Used Sauer Schweißtechnik Welding Machine for sale (66,238)

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t Gjdjcxxwnspfx Aqiska stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm Godpfxovuz N Rj Aqioka incl. foot switch

Year of construction: 2004, condition: used, Hollinger 4-point welding machine type ASP-L Gjdpfeylingsx Aqioka

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine. Gkjdpjyx Hpiefx Aqija

Year of construction: 2004, condition: excellent (used), Offered from an insolvency sale is a DC WIG welding machine. Manufacturer: Migatronic Model: Pilot 2400 Year of manufacture: 2004 Machine no.: 04050694 Technical data: 380 volts Welding range: 5-240 amps Welding performance: Gkodpsfthy Refx Aqiea 240 amps at 35% duty cycle 170 amps at 100% duty cycle 2/4-cycle operation Pulse function HF ignition Additional water cooling unit KG 2, no. 25730509, 220 volts 8-meter welding torch package with ground cable – without pressure reducer Dimensions in mm, approx.: 510x370x220

Condition: used, Year of construction: 2000, current intensivity bis 300 A burner heads . dimensions of the machine ca. . m Gjdoyacp Hjpfx Aqioka

Condition: used, Year of construction: 2000, current intensivity bis 350 A burner heads . dimensions of the machine ca. . m Gjdoyacpyspfx Aqieka

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 total power requirement . kW Gkodpfx Ajucgvasqioa weight of the machine ca. 1,4 t

Condition: good (used), Welding current: 10 - 200 A Weight: 103 kg Godpoyrglcefx Aqieka Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Dalex-Werke Pms 10-2 380V 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Godpfeg Rcpxsx Aqiska Rated primary voltage 380 V - 50 Hz Open-circuit voltage of 5.6 V Electrode force: 65-390 daN Machine weight: 341 kg

Condition: good (used), Year of construction: 2010, MIG MAG inert gas welding machine Esseti Query 500 c with removable wire feed case Gkjdpfx Aot Iq Edeqija 60 % 500 AH 100 % 380 AH Torch MB 501 4 meter incl. pressure reducer

Year of construction: 1970, condition: used, Spot welding machine Gsdpfok Tt Hfex Aqijka Manufacturer: Dalex Type: SF 16 Continuous power output: 16 kVA at 50% duty cycle.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Godpfsqpgntjx Aqioka Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Suction unit with hose guide

Condition: good (used), Year of construction: 1980, TIG welding machine Messer Griesheim GW 200 DC 400 Volt Gkedpfstd Hhdox Aqioa

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Gjdpfxougv S Se Aqioka

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 160 kg, 100 kVA Seam Welding Machine for Sheet Metal Fabrication A powerful resistance seam welder for producing continuous, gas-tight welds on stainless and low-carbon steel sheets. Suitable for HVAC ductwork, tanks, containers, drums, and general sheet metal applications. Available in horizontal and vertical configurations; the welding speed is infinitely adjustable, and the water-cooled electrode system supports a 50% duty cycle in production use. Technical data: Rated capacity: 100 kVA Welding capacity, stainless steel: 1.0 + 1.0 mm Welding capacity, low-carbon steel: 1.2 + 1.2 mm Electrode arm length (throat depth): 400 mm Electrode stroke: 120 mm Welding speed: 0 – 2 m/min (continuously adjustable) Godpfx Aoymc Szoqioka Duty cycle: 50% Cooling: water-cooled, flow rate 15 l/min Input voltage: 380 V, 50 Hz Dimensions (L × W × H): horizontal 1.3 × 0.7 × 1.9 m / vertical 1.3 × 0.8 × 1.9 m Weight: horizontal 500 kg / vertical 550 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. unused still in original packaging. Gkedpfotkuvxex Aqisa

Condition: excellent (used), Year of construction: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine Cloos 403 machines are available. Year of manufacture: from 2005 to 2012. Other models of the Cloos 503 welding machines are in stock Gsdpfx Aqotkunusijka

Condition: excellent (used), Year of construction: 2003, Cloos GLC 451 C welding machine. Year of construction: 2003 With welding package Godpfotkurijx Aqiska

Condition: excellent (used), 1 x TransPuls Synergic 5000R and 2 x TransPuls Synergic 4000R welding machines. Attention: the price is only for one welding machine Godotkuyiopfx Aqiska

Condition: new, Year of construction: 2025, longitudinal and transversal seam welding machine --- Power at 50%: 80kVA Highest welding-current: 35,9kA Electrode force: 100-600daN / double stroke Throat depth: 550mm --- Weld control: Filius classic 128 program --- Extra Equipment: - foot pedal - flow monitor Gkjdpewqmrzofx Aqija - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 80kVA Gjdpfxjwqmrnj Aqioka Short circuit-current: 45,4kA Electrode force: 100-600daN / single stroke Throat depth: 350mm --- Weld control: MPS 100mono (8-times, 1-program) --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 63kVA Short circuit-current: 26,3kA Electrode force: 65-390daN / single stroke Throat depth: 450-750mm --- Gksdpfx Aqov T Unwjisa Weld control: MPS 15036 (5-times, 1-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Shielding Gas Welding Machine MIG-O-MAT Type U 405 Serial No. Year of manufacture 1991 Output 400 amps = 60% duty cycle 280 amps = 100% duty cycle Adjustment range 18 steps Torch hose length 5 meters Power supply 380 V, 50 Hz, 32 amp plug - Spot and interval welding function - 2-stroke and 4-stroke welding functions - Wire feed with 2-roller drive - Water-cooled - Shielding gas pressure regulator - Supplied with 1.2 mm welding wire Dimensions L x W x H: 1300 x 500 x 900 mm Weight approx. 200 kg Gkedpfx Aqeyy Dfqeisa In good condition

Year of construction: 1995, condition: used, 1 used, well-maintained, water-cooled MIG-MAG welding machine Manufacturer: ARTEC Model: W 501 Year of manufacture: 1995 Technical data: Welding current range up to 500 A Weight approx. 250 kg Accessories / Special features: - Water cooling Gkodpfx Aob Nd E Reqioa - Separate wire feeder ARTEC DV-W1 with 4-roller wire feed - Includes hose set, pressure regulator, and grounding cable Further technical data, see images! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel