Used Rittal Sv9343.010 160A for sale (208)

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: Hnedpfx Ajh Eiw Ispnsl The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Hnodpfx Apoh Hnp Djnol Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Hnodepdqzxjpfx Apnol Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz Hnodpjcbtpkjfx Apnel weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Hnodpsx Srkljfx Apnsl Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: good (used), Switch cabinet with Keyence CV-5501P, CA-DC20E, CA-MP81, CA-D3R, CA-CN3 Rittal SK 3201.300 and Rexroth R911170402-102 and Murr Elektronik 54205 CV5501P, CADC20E, CAMP81, CAD3R, CACN3, SK3201.300, R911170402 102, switchbox, distribution box, distribution cabinet, distributor, cooler, cooling unit, imaging, camera, camera cable all other installed parts are included in delivery (see pictures) Overall dimensions (with Rittal cooler):Width: approx. 45 cmDepth: approx. 23 cmHeight: approx. 45 cm Overall dimensions (without Rittal cooler, only the cabinet itself):Width: approx. 30 cmDepth: approx. 23 cmHeight: approx. 40 cm Hjdpjk S Dazofx Apnonl Modules:Keyence CV-5501P digital image receiverKeyence CA-DC20E extension unitKeyence CA-MP81 monitor screenKeyence CA-D3R cable for LED illuminationKeyence CA-CN3 cable camera cableRittal SK 3201.300 thermoelectric cooler (100 Watt cooling capacity)Rexroth R911170402-102 Profibus moduleMurr Elektronik 54205 module interface the cover of the monitor is slightly curved, but should be easy to fix again (glue) You can find more switch cabinets - new and used - in our store! International shipping costs on request!

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Hodpewbuyzsfx Apnjnl

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 68178, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 250 mm / Rapid traverse in Z: 30 m/min - Standard closed workpiece automation via gantry loader and individual nest conveyor system Hnsdexwk Iwepfx Apnel Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Continuous power (100% duty cycle): 38 kW - Continuous torque (100% duty cycle): 300 Nm Tool Turret with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm - Torque capacity per driven station: 70–100 Nm Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Total dimensions: Length = 3,390 mm; Width = 2,850 mm; Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy workpiece loading/unloading - CNC control: Siemens 840D SL - High precision: Positioning accuracy in X and Z axes by Heidenhain linear scales - Main spindle (Weiss): High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Live tooling via Sauter turret: Extends machining capability to include drilling and milling - Cooling and paper filter unit: DGS System GMBH, 950L - Chip conveyor: DGS System GMBH - Hydraulic power unit: Rexroth, flow Q = 13 l/min, max. pressure = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation available: Yes Machine Condition: NOT WORKING - Loading/unloading sliding doors defective - Linear scale X axis (2 units) - Turret position sensor (furT30) - Spindle clamp/unclamp sensor - Emulsion solenoid valves (4 units)

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 66101, Technical Specifications: Work Area - Maximum diameter of the clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm Hnjdjxwk S Aspfx Apnol - X-axis travel: 626 mm / X-axis rapid traverse: 60 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Y-axis travel: +100/-90 mm / Y-axis rapid traverse: 30 m/min - Standard closed workpiece automation: Pick-up station from individual nests, conveyor system Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Power (continuous duty): 38 kW - Torque (continuous duty): 300 Nm Tool Holder with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm, Torque capacity: 70–100 Nm per driven station Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Overall dimensions: Length = 3,390 mm, Width = 2,850 mm, Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimized for efficient chip removal and straightforward loading/unloading - Control system: Siemens 840D SL - High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Integrated systems for part feeding and removal - Live tooling (Sauter turret): Enables drilling and milling operations - Cooling & paper filtration unit: DGS System GMBH, 950 L - Chip conveyor: DGS System GMBH - Hydraulic unit: Rexroth Q = 13 l/min, pmax = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation: Available Machine Condition: NOT WORKING - Pick-up pneumatic cylinder - Turret indexing motor - Door closing pneumatic piston - Door safety switch (Euchner) - Z-axis linear scale - Siemens power supply

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General specifications: ----- Drive motor power: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Hjdpjhga S Defx Apnsnl Weight: 2200 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 110 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included. Hjdpohga Scofx Apnsnl

Condition: used, machine/vehicle number: Prüfstand Antrieb, performance 110 KW tension 400 V speed 1,500 to 5,000 rpm adjustable motor with - frequency converter - incremental encoder, line choke, network filter - external fan emergency stop device manual control unit *frequency converter:* Hjdpjdfm Nrjfx Apnenl type: VCD 4 S 160A AZ/NS serial number: BKQ4S160AN20A-1 output: 207 KVA motor performance up to 160 KW total weight approx. 1,000 kg

