Used Sicar Narrow Bandsaw for sale (1,481)

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Fjdpfx Aljzd Riuj Sspn Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), Year of construction: 2016, lifting height: 38,260 mm, fuel type: diesel, Weights Empty weight: 16.100 kg Fsdpfx Asyvzy Dsl Sjpn Functional Lifting capacity: 600 kg Working height: 4.026 cm Dimensions of cargo space: 974 x 253 x 378 cm Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 3108 m Max swing of platform in degrees: 250 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 400 Year of build: 2016 Condition: Used Data: Max. working height: 40,26 m Max. platform height: 38,26 m Max. reach: 31,08 m Total dimensions LxWxH: 9,74 x 2,53 x 3,78 m Platform dimensions LxW: 2,41 x 0,97 m Max. basket load: 600 kg Swivel range: 250° Ground clearance: 0,22 m Support width both sides: 6,60 m Support width one side: 4,77 m Support width: narrow 2,86 m Support length: 6,37 m Ground pressure: 150 kN Driving license category: C / 2 Empty weight: 16.100 kg Total permissible weight: 18.000 kg Special features: Tilt 2°, Rotatable work basket 2x 90° (hydraulic), Basket arm, Rotation angle 180°, WITHOUT roof protection, Loading area with side panels, Telescopic basket arm allows working over obstacles, Computer-assisted stabilizer automation, PPE attachment points available, Material box 1.81 x 0.81 m. Information: TÜV and UVV new

Condition: good (used), Year of construction: 2014, lifting height: 20,350 mm, fuel type: diesel, Weights Empty weight: 3.260 kg Functional Lifting capacity: 200 kg Working height: 2.235 cm Dimensions of cargo space: 647 x 212 x 300 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1418 m Max swing of platform in degrees: 225 Fsdpfxeyxf Nbo Al Sopn Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2014 Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,18 m Total dimensions LxWxH: 6,47 x 2,12 x 3,00 m Platform dimensions LxW: 1,37 x 0,66 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (front) / 16 kN (back) Ground clearance: 0,16 m Support width vertical: 2,12 m (front) / 2,12 m (back) Support width one side: 2,82 m (front) / 2,73 m (back) Support width both sides: 3,52 m (front) / 3,34 m (back) Support length: 4,15 m wide/ 3,19 m narrow Empty weight: 3.260 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket 2x55°, maximum setup tilt 5°, loading area with side panel 1.05 x 2.13 m. Information: Tüv und UVV new

Condition: used, Year of construction: 2016, lifting height: 24,850 mm, fuel type: diesel, General information Mileage: 63.255 km Weights Empty weight: 3.300 kg Functional Lifting capacity: 230 kg Working height: 2.685 cm Dimensions of cargo space: 684 x 220 x 299 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1625 m Max swing of platform in degrees: 450 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 270.3 Year of build: 2016 Condition: Used Data: Max. working height: 26,85 m Max. platform height: 24,85 m Max. reach: 16,25 m Total dimensions LxWxH: 6,84 x 2,20 x 2,99 m Platform dimensions LxW: 1,37 x 0,68 m Max. basket load: 230 kg Swivel range: 450° Support width both sides: Front: 3.51 m / rear: 3.66 m Support width one side: Front: 2.84 m / rear: 2.94 m Support width: narrow 2.20 m Support length: 4,14 m Support length: narrow 3.12 m Ground clearance: 0,16 m Ground pressure: Front: 31 kN / rear: 21 kN Drive type: Diesel Driving license category: B / 3 Empty weight: 3.300 kg Total permissible weight: 3.500 kg Fpedjy At Duopfx Al Sen Special features: Rotating work basket 2x 85°, socket in the work basket, setup and drive-in automation, on/off switch for the motor in the work basket, grounding possible, memory function, loading area with side panel. Information: TÜV und UVV new Location: 41468 Neuss immediately available

