Used Probe Stylies & Accesories for sale (1,527)

Year of construction: 2023, condition: new, Technical data of the briquetting press: Throughput: 30-60 kg/h The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube holder for the briquetting press - Viewing window in the container Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must ensure protection against hydraulic oil leakage Gedpskuz Tuefx Adcsbp - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.

Condition: used, Year of construction: 2002, operating hours: 14,704 h, functionality: limited functionality, machine/vehicle number: 15115220654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 660 mm, controller model: Heidenhain iTNC 530, workpiece weight (max.): 2,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 660 mm Rotation B-axis: 105° Spindle speed: max. 18,000 rpm Interface: SK40 Table size, length: 2,600 mm Table size, width: 600 mm Workpiece weight: max. 2,200 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions and weight Dimensions (L x W x H): 6,000 x 3,700 x 2,900 mm Dry weight: 12,500 kg Operating hours: 14,704 h EQUIPMENT Fourth axis with 550 mm clamping surface and hydraulic tailstock Gbodpfx Adozdd Tnscsp Heidenhain measuring probe Spindle cooling Measurement log Coolant tank Filter separator Documentation CE marking Note: Machine vices are not included. The machine is not immediately ready for operation and requires minor repairs. A linear field segment is causing problems.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 845 mm, bar diameter (max.): 67 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: 840 D, number of slots in tool magazine: 48, swivel angle B-axis (min.): 110 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. • CNC control: Siemens SL Operate 3G, 1 channel, without CELOS • Configuration: Counter spindle ISM 52 with C-axis (instead of tailstock) • Tool magazine: Chain magazine for 48 tools, HSK 63A Godpfox H U Ezox Adcsbp • Coolant system: 8/20 bar, 600 l tank • Chuck rinsing for main and subspindle • Coolant supply to counter spindle Additional equipment • Workholding: • Main spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Counter spindle: 3-jaw chuck SMW BBD210-66 and DMG TCC 65 collet chuck • Chip conveyor: Hinge type • Preparation for mist collector • Bar machining package Ø 67 mm • Tool measurement probe: Blum B-H7210 • Approx. 40 toolholders (to follow) Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,862 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 96, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2023. It features an impressive X-axis travel of 670 mm, Y-axis travel of 830 mm, and Z-axis travel of 600 mm. The machine includes a table diameter of 800 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. • Control Unit: Heidenhain TNC 640 • NC Software: 340590 16 SP3 Hotfix4 • A-Axis Swivel Range: -120° to +120° • B-Axis Swivel Range: +110° / -110° • C-Axis Rotary Table: 360° Continuous Rotation • Table Diameter: 800 mm • Spindle Taper: HSK-A63 • Tool Holder: HSK-A63 • Air Through Spindle • Linear Measuring System: Heidenhain X, Y, Z • Rotary Measuring System: Heidenhain • Heidenhain DXF Import • Heidenhain OCM Option • Oil Cooling for 4th & 5th Axis • Spindle Cooler • Electrical Cabinet Air Cooling • Network Connection • USB Port • Collision Avoidance: POS DCM Collision Module • POS Kinematic Module incl. Reference Ball Gbedpfjzhu S Uex Adcep • Infrared Workpiece Measurement: 3D Probe • Tool Measurement: BLUM Laser • Workpiece Measurement Preparation • Rotary Viewing Window • Hinged Belt Chip Conveyor (Optional, Not Included) • Professional Chip Conveyor with 40 Bar Internal Coolant Supply • Coolant Pump (Head): M-Function Controlled • Coolant Flush Pump • Hand Wash Gun • Water Gun • Chip Flush System • Single Compressed Air Connection in Table Centre • Hydraulic Unit • Mobile Electronic Handwheel • Rated Power: 90 kVA • Rated Current: 125 A • Maximum Current: 200 A • Short-Circuit Rating: 25 kA • Power Supply: 400 V / 50 Hz • Spindle S1 Time: 1,861 h 59 min 58 s • Single-Shift Operation Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, CNC Vertical Machining Center DECKEL MAHO DMC 100 V For sale is a CNC-controlled vertical machining center, DECKEL MAHO DMC 100 V, with Heidenhain control. This machine is ideally suited for tool and die making, single-part production, and general CNC milling operations. Technical specifications: Manufacturer: DECKEL MAHO / DMG Type: DMC 100 V Control: Heidenhain Travel distances X/Y/Z: approx. 1000 / 800 / 500 mm Table size: approx. 1250 × 800 mm Max. table load: approx. 1200 kg Tool holder: SK40 / ISO40 Tool changer: 30/60 positions, depending on the model Spindle speed: up to approx. 15,000 rpm Equipment: Heidenhain CNC control Tool changer SK40 tool holder Renishaw measuring probe Gedpezh Hxmofx Adcjbp Coolant system Chip conveyor Condition: Used Machine is complete Inspection under power possible by arrangement.

