Used Sas Raz-Dv 1250/4 for sale (59,615)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Lsdod Tbbdspfx Adterk

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) Lrjdpfjfdkb Tex Adtjk - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Lrsdpfx Adod Tqaletsk Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. Lrjdpfx Adjfdkb Uotok We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Lsdpfoguk A Hox Adtsrk Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Ledpfoguk Dksx Adtork The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Lredpfx Aofdkbhodtsk Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Lrjdpeguk Dvefx Adtek Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 376,000 km, power: 331 kW (450.03 HP), first registration: 05/2007, fuel type: diesel, overall weight: 23,500 kg, axle configuration: 3 axles, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Manufacturer Iveco Model Stralis AS440S45TX 6x2 Euro 5 Year 2007 Condition Good Lsdpsyv Ubnefx Adtsrk Serial Number WJMS2NTH404324589 Ref. nr. 988103 Reg. date: 25-05-2007 Hk: 450 Km: 376000 Gearbox: Manual Eurotype: 5 Diesel tank: 1 Tank liter: 400 L Air conditioning: ? Number of beds: 2 Coffee machine: ? Radio: ? Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22.5 - 315/80R22.5 Cover% left 40% 20% 30% Front suspension: Springs Suspension rear: Air Stool Displaceable: ? Wheelbase: 3800 mm Total weight: 23500 Kg Net weight: 8000 Kg Load capacity 15500 Kg

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,960 h, load capacity: 3,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,140 mm, power: 85 kW (115.57 HP), fork length: 1,200 mm, empty load weight: 6,640 kg, total length: 4,780 mm, drive type: Diesel, construction width: 2,060 mm, Rigid telehandler Load center: 500 mm Mast type: telescopic Transmission: torque converter with M-Varioshift Speed class: 20 km/h Condition: operational and fully functional Technical condition: normal Front tires type: pneumatic Front tires size: 405/70 R20 Front tires condition: 60 - 80% Rear tires type: pneumatic Ljdpoytytpefx Adtork Rear tires size: 405/70 R20 Rear tires condition: 60 - 80% 3rd hydraulic valve, rear work light, front work light, heater, full cab, air conditioning, CE certificate, external mirrors, optional with bucket

Condition: used, maximum load weight: 27,193 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 05/2026, loading space length: 13,315 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2024, Equipment: ABS, SCHMITZ Cargobull Type SKO 24/L – 13.4 FP COOL V7, 3-axle deep-freeze box semi-trailer ('flower width') with double-deck loading system and 22 height-adjustable aluminum load beams; 1 row of lashing rails (hole strip design) integrated into the side walls; partition wall prepared; International customs seal for body with rear door, with customs acceptance; Internal loading dimensions: 13,315 x 2,490 x 2,650 mm; SCHMITZ Cargobull type TKM refrigeration unit (diesel and electric operation) with start/stop automatic function; Trailer Connect temperature recorder with printer; TrailerConnect service package Module 3: 'Info, Alert and Control'; TrailerConnect 'EXECUTIVE' package; foldable internal air circulation front wall, approx. 1,890 mm high; kick strip approx. 300 mm high; floor in aluminum checker plate, low noise; ROTOS - SCB axles, 3x 9,000 kg air suspension with lift and lower function; lift axle, including start-assist, activated by '3x brake press'; ABS, disc brakes with EBS; tires 385/65 R 22.5; one horizontal and two vertical rear rubber bumpers on lamp panel; Dynamic Ramp Protection (DRP 3.0), compressible corner dock buffers with stainless steel rollers; full-height rear rubber door protectors; basket-type spare wheel carrier for 2 spare wheels at rear frame; large pallet box for 36 Euro-pallets; technical gross weight: 39,000 kg; FRC valid until 04/2030; 1st owner; Very good overall condition! German vehicle with German documents! Sale to commercial customers only! All information provided without guarantee. Subject to error and prior sale. Lodpfx Ajywc Eqjdterk

