Used Reis 3000/850/H2480 Mm for sale (76,836)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: grey, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), * New vehicle, not yet registered * Eligible for registration until 12/2029 * Special equipment: * Clutch-dependent but transmission-independent NMV MB 1.65 drive flange D=150 mm * and transmission-dependent auxiliary drive MB 131-2C * Pump positioned below the upper edge of the frame * Transmission lock NMV * Twin-plate clutch * Powertrain for 44-120 tons * Transmission oil cooler * Transfer case VG2800-3W/1.45-1.04 permanent * Power Shift 3, Advanced transmission * Offroad driving program * Rearview camera * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Side Guard Assist 2 * Front Guard Assist * ATS warranty according to general terms and conditions, 4 years / 340,000 km * Wheelbase 4850 mm * Frame overhang 2500 mm * Axle load, front axle: 9.0 tons * Exhaust muffler, vertical, behind the cab * Battery 220 Ah (AGM), batteries arranged side by side * Air reservoir, aluminum * Electrical pre-installation in the cab, 24V / 100 A * Suspension: front springs 9.0 tons, 4 leaves * Spring brake on 2nd front axle * Windshield tinted with band filter * Vehicle without rear underrun protection * Speed limiter * Transmission: 16-speed - Type: G 280-16 * Transmission lock, transmission-independent * Rear axle, bevel gear 300, 16.0 tons * Interior filter for construction vehicles * Fuel tank: 330 liters, aluminum, on the right side * Cooling capacity for hot climates * Air filter: cyclone air filter * Engine brake, reinforced * High Performance Engine Brake Hnsdpjzch I Tofx Af Hop * Auxiliary drive – smooth flange * Auxiliary drive, transmission-independent and clutch-dependent MB 1.65 * Configurable special module * Frame overhang 2500 mm * Smoker's package * Rain sensor * Tire pressure monitoring system * Rear warning device, acoustic and flashing warning light (external warning signal) * Additional key with remote control (2) * Fleet management system interface * Headlight protection grille * Exterior sun visor * Stabilizer on 2nd rear axle, reinforced * Steel wheels 11.75x22.5 (on front axle) * Additional 24V socket in the passenger footwell * Preparation for work lights, upper rear wall of the cab * Preparation for additional headlights * Seat belt warning device * Twin-plate clutch * Additional equipment: Emission standard EURO 6e * ABS can be switched off * Axle configuration: 8x8/4, permanent all-wheel drive * Approach/front mirrors, heated * Trailer coupling: drawbar coupling Ringfeder * Arocs 5 * Exhaust system, two-part, straight exhaust pipe, above 2nd axle * Braking system, electronic (EPB) with ABS * Cockpit multimedia * Differential lock, front axle * Compressed air connection in the cab * Compressed air unit with condensate monitoring * Automatic switching for dipped beam headlights (light sensor) * Cab: cab entrance, adjustable * Cab: tilting mechanism, hydraulic * Cab: M Low Roof, 2.30 m, tunnel 320 mm * Cab: spring-mounted, standard * Suspension: leaf spring / leaf spring * Suspension: rear springs, 2x15.0 tons * Electric windows * AdBlue tank: 25 liters * Manual lifting roof (steel) * Body/structure: chassis for tipper * Comfort locking system * Steering pump, unregulated * Multifunction steering wheel * Steering oil cooler * Air intake behind the cab * Air compressor 2-cylinder * Heated air dryer * Engine 12.8 liters - 375 kW R6 diesel (OM 471) * Engine variant OM 471 * Auxiliary drive MB 131-2c * Application: local transport * Wheelbase variant 4850 mm * Ramp mirrors * Waste heat utilization * Key w

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 7,084 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: Vw, fork length: 1,200 mm, rear tire type: superelastic tires (black), rear tire size: SE, overall weight: 4,900 kg, total height: 2,500 mm, total length: 2,300 mm, total width: 1,930 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: CE marking, adjustable boom, cabin, lighting, pallet forks, Very good condition. Hnjdpfx Afezhw Nps Hjp We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 4,452 h, load capacity: 3,000 kg, lifting height: 8,300 mm, free lift: 2,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,700 mm, fork length: 1,100 mm, rear tire type: superelastic tires (black), rear tire size: SE, overall weight: 6,400 kg, total height: 3,700 mm, total length: 2,000 mm, total width: 3,000 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: CE marking, adjustable boom, front guard, head guard, lighting, pallet forks, Combilift is in very good condition. We sell forklifts after a complete service. Hjdpfx Aszhw Ifof Hjnp Prepared for the end user. Ready for use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 7,084 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, motor manufacturer: Vw, gearing type: hydrostat, fork length: 1,200 mm, rear tire type: superelastic tires (black), rear tire size: SE, empty load weight: 4,900 kg, total height: 2,500 mm, total length: 2,300 mm, total width: 1,930 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: CE marking, adjustable boom, cabin, lighting, pallet forks, Very good condition. Hnjdpfjzhwt Ujx Af Hsp We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Hnjdpfxey T N H Ts Af Hjp

