Used Schenker Fa 6S for sale (4,449)

Condition: new, power: 227 kW (308.63 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,520 mm, loading space width: 2,470 mm, loading space height: 2,500 mm, Year of construction: 2026, Equipment: air conditioning, electronic stability program (ESP), soot filter, Equipment: * Mechanically reinforced cab suspension * Extended Day Cab * Exterior sun visor, green and light-transmitting * Fog lights and cornering/turning lights Rcedsy Dmvgspfx Alcjf * Halogen headlamps * Daytime running lights * Green-tinted windows * Electrically adjustable mirrors * Signal white * Headlamp surrounds and bumper in cab color * Bottom sealing, cab step and fender in cab color * Chassis color: anthracite grey * Pneumatic steering column lock * Manual roof hatch * Driver's seat: Air-suspended luxury driver’s seat * Air Top 2000 auxiliary heater * Driver's seat armrest * ECAS remote control * Converter 24V to 12V, 15A, 180W * Engine tunnel storage compartment * Air conditioning * Adaptive cruise control with FCW and AEBS-3 * Toll system pre-installation * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FM/DAB/DAB+ radio with speaker including phone connection * Driver Performance Assistant * Manual master switch * Electronic Stability Control (VSC) * Reversing warning system * Lane change warning system * Hill start assist * DAF Side and Turn Assist * Speed limit recognition * DAF Drowsiness & Distraction Detection * Rear axle: 11.50 t, air suspension, SR1132 * Front axle: 7.50 t, parabolic, 152N * Rear axle 1: 11,500 kg, load index 145 * Silver grey wheel trims * Goodyear * Tyre pressure monitoring system * Steel disc wheels, silver grey * F1, 315/70R22.5 GO EQMS 158/150 L Steering BBA 3P * R1, 315/70R22.5 GO EQMD 154/150 L Traction BBB 3P * Mechanical differential lock * 8-speed PowerLine 8AP1200 overdrive gearbox, 4.89-0.64 * PX-7 engine, 227 kW/308 hp. Cab badge: 310 * Emission standard Euro 6 * Traction control (ASR) * Standard transport, full version * Idle shut-off, 5 minutes * PowerLine automatic transmission, 8-speed * Rear axle ratio 5.13 * Parking brake actuation with test position * Exhaust brake * Wheelbase 5.85 m / rear overhang 2.68 m * One wheel chock * Longitudinal members 270/8.0 mm, without inner reinforcement * Aluminium fuel tank, 340 l * Front underrun protection * Splash protection * 30 l AdBlue® tank, right side of chassis * Fuel tank left * AdBlue® tank filler cap without lock * Use with drawbar, type plate, up to max. GVW * Pneumatic coupling for trailer, turntable * Crossmember D85-Dc70-V25, coupling D85 A, fitted * Trailer electrical connection + EBS, 24V/2x7-pin * Side marker lights * Tail lift application * Alternator 100 A, batteries 2 x 175 Ah * Permissible gross vehicle weight (GVW) max. 18,000 kg * Air intake above, behind cab * Maximum ambient temperature 38 degrees * Cold climate * Heated water separator * Warranty Plus – Driveline – 3 years – 200,000 km Body: * CoolerBox2.0 Maxi refrigerated box body * Colour: candy white * Internal dimensions L 7520 x W 2470 x H 2500 mm * Truck insulation body with reinforced insulation for temperature-controlled transport * Body panels in DUROLITE® sandwich construction * Panel thickness: side walls: 60 mm, front wall: 100 mm, roof: 100 mm * Tested and certified according to ATP-FRC in combination with 85 mm thick rear doors * Food-safe, TÜV-certified according to HACCP * Multi-layer insulated floor, 103 mm thick * Aluminium chequer plate surface (quiet floor) * Floor water drain including 2 rubber plugs * Double-wing rear doors, door thickness 85 mm * DUOFLEX® door sealing system for high tightness and extra-easy door operation * Large door retainers (stainless steel/aluminium), 2 pcs *--- (content cut off)

