Used Scheuch Cyclone for sale (223)

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. Lredpfx Ajwc Nrnsdtok The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, Basic TWO Blasting Container – A New Standard in Sandblasting Introducing the SAPI Basic TWO Blasting Container—a true milestone in the sandblasting industry, designed with dual-container space to maximize functionality and efficiency. With its spacious layout and innovative features, this advanced sandblasting solution is perfect for professionals who need more room for their work without compromising on quality and performance. The Ideal Solution for Maximum Efficiency For companies seeking a comprehensive, practical, and high-quality sandblasting solution, the SAPI Basic TWO Blasting Container is the perfect choice. With its exceptional features and thoughtful design, it raises productivity and quality to a new level in the sandblasting industry. More Than Just a Container – A Complete Professional Solution The SAPI Basic TWO Blasting Container offers the perfect balance of space, functionality, and cutting-edge technology. Thanks to its innovative design and premium features, it is not just a simple container—it’s a fully operational solution that takes sandblasting to the next level of efficiency, effectiveness, and safety. Whether for large-scale projects with demanding requirements or precise detail work, this system provides the space, tools, and technology needed to complete the job efficiently, safely, and professionally. Key Features Lrodpoupzt Uefx Adtok ✔ Spacious Blasting Area & Technical Room – The dual-container design provides ample workspace for sandblasting while ensuring a separate technical room for optimized workflow and easy equipment access. ✔ Plug-and-Play Convenience – The SAPI Basic TWO Blasting Container is designed for ease of use, requiring minimal setup so you can start blasting immediately. ✔ Enhanced Air Quality – Equipped with the SAPI Air Filter, the container ensures a cleaner and healthier work environment by effectively controlling dust and airborne particles. ✔ Dual Cleaning Modes with 5kW Abrasive Vacuum Turbo Cleaner – Efficient handling of abrasive recovery and cleaning with two modes for maximum flexibility and control during operation. ✔ Durable, Rubber-Coated Walls – The interior walls are lined with heavy-duty rubber, ensuring resistance to intensive sandblasting operations while extending the lifespan of the workspace. ✔ Bright & Well-Lit Work Areas – Three high-powered LED lights are strategically placed to provide optimal visibility, ensuring precision and safety during sandblasting. ✔ Robust Premium 200-Liter Sandblasting System with Cyclone Cleaning – The powerful 200-liter system enables efficient and continuous blasting, while the integrated cyclone cleaning system improves abrasive quality, reduces waste, and boosts productivity. Blasting Room Dimensions ✔ Depth: 4.40 m ✔ Total Width: 2.25 m ✔ Total Height: 2.65 m

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills Lrjdpfxjghmpte Adtok crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Year of construction: 2025, condition: new, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Ledoghmp Njpfx Adtsrk Pellet plant Mills crushers Brsgistoyp Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. Lredohga Srjpfx Adtok We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines Lodshgbarjpfx Adtork TSF-Justinas

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Ledpfx Aeua U Tzodtjrk Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: good (used), Year of construction: 2018, Voltage in Volt: 400 Frequency in Hz: 50 IP protection class: 55 Protection class: I Power consumption in kilowatts: 4 Air volume without hose in m³/h - l/min: 489 - 8150 Maximum negative pressure in kPa-mbar: 30 - 300 Noise level in dB(A): 72 Tank volume in liters: 100 Main filter type: Polyester Star Filter Main filter area in cm²: 19500 HEPA H14 in cm²: - Inlet in mm: 70 Dimensions L x W x H in mm: 1130x600x1530 Ledor E Uwuepfx Adtsrk Weight in kg: 139 Optional Longopac system: - 5-pole three-phase plug: Included Plug with phase inverter: Included Filter shaker (manual): Included Accessory container: Included Removable container: Included Chassis with brakes: Included Motor protection switch: Included Pressure gauge: Included Three-phase side channel blower: Included Hose and cable holder: Included Cyclone plate: Included Vacuum relief valve: Included

Condition: new, Pressure sandblaster with 2 suction FERVI The FERVI 0605 Pressure Sandblasting Machine with 2 vacuum cleaners is equipped with a pressure tank to have a greater abrasive effect, double cyclone vacuum cleaner, paper filter, front opening, and ceiling light with 3 fluorescent lamps. Useful internal dimensions 1180 x 850 x 890 h mm Maximum capacity 150 kg Working pressure 6 ÷ 8 Bar Air consumption 31 SCFM 880 l / min Gun nozzles ø 6 - 7 mm Electric aspirator 2 x 230 V 50 Hz 1.2 kW Filter capacity 5 microns Equipped with lighting Yes Ljdpoi A Iuusfx Adterk Overall dimensions 1800 x 1515 x 2070 h mm Net weight 245 kg Packaging dimensions 1340 x 970 x 1090 h mm

