Used Robot Tool Changing System for sale (72,990)

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Tool-temp TT-137 Tool Tempering Unit, 2018, heating: 12 kW, temperature: 140°C Stock: 3 units Kedpfx Aqezab S Heisdt

Condition: used, table length 2400 mm table width 1200 mm Kedpfx Aszh N Udoqisdt table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: used, UHV deposition system (ebeam sputter) UHV deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit is removed Cryopump and prepump is removed Loadlock: for samples round 75mm Incl. sample heater 450l/s turbomolecular pump (Leybold) Proceschamber: Size: Width 680mm x Height 750mm x Depth 590mm Incl. shielding Double oring door (partially pumped) Heaters Basepressure low 10-7mbar, high 10-8mbar Electronics: Baseline cabinet (e-beam unit removed) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Kodpfxeuhcn Ns Aqijdt Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 55.000,-

Condition: used, Leybold A700 Q deposition system (ebeam) Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Kjdpfx Aqouhcnisiodt Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 37.500,-

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Year of production: 2014 Lifting capacity: 20kg Kdsdpfx Aqer Aka Asiet Reach: 1726mm

Condition: excellent (used), Year of construction: 2020, operating hours: 28,257 h, machine/vehicle number: 52011345674582, load capacity: 350 kg, overall weight: 7,490 kg, fuel type: diesel, product width (max.): 2,520 mm, working height: 30,000 mm, enginetype: Diesel, manufacturer: SYSTEM LIFT Kdedpfxozqcaxo Aqist

Condition: used, functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, Roller Conveyor Curve / 90-Degree Curve Manufacturer: Soco System Condition: Used Model: Roller Type: 90° Total outside width: approx. 1430 mm Total inside width: approx. 820 mm Total width incl. motor: approx. 580 mm Conveying width: approx. 410 mm Kodsygyhaopfx Aqisdt Roller pitch: approx. 60 mm Axle spacing: approx. 110 mm Roller type: Plastic Material: Steel/Plastic Color: Galvanized, Light Grey, Orange Includes 2 Soco 0.12 kW motors Stock quantity: 4 units Price per unit The conveyor system was fully operational until disassembly. Condition: Fully functional, with signs of use Ideal for fast material handling Internal item number: 2026020302 Pickup address: Industriestraße 5 (47918 Tönisvorst) Professionally dismantled and packaged Thanks to the excellent workmanship of the conveyor system, your materials will glide smoothly to their destination—even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading your goods, we are your experienced partner! We are happy to provide you with a customized quote or advise you regarding concepts or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our extensive network of specialists. We have already successfully completed projects for companies in various sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will work to optimize your operations and material flow efficiently and sustainably. We can also offer fully automated sorting technology and additional components such as picking shelves or containers.

Condition: used, Year of construction: 2016, functionality: fully functional, conveyor belt length: 1,000 mm, conveyor belt width: 670 mm, total length: 1,000 mm, total width: 820 mm, total height: 800 mm, power: 0.12 kW (0.16 HP), motor manufacturer: Soco System, Belt Conveyor/ Conveyor Belt/ Belt Conveyor System Manufacturer: Soco System Condition: Used Year of Manufacture: 2016 Overall Length: approx. 1000 mm Kodjw A S Swopfx Aqijdt Overall Width: approx. 820 mm Overall Width without Motor: approx. 670 mm Conveyor Width: approx. 580 mm Conveyor Height: approx. 800 mm (adjustable) Material: Steel/Aluminium - galvanized Belt Type: Plastic - smooth Color: galvanized, dark blue Including Soco motor (0.12 kW) Including feet (height-adjustable) The conveyor system was operational until disassembly. Thanks to the superior workmanship of the conveyor technology, your material glides smoothly to its destination even under heavy loads. Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to prepare a customized offer for you or provide advice regarding design or installation questions. Simply let us know your requirements and site conditions. Benefit from our many years of experience and excellent network of professionals. We have already successfully implemented projects for companies in various sectors such as logistics, pharmaceutical industry, trades, and the electronics industry. Together, we will find ways to optimize your process and material flow cost-effectively and sustainably. We can also offer you fully automatic sorting systems or complementary components such as order picking racks or containers. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst)

Condition: excellent (used), Year of construction: 2007, Type: Industrial robot Brand: Hyundai / Hanwha TechM Kjdpfxer Iy Nke Aqiodt Year of production: 2007 Maximum load: 200kg

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Kdodpfx Aqsyzc Rujiot

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Kdodpfx Aqezqbmdjiot Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: good (used), Year of construction: 2001, Quickwood Rustication / Brushing Line on 03 sides with 02 brushes per side Ksdpfxevy Eu Io Aqisdt

Condition: used, diameter div. Kodpfjww Nb Eox Aqiodt number 36x tool adaptor BT 40

Condition: used, diameter div. number 40x tool adaptor BT 40 Kdedoww Nbxopfx Aqist

Condition: used, diameter div. Kodpfxeww Nbfs Aqijdt number 40x tool adaptor BT 40

Condition: used, diameter div. number 56x tool adaptor BT 40 Kdodpfxewtrzyo Aqist

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS SK 50 Kedjwtrztopfx Aqijdt Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: used, Magnetic conveyor belt, magnetic sliding conveyor, DGS System GmbH Z-conveyor, sliding belt system, conveyor belt, magnetic belt conveyor Type No.: MBF 326P31.75 Item No.: 44489-10 Year of manufacture: 2017 Belt width 300 mm Ksdpoi Huzxofx Aqisdt Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to the modular frame) Insertion length approx. 3900 mm (without the modular frame) Insertion height 210 mm Insertion width housing 370 mm Insertion width threaded inserts for adjustable feet 410 mm Insertion width at the modular frame 470 mm Conveying height – discharge height approx. 1040 mm Conveying speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 volts, 50 Hz - Continuous chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: new, Year of construction: 2026, For sale: the extremely robust pneumatic post drivers from Rhino Tool, USA. Previously sold on the European markets as RAKL, particularly in Germany. This indestructible machine is available in 4 models: PD55 25 kg PD110 50 kg PD140 63 kg PD200-5" 77 kg PD200-7" 80 kg Kodsw R U Ehopfx Aqisdt All options such as special adapters/inserts, pneumatic centres, and grippers are available from stock.

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Ksdpfxjxni Iqe Aqiedt Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Ksdpfxexnizde Aqiodt Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), 8-position tool turret, manually indexable, for retrofitting Ksdpfswg Rv Nex Aqijdt 8 x turning tool holders 8 x drilling tool holders Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Year of construction: 2025, condition: new, functionality: fully functional, Type: TT-108’000 Year: 2025 Operating hours: 0 h (Machine is brand new) For sale due to an incorrect purchase. Ready for immediate delivery. Kjdezhpdlspfx Aqisdt

Year of construction: 1990, condition: ready for operation (used), Boxtaper top/bottom machine has a infeedbelt Mobile as-is or Kodpfxjfxxn Hj Aqisdt adjusted to customer needs

Condition: used, Manufacturer: TOOL TEMP Ksdpoylaatefx Aqisdt