Condition: used, maximum load weight: 27,193 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 05/2026, loading space length: 13,315 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2024, Equipment: ABS, SCHMITZ-Cargobull Type SKO 24/L – 13.4 FP COOL V7 3-axle refrigerated box semi-trailer (“flower width”) with double-deck loading system and 22 height-adjustable aluminum support bars, 1 row of load securing rail (slot-hole strip) recessed into the side walls, partition wall prepared, international customs lock for body with rear wall door, customs lock certificate included, internal cargo dimensions approx. 13,315 x 2,490 x 2,650 mm, SCHMITZ-Cargobull Type TKM refrigeration unit (diesel and electric operation) with start/stop automatic, Trailer Connect temperature recorder with printer, TrailerConnect Service Package Module 3: “Info, Alert and Control”, TrailerConnect “EXECUTIVE” package, folding internal air circulation bulkhead approx. 1,890 mm high, scuff plate approx. 300 mm high, floor made of aluminum checker plate, low noise, ROTOS - SCB axles 3x 9,000 kg air-suspended with lift and lowering facility, lift axle with start-off aid, “3x brake” operation, ABS, disc brakes with EBS, tires 385/65 R 22.5, 1 rubber bump strip at the rear and 2 vertical rubber bump stops on the lamp carrier, Dynamic Ramp Protection DRP 3.0, compressible corner roller bump stops with stainless steel rollers, full-height rubber door protection strips at rear, spare wheel carrier in basket design for 2 spare wheels at the rear of the frame, large pallet storage box for 36 Euro pallets, technical gross weight 39,000 kg, FRC valid until 04/2030, single owner, very good overall condition! German vehicle with German documents! Sale to business customers only! All details without guarantee! Subject to errors and prior sale! Lrjdpfx Aoygbwpsdtsk

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 6 mm length 450 mm 40 pieces in a package 6 packages available Lrjdpshhyitsfx Adtok 95 Euro per package

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 3,25 mm length 350 mm 120 pieces in package 2 packages available Lrjdpfx Aohhyizodtjk 95 Euro per package

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, table length: 2,100 mm, table width: 1,100 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, CNC Gantry Milling Machine Gualdoni GDV-400 – Year 2018 – Fully Functional – Turin (TO) Gualdoni GDV-400 CNC gantry milling machine, year 2018, in good condition and fully operational. Fixed gantry structure with longitudinal moving table, ideal for machining large workpieces. Available for inspection and testing by appointment in Turin. Main technical data: - X-axis travel (longitudinal): 2,000 mm - Y-axis travel (cross): 1,100 mm - Z-axis travel (vertical): 900 mm Lredpfjy A Tuysx Adtek - Table dimensions: 1,100 × 2,100 mm - Installed power: approx. 45 kW - Spindle speed: 100 – 10,000 rpm (stepless adjustment) - Tool holder interface: ISO 40 (DIN 69871) - Rapid traverse X/Y/Z: 20,000 / 20,000 / 20,000 mm/min - Feed rates: 10 – 5,000 mm/min - ATC tool magazine: 24 positions – 4 sec tool change - Max tool diameter: 106 mm | Max length: 300 mm - CNC control: FAGOR (ISO + conversational) - 3 controlled axes: X – Y – Z - Machine footprint: 7,500 × 3,000 × h 3,800 mm - CE compliant | Year: 2018

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 810T, total height: 2,900 mm, number of axes: 3, This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Lrodpfx Adox D Hk Ijtok Dimensions Machine Depth 4400 mm

