Used Screw Cylinder For Engel Injection Unit for sale (44,203)

Condition: excellent (used), Year of construction: 2018, ENGEL duo 8160H/860W/1700 combi Machine type: ENGEL duo 8160H/860W/1700 combi Year: 2018 Machine version: 2-component machine Injection unit arrangement: H/W arrangement, one above the other, distance 300 mm Clamping force: 17,000 kN Min./max. mould height: 800 / 1,600 mm Max. opening stroke: 2,550 mm Max. platen distance: 3,350 mm Rotary table diameter: 2,250 mm Mould weight: DS: 30,000 kg AS with rotary table: 21,590 kg Total: 36,586 kg AS without rotary table: 25,790 kg Rotary table weight: 4,200 kg Injection unit 1 / 3660H Nozzle: hydraulic shut-off nozzle Nozzle radius: R35 Nozzle bore: Ø8 mm Screw diameter: 105 mm Max. stroke volume: 4,070 cm³ Max. shot weight PC-ABS: 4,600 g Max. shot weight PP: 3,700 g Max. shot weight PA6 GF30: 5,500 g Max. shot weight TPU: 4,960 g Injection unit 2 / 500W Nozzle: open nozzle Nozzle radius: R35 Nozzle bore: Ø4 mm Screw diameter: 50 mm Max. stroke volume: 432 cm³ Max. shot weight TPV 55 Shore: 390 g Max. shot weight EPDM 65 Shore: 483 g Tie bars / platens Tie-bar spacing horizontal: 1,850 mm Tie-bar spacing vertical: 1,415 mm Tie-bar diameter: 265 mm Centring rings Nozzle side: 1K Ø250 mm / 2K Ø200 mm, pitch 300 mm Ejector side: Ø250 mm Centring groove DS: 300 mm below nozzle centre, 100 × 32H8, depth 18 mm Ejector Max. ejector stroke: 300 mm Central ejector: without Thread: M20 Ejector rod diameter: Ø50 mm Limit monitoring connector: 4-pin Core pullers AS: 4× + 1× proportional valve DS: 4× + 1× proportional valve Core in: SKM13IR3 / alternative SKM10IR2 Core out: SKS13IR3 / alternative SKS10IR2 Limit monitoring connector: 16-pin according to Euromap 13 Valve gate control Hydraulic: 16-fold / SKM10IR2 / SKS10IR2 Pneumatic valves Ejector side: 1× blow function Nozzle side: 1× blow function Mould temperature control Ejector side: 16 circuits Nozzle side: 16 circuits Machine-side water connection: Hasco N9 Tool-side water connection: USA system DME N9 / alternative N6 Mould heating 64 control zones 8 plugs for sensors and heating 16-pin Robot / handling Robot: ENGEL viper 60-RC 300 Travel Z: 3,320 mm Travel X: 1,500 mm Travel Y: 2,600 mm C-axis: 210 Nm B-axis: 210 Nm Automation Conveyor belt for parts deposit Belt width: 1,600 mm Light barrier Special features iQ weight control Gas-assisted processing / blowing agent processing Injection compression moulding Cavity pressure sensors MuCell prepared, not yet installed Electrical data Main connection A: 3×400V + N + PE / 50 Hz Nominal current A: 0 A Rating A: 250 kW Main fuse A: 630 A Short circuit current rating: 10,000 A Control voltage: 230V AC / 24V DC Main connection B: Nominal current B: 210 A Rating B: 150 kW Main fuse B: 250 A Isdpfx Aozatkheixoaw

Condition: good (used), Year of construction: 1999, screw diameter: 30 mm, Engel injection molding cylinder Nozzle diameter 30mm Aggregate 200 Iaedpfx Aozfq Iasixjw Year of manufacture 1999

Condition: good (used), Year of construction: 2001, screw diameter: 35 mm, Engel injection molding cylinder Iajdpfjzfq H Aox Aixjw Screw diameter 35 Unit 330 Year of manufacture 2021

