Used Servo Converter for sale (6,115)

Condition: as good as new (ex-display), functionality: unexamined, power: 37 kW (50.31 HP), Siemens SIMOVERT MASTERDRIVES VC Frequency Converter – 37 kW – 6SE7027-2ED61-Z – PROFIBUS Unused Siemens SIMOVERT MASTERDRIVES Vector Control frequency converter from surplus stock, supplied in its original box. Technical specifications: Manufacturer: Siemens Product range: SIMOVERT MASTERDRIVES VC Part number: 6SE7027-2ED61-Z Rated power: 37 kW Rated output current: 72 A Input voltage: 3-phase 380–480 V AC Input frequency: 50/60 Hz Iedpfxozpwb Uo Ad Istl Output voltage: 3-phase 0–480 V AC Output frequency: 0–500 Hz Enclosure: IP20 Option G93: CBP2 PROFIBUS communication module Serial number: T-S91647500040 Revision: C Country of origin: Germany

Condition: new, components: 4 x clear glass panel L=418 B=568 S=6 2 x clear glass panel 3 x opal glass panel 1 x SEW Eurodrive SA47 AH90 1 x Continental STD 672 58M + belt gear 2 x CEDS Duradrive DAPE-0410.04400.00 1 x lamp unit 1 x computing unit 1 x Seiffert Systems Linatronic cooling unit incl. montage kit 4 x sawtooth belt 25 HTD 48M 2352 1 x 8 pole cable M12 plug + shielding 1 x system bus cirquit board 1 x valve control unit 8 x camera head Linatronic 2 x toothed belt HTD 1760 8M 30 Z=220 1 x protective glass for lamp unit 2 x protective glass panel 1 x frame seal 2 x frame seal 2 x frame seal 4 x Adjustable flow station 1 x Hirschmann RS20 Rail Switch 3 x Linatronic control computer 1 x Siemens Simatic Net CP AS-Interface + replacement PCB 1 x Siemens Sitop modular 40A 1/2 pn 1 x ground lens Iodpfxehw E Rqj Ad Istl 1 x White LED ring light 1 x cylinder valve unit 1 x replacement magnetic valve for cylinder valve unit 1 x small controller unit 1 x DC/DC converter 1 x DC/DC converter 1 x Input/Output module 1 x safety relais 1 x IFM elecronics distributor module AC2500 2 x relais 3sec 24v type b 1 x oil seal ring 1 x tensioner pulley 36 x pressure spring 1 x Futaba mini servo S3107 4 x ball bearing cx 16007-2RSLG622 3 x gas spring 2 x ring brush 2 x toothed belt HTD 10T 5x1380mm 2 x Festo CPV10-GE-ASI-4E4A-M8 1 x LED lamp contour RGB 1 x LED lamp wall 2 x roller guide 1 x ZAE gearbox 90-1094-14-1a i=14,5:1 Individual and partial purchases are also possible. We will be happy to send you further information on the components on request.

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Iedpfx Adoz Acyie Ietl

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Itsdpfoylpvdex Ad Iel Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg !! Available for immediate sale !!

