Used Rofin Starweld 90 for sale (10,983)

Condition: used, Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower Dkjdpfx Akscn Rd Nsiep -Clamping block: for workpiece clamping -Width: 90 mm -Length: 700 mm -Height: 150 mm -Threaded holes: M24 -Bores diameter: 25 mm countersunk -Number: 1x milling support available -Price: per piece -Weight: 70 kg/piece

Condition: used, Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 90 mm shaft -made of: gunmetal -Number: 2x bearings available -Price: per piece -Dimensions: 130/130/H160 mm Dkedpjcgdr Refx Akisp -Weight: 4.7 kg/piece

Condition: used, Electric motor, three-phase motor Djdpfed Sx Ngsx Akiokp -Power: 0.35/0.5 kW -Speed: 660/1325 rpm -Shaft: Ø 24 x 50 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 330/199/H230 mm -Weight: 10.3 kg

Condition: used, Bezel, stick, lynette Dsdpjb A Td Sefx Akiskp -Max. Passage: Ø 90 mm -Tip height: 100 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 280/280/H110 mm -Weight: 8 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available Dkedpfjdki N Ssx Akijp -Dimensions: 430/172/H225 mm -Weight: 19 kg

Condition: used, Electric motor, three-phase motor, brake motor -Manufacturer: Lenze, electric motor with brake -Type: D 90 L4-BR -Power: 1.5 kW -Speed: 1420 rpm -Brake: 16 Nm -Shaft: Ø 24 x 45 mm -Construction: B3 -Dimensions: 380/245/H180 mm Djdpfxogcvnto Akiokp -Weight: 21 kg

Condition: used, Gear motor, electric motor, three-phase motor Dkjdpec U Tybsfx Akisp -Speed: 90 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Dimensions: 305/195/H150 mm -Weight: 10.8 kg

Condition: used, Gear motor, electric motor, three-phase motor Dkodpfxsc U I Eus Akiop -Speed: 90 rpm -Power: 0.25 kW -Construction: B3 -Diameter hollow shaft: Ø 16 mm -Protection class: IP 55 -Dimensions: 315/195/H145 mm -Weight: 11.6 kg

Condition: used, Electric motor, three-phase motor -Power: 1.4 kW -Speed: 720/1440 rpm Dodpfxed Nn Ihs Akiokp -Shaft: Ø 24 mm -Construction: B3 -Dimensions: 345/240/H180 mm -Weight: 24.2 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 50 mm -Piston rod: Ø 25 mm -Diameter eyes: 25/30 mm -Stroke: 90 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 62/62/H330 mm -Weight: 5.1 kg Dodpfxjgwrdvo Akiskp

Condition: used, Gear motor, electric motor, electric gear motor Dkodpfx Asci N Hrskisp -Speed: 45/90 rpm -Power: 0.35/0.5 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 20.4 kg

Condition: excellent (used), Year of construction: 2005, Leg length – long leg: 1000 mm Leg length – short leg: 660 mm Leg width: 120 mm Accuracy, accurate on all four sides: 0.001 mm Weight, approx.: 135 kg Dkedpfxjzki Rqs Akijp

