Used Protec Optical Sorter Protec - Duett 100 for sale (26,964)

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 controller, serial number: 5765, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Bodpfx Alei Ebhpo Aowu

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Bodpsy Tlzajfx Al Aowu

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C Bjdpfsy Hkd Hex Al Aswu - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h Bwjdpfx Alszldw Ij Aou for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: good (used), Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (Type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed across 4 levels, each accommodating 3 Euro-pallets side-by-side with a bay width of 2,700 mm). The system consists of 1 starter bay and 7 add-on bays, resulting in a total length of approx. 22 meters. Thanks to the grating decks, the racking is extremely versatile—suitable for general cargo, order-picking stock, or damaged pallets. Included push-through guards and rear mesh panels ensure maximum safety. They provide perfect protection against pallets or loads being pushed through accidentally or falling off. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Bsdozrlp Sjpfx Al Ajwu Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Levels: 4 (including floor level) Beam type: INP 100 Bay load: 3,000 kg Section load: 14,000 kg Scope of delivery: 09 x Upright frames 6,200 x 1,200 mm (blue) 48 x Pallet rack beams 2,700 mm (red) 24 x Push-through guards 2,700 mm 32 x Rear mesh panels 2,700 x 1,200 mm 48 x Grating decks 1,330 x 1,200 mm Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (DIN EN 15635) Safety is a legal requirement. We conduct the annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Issuance of a legally compliant inspection report and inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Bwsdpfx Alozp Ew Ds Aju - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: used, This listing is for Amersham BPG Chromatography Column 100/500 The unit is in full working condition and ready for immediate use. This lab-scale column offers high-performance fluid dynamics and scalable design, making it ideal for robust downstream processing and reliable chromatographic separations in professional laboratory environments. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Bwsdszqf Dmepfx Al Aju For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 100 t, stroke length: 200 mm, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Bwodpezta A Aofx Al Aou Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Working Length3100 mm Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Bwedpfozimaaex Al Aju Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Bwjdpozizl Rsfx Al Asu Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1998, offer consist of: - expansion kit right conveyor CTK-100 Horizon CTK-100 c-Tower Kit extra function: collating to both sides - compatibel with: Horizon VAC-100a Horizon VAC-60Ha - weight: 5,52kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs Bsdpfx Alozwl A Ao Aowu

Condition: used, Year of construction: 2004, Horizon VAC-100m Air-Suction Collator Tower The VAC-100m is the ideal solution for print shops looking to expand their production capacity without investing in completely new systems. Its easy integration with the VAC-100a tower and high reliability make it a valuable addition to your production line. Key Features: Cost-efficiency: The VAC-100m is a cost-effective expansion solution as it operates without its own display and control unit. This reduces acquisition costs and allows you to expand existing systems efficiently. Expandable Capacity: With the ability to connect up to 5 VAC-100m towers to one VAC-100a tower, you can flexibly expand your collating capacity to up to 60 stations. This enables efficient handling of large jobs and a significant increase in your production capacity. Reliability: With error prevention features such as misfeed, double-feed, and jam control, the VAC-100m ensures that your production runs smoothly and without interruptions. Specifications: - Technology: Touch & Work (via VAC-100a) - Number of stations: 10 per tower - Expandability: Up to 6 towers (60 stations) Bwsdjzv Ruzjpfx Al Aeu - Error prevention: Misfeed, double-feed, and jam control - Job memory: 9 storage slots for repeat orders - Programs: Double cycle (non-stop operation), sheet insertion (single and double), booklet making program, block program, selective collating - Sheet size: Max. 500x350 mm; Min. 148x120 mm - Paper weight: 40-250 g/m² - Loading capacity: 55 mm per station - Performance: Up to 9,500 sets/h - Power: 230V; 50/60Hz - 1.86 kW - Dimensions: 842x652x1,961 mm - Weight: 310 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Revolutions per minute 1400 Voltage 3x400V-50 Hz Power (kW) 3 Disc size, drive wheel (ø mm) 200x100x28 Sanding belt (mm) 100x1600 Bjdezuv Iqjpfx Al Aswu Pipe dimension (ø mm) 21-76 Extraction capacity (m³/h) 600 With extraction Length (mm) 1430 Width (mm) 810 Height (mm) 1350 Net weight (kg) 205 The Scantool 100 RSX is the perfect pipe grinding machine for all types of pipes and profiles. It simplifies welding and provides a better finish. The Scantool 100 RSX has been designed with serial production in mind, where precision and clean work are required. It is used in the manufacture of railings, frames, go-karts, lattice trolleys, wheelchairs, ship fittings, handrails, gates, doors, furniture frames, and stainless steel pipe and profile work for the food industry, among other applications. The Scantool 100 RSX grinds pipes and profiles made of any material with a diameter of 21 to 76 mm. Integrated extraction The Scantool 100 RSX features an integrated extraction system that removes most of the grinding dust from the sanding belt. When the Scantool 100S is mounted directly behind the grinding machine, the best possible dust collection solution is achieved. The Scantool Cyclone 100S is available as an option. The Scantool pipe grinding machine, model 100 RSX, offers the following advantages: • The only pipe grinding machine on the market where the grinding unit is adjusted to the desired grinding angle. • Therefore, it does not require any lateral space when grinding long pipes. • Every angle can be adjusted quickly and easily – without tools. • Precision grinding of pipes and profiles at all angles. • Perfect adjustment of the contact roller to the desired diameter. • High quality and robust side guide. • Extremely well suited for serial production.