Condition: new, power: 270 kW (367.10 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, soot filter, STANDARD SPECIFICATION * Day Cab * Mechanical cab suspension * Passenger seat: cinema style with fabric cover Rcedpfx Alopbcxkecjf * Adaptive Cruise Control with FCW and AEBS-3 * Lane departure warning system * Goodyear * MX-11 engine, 270 kW/367 hp, cab badge: 370 * Emission standard Euro 6 * Automated gearbox, TraXon, 12 speeds * Wheelbase 4.00 m / rear overhang 1.70 m * Standard component arrangement * Fuel tank on left * DAF Connect * Warranty Plus Powertrain – 3 years – 500,000 km * Options * Exterior sun visor * Flexible cab step * Two LED spotlights for rear cab wall * Rotating beacons on cab front, pre-installed * Rear window: double glazed * Central locking, 3 keys, 2 remote controls * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver seat: Luxury Air * Armrests on both sides of the driver seat * Dashboard table * Cooler or refrigerator * Automatic cab climate control * Residual heat pump * Sunblind driver’s side * Roof hatch with electric operation * ECAS remote control with extended functions * FMS connector, extended and prepared * Preparation for toll system * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 90 km/h * DAF Infotainment Luxury Plus, luxury speakers * Antennas: DAB prep. radio, 2x mobile, GNSS extra: CB * Wireless charging device * Reversing warning system * Front: 9.00 t, parabolic, 187N * Front axle 1, 9,000 kg, load index 160 * Rear axle 1, 11,600 kg, load index 145 * Front axle(s): 385/65R22.5 * F1, 385/65R22.5 GO OMTSHL 164/000 K Steering CBB 3P * R1, 315/80R22.5 GO OMTD 156/150 K Traction DBB * ECO performance * Off-road operation with rocking-free function * Rear axle ratio 3.08 * MX engine brake * Spring-loaded brake cylinder on first front axle * Parking brake assistant * Exhaust pipe on right * Rear light mounting with license plate holder * Operation with drawbar coupling, type plate, up to max GCW * Cross member D137 + Ringfeder coupling D137 * Pneumatic coupling for trailer, rotary coupling * Electrical connector for trailer, 24V/15-pin * Analog bodybuilder signals and warnings * Chassis with analog connector for engine speed control * ECAS control * Preparation for aftermarket switches * CAN J1939 functions in bodybuilder plug * Additional spare cable * Application connector for BB remote control * Preparation for tipping application air control * Side marker lights * Body mounting BAM 2, plate profile * First gearbox PTO NH/4c-R-32/25 * Alternator 110 A, batteries 2x 230 Ah * Max. GCW drawbar/coupling 57,000 kg * Max. gross train weight driven axles 40,000 kg class 3 * Dust shield First registration: 17.12.2025 Body: * Meiller crane tipper model 26 * Trailer hydraulic lines * Comfort package * Lashing eyes * Base crane HMF 1320-KS-RCS * Base crane features * Foldable, fully hydraulic 13 mt * Loading crane lifting class H1 / crane group B3 / lifting movement HD5 * Basic version with radio remote control (RC-d) * Single-circuit proportional control valve (RC-d) for * Radio remote control for high * speed, intensive operation, and * very precise handling. * Including control levers on * the control valve. For emergency operation only. * Manufactured and equipped according to EN 12999. * Power Plus double linkage. * Over-knee articulation at 15° between the inner * boom and knuckle arm. * RCL - CE safety system * Subframe with double crossmember. * HDL-d tempo control * Spirit level for inclination angle at * the operating positions. * Load capacity ...