Condition: good (used), Approx. 235 picking carts, Wanzl, 2 sizes – used: Price for partial quantities (2 intermediate shelves per cart): Up to 30 pieces: €195.00 (net) / piece Up to 60 pieces: €185.00 (net) / piece Up to 120 pieces: €175.00 (net) / piece Minimum purchase quantity: 10 pieces Price for complete purchase: €35,000.00 (net) incl. loading! This special price is only valid for collection by week 41/2026! Type: KT3 1297 Type: KT3 1713 Manufacturer: Wanzl Fsdpfx Asz Dwa Rjl Sopn Type: KT3 1297 Year of manufacture: varying, e.g., 2012 / 2018 Load capacity: 300 kg Load capacity per shelf: 50 kg Most of the carts are 1300 mm long. Some of the wider ones are also 1700 mm long. Approx. 185 pieces are all wide (60 cm deep) Approx. 50 pieces are narrow The equipment with intermediate shelves varies (see photos), on average, there should be at least 1–2 intermediate shelves! Few with a foldable step Condition: good Available: immediately Location: Dortmund area, later storage in Frankenberg / Saxony

Condition: good (used), Year of construction: 2021, operating hours: 3,862 h, Empty weight: 4.700 kg Working height: 3.090 cm Dimensions of cargo space: 820 x 127 x 205 cm Technical condition: good Visual appearance: good Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: Ruthmann Type: ST 31 Year of manufacture: 2021 Product type: Used Data: Max. working height: 30.87 m Platform height: 28.87 m Max. reach: 17.52 m Platform load capacity: 400 kg Platform dimensions LxW: 1.38 x 0.77 m Swivel range: 2x 220° / 440° Overall dimensions LxWxH: 8.20 x 1.27 x 2.05 m Support pressure: 32 kN Fedpfxjxc Hn Ro Al Sjpn Ground clearance: 0.14 m Support dimensions: narrow WxL 3.81 x 9.08 m Support dimensions: one side WxL 5.33 x 9.08 m Support dimensions: both sides WxL 6.86 x 6.19 m Drive type: 230V / diesel Dead weight: 4,700 kg Special features: Drive system, white rubber chain, rotating work basket, basket arm, rotation angle +/-90°, high basket load 400 kg. Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Machine type: Bandsaw - Semi-automatic Band dimensions: 3055 x 27 x 0.9 mm Cutting capacity (rectangular): 200 x 350 mm Cutting capacity (round): 260 mm Cutting speed: 18 - 87 m/min Main drive motor power: 1.5 kW Weight: approx. 460 kg Dimensions W x D x H: approx. 1700 x 1200 x 1600 mm Standard accessories: - Infinitely variable cutting speed via control panel with display - Raise/lower via control panel (hydraulic) Fpedpfxox Narls Al Son - Manual vice with quick clamping, adjustable in length - Material stop - Emergency stop on control panel - Brush for band cleaning - Coolant tank: 17 litres - User manual in English Options: - 2 pcs. 2-meter standard roller conveyors without measuring scale - 1 pc. saw band 3,055 x 27 x 0.9 mm Available end of April 2026