Condition: good (used), Year of construction: 2000, screw diameter: 45 mm, Engel injection molding cylinder Unit 500 Iedszfq Hiopfx Aixsaw Screw diameter 45 mm Quantity: 2 pieces

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Iodex D Dkxepfx Aixsaw Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2018, Serial No. 221921, Control unit by Engel, Type CC300, Clamping force 1,700 t, 2 injection units, rotary table, minimum/maximum mold height 800 - 1,600 mm, platen distance 3,350 mm, clear horizontal/vertical opening 1,850 / 1,415 mm, 16 cascade controllers, 64 hot runner zones, core pulls hydraulic 4 (moving side) / 4 (fixed side), screw diameter 105 / 50 mm, injection weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control by Oni, Type Rhytemper FlexControl 32, 4x 8-circuit block modules 125 °C, 6-circuit block module 125 °C, visualization unit, extraction handling by Engel, Type Viper 60, 5 axes (X,Y,Z,C,B-Axis), nozzle spacing 300 mm, year of manufacture 2018, Serial No. 221938, part enclosure, outfeed conveyor, mobile conveyor by Engel, Type BGR FB100 KMAT, year of manufacture 2018, Serial No. 2144098, L approx. 4,200 mm, W 1,000 mm, external temperature control unit and material dosing not included in this offer. Damage: Hydraulic hoses leaking. Iedpfx Aijy I R Tqsxsaw

Condition: excellent (used), Year of construction: 2010, operating hours: 20,656 h, functionality: fully functional, machine/vehicle number: 174620, clamping force: 260 kN, The machine comes from toolmaking and was only used for sampling. This is why it has low operating hours and is in very good condition. Please check the documents; the order confirmation is included there. Ijdpfx Aijxfgfzoxsaw

Condition: ready for operation (used), Year of construction: 2005, operating hours: 62,235 h, functionality: fully functional, overall weight: 25,100 kg, The ENGEL Victory 2050/350 is a tie-barless injection molding machine manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tons, and the screw diameter is 70 mm. Technical data at a glance: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Tool mounting height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: Isdpfszmmlwjx Aixoaw - MORETTO Hopper Loader R10 C52 dosing unit - ENGEL ERC linear handling system - Longitudinal design - Parts removal cell with machine enclosure - Separator carton feed - Two-stage roller conveyor The tie-barless design of the ENGEL Victory series allows free access to the tooling area, which enables the use of larger tools on smaller machines and thus increases efficiency. This design also offers advantages in automation, as robots and peripheral devices can be more easily integrated. The machine is equipped with the ENGEL control system, which is known for its intuitive operation and precise process control. The servo-hydraulic technology ensures energy-efficient operation and reduces the cooling water requirement. In addition, the machine has a dosing unit from MORETTO and a linear handling system from ENGEL, which supports production automation and increases overall productivity. With a total of 62,235 operating hours, the machine is in used but functional condition.

Condition: ready for operation (used), The conveyor belt of the company Engel is for sale Length : 3000mm Useful width : 400mm Höhenverstellbar: 1000mm-1250mm Iodpfsm E I Rlex Aixsaw 2 swivel castors with brake 2 locking casters

Condition: ready for operation (used), Year of construction: 2003, clamping force: 8,000 kN, screw diameter: 90 mm, total width: 3,000 mm, total height: 2,500 mm, overall weight: 44,000 kg, product length (max.): 8,900 mm, Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details. Iaodpjy Alwmsfx Aixow • Shot volume: ~2700 cm³ • Max. injection pressure: ~1900 bar • Plasticizing capacity: ~77 g/s • Clamping unit: Two-platen design (no traditional toggle), larger mold space for easier changes, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticizing; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g., bumpers, dashboard elements), large housings and covers, industrial parts, thick-walled technical components • Advantages: High clamping force for large parts, more compact than traditional tie-bar machines, stable industrial design, easy to automate Additional equipment • Not specified/included in the provided information

Condition: good (used), Year of construction: 1991, For sale: control boards for EC88/CC90 controllers, removed from operational Engel injection molding machines. Price for all: 1000 EUR It is possible to purchase individual boards. PRICE REDUCED FROM 1000 TO 800 EUR!!! Ijdpfxexfzb Rs Aixoaw

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Iasdezb Ivhspfx Aixsw Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: good (used), Year of construction: 2007, Technical Specifications General Information 1. Manufacturer: ENGEL 2. Model: DUO 7050 / 1000 3. Control Unit: CC200 4. Year of Manufacture: 2007 5. Operating Hours: 100,145 h Clamping Unit 1. Clamping Force: 10,000 kN (1,000 tons) 2. Tie Bar Distance (H × V): 1,400 × 1,150 mm 3. Platen Size (H × V): 1,850 × 1,810 mm 4. Mould Height (Min./Max.): 578 – 1,678 mm 5. Opening Stroke: 2,100 mm 6. Daylight (EBH): 1,000 mm 7. Centering (Fixed / Moving Platen): Ø250 mm Clamping Unit Equipment Iasdpjy Ukfmsfx Aixsw 1. Core Pulls: 2. Fixed Platen: 3 3. Moving Platen: 3 4. Air Valves: 5. Fixed Platen: 1 6. Moving Platen: 1 7. Magnetic Mould Clamping System: Yes Maximum Mould Weight 1. Maximum Total Mould Weight: 21,000 kg 2. Maximum Mould Weight on Moving Platen: 14,000 kg Injection Unit 1. Screw Diameter: 105 mm 2. Shot Volume: 4,160 cm³ 3. Maximum Specific Injection Pressure: 2,090 bar 4. Plasticizing Capacity (PS): 112 g/s 5. Maximum Screw Speed: 150 rpm 6. Screw Drive: Electric 7. Screw Surface: Armoured and nitrided 8. Barrel: Bimetallic M3 Nozzle 1. Nozzle Orifice Diameter: 8.0 mm 2. Nozzle Radius: R35 mm 3. Nozzle Immersion Depth: 50 mm 4. Maximum Outside Nozzle Diameter: 60 mm KUKA ROBOT 6 axes

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, Clamping force: 450 t Screw diameter: 55 mm / 35 mm Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Shot volume: 295 cm3 Iaodpey Ufd Rsfx Aixsw Type: Multicomponent Drive: Hydraulic \+ robot Wittmann \+ rotary table

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Iaodpfxsb Umtko Aixsw

Condition: used, functionality: fully functional, With this offer, you are purchasing a used accessory, the ‘Ricoh RB5020 ring binder’. Item for sale: Isdpfjxzqhfox Aixsaw 1 x Ricoh RB5020 suitable for the following models: Ricoh Pro C7200 series Ricoh Pro 8200 series Ricoh Pro C9200 series Please check in advance whether this accessory is suitable for your machine. Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test binding can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible. Iaedpsy N Uwcefx Aixsw

Condition: good (used), Year of construction: 2008, operating hours: 59,934 h, screw diameter: 45 mm, displacement volume: 318 cm³, ENGEL Victory 650-120 Tech Stock No.: 503240 Manufacturer: ENGEL Model: VICTORY 650-120 Tech Control: EC200 A02 Year of manufacture: 2008 Operating hours: 59,934 h Technical Data Clamping Unit Clamping force: 1200 kN Platen size (H x V): 740 x 680 mm Minimum mold height: 300 mm Maximum daylight: 800 mm Opening stroke: 507 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Tool weight: 825 kg Technical Data Injection Unit Screw diameter: 45 mm Shot volume: 318 ccm Injection pressure: 1525 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 290 min⁻¹ Iaodpfjytfn Eex Aixow Free shot weight (PS): 220 g/s Number of heating zones: 5 Nozzle stroke: 300 mm Dimensions & Weight Machine dimensions (L x W x H): 4.86m x 1.5m x 2.1m Total weight: 7,600 kg Equipment - Display language: German - CEE socket 16A - Hydraulic core pull, 2x - Air valve, 2x - Machine with water battery - Machine without material hopper - Levelling elements - Schuko socket 10A - Tool heating, 8x

Condition: good (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock no.: 503558 Manufacturer: ENGEL Model: Victory 330-120 Tech Control system: CC100 Year of manufacture: 2007 Operating hours: 68,651 h Technical Data – Clamping Unit Clamping force: 1,200 kN Platen size (H x V): 740 x 680 mm Minimum mould height: 300 mm Maximum daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 825 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 1,600 bar Screw L/D ratio: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Iaodpfx Aieytfgnoxow Dimensions & Weight Machine dimensions (L x W x H): 4.5 m x 2.1 m x 2.1 m Total weight: 7,300 kg Equipment Screen text in German CEE socket 16A Hydraulic core pull, 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Levelling elements Interface for ejector plate safety Schuko socket 10A Technical Data – Handling Machine type: Linear Brand: ENGEL Control system: ER-HLI41VC Year of manufacture: 2007

Condition: good (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 22 mm, displacement volume: 38 cm³, ENGEL VICTORY 80-90 tech Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of manufacture: 2009 Operating hours: 70,171 h Technical Data – Clamping Unit Clamping force: 900 kN Platen size (HxV): 740 x 680 mm Minimum mould height: 300 mm Max platen daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 38 ccm Injection pressure: 2,060 bar Screw L/D ratio: 19 l/d Screw stroke: 100 mm Screw speed: 360 min⁻¹ Free flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions (LxWxH): 4.4 m x 1.5 m x 2 m Total weight: 6,700 kg Equipment Iodpfx Aijytfccoxsaw Display language: German CEE socket 16A 1x hydraulic core pull 2x air valves Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A 4x mould heating circuits

Condition: excellent (used), Year of construction: 2004, operating hours: 98,108 h, clamping force: 1,500 kN, screw diameter: 50 mm, injection weight: 354 g, Engel Victory 750/150 Tech injection molding machine (146) Number: 146 Availability: in stock Year of production: 2004 Producer: Engel Injection molding machine condition: used Screw diameter [mm]: 50 Injection weight [g]: 354 Injection pressure [bar]: Iedpfxey Ec D Ns Aixjaw 1427, 2500 Closing force [kN]: 1500 Column spacing [mm]: without columns Plate size [mm]: 750 x 850 Control type: CC 200 Tongue: german Installed power [kW]: 61 Working hours [h]: 98108 Weight [kg]: 9500 Dimensions [mm]: 5700 x 2000 Feed hopper: NO Core string: Yes Robot socket: Yes

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: Ijdpfx Aszcaxdeixjaw TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Iodpfx Aswzyg Hjixjaw

Condition: like new (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 220 cm³, Technical Data - Clamping Unit Clamping force: 1600 kN Tie bar spacing (h x v): 520 x 520 mm Platen size (h x v): 760 x 760 mm Minimum mould height: 250 mm Maximum mould height: 600 mm Maximum daylight: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Iasdpjyk T I Ujfx Aixsw Mould weight: 1250 kg Technical Data - Injection Unit Screw diameter: 40 mm Shot volume: 220 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 175 mm Screw speed: 420 rpm Plasticising rate (PS): 33 g/s Free shot weight (PS): 224 g/s Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions (L x W x H): 5.9 m x 1.7 m x 2.2 m Total weight: 8,400 kg Equipment Display language: German Hydraulic core pull, 1x Core pull unit, hydraulic Machine without material loader Needle shut-off nozzle, pneumatically actuated EUROMAP 63 interface

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Iaodpfxjyuayre Aixsw