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg Hodpey D Ngzofx Af Henp

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Hjdpfx Asy Tbf Isf Henp Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm Hedpfx Afsid Al Ns Henp thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness Hedpfx Aowfc S Tjf Henp -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 4,452 h, load capacity: 3,000 kg, lifting height: 8,300 mm, free lift: 2,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,700 mm, fork length: 1,100 mm, rear tire type: superelastic tires (black), rear tire size: SE, overall weight: 6,400 kg, total height: 3,700 mm, total length: 2,000 mm, total width: 3,000 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: CE marking, adjustable boom, front guard, head guard, lighting, pallet forks, Combilift is in very good condition. Hnjdpfjzgwlbox Af Hjp We sell forklifts after a complete service. Prepared for the end user. Ready for use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 7,982 h, load capacity: 5,000 kg, lifting height: 4,850 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,520 mm, motor manufacturer: Perkins, fork length: 1,200 mm, tire condition: 70 %, overall weight: 8,400 kg, total height: 3,250 mm, total length: 4,100 mm, total width: 2,000 mm, maximum load weight: 5,000 kg, tire size: 8.25x15, fuel: diesel, Equipment: cabin, lighting, pallet forks, The Linde S50 is in very good condition. Hnjdpjzf I Epofx Af Hsp We sell forklifts that have undergone a complete service. Prepared for the end user. Ready for immediate use. We can arrange transport within Europe and worldwide.

Condition: used, machine/vehicle number: 9394, Year of manufacture: 2015 Technical Data: Main dimensions (length/height/width): 1430/1730/780 mm Discharge opening diameter: 102 mm Number of knives and blades: 3+1+9 Drive: 22 kW Hnjdpfx Afjyr Tlij Hep Total machine weight: approx. 400 kg Possible screen perforations: Ø 4–25 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 7,084 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: Vw, fork length: 1,200 mm, rear tire type: superelastic tires (black), rear tire size: SE, overall weight: 4,900 kg, total height: 2,500 mm, total length: 2,300 mm, total width: 1,930 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: CE marking, adjustable boom, cabin, lighting, pallet forks, Very good condition. Hnodpozdtwnjfx Af Hop We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: new, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 2000 mm • Height 200 mm • Weight 1700 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Hsdpfsymf R Hox Af Honp Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) • Plate thickness: 25mm Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, plate width 3000 mm plate depth 1000 mm plate height 600 mm weight 4200 kg GERD WOLFF clamping cube 3000 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 4200 kg Hnodpfx Afoymf H Ij Hep Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: used, plate width 3000 mm plate depth 5000 mm plate height 400 mm weight 20 t Hnodpjgrnfgsfx Af Hep dimensions of the machine ca. 5 x 3 x 0,5 m Table length 5000 mm Table width 3000 mm Table height 380 - 400 mm Machine weight approx. Approx. 20000 kg Space requirement approx. 5 x 3x 0.5 m

Condition: new, Year of construction: 2023, plate width 2500 mm plate depth 3000 mm plate height 300 mm weight / kg Clamping plates - T-slot plates - plate field 2500 x 3000 x 300 mm If you have not found the size you need, you can also send us an e-mail send us an e-mail with the filled PDF form. With this we can to produce an individual plate for you. Number of grooves: 10 Hnodpfxsyk Imfo Af Hsp edge distance: 66mm groove spacing: 22mm Casting quality HT250 Flatness less than 0,12 mm. Surface machined according to DIN 876/III

Condition: new, plate width 3000 mm plate depth 1500 mm plate height 300 mm Hnodoyk Ik Depfx Af Hjp weight 3580 kg dimensions of the machine ca. 3000 x 1500 x 300 mm GERD WOLFF clamping plate 3000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 3580 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: new, plate width 3000 mm plate depth 2000 mm plate height 300 mm weight 4600 kg GERD WOLFF clamping plate 3000 x 2000 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 6 Hnjdoyk Ikkepfx Af Hop Edge distance: 100 Weight: 4600 kg Casting quality HT250 Flatness less than 0.12 mm Surface treatment according to DIN 876 / III

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (reach him by phone at ...). HS Schoch Brush Rake / Root Rake / MS08 / 1,800 mm / HARDOX / In Stock & Immediately Available / NEW Price: €2,690.00 net / €3,201.10 gross - Cutting width (mm): 1,800 - Own weight (kg): 350 kg - Carrier vehicle operating weight (t): 6 - 10 MS08 coupler included. The brush rake is manufactured entirely from HARDOX. We have a large selection of various brush and root rakes in stock, available for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Upon request, we can also offer attractive financing options. Hedpfxsyhyngj Af Henp We are official sales and service partner for the following brands: - Westtech - Magni Telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete HS Schoch product range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 350 kg Please contact Marius Herden for more information.