Condition: excellent (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm Fsdpfx Aoxtvgkjl Sopn > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 831102, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 480 mm, cutting width (max.): 780 mm, control type: manual, actuation type: manual, rotational speed (max.): 700 rpm, rotational speed (min.): 1,400 rpm, total height: 2,460 mm, total length: 1,490 mm, total width: 900 mm, overall weight: 720 kg, table height: 970 mm, year of last overhaul: 2026, roll diameter: 800 mm, saw blade length: 5,600 mm, Equipment: documentation/manual, motor brake, Dear customers, we currently offer a fully overhauled bandsaw from the HEMA brand. The machine has been repainted in new, current original colors, and the electrical system, including the emergency stop system, is completely new. Mechanical parts were either purchased from the original manufacturer or manufactured in-house. The motor has been completely overhauled. Here are some additional technical specifications of the machine: - Precision roller guide at the top and bottom, upper guide height-adjustable via handwheel, vibration-damping wheel suspension - New aluminum disc wheels with vulcanized and ground rubber linings, dynamically balanced - Stand – LEFT-hand version - With precision table swivel device with handwheel and rack and pinion - Pole-changeable motor with 2 cutting speeds, safety brake, and brake air system - Emergency stop switch with undervoltage release - Aerodynamically optimized extraction port The scope of supply includes a set of saw blades from HEMA and other machine-specific accessories. Price plus VAT, which will be shown separately on the invoice. Fsdoz Eh S Topfx Al Sspn Free and insured shipping throughout Germany! If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Fpodpoxdwbkefx Al Ssn Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: used, mileage: 19,393 km, power: 191 kW (259.69 HP), first registration: 09/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, total width: 2,400 mm, total height: 3,260 mm, Year of construction: 1997, Equipment: ABS, compressor, MAN 15.264 Silent with METZ DLK 23-12 PLC III turntable ladder in immediately operational condition! ----First registration: 26.09.1997 Mileage: 19,393 km Operating hours: 1,170 h Chassis equipment: * Leaf/leaf spring suspension * Wheelbase 4325 mm * Permissible total weight 15 t * 8-speed manual transmission EATON * Fuel tank 127L rear * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length driver's cab * Driver comfort seat with lumbar support - Make: GRAMMER * Front passenger bench, Make: GRAMMER * Exhaust tailpipe for fire department use * Engine brake * Anti-lock braking system (ABS) * Traction control (ASR) * Disc brakes for front axle (new brake discs and pads!) * Armrests on both doors * Heated driver's seat * Additional headlights and fog lights * Operating hour counter * Headrest for driver * 2 headrests for front passenger * Rear cab wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Right side wide-angle mirror, heated * Right side kerb mirror, heated * Reversing camera Turntable ladder superstructure equipment: * Superstructure: Metz turntable ladder DLK 23-12 PLC III with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, rated rescue height: 23m, rated outreach: 12m, stabilizers: horizontal-vertical, stabilizer width adjustable between 2400mm and 4500mm * Complete service booklet available, all maintenance carried out annually * Front blue warning beacons and rear blue lights ----Immediately operational vehicle in well-maintained condition! Non-smoking vehicle - in good condition inside and out! Your contact person for this vehicle: ---- Fpsdpowlxbdsfx Al Sen Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale, and errors!

Condition: used, mileage: 91,498 km, power: 206 kW (280.08 HP), first registration: 12/2006, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro4, total length: 10,000 mm, total width: 2,500 mm, total height: 3,240 mm, Year of construction: 2006, Equipment: ABS, air conditioning, compressor, MAN LE 15.280 with METZ DLK 23-12 L32 CAN aerial ladder, in ready-to-use condition. ----Equipment of the base vehicle: * Air conditioning * Suspension type: leaf spring/leaf spring * Wheelbase 4575 mm * Permissible total weight 15 t * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank 125l, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Medium-length cab * Driver's comfort seat with lumbar support - Manufacturer: GRAMMER * Co-driver's seat Manufacturer: GRAMMER * Exhaust pipe for fire department * Quick-start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional high and low beam headlights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers front and rear axle * Headrests for driver and co-driver * Cab rear wall with 2 narrow windows, left and right Fpodpfxexafw So Al Ssn * Heated and electrically adjustable rearview mirror * Wide-angle mirror, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake * Tire chains on the rear axle * Winter tires Conti Scandinavia Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. swiveling angle: 75 degrees, Max. platform load capacity: 270kg, Nominal rescue height: 23m, Nominal outreach: 12m, Outrigger support: horizontal-vertical, Outrigger width variable between 2,400mm and 4,500mm * 2014.9 operating hours * LED spotlights on the ladder for area lighting * Special warning light system * Front warning lights * Original Martin horn system (4-funnel). * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue litter, load capacity up to 150 kg * Fixed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Fixed water supply in the upper part of the ladder with valve and B-Storz couplings * 3 securing points in the rescue platform for securing the crew * Load ring on the lower ladder, loadable up to 4000kg * Load ring on the boom segment (between ladder tip and rescue platform) for attaching a rappelling device, 270kg/400kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, spare canister, rescue litter, and extension pipe * LED floodlight bar on the lower ladder, approx. 8282 lumens * 2 x adjustable LED spotlights at the end of the lower ladder, 2880 lumens each, operable from the main control panel * LED spotlights left and right on the rescue platform, 1800 lumens each * 2 LED floodlight bars on swivel arms, left and right on the rescue platform, 3105 lumens each (as a replacement for 1000 watt halogen spotlights) * Complete service booklet available, all maintenance performed annually ----Immediately ready-to-use vehicle in well-maintained condition, inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale and errors!