Condition: good (used), Year of construction: 1995, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump Ledpfx Ajvbyy Uodtjrk -Manufacturer: Becker, pressure/vacuum pump type DVT 2.140 -Drive: AEG 5.5 kW / 1440 rpm -Volume flow rate: 140 m³/h -Suction pressure: -500 mbar -Final compression pressure: 500 mbar -Dimensions: 980/380/H520 mm -Weight: 146 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. Lrodpfxoupvrxo Adtek The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Year of manufacture: 2008 Cutting range round: 400 mm Cutting range square: 400x400 mm Material feed (automatic): 600 mm Multiple material feed: 99,999 mm Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: used, mileage: 461,575 km, power: 251 kW (341.26 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 12,560 kg, maximum load weight: 13,440 kg, overall weight: 26,000 kg, tire size: 315/70 22,5, tire condition: 30 %, axle configuration: 6x2, wheelbase: 5,800 mm, next inspection (TÜV): 07/2026, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,800 mm, loading space volume: 53 m³, loading space length: 9,800 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2017, operating hours: 461,575 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, air conditioning, cabin, cooling unit, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, tail-lift, truck registration, Reference Number for inquiries: 40963 MAN TGM Lrjdpfxsyun Ahe Adtok * Year of manufacture: 2017 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Electric window lifters * Cab * Automatic climate control * Tail lift * Air suspension * Lift axle * Power steering * Heated seats * Auxiliary heater * Cruise control * On-board computer * Differential lock * Insulated box body * Refrigerated box body * Trailing/steering axle * Temperature recorder * Refrigeration unit: Carrier * Diesel + Electric operation * Digital tachograph * Radio CD * Adaptive cruise control * Lane departure warning system * OBU (On-Board Unit) pre-installation * AdBlue tank * Fog lights * Comfort air-suspension seat * Sun visor * Inspections: Main/Emission test valid until 07/2026 * Transmission: Automatic * Suspension: Air / Air * Gross vehicle weight: 26,000 kg * Unladen weight: 12,560 kg * Payload: 13,440 kg * Permissible gross weight: 26,000 kg * Tire condition 1st axle: 30% -- 30%, Tire size: 315/70 R22.5 * Tire condition 2nd axle: 40%|40% -- 40%|30%, Tire size: 315/70 R22.5 * Tire condition 3rd axle: 30% -- 30%, Tire size: 315/70 R22.5 * Wheelbase: 5800 mm * Tire sizes: 315/70 R22.5 * Internal dimensions: L=9800 mm, W=2480 mm, H=2200 mm * Internal volume*: 53 m² * Pallet spaces: 24 * Body: Wilke * Refrigeration unit: Carrier Supra 1250MT * Tail lift: Palfinger 2500KL * Lifting capacity: 2500 kg * Loading dimensions: L 7500 x W 2480 x H 2300 mm * Rear view camera * On request, we will send you a video and more information Disclaimer: Subject to change, prior sale, and errors. More pictures and videos can be found on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Application for all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing * TüV approval, registration service * Transfer/delivery of commercial vehicles Please contact our trained specialist staff – we are happy to advise you.

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 810 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 250 mm, number of axes: 5, table length: 3,000 mm, table width: 1,500 mm, Equipment: documentation/manual, We are offering this used Format-4 PROFIT H350 16.30 machining centre with through-feed, year of manufacture 2019. Includes 5-axis interpolation Type: PROFIT H350 16.30 Serial number: 302.06.014.19 Code: 0053 Voltage: 400.0 V Connection: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Year of manufacture: 2019 Control voltage: 24 VDC Min. fuse protection: 47 A Max. fuse protection: 64 A Minimum air pressure: 8 bar Air consumption: 350 Nl/min If you have any questions or require further information, please feel free to send us a message or call us. Lrodpfx Adeyw H A Hjtok