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs Hnsdewtctyspfx Apnel total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Year of construction: 2022, condition: new, grinding diameter:260 mm grinding length:1000 mm centre height:130 mm dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Hnjdpfxsg N Nh Do Apnel Payment: 100% before loading of the machine Warranty: no

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 570 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-travel: 1,000 / 600 mm Y-travel: 570 mm Z-travel: 570 mm Control: Fagor 8055 MC Spindle Speed: max. 10,000 rpm Spindle mount: SK40 Feed and rapid traverse Feed speed X/Y/Z: continuously variable: 10 m/min Rapid traverse X/Y/Z: 24 m/min Table Table size: 1,200 x 500 mm Table load: max. 800 kg Distance spindle nose to table: min.: 100 mm, max.: 670 mm Tool magazine Number of tool positions: 24 Tool mount: SK40 MACHINE DETAILS Machine weight: approx. 5.0 t Dimensions (L x W x H): approx. 3,300 x 2,300 x 2,800 mm Total power requirement: 15 kW Hodpfx Aswlpa Repnenl Interface: 232 Operating hours (switch-on hours): not visible Functional description: runs smoothly, fully functional, quiet spindle noise from 3,000 rpm EQUIPMENT - Cooling system with spindle feed (no internal cooling) - Control panel with handheld control unit - Chip conveyor - Electrical cabinet with cooling Rittal SK 3305500

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, serviced thoroughly after complete service in 02/2026, inspected and ready for operation. Maximator JET certificate available. Availability: in 4 weeks Year of manufacture cutting table: 2019 Operating hours cutting table: 5,900 hrs • Effective cutting area: 2,000 mm (gantry) x 1,000 mm • Z-axis CNC vertical clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control NUM • Rittal electrical cabinet on wheels • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software SmartCut powered by IGEMS; subscription-based • Handheld operator device • Laser for position detection • Cutting valve MJ 100 • Abrasive head aJET 3D • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container 1,200 kg with automatic pressure feed system • High-pressure piping on the axes up to the cutting head Hedpjxvqvfsfx Apnsnl • Safety system with light barriers • Water tank with heavy-duty support slats • Reference edge on X and Y • Machine feet with precision wedge shoes • 1-year or 1,200 operating hours warranty • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 hrs, retrofit in 10/2025 with warranty, new pulsation damper with TÜV certification Technical data and prices subject to change and errors excepted. Sale subject to prior sale.

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hedpjx Iwfmjfx Apnonl Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock: approx. 29 linear meters – Price is per meter! Type BD2C-3-400-SB3 / 400 Amps – 5-pole – L1 L2 L3 N PE – copper – no aluminum conductors! Rated voltage Ui max. 690V, frequency 50 – 60 Hz Busbar lengths: 17x 3.25m, 1x 2.25m, 5x 1.25m Price per meter includes connectors, end caps, and mounting brackets Feed-in and distribution boxes in 16-32-63-125-250A are available as options Dismantling was carried out by a certified electrician. Busbars are in excellent condition!!!! Please inquire for your required lengths or accessories! In stock, available immediately!!! Hnodpfx Apow Etm Ionjl Attention: 100A, 160A, 250A, and 400A busbars are also available – please inquire!!! ----- Old Klöckner Moeller BD1 system still available! Busbars, elbow sections, feeders, and distribution boxes for the old Klöckner Moeller BD1 / BD 1 system in stock!!! Are you also looking for a crane system?

Condition: new, Power 15 KW Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 ber of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238 Hnedovwfhcopfx Apnel

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 106000809860, battery voltage: 24 V, No minimum price – guaranteed sale to the highest bidder! Hnsdpfx Aoyk Eutjpnol MACHINE DETAILS Voltage: 24 V Input current: 5.6 A Output current: 150 A Frequency: 50 Hz FEATURES REMA 160A battery connector 16A plug All dimensions are approximate. No liability is assumed for typing or measuring errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY with payment confirmation by email! Collection WITHOUT prior notice Monday to Friday, 7:00 a.m. to 4:30 p.m. If the mast is too high for transport, it can be dismantled upon request. If the machine is not collected within the agreed time, a storage fee of €20 per machine per day will be charged (the outstanding payment must be settled before collection).