Condition: used, mileage: 58,135 km, power: 62 kW (84.30 HP), first registration: 06/2018, overall weight: 3,500 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 690 kg, empty load weight: 2,810 kg, next inspection (TÜV): 06/2024, wheelbase: 1,600 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, onboard computer, parking sensors, * German vehicle * Available in multiple units * First owner * Condition, see photos * Only 3306 sweeping hours * 2 front rotary brushes, 700mm wide * Extension device * Sweeping width up to 2,300-3,020mm * Overall width 1320mm * Working speed 0-16 km/h * Sweeping debris container 1.8 m³ * Water system 400 liters * Sweeping drive, hydrostatic * 6956 operating hours * Ideal for sidewalks, footpaths, and bicycle paths, narrow streets, etc. * 2-person full-comfort cabin * Air conditioning * Heated panoramic windshield * Comfortable suspension seat * Rearview camera Fpedpfx Alovhp E Hs Ssn * Ergonomic arrangement of all controls * Radio, Bluetooth, MP3 * LED daytime running lights * All-round warning lights * 4-cylinder diesel engine, Euro 6 * Self-propelled working machine, street sweeper * Wheelbase: 1,600mm * Gross vehicle weight: 3,500 kg * Unladen weight: 2,810 kg * 50 km/h approval If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false assumptions arise regarding the condition and suitability for the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, operating hours: 8,891 h, mileage: 92,412 km, power: 62 kW (84.30 HP), first registration: 10/2012, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: ABS, air conditioning, cabin, power assisted steering, seat heater, soot filter, German vehicle, 1st owner, condition as shown in photos, Schmidt Swingo available in multiple units, only 8,891 sweeping hours, selectable four-wheel steering, two front disc brushes (800mm width), front pre-spraying system, sweeping width: 2,800 mm, ideal for footpaths, cycle paths, and narrow alleys, 1.8 m³ debris hopper, fresh water volume: 180 liters, total water volume: 360 liters, hopper lid opening and tipping via cable remote control, VM 56C/9 engine, output: 62 kW, air conditioning, reversing camera, radio, 2 seats, air-suspended driver’s seat, EasyDrive (hydrostatic drive) (SN), seat heating, warning beacons, gross vehicle weight: 4,500 kg, unladen weight: 2,850 kg, payload: 1,650 kg, self-propelled machine. If a new technical inspection (TÜV) is required, we are happy to provide a quotation from one of our partner workshops. Our offer generally excludes new TÜV inspection, new DGUV, new SP, and new UVV. You can find more trucks and commercial vehicles on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We recommend and strongly encourage viewing and inspecting the goods to avoid any misunderstandings about their condition and suitability. Viewings and inspections are welcome by appointment at any time. All information is provided without guarantee. We accept no liability for errors or incorrect descriptions in the offer. Buyers are obliged to independently verify the condition and features of the goods/vehicles. Fpsdpfx Alevhqgle Sjn Subject to change, prior sale, and errors.