Condition: excellent (used), Here, we offer you an Iridex laser system, the OcuLight SLx. Laser IRIDEX Oculight SLx Tri-Mode 810 nm Diode Laser Description: Designed for longevity, with a thermal management system to increase the efficiency and reliability of laser conversion. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The tri-mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems offer a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repeated exposures. The LongPulse mode delivers laser energy over longer periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of the thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top unit Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Gbodpfxozd Uubo Adcop Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot-SLAs, LIO and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required. Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also has some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractive glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser-indirect ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in the supine position. It is considered to have a unique optical design in the industry, which eliminates the need to adjust the laser focus and allows for a wide range of working distances. Type: Iridex OcuLight SLx Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Mahr Here we offer you a Helio-Pan II. Max. workpiece weight 30 kg at a center height of 100 mm 80 kg at a center height of 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable throw: 100 mm Center height: 100 mm Measuring blades/probe and caliper: 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Type: Helio-Pan II 700 Scope of delivery: (See image) We will gladly answer any further questions you may have over the phone. Gbodozd R U Dspfx Adcep Written orders can be placed via email or fax.

Condition: ready for operation (used), Year of construction: 2008, A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Gbedjzli Tuepfx Adcjp

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock Number 1039-8700 Machine Type Machining Center - Vertical Manufacturer DECKEL MAHO Type DMU 125 T Year of Manufacture 1998 Gbodpfx Adszfzhdocjp Control TNC 426 Heidenhain Location D-59302 Oelde Country of Origin Germany Delivery Time Upon Agreement Incoterms EXW (Ex Works) Additional Information CNC - Vertical Machining Center DECKEL MAHO - DMU 125 T - Coolant Through Spindle (CTS) Technical Details X-axis travel 1,250 mm Y-axis travel 880 mm Z-axis travel 800 mm Control TNC 426 Heidenhain Main Spindle: Spindle Speed Range - Main Spindle max. 12,000 min/-1 Drive Power - Main Spindle 15 / 10 kW Max. Torque 500 Nm Tool Interface SK 40 Work Table: Table Surface Area 1,500 x 1,050 mm Max. Table Load 2,500 kg Number of T-slots 10 T-slot Width 18 H7 mm T-slot Spacing 100 mm Tool Changer: Number of Tool Positions 30 Max. Tool Diameter 80 mm Max. Tool Diameter with Free Neighboring Position 160 mm Max. Tool Length 315 mm Max. Tool Weight 8 kg Max. Total Weight 100 kg Feeds: Rapid Traverse (X / Y / Z) 15 m/min Feed Rate 10,000 mm/min Total Power Consumption 29 kW Machine Weight approx. 16.0 t Space Requirement approx. 7.0 x 5.0 x 3.3 m Accessories Documentation Chip Conveyor Coolant System High-Pressure Cooling Internal Coolant Supply Tool Changer Measuring Probe Heidenhain Electric Handwheel

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. This coordinate measuring machine is designed for measuring large workpieces. Gbodpfxjzd N Shs Adcop Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control system, rotary/swivel probe & probe changing library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control system from RENISHAW SPA2 servo power amplifier UCC2 controller Type: Johansson Cordimatic 7000 coordinate measuring machine Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone.

