 - For inquiries. Vehicle in very good overall condition, first owner, serviced. No liability for typing and data transmission errors. Subject to errors and prior sale. Daily cash purchase of used commercial vehicles, construction machinery, trailers, and semi-trailers from the year 2000-2026. Leasing and financing possible through our partner bank. Rental possible. Nationwide delivery possible.

Condition: good (used), machine/vehicle number: 50-14-05-3-23, We offer the following for sale here: Item number: 12878 Prince Technologies PrinCe 560 Capillary Zone Electrophoresis System Connections: Mains, HV control, parallel port A, parallel port B, Psxh8M Series port A (RS232), Series port B (RS232). Technical data: Injection method: up to 650 min, in 0.01 min steps; Hydrodynamics: 180 - 250 m bar, in 1 mbar steps, electrokinetics; -30 to + 30 kV, current and/or voltage Flow/pressure range: 0 to +3000 mbar from DCI device. Bedpfeu Eb D Hox Al Aowu Volt range: 30 kV to +30 kV Current range: -200uA to +200uA Rise: Programmable volt or amp rise Polarity reversal: Programmable before and during the sample run. Autosampler: Position carousel for 30/48 sample and buffer vials. Variable vial size, including Eppendorf micro centrifuge tubes. Buffer volume: Max. 4 ml Sample volume: Min 10ul, max 4 ml. Temperature control: sample and buffer 4 C to 40 C. Lapillary output: 5 C to below 60 C Detector: Allows the use of: UV/Vis, fluorescence, diode array, LIF, conductivity, electrochemical and MS. Year 2004 Model PrinCe 560 0500.022/CR S/N: 50-14-05-3-23 Dimensions:50x50x54 cm Weight: 35 kg without function test

Condition: ready for operation (used), Year of construction: 2008, Includes (1) 12x upright 2C815-80x50, 1825mm, RAL-2001 red orange, max. load per pair: 2.26t (2) 352x upright 2X1115-110x50, 2700mm, RAL-2001 red orange, max. load per pair: 3.0t (3) 78x shelf frame M80 5500x1100mm, RAL-5003 sapphire blue, already dismantled, on-site inspection is possible. Bwsdpeum U Srofx Al Aju

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection Bwodpfxeyrp Umo Al Aju • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour Bwedsv Dxw Repfx Al Aeu CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: ready for operation (used), functionality: fully functional, Condition: used / very good Availability: immediately Description: Keyence LJ-V7080 laser profile sensor (measuring head) from the LJ-V7000 series. Suitable for precise profile and height measurements. Scope of delivery: Bsdpjyx Spnefx Al Aswu measuring head LJ-V7080 only (without controller / without accessories) Location: Vöhrenbach - Germany Price: €800

Condition: used, Year of construction: 2002, This Knorr SL-2-V-E stack lifter is a robust and versatile solution designed for industrial environments. Built with a durable steel frame, it is specifically engineered to handle heavy loads and streamline workflows in paper processing. The stack lifter efficiently raises paper stacks to an ergonomic working height, making it ideal for operators using cutting machines or vibrating tables. Its adaptable design allows for use on both sides???whether feeding or removing stacks???enhancing flexibility and productivity in the workplace. Compatible with leading cutting machines such as Polar, Wohlenberg, and Perfecta, this stack lifter is a reliable addition to any industrial setting, ensuring smooth and efficient material handling. Manufactured in 2002, this unit is currently available from stock in Germany. Format: Equipment: Robust steel frame construction for industrial loads Stack lifter Stack lift for cutting material: Paper stacks are brought to working height Ergonomic working height for operators on cutting machines or vibrating tables Suitable for cutting machines such as Polar, Wohlenberg, Perfecta Can be used on both sides ??? for feeding or removing stacks of paper Bwjdpjvlx H Iefx Al Aeu

Condition: new, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for powering the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Bsdpfx Aevyzqfel Aewu Modular system, all driven tools are from WTO, Made in Germany incl. ejection of long parts Scope of supply: FANUC Oi TF+ CNC control with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bushing unit Guide bushing type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling unit for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining, 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece remover Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Tool box with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard scope of supply: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hours display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: new, Nexturn SA32B with the following attachments: - Loading magazine Iemca Boss 338 Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for supplying the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. discharge of long parts Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bush unit Guide bush type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling device for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear face machining Rear face machining with 4 machining stations ER16) Drive unit for tools for rear face machining on 2 stations fixed and 2 stations driven Bwjdpfjvyzp Iex Al Aeu Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece ejector Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adjustment up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar loader magazine Interface for chip conveyor PCMCIA card slot USB interface RJ-45-LAN interface RS 232 C interface Control functions in standard scope of delivery: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hour display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread milling with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main spindle and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: used, Type SD 15 / 35 . Technical data : Length: 350 mm width: 150 mm Bwjdpfx Aszzlnajl Aeu Polarity ~ 9 mm . Space requirement approx.: L:440 x W:210 x H:135 mm . Voltage: 24V Current: 2,04A

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Bodpfx Asxn A Spsl Aswu Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), functionality: fully functional, mileage: 809,518 km, power: 382 kW (519.37 HP), first registration: 03/2007, fuel type: diesel, empty load weight: 14,670 kg, maximum load weight: 17,330 kg, overall weight: 32,000 kg, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,700 mm, axle spacing: 3,700 mm, next inspection (TÜV): 02/2027, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,300 mm, total width: 2,520 mm, total height: 3,600 mm, Year of construction: 2007, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, full service history, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, trailer coupling, truck registration, Model: VOLVO FH520 -37 8X4 JOAB Hooklift + Steering Axle, Leaf/Air Suspension First registration: 23.03.2007 Mileage: 809,518 km (original)? Engine power: 382 kW (520 HP) JOAB hooklift system Type: L24 5690 AC with remote control (not tested) Tipper hydraulics (PTO) Parking heater Antennas Radio/Cassette/CD/MP3 Air conditioning Air-suspended seat with seat heating and full adjustability 1x bed Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beam Warning light Toolbox Aluminum fuel tank Transmission: Automatic Tank: Diesel (450 liters) AdBlue (60 liters) EURO 5 Axle configuration: 8x4 Lift axle and steering axle Differential lock Wheelbase between axle 1 and 2: 3,700 mm Wheelbase between axle 2 and 3: 1,370 mm Wheelbase between axle 3 and 4: 1,380 mm Tire size axle 1 (front): 385/65R22.5 Tire size axle 2 (rear): 315/80R22.5 Tire size axle 3 (rear): 315/80R22.5 Tire size axle 4 (rear): 385/65R22.5 Leaf/Air suspension Wheel covering Retarder/Intarder/Engine brake Unladen weight: 14,670 kg Payload: 17,330 kg Gross vehicle weight: 32,000 kg Vehicle dimensions (L x H x W): 930 cm x 360 cm x 252 cm Container platform length: 6.4 m Bwodpfez Hwm Aox Al Aju Plough mounting device on right side and front New TÜV and emissions certification possible by arrangement and at additional cost! You are welcome to contact us for more information and pictures via WhatsApp, Telegram, Viber, and Signal. We speak German and English, but feel free to send us a message in your language! Trade-in possible! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates on request! We also support you with export, original data confirmation for local type approval, supplier's declaration, export document preparation, and customs plates if required. Viewing and test drive possible at any time, including weekends, by prior telephone arrangement! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and features of the goods/vehicles. All information provided without guarantee. Subject to changes, prior sale and errors.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm), towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Braking System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated via reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration / License Plates Germany With DEKRA inspection and certification (in accordance with §13 EG - FGV) 24/7 Service Hotline Bwjdpfx Alozfp Uxs Aou Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Hot-dip galvanized frame, including passivation “15-year warranty against rust-through” Drawbar: galvanized or black, at the manufacturer’s discretion Customized transport solution

Condition: excellent (used), Catalog number 8114 TECHNICAL DATA - Working length of the shelf: 3070 mm - Working width of the shelf: 1030 mm - 4 working stations - Max. thickness of bonded components: 150 mm - Automatic rotation - 6 hydraulic cylinders per working station - 3 pressure plates per working station (from the front) - Overall dimensions (L/W/H): 5200x2450x2600 mm - Weight: approximately 6000 kg Bsdpsz Earrefx Al Aowu ADVANTAGES - German-made - 4 working stations - Rotatable - Used machine, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with significant exchange rate fluctuations)