Condition: used, operating hours: 7,572 h, mileage: 66,403 km, power: 62 kW (84.30 HP), first registration: 06/2018, overall weight: 3,500 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 690 kg, empty load weight: 2,810 kg, wheelbase: 1,600 mm, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Multiple available * First hand * Condition, see photos * Only 4,191 sweeping hours * 2 disc brushes at the front, 700mm wide * Pre-spray device * Sweeping width up to 2,300-3,020mm * Total width 1,320mm * Working speed 0-16 km/h * Sweeping waste container 1.8m³ * Water system 400 liters * Hydrostatic sweeping drive * 7,572 operating hours * Ideal for pedestrian and cycle paths, narrow alleys, etc. * 2-man full comfort cabin * Air conditioning * Heated panoramic windshield * Comfortable suspension seat * Rear view camera * Ergonomic arrangement of all controls * Radio Bluetooth MP3 * LED daytime running lights * Rotating beacons * 4 cylinder diesel engine Euro6 * Self-propelled street cleaner work machine * Wheelbase: 1,600mm * GVW: 3,500 kg * Empty weight: 2,810 kg * 50 km/h registration If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  Fodpfx Aley Rgdwe Sopn We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false ideas about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, Year of construction: 2007, functionality: fully functional, Meba Band Saw 410 DGA Semi automatic Horizontal Bandsaw – Year 2007. Fedpfoz Hffyox Al Sepn Cutting range: 90° round: 410; flat: 700 x 400. 5.5 kw.

Condition: new, power: 382 kW (519.37 HP), first registration: 01/2026, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 490 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beams - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Air horn - Particulate filter - PTO (Power Take-Off) - Radio/Multimedia system - Sunroof - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system = Notes = Internal number for customer inquiries: 3-039 Fsdpfx Alez Hkc Ds Sopn MAN TGS 33.520 6x4 BL chassis in cab color black and white in stock!!! Wheelbase 3,900 mm and 4,200 mm!!! !! IMMEDIATELY AVAILABLE IN STOCK !! ∗EURO 6E!! Cab TM: the comfortable one (narrow, long, medium height) All-wheel drive 6x4 Suspension type: leaf/air (BL) 3,900 mm main wheelbase, 1,400 mm wheelbase between rear axles -> and in 4,200 mm wheelbase in stock Diesel engine MAN D2676 LF78, 520 hp, 2,600 Nm torque, Euro 6e Automatic transmission MAN TipMatic 12.28 OD, with retarder 35 Retarder Eco, speed-dependent, adjustable, energy-efficient High-performance engine brake MAN EVBec, adjustable Differential lock Rear-driven rear axles Trailer coupling on end cross member, RINGFEDER Type 4040/G150B Control panel MAN EasyControl, 4 functions, can be operated from the outside when the door is open Driver's comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating Multi-function steering wheel, leather, adjustable in height and inclination Bunk, lower, with slatted frame and head adjustment Sunblind windshield, interior, electric Pull-out refrigerator and drawer Infotainment control MAN SmartSelect with touchpad and direct access MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced with subwoofer Smartphone integration and more. Financing / lease purchase, as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = General information Cab: Long-distance transport Technical information Number of cylinders: 6 Engine displacement: 12,419 cc GVW: 33,000 kg Axle configuration Brakes: Drum brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: Leaf suspension Rear axle 1: Tire size: 315/80-22.5; Differential lock; Suspension: Air suspension Rear axle 2: Tire size: 315/80-22.5; Differential lock; Suspension: Air suspension Condition General condition: very good Technical condition: very good Optical condition: very good Damage: none