Condition: new, power: 212 kW (288.24 HP), fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Equipment: * Mechanically reinforced cab suspension * Sleeper cab * Central locking, 3 keys, 2 remote controls * Exterior sun visor, green, translucent * Fog lights and cornering/turning lights * Halogen headlights * Daytime running lights * Green tinted windows * Electrically adjustable mirrors * Rear view camera * Adjustable high roof spoiler * Long side skirts * ETD white * Headlight surrounds and bumper: cab color * Roof spoiler in cab color * Side skirt color: cab color * Lower protection, cab step and mudguards in cab color * Chassis color: anthracite grey * Pneumatic steering column lock * Manually operated roof hatch * Driver’s seat: air-suspended luxury seat * Auxiliary heater Air Top 2000 * Lower bunk, standard height * Curtains * Driver’s seat armrest * ECAS remote control * Converter 24V to 12V, 15A, 180W * Air conditioning * Digital tachograph, VDO version G2V2A * Speed limiter set to 90 km/h * FMS interface, prepared * Adaptive Cruise Control with FCW and AEBS-3 * Toll preparation * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FM/DAB/DAB+ radio with speakers incl. phone connection * Driver Performance Assistant * Reversing warning with self-adjusting volume * Manual main switch * Lane departure warning system * Electronic Stability Control (VSC) * Hill start assist * DAF Side and Turn Assist * Speed limit recognition * DAF Drowsiness and Distraction Detection * Rear axle: 10,500 kg, air suspension, SR10.15 * Front axle: 6,000 kg, parabolic, 60N * Front axle 1: 6,000 kg, load index 146 * Rear axle 1: 10,500 kg, load index 142 * Silver-grey wheel embellishers * Goodyear * Tire pressure monitoring system * Steel disc wheels, silver-grey * F1, 285/70R19.5 GO KMAXS2 146/144 L Steering CCA 3P * R1, 285/70R19.5 GO KMAXD2 146/144 L Traction CCA 3P * Rear axle ratio 4.63 * Mechanical differential lock * 8-speed PowerLine 8AP1200 overdrive transmission, 4.89-0.64 * Engine PX-7, 212 kW/287 hp. Cab badge: 290 * Emission standard Euro 6 * Traction control (ASR) * Idle shut-off automatic, 5 minutes * PowerLine automatic transmission, 8-speed * Parking brake control with test position * Exhaust brake * Wheelbase 5.60 m / rear overhang 2.40 m * One wheel chock * Fuel tank, aluminium, 340 l * AdBlue® tank 30 l * Suitable for use with drawbar, type plate, up to max. GVW * Pneumatic connection for trailer, rotary coupling * Crossmember D85-Dc70-V25, coupling D85 A, mounted * Electrical connections for trailer + EBS, 24V/2x7-pin * Side marker lights * Tail lift application * Alternator 100A, batteries 2 x 175Ah * Technically permissible chassis weight max 16,000 kg * Air intake above, behind the cab * Cold climate * Heated water separator * Driveline Plus Warranty – 3 years/200,000 km Rcodpfxjy A Uuzo Alcjf Body: * WECON motor vehicle flatbed body * Series Count * Type MPR 740 SG * Standard internal length 7,300 mm * Internal height 2,600 mm with sliding roof * Side loading height 2,520 mm * Rear loading height 2,470 mm * Steel welded construction consisting of cross members and longitudinal beams * Laminated plywood floor (multiple layered) with resin-coated surface, approx. 24 mm thick * Worklight(s) per piece * 1x at the upper left of the rear stanchion * Perforated outer frame for fixed bodywork * With V-groove for lashing rings and welded tarp hook rail * Lashing rings, starting approx. 500 mm from front wall, 8 pairs for 7,500 mm loading length * Lashing points, 1 pair, * Sandwich front wall with ...

Condition: used, x-travel 1600 mm y-travel 700 mm z-travel 850 mm control Heidenhain TNC 407 taper ISO 50 Table dimensions 1950 x 650 mm spindle speeds 80 - 3000 U7min voltage 400 V total power requirement 23 kW Coolant The tech. Data are manufacturer or operator information and therefore non- Rcodpeyqtrasfx Alcef binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2011, functionality: fully functional, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, Matched Set of Five Brother Industrial Overlock Machines from the MASI JEANS Factory This lot consists of five Brother industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. Brother's industrial overlock machines are known worldwide for dependable high-speed operation, clean seam formation and low maintenance requirements. The lot combines two Brother FB-N210 4-thread overlock machines (2012) with three Brother FA-V92A-5050 4-thread overlock machines (2009) - one closely matched platform generation. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched overlock production set with common operating principles, shared spare parts inventory and simplified maintenance. Ideally suited for denim manufacturing, jeans assembly, knitwear, workwear and other applications requiring fast, durable overedging seams. Bundle Contents Machine 1 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 37B-7268 Machine 2 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 36B-7267 Machine 3 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 4B-7212 Machine 4 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 30B-7213 Machine 5 Model: Brother FA-V92A-5050-57-E3V Internal Reference: 31B-7214 Technical Specifications Manufacturer: Brother Industries, Ltd. Model Series: FB-N210 (2 machines) / FA-V92A-5050 (3 machines) Machine Type: Industrial 4-Thread Overlock (Serger) Sewing Machine Country of Manufacture: Japan 4-Thread Overlock Configuration Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Redpfxsznyx Ho Alcecf Professionally serviced (ERMACO ISM service partner) Production Benefits • Factory-matched Brother overlock production set • One platform generation - common parts and know-how • High-speed overedging with clean seam formation • Reliable performance during continuous production • Reduced operator training requirements Why Purchase This Lot • Five professional Brother overlock machines • Matching machines from one factory • Complete overlock capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion Applications • Jeans production • Denim manufacturing • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing • Uniform production • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Year of construction: 1988, condition: used, table mounting size: 650 x 1600 mm movement x: 1250 mm movement y: 800 mm movement z: 620 mm spindle taper: ISA 50 spindle turning speed range: 5 - 2000 rpm carriages continuously adjustable: 5 - 3000 mm/min rapid move: 10 m/min space needed: 3850 x 3000 x 3200 mm weight: 11100 kg FIDIA-control ADDENDUM V 05-E CNC 12 Rsdpfjxnq Isx Alcjcf Only 8577 hours on-time!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,960 h, functionality: fully functional, machine/vehicle number: 2416, grinding length: 1,500 mm, overall weight: 24,000 kg, TECHNICAL DETAILS Grinding length: 1,500 mm MACHINE DETAILS Rjdpfx Aljxvxn Ascecf Dimensions & Weight Space requirement: 3,900 x 3,500 x 2,500 m Machine weight: 24 t Operating Hours Operating time: 21,727 h Production time: 11,960 h EQUIPMENT Hoffmann KSM filter system 2 spare measuring heads Marposs S/500 Prismatic supports