Condition: used, mileage: 285,089 km, power: 309 kW (420.12 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 9,440 kg, maximum load weight: 8,560 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, wheelbase: 5,700 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2012, construction height: 4,000 mm, number of beds: 1, Equipment: air conditioning, cruise control, onboard computer, tail-lift, trailer coupling, The Iveco Stralis AS 190 S 420 ECO, built in 2012, is a reliable commercial vehicle distinguished by its Euro 5 diesel technology. With an impressive engine output of 309 kW (420 hp) and a displacement of 10,308 cc, it delivers high performance and efficiency. The vehicle has a mileage of 285,089 km and is equipped with an automatic transmission, which enhances driving comfort. Ledpfewwmx Iox Adterk The truck is finished in an attractive yellow metallic paint and meets the requirements for the green emissions sticker. With a valid technical inspection (HU) until February 2026, the Stralis is ready for use without the need for an imminent inspection. Its dimensions of 4,000 mm height, 2,550 mm width, and 9,480 mm length make it highly versatile, further supported by a wheelbase of 5,700 mm. Key features include air suspension, automatic climate control, a tow hitch (AHK), and a retarder, providing efficient braking support. The truck is also equipped with a tail lift (LBW) for easier loading operations. Sale exclusively to commercial operators (agricultural businesses, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 371,140 km, power: 309 kW (420.12 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 10,170 kg, maximum load weight: 15,830 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,600 mm, Year of construction: 2012, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Cylinder head gasket defective The used Iveco STRALIS AS 260 S42 Y/FS-CM Eco is a high-performance truck equipped with a 10,308 cc diesel engine producing 309 kW (420 hp). First registered on 03/12/2012, the vehicle has a mileage of 371,140 km. It complies with the Euro 5 emissions standard and features an automatic transmission. With a length of 9,600 mm, a width of 2,550 mm and a height of 4,000 mm, this truck offers a permissible gross vehicle weight of 26,000 kg. The yellow (metallic) vehicle is equipped with a green emissions sticker (class 4) and comes with practical features such as a steering axle, reversing camera, and integrated air conditioning. It offers seating for two persons and has two doors. The truck has previously had one owner and is in used condition. Ledowzzkyepfx Adtsrk In addition to the technical specifications, the seller offers various flexible sales and service options, including the possibility of viewing and delivery within Germany. Sale exclusively to traders (agriculture, self-employed professionals, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 835,837 km, power: 309 kW (420.12 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2010, construction height: 3,850 mm, number of beds: 1, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile used truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a powerful diesel engine that delivers 309 kW (420 hp) and meets Euro 5 emissions standards. Lrjdor Uzgcspfx Adtjk Equipped with an automatic transmission and a steerable and liftable axle, the STRALIS offers excellent maneuverability and is flexible in use. The vehicle is presented in a striking yellow metallic paint finish. With an overall height of 3,850 mm, a width of 2,550 mm and a length of 9,480 mm, it is designed for heavy load transport and has a permissible gross vehicle weight of 26,000 kg. The equipment includes two doors and two seats, air conditioning and an INTARDER braking system, which provides additional safety. The truck is approved as a truck and has a green environmental sticker (4), which allows it to be used in environmental zones. With only one previous owner and regular maintenance, the STRALIS is ready for efficient use. Steering and lifting axle Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 366,769 km, power: 309 kW (420.12 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 9,630 kg, maximum load weight: 16,370 kg, overall weight: 26,000 kg, tire size: 315/80 R22,5, fuel: diesel, brakes: intarder, color: yellow, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 2, total length: 9,500 mm, Year of construction: 2011, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, air conditioning, onboard computer, traction control, trailer coupling, Shifts up to 2nd gear. Lodpfx Aeupac Iodtsrk The used Iveco STRALIS AS 260 S42 is a reliable truck of emission class Euro 5, making it ideal for commercial operators in sectors such as agriculture and export. Equipped with a powerful 309 kW (420 HP) engine and a displacement of 10,308 cc, it offers impressive performance. The truck features an automatic transmission and has a mileage of 366,769 km. First registered in October 2011, the vehicle is in good condition and is supported by a green environmental badge. The yellow metallic paintwork gives the vehicle a striking appearance. Useful features such as a steering axle, lift axle, and an INTARDER system provide enhanced handling and safety. In addition, the installed air conditioning ensures driving comfort. This Iveco truck has a total height of 4,000 mm, a width of 2,500 mm, and a length of 9,500 mm, with a permissible gross weight of 26,000 kg. For transport purposes, the vehicle offers cargo options and a trailer hitch mechanism (AHK). Interested buyers can inspect the vehicle without prior appointment from Monday to Friday or on Saturdays. Sale only to commercial operators (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: good (used), Safe, vault, security cabinet, armored safe, furniture safe, high-security safe, security cabinet, fireproof steel office cabinet Lodeykq Acopfx Adtsrk -Manufacturer: Security safe Frankfurt, safe, security cabinet, fireproof cabinet -Internal dimensions: 580/400/H1045 mm -Dimensions: 700/540/H1250 mm -Weight: 335 kg