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: S6AW11S1, turning diameter over cross slide: 540 mm, turning length: 550 mm, turning diameter: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and driven tools at all positions TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Bar capacity: 65 mm Spindle speed: 0 - 5,000 rpm Spindle torque: max. 250 Nm Distance from spindle to sub-spindle: 1,050 mm Sub-spindle: A2-6, travel: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse in X/Y/Z axis: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm MACHINE DETAILS Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight: approx. 5.7 t Machine dimensions LxWxH: 2.2 x 3.4 x 2.4 m Transport dimensions of machine: approx. 3.3 x 1.9 x 2.2 m Electric configuration - voltage/frequency: 3 x 400 V / 50-60 Hz Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) Hodpfxsw T Sq Te Apnsnl EQUIPMENT - Control cabinet equipped with Rittal cooler - Hinged belt chip conveyor - Chip tray - Compressed air gun - No chuck included in the sale

Condition: repair required (used), Year of construction: 2011, operating hours: 8,545 h, functionality: not functional, turning length: 310 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 370 mm, mount diameter: 30 mm, Condition: Non-functional. The machine has an unknown malfunction in the turret, making referencing and axis movement impossible. The machine requires repair! TECHNICAL DETAILS Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Distance between centers: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Control: Heidenhain CNC Pilot 4290 Spindle speed: 6,000 rpm Spindle bore: 73 mm Bar capacity: 50 mm Main spindle torque: 95 Nm at 100% and 127 Nm at 40% Tool turret - number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min MACHINE DETAILS Total power requirement: 20 kVA Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m Hnsdpow T Srdefx Apnjl Operating hours (on-time): 36,443 h Spindle hours: 8,545 h Interface: yes EQUIPMENT - 160 mm 3-jaw chuck with matching flange - 2 sets of spare jaws - 12-station turret with driven tooling - Sauter disc turret (C-axis = 300 rpm) - Chip conveyor 450 K-1/250; year of manufacture 2000 - Manual chuck fitted – no hydraulic chuck - Electrical cabinet with Rittal cooling

Condition: good (used), Year of construction: 2021, machine/vehicle number: 22112P114, Offer 24107 Technical data: Hjdpotyli Njfx Apnenl - Pump station unused in mint condition - Pump make DELIMON type FZ-B 3.75 ccm/m. - Flow rate 7.6 cm³/min - Pressure capacity up to 200 bar - Lubrication unit fill level - thermostat - fan - 400 V electrical connection - installed in RITTAL switch cabinet with hinged lid and two hinged doors - Space requirement approx. W 1100 x H 1100 x D 500 mm - Weight approx. 100 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW1000A, Complete Klöckner Möller - Siemens BD2 - 1000A Busbar System available! Stock: 34 running meters - Price is per meter! Type BD2C-3-1000-SB3 / 1000 Amps - 5-pole - L1 L2 L3 N PE - copper conductors only, no aluminum! Voltage Ui max. 690V, frequency 50 - 60 Hz. Busbar length: 10 x 3.25m, 1 x 2.25m. Price per meter includes connectors, end caps, and brackets. Feeder and tap-off boxes 16-32-63-125-250A are optionally available. Disassembly was carried out by a qualified electrician. Busbars are in top condition! Please inquire about your required lengths or accessories! Stock item, immediately available! Note: 100A, 160A, 250A, and 400A busbars also in stock – please inquire! ----- Old Klöckner Moeller BD1 system still available! Busbars, corner pieces, feeder units, and tap-off boxes for the old Klöckner Moeller BD1 / BD 1 system in stock! Hnjdjw Etmbspfx Apnsl Are you also looking for a crane system?

Condition: used, Year of construction: 2009, functionality: fully functional, Offered is a turning and milling machine EMAG VLC 800 MT with tool changer. The machine has a turret with 12 tool positions (VDI 50) and a milling spindle with tool changer for up to 96 tools. The tool magazine can be loaded during processing, which reduces setup time and allows the use of sister tools. The proven EMAG turret is available for turning operations on the machine. On the multifunctional VLC 800 MT production center, workpieces up to 800 mm in diameter can be completely processed in a single clamping. The following components will be sold with the machine: - Pick-up station - Extraction unit (IFM) - Coolant system with belt filter - Chip conveyor CONTROL Siemens 840D MACHINE CONNECTION Mains voltage: 400V AC 50 Hz Hnedpfx Aow Au U Ujpnol Connected load: 92kW Rated current: 143A Max. backup fuse: 160A The machine is sold on an “as seen” basis, without any warranty claims. The machine will be available from November 2025, machine is in production until Oktober. The machine can be completely overhauled on request. Please do not hesitate to contact us fot further information.