Condition: used, Year of construction: 1992, spindle speed (min.): 7,500 rpm, spindle speed (max.): 24,000 rpm, 4 Motor grinding spindles (liquid-cooled, with forced air/oil mist lubrication) and REFU HF converter 316/25 Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032, 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF converter High-frequency converter (inverter, frequency converter) 316/25 Frequency converter/inverter for supplying the motor spindles GMN tool spindle motor grinding spindle The spindles are fully functional, without warranty – manufactured approx. 1992 A collection of various grinding spindle shafts/arbors for grinding wheels is available for these grinding spindles and can be purchased separately. e.g. for supplying the spindles of a Voumard grinding machine 400 CNC T4. Grinding spindle insert BM-15-170 Length 135 Spindle Ø130 Wheel Ø 188 M36 18-150 L 90-Ø120 Wheel Ø149M16 15-170 L125-Ø90 Wheel Ø148M36 15-170 L 120-Ø50 Wheel Ø198M36 24-150 L 128-Ø50 Wheel Ø88M10 18-150 L 195-Ø80 Wheel Ø136M36 24-150 L 70-Ø33 Wheel Ø48M10 24-150 L 120-Ø120 Wheel ØM14CBN 24-150 L 94-Ø50 Wheel Ø90M10CBN TSSV-170 L 125-Ø82 Wheel Ø125M36 170 L 125-Ø52 Wheel Ø79M36 170 L 185-Ø80 Wheel Ø96M36 170 L 105-Ø80 Wheel Ø86M36 170 L 148-Ø40 Wheel Ø84M36 170 L 165-Ø50 Wheel Ø70M36 24-150 L 65-Ø36 Wheel Ø66 CBNM10 15-170 L 95-Ø80 Wheel Ø100M36 24-150 L60-Ø40 Wheel Ø60M10 M15-170 L 155-Ø58 Wheel Ø120M36 Grinding mandrel TSSV -170 L 75 - Ø20M36 TSSV-170 L 230-Ø30M36 TSSV-170 L 144-Ø35 Wheel Ø37M14 BM18-150 L 132-Ø27 Wheel Ø29M14 TSSV-170 L 159-Ø20 Wheel Ø24M36 BM18-150 L 225-Ø20 Wheel Ø40M14 TSSV-170 L 158-Ø17 Wheel Ø18M36 TSSV-170 L 216-Ø30 Wheel Ø32M36 TSSV-170 L 140-Ø50 Wheel Ø52M36 TSSV-170 L 220-Ø23 Wheel Ø27M36 TSSV-170 L 230-Ø37 Wheel Ø38M36 BM15-170 L 195-Ø58 Wheel Ø72M36 BM15-170 L 270-Ø58 Wheel Ø74M36 TSSV-170 L 300-Ø45 Wheel Ø45M36 TSSV-170 L 245-Ø50 Wheel Ø75 CBNM36 TSSV-170 L 226-Ø42 Wheel Ø27M36 TSSV-170 L 235-Ø30 Wheel Ø36 CBNM36 TSSV-170 L 220-Ø48 Wheel Ø49M36 BM24-150 L 170-Ø35 Wheel Ø35M14 TSSV-170 L 197-Ø25 Wheel Ø38M36 BM18 -150 L195-Ø45 Wheel Ø66 CBNM14 BM24-150 L 156-Ø20 Wheel Ø23M14 BM24-150 L 194-Ø25 Wheel Ø38CBNM14 BM24-150 L 120-Ø25 Wheel Ø35CBNM14 TSSV-170 L 20-Ø20 Wheel Ø34M36 BM24-150 L 116-Ø20 Wheel Ø45M10 BM24-150 L 110-Ø26 Wheel Ø34M14 BM24-150 L 85-Ø25 Wheel Ø61CBNM14 BM24-150 L 10-Ø40 Wheel Ø30M14 Itsdpfol Tn Afsx Ad Iel BM24-150 L 75-Ø16 Wheel Ø19M14 TSSV-170 L 157-Ø40 Wheel ØM36 BM24-150 L 176-Ø45 Wheel Ø65 CBNM14 Grinding spindle insert BM 24-150 Length 40–Ø 40 Wheel Ø60M10 BM18-150 L 40-Ø37 Wheel Ø100 CBN M18 TSSV-170 L 15 -Ø40 Wheel Ø58M16 BM24-150 L 30-Ø18 Wheel Ø18M14 150 L 29-Ø20 Wheel Ø20M14 150 L 50-Ø20 Wheel Ø34M10 150 L 50-Ø40 Wheel Ø41M14 BM18-150 L 10-Ø40 Wheel Ø55M16 BM24-150 L 10-Ø26 Wheel Ø32M16 150 L 10-Ø25 Wheel Ø60M16 150 L 52-Ø13 Wheel ØM14 150 L 92-Ø26 Wheel Ø37M14 15 L 10-Ø40 Wheel Ø50M16 150 L 80-Ø47 Wheel Ø66CBN M14 150 L 85-Ø12 Wheel Ø15M14 150 L 10-Ø42 Wheel Ø50M16 150 L 25-Ø25 Wheel Ø25M14 150 L 30-Ø26 Wheel Ø41M14 150 L 100-Ø10 Wheel Ø25CBNM14 150 L 43-Ø20 Wheel Ø30CBNM14 150 L 54-Ø13 Wheel Ø47M14 150 L 63 Ø35 Wheel Ø48CBN M14 150 L 40-Ø40 Wheel ØM10 150 L 30-Ø20 Wheel Ø35M14 150 L 45-Ø20 Wheel Ø24M14 150 L 17-Ø25 Wheel Ø60M16 150 L 55-Ø19 Wheel Ø30CBNM14 150 L 25-Ø25 Wheel Ø38CBNM14 Price / Details on request. All technical specifications are subject to errors and omissions. We only sell to countries within the European Co