Condition: used, Double diaphragm pump with pneumatic drive, DEPA type DH40-FA-ZRT Pneumatic diaphragm pump, double pump Serial No.: B1802498 Year of manufacture: 09.05.2018 Temperature: max. 130°C Size: 40 Particle size: max. 16 mm Suction head: approx. 2 m Suction head, product-filled: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/8" Suction connection: 1 1/2" Pressure connection: 1 1/2" - Self-priming - Aluminum housing - Diaphragm plates made of stainless steel - Diaphragms made of studded E4® PTFE composite - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm Rcjdpfeib D H Ujx Alcof Weight: 15 kg Very good condition

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Redjx U Dfgjpfx Alcocf Shipping possible at extra cost!

Condition: used, machine/vehicle number: 1210A15, mileage: 29,049 km, power: 96 kW (130.52 HP), first registration: 01/1984, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: mechanical, Equipment: all wheel drive, parking heater, trailer coupling, TUV and AU are made NEW!!! KFZVersicherung 270, -Euro per year!!! KFZ is differential taxed VAT not showable. The Magirus is in a good and very well maintained condition directly from the THW only a few months out of service, and equipped with: double cab with 9 to 11 seats roller shutter body with shelves and drawers, four-wheel drive, rear axle lock, several other Magirus / Iveco vehicles are still in my offer e my vehicles are with data and prices on my homepage r info??? Call 0049 (0) 2248 le Gru?e Your Philipp from the Hanfbachtal Rcodpfx Asqx Sv Aolcof

Condition: used, functionality: fully functional, machine/vehicle number: 1412A1, mileage: 48,477 km, power: 163 kW (221.62 HP), first registration: 07/1999, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro2, Year of construction: 1999, Equipment: ABS, all wheel drive, compressor, trailer coupling, TUV and AU are made NEW ! ! Special army version with long wheelbase and leaf springs r 16.222 FA is in a super good condition, also the body is in a super condition ! ! ! The MAN are directly from the military in original condition ! ! ! ! Ready for immediate use, was very well maintained and serviced by the military !!! Equipped with: Manual gearbox with 8 gears plus off-road reduction , tipper cab , permanent all-wheel drive with differential lock center and rear , 7 tons winch, which can pull either forward or rearward , plastic shelter with large air conditioning system (inside dimensions L / W / H 4890 / 2020 / 1940 mm).e L/W/H 4890 / 2020 / 1940 mm)this sits on a frame with storage boxes at the front and balcony with railing at the rear, the frame is fastened with 4 twistlocks, the MAN has 8 twistlocks on which a 1 x 20 foot container or 2 x 10 foot containers can be fastened and has a double-axle. Container can be attached and has the dimensions L/W 5850 x 2255 mm and 2 x 2790 x 2255 , the MAN 16.222 has a military trailer hitch with test mark , think that the Tuv will register you on request , diesel engine with 6871cm? displacement, (truck approval 3 seats in front), super good tires with the size 365 / 85 R 20, and much more. Ideal as a rally vehicle or hobby vehicle, WOW and a huge pleasure to drive! ! ! Several other all-wheel drive vehicles and other military vehicles are still available in my offer. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call . - Many greetings from Philipp in the Hanfbach valley Rcjdpfxsqx Sxto Alcef