Year of construction: 2008, condition: good (used), 2008 Philips Mammo Diagnost (re-badged Siemens Mammomat 3000) Mammography system for screening and diagnostics.First installed 03 2008 Analog Mammography system calibrated for CR with an 18x24 bucky, Anode: Mo Filters: Mo/Rh Grid table: Philips 18x24cm ,Philips 24x30cm Face shield: Standard 16cm, Long 21cm Carbon fibre table /mag table: 1,5 18x24 Siemens Carbon fibre table/ mag table 1,8 18x24 Philips Spot kompression plate 1,8 Philips Spot kompression plate 1,5 Siemens compression plate 1,5 Siemens compression plate 1,8 Philips Xbpcno7r Compression paddles: 18x24 cm high edge Philips Axillae paddle 21cm x 9cm , 28x27x9 cm Contact spot compression 8cm Magnification table x1.8 Hedpfxodqil Ae Af Hjnp This system is in very good cosmetic and functional condition. It has been professionally deinstalled and is available for immediate sale. carbon fibre table mag table plate

Condition: used, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: gas, color: blue, axle configuration: 4x4, fuel: liquid petroleum gas (LPG), gearing type: hydrostat, Year of construction: 2005, operating hours: 3,102 h, Equipment: all wheel drive, Iceresurfacer: + Dupon + OKAY 3000 + 4-cylinder VW gas engine, 75 HP + All-wheel drive + Hydrostatic drive + Snow tank + Water tank + Side broom + Rink board limiter Hnedpfoy Enw Uex Af Hep + Augers / blades + Year of manufacture: 2005 + 3,102 operating hours Municipal vehicle from first owner. Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typing mistakes possible, subject to prior sale!

Condition: used, mileage: 712,819 km, power: 309 kW (420.12 HP), first registration: 08/2008, fuel type: diesel, empty load weight: 9,175 kg, overall weight: 18,000 kg, axle configuration: 2 axles, color: brown, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, trailer coupling, Manufacturer: Scania - Type/Model: P420 - Outer shell: GRP (stainless steel inside) - 4 compartments (1956/1176/3000/3060) = 9,186 l tank capacity - Tank body: GRP INSULATED - First registration: 28/08/2008 - Mileage: 712,819 km - Number of axles: 2 - Emission class: Euro 5 - Cab: M - Transmission: manual gearbox - Suspension: leaf/air - Brakes: disc - Length: 8,010 mm - Width: 2,550 mm - Height: 3,030 mm - Unladen weight: 9,175 kg - Tank material: stainless steel - Total tank capacity: 9,186 l - Tank compartments: 4 - Insulated - System description: with outlets only Hnodpfxextuike Af Hjp

Condition: used, For inquiries about the attachment, Mr. Herden is available to assist you by phone. HS Schoch brush rake / root rake / MS01 / 1,200 mm / HARDOX / available immediately / NEW Hodpfx Afoyhym Aj Hsnp Price: €1,690.00 net / €2,011.10 gross - Working width (mm): 1,200 - Net weight (kg): 100 kg - Carrier vehicle operating weight (t): 1 - 3 MS01 coupler included. The brush rake is manufactured entirely from HARDOX. We have a very large selection of various brush and root rakes in stock and available for immediate delivery! Mr. Herden (Tel.) will be happy to assist you. Upon request, we are pleased to offer you financing options. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of HS Schoch products! Errors and prior sale excepted. = Additional information = New: Yes Application: Construction Unladen weight: 100 kg Contact Marius Herden for more information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). HS Schoch Brush Rake / Root Rake / MS03 / 1,400 mm / HARDOX / in stock & immediately available / NEW Price: €2,090.00 net / €2,487.10 gross - Cutting width (mm): 1,400 - Own weight (kg): 180 kg - Carrier vehicle service weight (t): 3 - 6 Including MS03 mount. The brush rake is manufactured entirely from HARDOX. We have a very large selection of different brush & root rakes in stock for immediate delivery! Hnedpfx Asyhym Nof Hsp Mr. Herden (phone ...) will be happy to assist you. Upon request, we are also happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete HS Schoch range for you! Errors and prior sale excepted! = More information = Condition: New Application: Construction Unladen weight: 180 kg Please contact Marius Herden for more information.