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, Lenze Bachhofen AG, drive technology Isdpfxezxbh Do Ad Ietl TYPE: MDFQABS100-22 100 Hz 20.6 kW 2930 rpm Completely overhauled in 2023 See images.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Itsdpopvlf Sefx Ad Iel Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: new, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 68 kW Iedpex S Dwqefx Ad Ijtl Standard configuration Machine configuration:3 station variants:1st station: Sanding belt2nd station: Brush elements3rd station: Sanding belt Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Machine with wet vacuum cleaner Extended machine accessories

Condition: used, Year of construction: 1973, machine/vehicle number: 2007, Short description: - Including splicing table - Machine documentation available Last intended use (Jan. 2024): - Application-based product testing of polyester slitting converter cable assortments - For assessing running characteristics under constant machine settings - 1.9-6.7 dtex - 2x80ktex-2x120ktex - Collection in can - Accessories/spare parts partially available Ijdpfx Adow Rlnae Iotl The machine has been dismantled and stored, but can be inspected on site. Collection only in 14727 Premnitz by the buyer, no shipping. If interested, we look forward to your offer. Enquiries in writing only, please.

Condition: good (used), Year of construction: 2021, Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D90N4 -Power: 90 kW Itedpfxexlzibo Ad Iel -Input: 380-480V / 50/60Hz / 156 A -Output: 380-480V / 0-500 Hz / 173 A -Number: 1 frequency converters available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 55 kg/piece

Condition: excellent (used), Ifsys Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper Itjdszd Rk Espfx Ad Isl 1 x return conveyor belt 2 x control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Itsdpfxezbg Ezs Ad Isl Net power of hydraulic pump engine [kW]: 26

Condition: used, mileage: 33,153 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, In good condition and fully functional, with no pending repairs. +++ Vehicle is ready to drive ++ Power steering ++ 7.5 tons possible with an H-certificate +++ Recent inspection including brake fluid change, lubrication, and fuel filter replacement. In addition, the air dryer cartridge and windshield wipers will be replaced. Both starter batteries have been renewed, and the fluid levels of all components have been checked and topped up if necessary. The windshield washer system will be upgraded to an electric pump with a push-button. The exhaust system will be overhauled, with the last pipe being replaced. This 1113 runs very well and is ready to drive without any issues. 9 seats (6 seats possible with private registration as a truck), All-wheel drive 4x4, central and rear differential locks, trailer hitch with ring eye 1.5t Itodozmqncepfx Ad Iel Transfer case with off-road reduction and differential locks, Walk-in equipment box with equipment holders, Wheelbase 4200 mm +++ Maximum speed according to documents = 85 km/h, actual speed with GPS 88 km/h Interior cabin dimensions from behind the driver's seat LxWxH in mm: 1560 x 2180 x 1460 Exterior box dimensions LxWxH in mm: 3130 x 2400 x 1500 Interior box dimensions LxWxH in mm: 3050 x 2400 x 1450 GVWR is 9.0t - Changes, prior sales, and errors excepted - ?080?

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm Iedpfx Aozux Tped Ietl - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Manufacturer: ABB, frequency converter type ACS101-K25-1 -Operator panel: ABB ACS100-PAN -Input: 200-240 VAC 50 / 60Hz -Output: 0 ... 300 Hz 1.4A -Dimension box: 200/180 / H100 mm Itsdjhbiwqepfx Ad Ijl -Weight: 1 kg

Condition: like new (used), Year of construction: 2011, MBO F 530 flat-pile feeder Bograma BSR 550 Iodpfxezl Hlbe Ad Istl UEB 550 breakout station 850 transfer unit 701 shingle delivery system, extended version

Condition: ready for operation (used), Sanyo Denki AC servo motor with F681024F06 / 09907 optical shaft encoder – presumed motor model: 20BM121FXPR1, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedpfx Adez Ddtqj Ijtl

Condition: used, mileage: 37,850 km, power: 77 kW (104.69 HP), first registration: 02/1993, fuel type: gasoline, overall weight: 5,500 kg, color: red, gearing type: mechanical, number of seats: 6, Mercedes 510, double-cab pickup, 6 seats Ijdpfx Aszng Tded Iotl !!! Gasoline engine !!! 5-speed manual transmission, power steering.