Condition: used, mileage: 98,500 km, power: 217 kW (295.04 HP), first registration: 05/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2025, brakes: retarder, color: blue, gearing type: automatic, total width: 2,550 mm, total height: 3,300 mm, loading space length: 9,900 mm, loading space width: 2,470 mm, loading space height: 800 mm, Year of construction: 2022, Equipment: ABS, air conditioning, navigation system, soot filter, DAF LF290 FA 18t flatbed----Nutzfahrzeuge Göppl GmbH - DAF authorized dealer----EZ: 10.05.2022 HU: 01/2026 SP: 07/2025 Curb weight: 7,887kg Payload: 10,123kg Equipment: local transport cabin * Sun visor outside * Halogen headlights * Driver's seat: Air-suspended luxury driver's seat + armrest * Passenger seat: Fixed, velour * Air conditioning * Navigation radio with two speakers * DAF Connect * Digital tachograph VDO 1c * Adaptive cruise control with FCW and AEBS * Engine PX-7, 217kW/295PS, EURO6e * 12-speed AS-Tronic transmission * Rear axle ratio: 4.63 * Mechanical Differential lock * Wheelbase: 6.90m(!!!) * Tires: 315/70R22.5: Profile approx. 9 mm front, rear: 14mm * Suspension: * -Front: 7.5t parabola * -Rear: 13.0t air-suspended * Plastic fuel tank: 200 liters * AdBlue tank 25 liters * Mounting brackets BAM1 * Air intake duct on the driver's cab roof ----CONSTRUCTION: Flatbed construction in special design: Dimensions of loading space: * Length: approx. 9,900mm * Width: approx. 2,470mm * Side wall height: approx. 800mm Construction:* Floor made of waterproof glued screen-printed panels. * Floor thickness 30mm, suitable for high point loads * 15 insert sleeves for rectangular tubes approx. 80 x 80 mm * External frame profile with lashing options every 125mm. * Lashing straps can also be attached when the side wall is closed * Aluminum side wall 800mm high, foldable and removable * Front wall stanchions for side loading by forklift * Middle stanchions and rear stanchions foldable and removable * Rear stanchions set lengthways. * All stanchions Kinnegrip system * Substructure hot-dip galvanized * 1x plastic tool box Optional: * Conversion of tachograph to version G2V2 * OBU installation * Tachometer test Rcodpfjvzdtrsx Alcsf ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF authorized dealer - DAF service partner - FIAT-Professional Service Partner Subject to errors and prior sale Sale to commercial customers only

Year of construction: 1995, condition: used, machine/vehicle number: 4141, Emulsion maintenance trolley FA-300/U Blotenberg, filter unit -WT 114- Offered here is an emulsion care trolley/emulsion filter of the company Blotenberg. Technical data: Manufacturer: Blotenberg Saugsysteme Type: FA-300/U Motor power: 0,25kW/ 220V / 3,1A Year of manufacture: 1995 Flow rate: 300l/h Serial number: 4141 Redpfx Aslf D Ugjlcscf dimensions: 1000 x 900 x 450mm Suitable for: Emulsion Coolant Cleaning solution Wet cutting machine tools Parts washers Mode of operation according to the manufacturer: The emulsion maintenance cart continuously draws in the contaminated emulsion mixture, separates the substances and returns the cleaned emulsion to the machine. All this is done purely physically - no spinning or centrifuging.

Condition: used, mileage: 960,000 km, power: 221 kW (300.48 HP), first registration: 06/2012, fuel type: diesel, overall weight: 18,600 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, tail-lift, * Daf FA LF 55.300 EEV * Manual transmission * Euro 5 EEV * Air conditioning * Sleeper cab * Refrigerated box body * Suitable for frozen and fresh goods * Cruise control * Partition wall * Side door * Rear swing doors * Carrier cooling unit (diesel + electric) * Model: Carrier Supra 750 Silent * Temperature range: -30°C / +30°C * Bär Cargolift tail lift * Max. lifting capacity: 1,500 kg * Tail lift with stopper * Internal length: approx. 7.40 m * Internal width: 2.48 m * Internal height: 2.70 m * Overall length: 10.05 m * Overall width: 2.55 m * Overall height: 3.80 m * Wheelbase: 5,850 mm * Gross vehicle weight: 18,600 kg * Trailer coupling * VIN: XLRAE55GF0L416970 * Power: 221 kW * Engine capacity: 6,693 ccm Redpfx Aoy Rwzmelcecf * Year of manufacture: 22/06/2012 * VAT not included, subject to margin scheme taxation Phone: and WhatsApp