Condition: used, mileage: 432,200 km, power: 331 kW (450.03 HP), first registration: 05/2019, fuel type: diesel, empty load weight: 12,100 kg, maximum load weight: 13,900 kg, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, parking heater, trailer coupling, Manufacturer: Scania - Type/Model: G450 - First registration: 05/17/2019 - Mileage: 432,200 km - Number of axles: 3 - Emission class: Euro 6 - Cab: M - Transmission: Automatic - Auxiliary brake: Retarder - Suspension: Air suspension - Lift axle - Steerable axle - Brakes: Disc brakes - Air conditioning - Unladen weight: 12,100 kg - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 18,000 L - Number of tank compartments: 4 - System designation: Schwarte V2000 system - Stainless steel centrifugal pump - Ultrakust MAK 3002 plus - Sampling probe - CIP cleaning system - Dome-shaped sump - Rear cabin Godpfxszk Rdfj Adcsbp

Year of construction: 2011, condition: ready for operation (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 BF 150 LCD with smartTNC, Mousepad, and DXF-Converter, overall weight: 45,000 kg, spindle motor power: 28,000 W, spindle speed (max.): 4,000 rpm, table length: 9,950 mm, table width: 1,150 mm, number of axes: 5, This 5-axis KIHEUNG RIGITRAX X 8000 was manufactured in 2011. It features an impressive X-axis travel of 8000 mm, Y-axis travel of 1350 mm, and Z-axis travel of 2000 mm. The machine is equipped with a powerful 28 kW spindle motor and a 40-fold tool changer for efficient operations. If you are looking to get high-quality milling capabilities, consider the KIHEUNG RIGITRAX X 8000 bed type milling machine we have for sale. Contact us for further details. - Main Computer: MC 422 C with Software option 1 & 2- Table Length: 9950 mm- Table Width: 1150 mm- T-Slots Surface: 9 x 22 / 10 x 22 nr. x mm- T-Slots Distance: 125 mm- T-Slots Front Surface: 2 x 22 mm- Max. Table Load: 3500 kg/qm- Feed Rate (all 3 axes): 10000 mm/min- Rapid Traverse (X, Y, Z axes): 16000 mm/min- Feed Power X-Axis: 70 Nm- Feed Power Y-Axis: 27 Nm- Feed Power Z-Axis: 50 Nm- Spindle Taper: ISO 50, DIN 69871- Spindle Speed Range (2 Steps):- 1st Step: 0 - 1000 U/min- 2nd Step: 1001 - 4000 U/min- Main Spindle Motor Power (100% / 60%): 28 / 38 kW (SIEMENS Main Spindle Motor)- Axis Drives: AC-Drives SIEMENS- Coolant Tank Volume: 500 l (without through-spindle cooling) / 1500 l (with through-spindle cooling - 2 pumps)- Linear Measuring System: HEIDENHAIN scales with DA 300 compressed air system- Spindle Gearbox: ZF reduction gear, 2-speed (1-1000 / 1001-4000 rpm), cooled- Milling Head: Universal Automatic Milling Head A 4 Plus, "HURON" system, cooled, bi-rotational 2.5° x 2.5°, programmable and automatic positioning in 2.5° of the 45° and 90° planes (5-axis simultaneous / indexing preparation)- Tool Changer: 40-fold vertical/horizontal chain-type system, driven via servomotor, HEIDENHAIN encoder monitoring- Through-Spindle Coolant (CTS / IKZ): 16 bar high-performance cooling system with paper filter (DEUBLIN rotary union, 16 bar for spindle, 8 bar for 6 coolant nozzles at spindle nose)- Coolant Tanks: 2 tanks (1200 l clean tank and 500 l pre-tank) with paper band filter system (500 mm paper width, 10 micron filtration fineness)- Chip Conveyor: Wide hinged belt conveyor X 8000 rear-side, elevated discharge- Measuring Preparations: Prepared for TS 220 workpiece touch probe and TT 140 tool touch probe- Additional Features: Hydraulic counter-weight balance in Z-axis, spindle orientation for rigid tapping, PLC prepared for 4th axis, automatic taper blow-out unit (A2 + A4 head), automatic central lubrication, electronic portable handwheel HEIDENHAIN HR-410, Ethernet interface, automatic Power-Off- Machine Enclosure: Partial machine enclosure with 2 front doors for X 4000 or 4 front doors for X 6000 - X 8000- Paint Finish: Light grey RAL 7035, Carmine red RAL 3002 Gbedpfjzhmn Uex Adcep