Condition: excellent (used), Year of construction: 2005, Mawera FSB 700 – Fully automatic biomass boiler with moving grate (wood chips), year of manufacture 2005, for sale. The fuel feed is hydraulic, not by screw conveyor. Ledpfx Adjya Ngxetsrk Components: Boiler body, combustion chamber and heat exchanger, complete hydraulic feed unit, flue gas fan, multi-cyclone, ash separator, chimney piping, control system, electrical control cabinet, operating manual. The system can be inspected in operation on site. Dismantling is possible after the heating season. Condition: Excellent Manufacturer: Mawera Model: FSB 700 Year: 2005 Video available via Whatsapp

Condition: used, Year of construction: 2015, Used Buchi model B-290 glass mini spray dryer. Unit rated 1 kg/hour water evaporation capacity at 220°C maximum air inlet temperature. Heating capacity is 2300 W. Drying tower has inner diameter approximately 150 mm x 485 mm height of straight side. Includes nozzle, seperation flask, cyclone, filter. Lrodpfx Adex R Talstek

Condition: used, Year of construction: 2000, Granulator / Knife Mill Manufacturer: Tria (Italy) Type: 80/45 Main motor: 55 kW Rotor length: 800 mm Lsdpfxsx Exuke Adterk Rotor diameter: 490 mm + Blower + Big-bag station with cyclone

Condition: used, Year of construction: 2000, Granulator / Knife Mill Manufacturer: Tria (Italy) Type: 80/45 Main motor: 55 kW Ljdpox Ext Tsfx Adtork Rotor length: 800 mm Rotor diameter: 490 mm + Blower + Big-bag station with cyclone

Year of construction: 2000, condition: used, Granulator / Knife Mill Manufacturer: Tria (Italy) Type: 80/45 Main motor: 55 kW Rotor length: 800 mm Rotor diameter: 490 mm Lrodpfx Asx Extmsdtok + Blower + Big-bag station with cyclone

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 13,528 h, load capacity: 7,000 kg, lifting height: 3,800 mm, load center: 600 mm, fuel type: diesel, mast type: other, construction height: 2,980 mm, power: 80 kW (108.77 HP), motor manufacturer: Deutz, gearing type: automatic, battery voltage: 12 V, fork carriage width: 2,480 mm, fork length: 1,380 mm, fork width: 150 mm, overall weight: 11,370 kg, empty load weight: 11,370 kg, total height: 2,980 mm, color: yellow, fuel: diesel, Equipment: additional headlights, cabin, front guard, head guard, lighting, pallet forks, sideshift, trailer coupling, STILL RX 70-70, 7t 4-wheel diesel forklift from year of manufacture 2014 with a rated load capacity of 7,000 kg. Equipped with a full free-view telescopic mast offering a lift height of 3,800 mm. Features include a sideshift with integrated fork positioner. Hydraulic system is leak-free, service has been performed! All maintenance work carried out by an authorized dealer! The forklift is in very good condition, and UVV safety inspection can be provided upon request. Technical data: Manufacturer: STILL Model: RX 70-70 Year: 2014 Capacity: 7,000 kg Operating hours: 13,528 Overall height: 2,980 mm Fork length: 1,380 mm Lift height: 3,800 mm Mast: full free-view telescopic mast Diesel particulate filter, cyclone separator Cabin open on the sides, overhead guard (good visibility), rear window Grammer seat 2-pedal control 4-wheel, twin tyres at the front Additional hydraulics 1 + 2 Fork positioner with sideshift (fork spread up to 2,480 mm outside edge, container-compatible) Work lights front and rear Ignition lock Windscreen wiper Reversing camera Transport possible. VAT can be shown separately. Net export possible with a valid EU VAT ID number or for exports outside the EU. Ljdpfxoxvq Uhe Adtjrk