Condition: good (used), Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Phoenix Contact Power supply Quint Power -Type: QUINT4-PS/1AC/24DC/20 Isdjxpf Dkspfx Ad Iotl -Order No.: 2904602 -Input: 100-240V AC -Output: DC 24V 20A -Number: 16x power supply available -Price: per piece -Dimensions: 130/70/H130 mm -Weight: 1.4 kg/pcs

Condition: excellent (used), ALKO 200 clean air extraction unit with frequency converter – used Air filtration using filter hoses, Pneumatic cleaning system, Dust-tested, Movable collection container, Frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Extraction nozzle diameter: 200 mm, Nominal volume flow: 2,261 m³/h, Max. negative pressure: 2,446 Pa, Number of filter bags: 2, Motor: 4 kW, Compressed air connection: Max. 8.5 bar, Dimensions (L x W x H): 2,280 x 1,010 x 2,050 mm, Isdpfx Adszg A N Ee Ietl Weight: 470 kg Quality information: - Complete basic inspection - Complete basic cleaning - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2007, functionality: fully functional, Universa 500 Servo with Kallfass Compact Tunnel Year of manufacture: 2007 The machine will be cleaned and overhauled prior to delivery. Installation and training in Western Europe and parts of Eastern Europe are included in the purchase price. The Universa 500 Servo is a film packaging machine with a continuous motion sealing bar. The output is specified as up to 100 cycles per minute, depending on the type of film and product. The sealing bar has a width of 550 mm. The maximum product height is 200 mm. Packaging performance depending on product and film: 100 cycles/min Length of cross sealing bar: 550 mm Max. passage height of sealing bar: 200 mm Min. product length: 80 mm Film: centre-folded film, approx. 12 - 80 µm Film roll holder: arranged at floor level for easy loading Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Conveyor speed: variable 10 - 40 m/min Sealing system: continuously heated sealing bar with replaceable sealing strip, temperature control and monitoring PLC user interface: Touch panel, SIEMENS TP 270 Programmable logic controller: SIMOTION® by SIEMENS® Film and product transport via vacuum conveyor to the continuous motion cross sealing unit Replaceable sealing strip; available in different profile shapes for optimal sealing seam quality depending on product and film Position-controlled product flow. No tedious readjustment of timing values required when changing formats or speed Power supply: 400 V three-phase, 50 Hz with protective earth, without cable and plug Rated power: 5 kVA Rated current (at 400 V): 7.3 A Available languages: German, English, French Iedpfsy Nx Dgox Ad Istl

Condition: excellent (used), Year of construction: 2014, - Accessories included. - Control system: WEILER C3 based on Siemens SINUMERIK 840D WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm TURRET Turret head DIN 55027/DIN ISO 702-3, size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60%/100% ED 9/7 kW Speed range 1 – 4,500 rpm Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Transverse 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force transverse 3,000 N Max. rapid traverse speed longitudinal/transverse 6/3 m/min THREAD CUTTING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 threads/inch TAILSTOCK Tailstock spindle diameter 50 mm Tailstock quill stroke 110 mm Internal taper DIN 228 MK 3 mm Itjdpfjztxq Eox Ad Iol

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-250-21-1457, functionality: fully functional, operating hours: 602 h, power: 2.3 kW (3.13 HP), workpiece length (max.): 200 mm, workpiece width (max.): 70 mm, workpiece height (max.): 850 mm, workpiece weight (max.): 35 kg, total height: 1,895 mm, total length: 2,920 mm, total width: 1,538 mm, overall weight: 1,450 kg, table length: 3,050 mm, Equipment: CE marking, documentation/manual, Offering for sale a Weeke Optimat BHX 055, a CNC-controlled vertical machining center. The reason for the sale is a restructuring of production. Year of manufacture: 2012 Horizontal drilling unit with 4 spindles in the X-direction Horizontal drilling unit with 2 spindles in the Y-direction Notch saw, D=100mm, in the X-direction Milling motor incl. frequency converter, 5 kW Iedpfx Adozy U H Ao Ijtl Workpiece-length-dependent machining in the X-direction Workpiece length: min. 200mm Workpiece length: max. 3050mm Workpiece width: max. 70mm Workpiece width: max. 850mm Workpiece thickness: min. 12mm Workpiece weight: max. 35kg Control program: WoodWOP 6.0 The machine has been in operation since February 8, 2012. During this time, 33,094 parts were machined. Total machine operating time: 602.85 hours. The sale includes the drills and milling cutters. The machine is still connected and can be tested.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: Ijdjzimb Depfx Ad Istl - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-240-48 -Input: 100-240 VAC 2.6 A 50/60 Hz -Output: 48 V / 5 A -Number: 11x power supply units available -Price: per piece -Dimensions: 125/65/H125 mm Itsdpfoxxh Ecjx Ad Iol -Weight: 1 kg/piece