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, table load: 500 kg, TECHNICAL DETAILS Travel, X-axis: 350 mm Travel, Y-axis: 250 mm Travel, Z-axis: 220 mm Additional travel (U/V axis): ± 32 mm Worktable (W x D): 590 x 514 mm Load capacity: 500 kg Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions (W x D x H): 800 x 600 x 215 mm MACHINE DETAILS Redpfx Aleytfx Dscecf Control: Mitsubishi - Advance - CNC EQUIPMENT Cutting in water bath Automatic wire threading Wire chopper Cooling unit

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Rodpfsu Nvwvox Alcscf Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm Rcjdpfx Aoxni T Hjlcof U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h

Condition: used, 1x Hohner Stitching Head 43/6S, used The Hohner 43/6S is a high-quality, narrow stitching head designed for professional saddle-stitching of booklets and other printed products. This used stitching head offers reliable performance and precise stitching. Key features: - Versatile: Suitable for making booklets, brochures, and other products that need strong stitching - Compatible: Can be used in stitchers from different makers like Horizon, Duplo, or Bourg - Flexible: Works well with different paper sizes and weights - Easy to use: Can be adjusted without tools for quick setup - Precise stitching: Delivers clean and even stitching of high quality - Wire thickness: Works with wire from 0.4 to 0.6 mm thick, good for many types of jobs - The "S" in the model name means "slim", showing it has a compact design Technical specs: - Staples: Uses standard staples - Maximum stitching thickness: Up to 5 mm - Paper weight: Can handle paper from 60 to 300 g/m² - Size: Compact design to fit easily into existing systems All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Rcsdpsw Ewyxjfx Alcsf Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, 1 Used Hohner Stitching Head 43/6S The Hohner 43/6S is a high-quality, narrow stitching head designed for professional saddle-stitching of booklets and other printed products. This used stitching head offers reliable performance and precise stitching. Key features: - Versatile: Suitable for making booklets, brochures, and other products that need strong stitching - Compatible: Can be used in stitchers from different makers like Horizon, Duplo, or Bourg Rcjdpfx Asw Ew Agjlcef - Flexible: Works well with different paper sizes and weights - Easy to use: Can be adjusted without tools for quick setup - Precise stitching: Delivers clean and even stitching of high quality - Wire thickness: Works with wire from 0.4 to 0.6 mm thick, good for many types of jobs - The "S" in the model name means "slim", showing it has a compact design Technical specs: - Staples: Uses standard staples - Maximum stitching thickness: Up to 5 mm - Paper weight: Can handle paper from 60 to 300 g/m² - Size: Compact design to fit easily into existing systems

Condition: good (used), Year of construction: 2003, Manufacturer: Econo-Pak Type: FA-KT Year of manufacture: 2003 Condition: good Includes: - 1-head folding box erector WVE-DR-R Hotmelt (2 adhesive patches) Rcedpfsvr Ivfsx Alcsf - Angle sealer - SIMATIC OP7 HMI - Nordson Hotmelt 3400V-2GAV4D/R hot melt device including hand glue gun - Hand control unit - Videojet 2-line for coding - 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm WITHOUT checkweigher Folding box conveyors

Condition: used, power: 189 kW (256.97 HP), fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, PRIVATE NEGOTIATION CHASSIS CAB XB 260FA 14 TON WHEELBASE 4500 mm. VEHICLE OPTIONS: - Reinforced mechanical cab suspension; - Fog lights; - Pneumatically adjustable steering column; - ADR; - Spare wheel; - PX-7 engine; - 200L fuel tank; - Rear underrun protection bar; - Rear light brackets; - Warranty Plus Vehicle 3 years - 200,000 km. Vehicle available at our Calcinato location: Via Statale, 98 – 25011 Calcinato (BS) Email: info. Tel. Offer valid for contracts and registrations until 30/04/2026, pending approval. Rsdpfxevc Ixbs Alcocf - We accept trade-ins of any vehicle subject to appraisal. - Financing or Leasing available for any amount according to customer needs. We are EXPERTS in remote negotiations, offering you the best solution for purchasing our vehicles even if you live far from the Province of Bergamo. Please verify the features of the published vehicle. Lodotruck s.r.l. declines any responsibility for possible unintentional discrepancies in the description shown in this advertisement. If you are interested in the vehicle, please reply to the ad indicating: your city and phone number. In case of a trade-in, indicate: make, model, colour, month and year of registration, mileage, main accessories, gearbox, KW/HP, and condition of the vehicle (preferably with attached photos). With this information, we can reply to you more quickly. CUSTOMER SERVICE OPENING HOURS: Monday to Friday 8:30 AM - 12:30 PM / 2:00 PM - 6:30 PM Saturday: 8:30 AM - 12:30 PM