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Dkjdpfx Akswkkpqjisp Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Year of construction: 2009, operating hours: 3,093 h, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, overall weight: 8,900 kg, total width: 3,400 mm, total height: 3,160 mm, product length (max.): 5,800 mm, spindle speed (max.): 1,600 rpm, table load: 2,500 kg, number of axes: 5, This 5-axis MSC Chemnitz BFT90/5 MSC boring machine was manufactured in 2009. It features a substantial table size of 1000 x 1120 mm with a maximum table load of 2.5 t. The machine offers impressive feed rates of 4000 mm/min and a spindle speed range of 4 – 1600 rpm. If you are looking to get high-quality boring capabilities, consider the MSC Chemnitz BFT90/5 MSC machine we have for sale. Contact us for further details. • Table size: 1000 x 1120 mm • B axis (table rotation): 360° • Feed rate (X/Y/Z): 4000 mm/min • Spindle diameter: 90 mm • W axis travel: 710 mm • Control cabinet dimensions (L x W x H): 2.0 x 0.75 x 2.0 m • Temperature range: 15–40 °C • Electrical: 3-phase/50 Hz; 380 V rated voltage; 24 V control voltage • Connected load: 40 kW • Fuse rated current: 100 A • Typical power consumption: approx. 7.5 kW • Spindle running time: 3069 h • Power-on hours: 10402 h • General overhaul: 2009 General Information Retrofit Retrofit includes: • Control system: TNC 320 • New drives in all axes • New table • New clamping system • New media units Dedpfsy Hvgtjx Akiekp • New hand control unit • New coolant system • New hydraulic unit • 30 measuring scales (linear measurement systems) • Control manufacturer: SK 40 • CNC control: TNC 320 • Complete electrical retrofit • New wiring throughout the machine • Integration of CNC system (TNC 320) • New inputs and outputs (I/O) • New sensors and measuring systems • Updated control circuits and safety circuits • Modern CNC control system • Improved accuracy due to new measuring systems • Higher reliability • Better performance due to new drives • Reduced downtime due to new auxiliary units • New electrical documentation • Updated schematics • Includes systems for power supply, control, machine interface, operator panel, and drivesMachine base remains:MSC Chemnitz table boring machineType: BFT 90/5 MSC – 5 axes Technical Specification Taper Size SK 40

Condition: new, Brinkmann TH 90/540+001 pump, serial number: 1204014976-76844 001, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dksdjzhqtuspfx Akijp

Year of construction: 2011, condition: excellent (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 90X33 Typ: SJ90X33 A6 Application: PE PIPES or PP PIPES Screw diameter: 90 Drive: 160 KW Dedpfx Aksifgwlsijkp Output capacity PE: approx. 400 - 450 kg/h Condition: Good, ready to use The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, Hot platen press Brand: OMC Type: PL 90s New machine Technical data Djdpjyalmbofx Akiokp Plate size: 3000 x 1300 mm Stroke: 400 mm Stroke type: Upward stroke (from bottom to top) Plate type: Elkom electronic plates Press force: 90 tons on 80% of the surface Press cylinder: 6 x Ø 70 mm Specific pressure: 2.05 kg/cm² on 100% of the surface, 2.56 kg/cm² on 80% of the surface Loading and unloading side: 3000 mm Heating system: Electronic 25.4 kW, maximum temperature of 120°C Automatic opening with timer Control panel: Standard Connection: 400 V, 50 Hz, 3 ph Safety device: Safety cable around the entire press Emergency button Two-hand operation CE standard Press structure The press structure is made of composite and welded steel. The structure of both the fixed and moving platen is made of composite and welded steel. The press is equipped with a rack and pinion guide system to ensure perfect parallel movement during the closing/opening of the plates. Elkom heating plate Elkom electric plates with electric resistors The plates consist of a chipboard on which an aluminum sheet with the electric resistors is mounted. Maximum working temperature 120°C. Maximum thrust = 7 kg/cm² Hydraulic system - The hydraulic system consists of a two-stage unit with submersible pump to reduce noise and lubricate the rotating parts. - Pump for fast closing/opening (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). - 2 HP electric motor - The hydraulic unit is equipped with the following control/safety valves installed on the tank: - Maximum pressure valve: prevents excessive pressure in the hydraulic system in the event of an electrical or electronic control fault - Pressure retention valve (check valve) - Valve for low drain pressure (pre-drain valve). It prevents dangerous shocks within the system. - Oil drain magnetic valve Control panel and electrical system The pressing parameters can be set on the control panel, which is equipped with the following switches/meters: - 2 temperature regulators for setting the plate temperature - Pressure gauge for pressure regulation with automatic pressure equalization system - General on/off switch - Two manual safety buttons for closing the press - Timer for automatic opening - Switch to select manual or automatic opening of the platens after the work cycle . - Off/on switch for upper and lower platen resistance Safety systems - Timed bimanual control for closing the press - Safety rope on the four sides of the press - Platen lock for maintenance - Protective guards for the pinion and rack units - Safety stickers and warning notices - Operating and maintenance manual - The press complies with CE standards Optional: Touchscreen display - Programmable logic controller 7-inch color touchscreen display specially developed for setting the following parameters - temperatures - pressing time - Daily setting of the heating system - automatic switch-off of the heating system when the set temperature is reached and automatic temperature recovery - new system for automatic pressure setting - Possibility to save historical data/parameters - Diagnostic system Sensor for checking the plate parallel stroke Anodized (anodized) surface on the 2 plates Electrical exclusion of 2 cylinders + sensors for parallel control Mylar film on panels Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top)

Condition: good (used), Year of construction: 1981, Tuschierpresse Machine type: Tuschierpresse Reis TUS 90 Year: 1981 Equipment Schließkraft: 1.000 kN Motor: 380 V Max. Belastungen: Dksdpfx Aozkbtkokiop untere Aufspannplatte: 7.000 kg obere Abschwenkplatte: 3.500 kg

Condition: new, functionality: fully functional, power: 196 kW (266.49 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires Dodpfx Aezi Uyzskijkp • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Vötsch VC³ 0034 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Machine Type: Climate Test Chamber / Climate Chamber Test Chamber Volume: approx. 335 liters For sale is a used climate test chamber from Vötsch for temperature and climate testing in laboratories, research, development, and quality assurance. Technical Data Test Chamber Dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing Dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Temperature Range: -10 °C to +90 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +89.5 °C Temperature Homogeneity: ±0.5 to ±1 K Temperature Deviation: ±0.1 to ±0.5 K Heating Rate: approx. 1 K/min Cooling Rate: approx. 0.3 K/min Max. Heat Compensation: approx. 200 W Refrigerant: R404A Filling Quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power Connection: 230 V / 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Protection Class: IP54 Weight: approx. 490 kg Equipment Dkodpfezgb Awox Akisp SIMPAC control system Temperature and humidity control Stainless steel test chamber Ethernet, USB, RS232, RS485/422 Test item protection function Cable glands Application Areas Climate testing Temperature testing Material testing Electronics testing Quality assurance Research and development Scope of Supply Vötsch VC³ 0034 Climate Test Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures For the safety of our customers, the offered climate chambers are tested before delivery, if necessary, filled with legally compliant refrigerant, subjected to a leak test, and delivered with a documented test run. Subject to change and errors in technical data as well as prior sale.

Condition: used, Anvil with round and pointed horn Anvil, North German design Track width: 140 mm Track length: 440 mm (with pointed horn) Horn length, round horn: approx. 200 mm Horn length, pointed horn: approx. 200 mm Overall length: 630 mm Height: 285 mm Foot: 290 x 210 mm - Steel casting, hardened - Square hole approx. 28 mm for anvil tools - Round hole, approx. 28 mm diameter Dimensions (L x W x H): 630 x 290 x 285 mm Dedpfxezinw Hs Akiskp Anvil weight: 95 kg Good condition, very bright tone, good quality.

Condition: excellent (used), Year of construction: 2003, operating hours: 1,755 h, functionality: fully functional, machine/vehicle number: 090DM00448/01, fuel type: diesel, Dulevo 90 DM Dedpjzkkytjfx Akiekp

Condition: good (used), Working range: 1.9 - 100 mm Spindle speeds, infinitely adjustable in 2 groups: 95 - 3500 rpm Drive motor, gear motor: 380 V, approx. 0.55 kW Working height: 1000 mm Dsdpfx Akszibvioiskp Space requirement: 1150 x 800 x 1250 mm Weight approx.: 260 kg

Condition: used, power: 7.5 kW (10.20 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Dksdpjzixdwjfx Akiop Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Dedpfjynpc Njx Akiekp Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025