Condition: used, Year of construction: 2011, Technical details: x-travel: 6500 mm y-travel: 2000 mm z-travel: 1500 mm rapid travel x/y/z: 25 m/min table-size: 8.000 x 1.300 mm table load: max. 2,5 t/qm universal head: orthogonal 1° x 1° tool taper: SK 50 milling head speed: 4.000 1/min power capacity: 32 kW max. torque on the spindle: 910 Nm control: HEIDENHAIN iTNC 530 Tool changer: 40 Pos. total power requirement: 75 KW dimensions of the machine ca.: 10,7 x 5,2 x 4,6 m weight of the machine ca.: 30 t universal travelling column - universal machining center, orthogonal milling head, with 2,5° indexing, oil-air lubrication, 3D touch probe M&H 20.41, moveable operator-cabin/panel, chipconveyor, el. handwheel, LUBRIX MQL, Gbsdjzipkhepfx Adcsp 2pcs. clamping angle 1.000 x 400mm, approx. 29.800h "machine on", approx. 11.000h "spindle on" still under power in closed factory *

Condition: reconditioned (used), CNC Vertical Machining Center HERMLE B 300 V With Heidenhain iTNC 530 path control Year of manufacture: 2014 Travel ranges: X 800 Y 600 Z 500 Speed range: 20 – 15,000 rpm, stepless With the following accessories: Fixed angular table, 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Air blow through the spindle center IKZ 40 bar Chip conveyor BLUM tool breakage/measurement system Coolant system Manual cabinet door, manual cabinet roof Polycarbonate safety screens Gbjdey U H Iqepfx Adcep Electronic thermal compensation iTNC 530 Electric hand control module HR 410 3D measuring probe Control cabinet cooler (RITTAL) Spindle oil cooler Oil mist extraction Chip flushing gun 4 adjustable machine feet Operating manuals

Condition: used, Year of construction: 2007, Technical details: x-travel: 730 mm y-travel: 560 mm z-travel: 560 mm turning speeds: 18.000 1/min control: HEIDENHAIN iTNC 530 tool adaptor: SK 40 tool magazin:: 24 Pos. total power requirement: 52 kVA Godpsy T Rq Hefx Adcsbp weight of the machine ca.: 6,7 t 5-axis simultaneously, NC-roundtable (dia 600mm) integrated in rigid table (1.000 x 600mm), max. table load 500kg, controlled NC-milling head (B-axis), -120 to +30°, 3D touch probe TS 640, BLUM laser, el. hadwheel, mode 4, safety package for power failure, chipconveyor, NO INTERNAL COOLANT SUPPLY ! approx. 87.000h "machine on", approx. 15.000h "program run" latest known spindle change: 2022 *

Condition: used, Year of construction: 2012, Technical details: x-travel: 2600 mm y-travel: 1100 mm z-travel: 900 mm table surface area: 3200 x 1100 mm rotary table diameter: 1050 mm table load: 1,2 t control: Heidenhain iTNC 530 HSCI ergoline 19" turning speeds: 20 - 14.000 1/min taper ISO: SK 40 tool change unit: 30 Pos. rapid traverse: 40 m/min spindle: 14 / 19 kW total connected load: 46 kVA weight of the machine ca.: 25 t dimensions of the machine ca.: 6,70 x 3,40 x 2,95 m 5-axis universal machining center, rigid table with integrated NC-rotary table left side and B-axis in milling head, direct measuring system, Swarf Conveyer, Rotoclear Gedpfx Adoy T Ndrscsbp 3D Touch probe HEIDENHAIN TS 649, BLUM laser, mode 4, prepared for 3D quick set (software yes, hardware no), NO INTERNAL COOLANT SUPPLY (upgrade on request, additional costs 15.000€) approx. 70.500 h machine on, approx. 14.000 h Programm run last known spindle change in 2021 *