Condition: used, power: 189 kW (256.97 HP), fuel type: diesel, empty load weight: 12,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, PRIVATE NEGOTIATION CHASSIS CAB XB 260FA 12 TON - WHEELBASE 3900 mm. Vehicle available at our Calcinato branch: Via Statale, 98 - 25011 Calcinato (BS) Email: info. Tel. Offer valid for contracts and registrations until 30/04/2026, subject to approval. - We accept trade-ins of any vehicle, subject to appraisal. - Financing or leasing solutions available for any amount according to the customer's needs. We are SPECIALISTS in remote transactions and can offer you the best solution to purchase our vehicles even if you live far from the Province of Bergamo. Rcjdpfx Aswkk Aqjlcof We invite you to verify the specifications of the listed vehicle. Lodotruck S.r.l. accepts no liability for any unintentional discrepancies with the description shown in the advert. If you are interested in this vehicle, when responding to the ad, please indicate: city and telephone number. In case of a trade-in, please specify: make, model, colour, month and year of registration, mileage, main features, transmission, kW/HP, and vehicle condition (preferably with photos attached). With this information, we can reply to you more promptly. CUSTOMER SERVICE HOURS: Monday to Friday: 8:30 a.m. to 12:30 p.m. / 2:00 p.m. to 6:30 p.m. Saturday: 8:30 a.m. to 12:30 p.m.

Condition: used, mileage: 978,189 km, power: 340 kW (462.27 HP), first registration: 10/2008, fuel type: diesel, overall weight: 17,990 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, tail-lift, Tel.: call (Contact · Telephone · Mobile · WhatsApp) * Truck Daf FA XF 105.460 * Dropside tarpaulin body with sliding roof, left, right, top * Swing doors * Foldable tail lift * Euro 5 * Air conditioning * Automatic transmission * Retarder * 2 x beds * 2 seats * Front: leaf suspension * Rear: air suspension * Unladen weight: 10,540 kg * Gross vehicle weight: 17,990 kg * Maximum weight: 20,500 kg * Engine capacity: 12,902 cc * Wheelbase: 4,900 mm * VIN: XLRAE47MS0E829585 * Engine type: MX340S2 * kW: 340 * Body length: 6.20 m * Body width: 2.50 m * Body height: 2.80 m * Total length: 8,820 mm * Total width: 2,550 mm * Total height: 4,000 mm Rcjder Npgqepfx Alcjf * First registration: 24.10.2008 * New air compressor * Fully roadworthy * Our details are provided without warranty or guarantee * Price net!

Condition: used, mileage: 500,343 km, power: 151 kW (205.30 HP), first registration: 11/2012, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, emission class: euro5, Equipment: tail-lift, * Call (Contact · Telephone · Mobile · WhatsApp) * Daf LF 45.210 4x2 Curtain Side Flatbed * Tail lift * Manual gearbox * Leaf spring suspension at front * Air suspension at rear * VIN: XLRAE45FF0L421579 * Engine type: FR15U2 * Euro 5 EEV * kW: 151 * Displacement: 4462 cc * Kerb weight: 6345 kg * Payload: 5570 kg Rcodpfjtziaajx Alcef * Gross vehicle weight: 11990 kg * Wheelbase: 5000 mm * Load bed length: 7.10 m * Load bed width: 2.50 m * Load bed height: 2.50 m * Vehicle length: 9300 mm * Vehicle width: 2550 mm * Vehicle height: 3600 mm * Tyres: 245/70 R 17.5 * MOT valid until 11/2022 * Net price * All information provided without guarantee

Condition: used, Year of construction: 2012, First Article Inspection of PCB Assemblies. Rcodpfx Alozhlbyscsf Total of 2 units available.