Condition: used, Haffner SL100 door lock milling machine for simultaneously: Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Technical data: Bwjdpoztvw Njfx Al Aju - Chain cutter motor: 1.7 kW - Rebating cutter motor: 0.6 kW - Drill motor: 0.25 kW - Blade length: 150 mm - Chain width: 12–17 mm

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Bedpjzfac Tjfx Al Ajwu Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) X axis 32 x 5 mm Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Tailstock quill diameter 112mm / 4.4" Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Bwjdpfx Ajx Uqb Ijl Aeu Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: good (used), Included in delivery: 1x post protector, used Manufacturer: Nedcon Material color: blue Total height: approx. 900 mm Post protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg dimensions: approx. 65 x 65 mm Deflector height: approx. 50 mm Hole spacing: approx. 60 mm Hole diameter: approx. 11 mm Suitable for frame profile width: 100 mm Including mounting hardware Consisting of: 4x hexagon screws M 10 x 35 mm 4x hexagon nuts M10 8x washer M10 Your contact person: Bwodpov N Twvjfx Al Aju Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional shipping or transport of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Z-travel 660 mm Loading time (depending on clamping device) 1 – 2 sec. Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Bwsdpfxsvz S Sis Al Aeu Rapid traverse speed, Z 60 m/min. Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 4,278 h, load capacity: 10,000 kg, lifting height: 5,400 mm, free lift: 1,710 mm, fuel type: diesel, mast type: triplex, construction height: 3,008 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Mast Type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical Condition: Normal Bwodpsv R Nmcefx Al Asu Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Rear Tires Condition: 60 - 80% Sideshift, Fork Positioner, 3rd Valve, 4th Valve

Condition: used, REPEATED ITEM Garner Denver maybe Elmo Rietschle V-VTA 80 vacuum pump V-VTA pumps developed by Elmo Rietschle for continuous operation for printing and paper handling machines. V-VTA pumps come with bearings on both sides of the rotor. Flange mounted motor with bolt coupling. V-VTA offers high efficiency, silent operation, easy to operate and service. Sound cover allows a ducted cooling air outlet either from one side only or from both front and back. Also infomration on this site SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFPR017 Listing name: GARNER DENVER VTA 80 C 100 Vacuum Pump Bodpfx Ajxziatol Aswu

Condition: used, diameter / mm Cutting (quantity) / 0 Bedpfxsymqtme Al Aewu weight / kg

Condition: good (used), Technical data for the pallet rack beam: Racking system: Dexion (Hovik) Type: P 90 Included in the delivery: Bsdpfx Alew R N Hyo Aswu 01x pallet rack beam, used Material color: white I-profile: 100 x 50 mm Connector: 5 HK Clear span: 1,800 mm 02x safety pins, used Version: Sendzimir galvanized For securing the longitudinal beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. Transport or shipping beyond this is subject to additional costs, which can be individually requested from us depending on the place of delivery or delivery volume.

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion (Hovik) Type: P 90 Included in delivery: 01x Pallet rack beam, used Material color: white I-profile: 100 x 50 mm Bracket: 5 hooks Clear width: 950 mm Bwsdpfew R Shaox Al Aju 02x Locking pin, used Version: Sendzimir galvanized For securing the beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Any delivery or shipping of this item is subject to additional costs, which can be requested from us depending on the place of delivery and delivery scope.

Condition: good (used), Technical data for the base plate: Racking system: Stow Type: Pal Rack NS Included in delivery: Bjdpfxsxbn Hfe Al Aewu Base plates, new Material color: Sendzimir galvanized Type: PNABG0018 For frame profile: 100 mm Material thickness: 8.00 mm Overall width: 120 mm Overall depth: 144 mm Height: 76 mm Number of drill holes: 3 pcs. Drill hole Ø: 13 mm Weight per piece: 1.34 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for pick-up. Any additional transport or shipping of this item will incur extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Pull-out: 100% = 740 mm Bodpfx Aoww Im Hel Aowu Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.