Condition: good (used), HSK Tools for CNC Milling Machines + Marquardt Shrinking Device – Assortment Various tools with HSK interface from industrial use are for sale, suitable for CNC milling machines. 🔹 Scope of the offer: Extensive assortment of tools with HSK interface, including: - Drills - Milling tools - Measuring probes / touch probes Tools predominantly from well-known manufacturers, including Kennametal. Large quantity – ideal for manufacturing companies, workshops, or resellers. Condition and scope as shown in the photos. 🔹 Also included in the offer: Gjdpfx Asynhxcjdcsbp Shrinking device – Marquardt Spanntechnik - Manufacturer: Marquardt Spanntechnik - Device Type No.: 32257-M437 - Type: 047.032.0.0.0 - Electrical connection: 400 V / 50–60 Hz - Maximum fuse: 16 A ➡️ The shrinking device is fully functional and can be purchased separately or together with the tool set. 🔹 Optional: Storage cabinet with inserts for organized storage of a large number of tools – also available for purchase (see photos). 📦 Sale: Preferably as a complete lot. Individual sale possible upon request. Sold as shown; please refer to the photos for details.

Condition: reconditioned (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 Multisensor Measuring System equipped with camera, laser, Renishaw probing system, and Hexagon Vision 3D software (upgrade to Windows 11 and OptiCheck3D 2025 possible) Gedpfexufk Uex Adcjbp Complete maintenance history available Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Delivery via factory service or forwarding agent, worldwide. Online or optional on-site demonstrations with customer parts, application-specific consultation by accredited Profitech metrology laboratories during project planning. Comprehensive service: – Delivery, installation, commissioning, accuracy verification to standard, certification, and extensive acceptance documentation. Individual training and education programs also available as online courses. Rental, hire-purchase, or financing available directly through Profitech without a financial institution. Measuring system can be individually configured to customer requirements. Measuring range for all sensors: 400x400x200 mm Dimensions: 800x1000x2000 mm Weight: approx. 800 kg Maximum load (glass plate): 30 kg Accuracies: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measuring length in mm) Max. traverse speed: 250 mm/s Including camera Including rotary table Including laser Including LED ring light Including new frame grabber Including dual-monitor operation Including CNC control and PC Including Hexagon Vision3D software

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation Gbsdpfxedyc Uaj Adcsp · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 95 kg, - Leasing options available!!! - Modular expandable basic contour measuring system, Z-axis measurement direction downwards Optional functions expandable via software update: - Up/Down measurement direction switch - Roughness measurement - QR code scanner (for probe arms and reference parts) - Data export to QS-Stat (dfq data) - Dominant waviness - Free commissioning and training within a 150 km radius - - Free software update for contour software Scope of delivery: - Complete mechanics with Y-axis adjustment table (17 mm travel) - Integrated controller - PC W11/64-bit; 24" TFT flat screen - ConturoMatic software; operating manual - Dust cover, robust design, water-repellent Technical data: Measuring range X 250 mm Gjdpozict Aefx Adcsbp Measuring range Z 320 mm Resolution 1 nm Measuring systems: optical incremental System accuracy +/- (0.9 µm + L/100) µm * [L = mm] Probe force control Measuring speed 0.1 - 3.0 mm/s, automatically optimized Positioning speed up to 25 mm/s Table load capacity 35 kg Precision guide on hard stone base Weight 95 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 800 mm, Measuring range X-axis: 1,000 mm Y-axis: 2,000 mm Z-axis: 800 mm Granite guideways Air-bearing axes Measuring accuracy Length measurement deviation: approx. 1.3 µm plus L/400 depending on the design and calibration status Probing systems Renishaw probing heads are possible Touch trigger and scanning PH10, TP20, SP25, SP80, depending on the configuration Gbjdpfxsy Ewgxj Adcop Workpiece weight Permissible table load up to approx. 2,000 kg depending on the design Control CNC control with hand-held operator unit Software Metrosoft CM Version 3.112 WENZEL Quartis R16 Electrical supply 230 V, 50/60 Hz Power consumption: approx. 1 kVA Pneumatic supply Compressed air, 6 to 10 bar filtered and dry

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard Godpfx Aevvudkjdcsbp The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program 3D software • Metrosoft CM 3.8