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Lredpfxswa Ax As Adtek

Condition: used, functionality: fully functional, - Manufacturer: Dřevo Trust a.s., Loučná nad Desnou - Height: approx. 18 m - Clearance height: 4.8 m - Volume: approx. 140 m³ - Shell height: 9 m - Shell diameter: 4.5 m Lrodpfx Adjxa Eu Retok - Discharge motor power: 15 kW - The silo was subsequently equipped with a particulate separator (cyclone)

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers • Final purification and classification of rubber granulate This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder o steel o textile fibers • Optional low-noise and low-dust engineering packages available The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process. Lodox Aidbjpfx Adterk

Year of construction: 2011, condition: repair required (used), functionality: unexamined, For sale: GRANPAL S 015 Furnace Serial No.: 015, Furnace output: 4 MW, Number of partitions: 3, Max operating temperature: 1050 °C, Total weight of complete boiler: approx. 24 t, Transport weight of boiler: approx. 12 t (main element) Year of manufacture: 2011 The furnace has been unused for an extended period and requires refurbishment. The unit has been dismantled and prepared for transport. The refractory lining has been removed and is about 90-95% packed and secured on pallets. Lrsdpfswxaazsx Adtjk Price of the furnace in current condition: 50,000 Euro. Refurbishment of the furnace according to manufacturer’s technology is possible. Refurbishment costs depend on the scope of work and may range from 20,000 to 70,000 Euro. Together with the furnace, a biomass feeder and cyclone (shown in the photos) are included in the sale. The furnace can be inspected in: Sępólno Krajeńskie, Kujawsko-Pomorskie, Poland.

Condition: new, Cyclone Dust, Chip, and Sawdust Extractor Separator CORMAK DC3300 3kW Lredpfsyaqvnsx Adtek The DC3300 model from CORMAK is a high-performance and robust cyclone dust extractor, designed for efficient air purification in woodworking shops, furniture manufacturing plants, and metal processing facilities. With a cyclone separator, powerful radial fan, and advanced filtration system, the unit ensures effective separation of dust fractions and maintains consistently high operating efficiency over prolonged use.

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Ledpfeuk Ehxex Adtjrk

Condition: good (used), Year of construction: 2005, functionality: limited functionality, machine/vehicle number: M9405, color: green, - internal diameter of cyclone 750mm - sieve size 3000x1600 mm 1 level - indicative sand production 65 cubic meters / h - turbid production 10000 liters / min - Pump motor power 75Kw - Max. sieve motor power 6+6 Kw - use and maintenance manual Lrsdeu Avvxspfx Adtjk

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Lsdpfx Aeim I Rujdtjrk Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,750 kg, total height: 2,000 mm, total length: 1,560 mm, total width: 1,320 mm, We are a company with over 30 years of experience in trading machines for the plastics industry. All offered machines are available from stock, and we can perform tests on your material. The XC series granulators are designed for shredding both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are available. Control cabinets are built with Siemens components. Material trials with customer samples are possible before purchase. For any questions, please contact us via email or the provided phone number. Ljdpfow Inzwex Adtork P&F Wartacz was established in 1990 and today we are the oldest trading company in the plastics processing sector, continuously distributing injection molding machines, granulators, crushers, chillers, conveyor belts, peripheral equipment, and spare parts. Rotor diameter (mm): 500 Rotor width (mm): 720 Motor power (kW): 37 kW Rotor knives (pcs): 27 Fixed knives (pcs): 4 Weight (kg): 2750 The unit can be purchased with extraction and cyclone instead of a drawer. The machine is unused and available immediately, with testing possible before purchase. (Several dozen machines in stock)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,060 kg, total height: 1,790 mm, total length: 1,370 mm, total width: 980 mm, We are a company with over 30 years of experience in trading machinery for the plastics processing industry. All machines offered are available from our stock, and we can perform tests using your material upon request. The XC series granulators are designed for granulating both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are also available. The control cabinet is based on Siemens components. Before purchase, it is possible to carry out material trials on the customer's material. For any questions, please contact us by email or phone. P&F Wartacz was established in 1990 and is currently the oldest trading company in the plastics machinery sector in Poland, continuously supplying injection moulding machines, granulators, crushers, chillers, belt conveyors, peripheral equipment, and spare parts. Rotor width (mm): 480 Motor power (kW): 20 Rotor knives (pcs): 24 Fixed knives (pcs): 2 Weight (kg): 1060 Option to purchase with extraction unit and cyclone instead of drawer. Lrsdpfjxud Nvjx Adtsk Unused machine available immediately from stock, tests before purchase are possible. (Dozens of machines available on stock)