Condition: used, Year of construction: 2000, x-travel 760 mm y-travel 550 mm z-travel 300 mm Control RMS6V3.15 tool change unit 25-fach tool taper HSK E40 turning speeds 42.000 U/min table-size 860 x 550 mm table load 800 kg total power requirement 14 kW weight of the machine ca. 5200 kg dimensions of the machine ca. 2,5 x 2,1 x 2,55 m 3-axis high-speed machining centre, Roeders RFM760, year of manufacture 2000, installation in 2001 Key specifications: Roeders RFM760 high-speed machining centre with accessories (tool holders, tool shrink-fitter, etc.). The machine is fully operational, well-maintained, serviced and powered up (battery maintenance). • Spindle: Newly fitted in December 2022, in use until March 2023 – Estimated running time approx. 75 hours (de-registered by the company in March 2023) • Control system: Röders, software: RMS6V3.15 (211) • Operating system: Windows NT • Complete system updates approx. 2010 and 2016 • TFT screen The machine has been used exclusively for electrodes (primarily graphite and copper) and finishing of mould inserts – no roughing! The machine is available for viewing at any time and is ready for immediate collection. Specifications for the Roeders RFM 760 high-speed cutting centre - 25-position tool changer with laser tool measurement (length and diameter) - ISO spindle mount: HSK E40 - IR 3D probe (for workpiece measurement) - Dust extraction (graphite) - Cooling unit - Spray cooling for tool / workpiece - Roeders tool shrink-fitter - Fischer MFW-1230/42 spindle (42,000 rpm), new in December 2022 Gedjzhn T Eepfx Adcjbp - Fixed chuck, new in 2022 - Accessories: milling cutter chucks, consumables, ...

Year of construction: 2025, condition: new, functionality: fully functional, This is the latest generation iVario Pro 2-S from the premium manufacturer Rational, model year 2025. The iVario 2-S is new, unused, an exhibition model, and comes with a 1-year manufacturer's warranty. Installation by a Rational service partner extends the warranty up to 2 years. This multifunctional tilting frying pan is equipped with the optional pressure cooking feature. The base / accessory package can be purchased for an additional cost. The list price (MSRP) for the iVario 2-S is: Net: €20,530 = Gross: €24,430. The list price (MSRP) for the base is: Net: €2,328 = Gross: €2,770.32. The list price (MSRP) for the basic accessory package is: Net: €1,002, Gross: €1,192.38. We offer special prices upon request! The unit has been inspected for functionality in our in-house workshop. You will receive an invoice with VAT shown. Service: We will gladly assist in arranging a certified Rational customer service technician nationwide. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our device service for you: Up to 2 years manufacturer's warranty High-quality branded devices at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-pickup options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: 1100 x 938 x 485 mm Power connection: V: 400 / kW: 20.5 / Hz: 50 Serial number: E11PK25078093595 Year of manufacture: 2025 Weight: 134 kg Capacity: 2 x 25 liters Servings per batch: 50-100 Condition: New, unused, fully functional Gbsdpfx Adozg T Rmjcjp Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, dairy and desserts, soups and sauces, or the 5 cooking processes: boiling, frying, deep-frying, stewing, and finishing. iZoneControl: flexible division of the pan base into zones with different temperatures Low-temperature cooking (also overnight), confit, sous-vide cooking Vario Cooking Control mode: the desired result of the product is selected with a touch of a finger, e.g. from light to dark. Vario Boost: patented heating system for absolutely uniform and precise temperature transfer. Programming mode: Creation of manual programs and management of cooking processes Integrated WiFi interface, e.g. for connection to ConnectedCooking Additional information: With optional pressure cooking function Integrated hand shower with automatic retraction and spray dosage High-quality pan base Seamless with rounded corners Core temperature probe with 6 measuring points 1,200 programs with up to 12 steps each, programmable and can be named Integrated hose shower on the device, integrated water drain in the pan Temperature unit can be set in °C or °F Cooking pan can be tilted Lid with integrated water inlet Automatic display of service messages IPX5 splash water protection USB interface for HACCP data output and updates Shipping: Delivery or self-pickup by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors

Condition: excellent (used), Year of construction: 2013, Control: Heidenhain iTNC 530 Traverse path X: 635 mm Travel Y: 510 mm Z travel: 460 mm Spindle speed: 10,000 rpm Spindle power: 13/9 KW Tool holder: SK 40 Pallet size: 800 x 500 mm Pallet load: 400 kg Tool changer: 30 places Rapid traverse: 30 m/min 3D measuring probe TS 649 Table probe Rinsing gun handwheel Gbjdpstk Nzbefx Adcep Linear scales