Condition: used, functionality: fully functional, machine/vehicle number: 33124, mileage: 999 km, power: 235 kW (319.51 HP), first registration: 08/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, MAN PowerMatic 08.12.OD torque converter automatic transmission, operated with Fpedpfx Aez Ha Ivol Ssn steering column lever, manual (DNR selector), heated fuel filter, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full-brake assist, emergency brake assist EBA Plus, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, MAN EasyStart hill start assist, exhaust pipe positioned high and to the left behind the cab, lane departure warning LDW, turning assist, MAN AttentionGuard driver alertness system, preparation for alcohol interlock, traffic sign recognition, distance warning, trailer hitch Rockinger 400G150B (40 mm) Cab CC (narrow, short, normal height), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, rain sensor, light sensor, LED headlights, LED daytime running lights, tinted windshield and door windows, lift-up roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multi-function steering wheel, safety automatic, cruise control, digital axle load display (ALM), MAN Media System Navigation Advanced 7-inch with navigation and Bluetooth hands-free system, rear view camera, smoker's package, 2x LED rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, sun visor on driver's door, sun shield Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 11.5 m³ (sludge compartment approx. 10.5 m³ / water compartment approx. 1.0 m³), water compartment is welded into the front of the container with inspection opening, water compartment level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow line, 2x water tanks, each approx. 0.5 m³, on the left/right side of the container made of plastic, rear flap hydraulically opens upwards over the entire cross-section with pipe rupture protection, hydraulic latch locking, sludge compartment level indicator with external scale with divisions every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge apron made of stainless steel, 2 pneumatically operated slide valves, container discharge: free discharge through the lower suction connection or by tipping to the rear, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the control panel, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, control panel made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, hooks on the bottom flap for transporting long continuous hoses, waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand wash basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the

Condition: used, Year of construction: 2003, Wood bandsaw blade setting machine Kohlbacher Stingrey Plasma welding process Fjdpfx Alez Hy Ucj Sepn Fully automatic The hardfacing material is melted in a copper mold, creating a pre-shaped tooth Inductive stress relieving Blade width 30 - 360 mm Blade thickness 0.6 - 4 mm Adjustable tooth spacing 20 - 100 mm Working speed 3 - 6 teeth/min. Welding material Stellite rods, 3.2 mm Ø Saw blade support Central electric clamping device for bandsaws up to 12 m

Condition: used, mileage: 145,000 km, power: 120 kW (163.15 HP), first registration: 12/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, total length: 6,967 mm, total width: 2,020 mm, total height: 2,633 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, For sale is a well-maintained Mercedes-Benz Sprinter 316 Tourer MAXI with the popular 2.1-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 emission standard * First owner * Complete service history * M1 passenger car registration Equipment: MAXI version * Tourer version * 7 seats (up to 9 seats possible) * Air conditioning front + rear * Parking heater including remote control * Passenger airbag * Electric step * MBUX Fjdpez Ighxsfx Al Sspn * Apple CarPlay * Android Auto * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer license plates (5-day/customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally prepared and hygienically clean! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior. * If necessary, paint correction and Smart Repair All of our vehicles have also undergone a thorough maintenance check. Of course, this includes new fluids, filters, and other expenses that you don't need to worry about. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special equipment: Entry lights, chassis: stabilization stage I, remote control for auxiliary heater, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, radiator grille frame in vehicle color, charging package dashboard (USB connections and 12V socket additionally), multimedia system MBUX (7" touchscreen), hands-free system Bluetooth, steering wheel with multi-function buttons, parameterizable special module, spare wheel in driving condition, spare wheel holder under frame end including jack, mud flaps rear, mud flaps front, safety belt system with warning system (passenger side), seat equipment: comfort headrest, passenger seat, seat equipment: comfort headrest, driver's seat, seats in the load/passenger compartment: 1st row, 3-seater bench, narrow, step rear door, USB connection in the middle under the dashboard (charging function only), trim rear doors, trim in the load/passenger compartment luxury, front axle reinforced, jack, thermal insulation driver's cabin, thermal insulation load/passenger compartment, additional turn signals rear (roof), auxiliary heater (hot water), additional heat exchanger, two-way speakers front and rear Other equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard passenger side, storage compartments: luggage net on the rear doors, storage net on the front seat backrest left, storage net on the front seat backrest right, towing eye rear, adaptive brake light, airbag passenger side, airbag driver side, traction control system (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display.

Condition: used, roll diameter 400 mm Fodpfszhn U Njx Al Sopn throat 400 mm table-size 610 x 500 mm saw band length 2780 - 2980 mm turning speeds 22 - 147 m/min weight of the machine ca. 0,4 t dimensions of the machine ca. 0,6 x 0,8 x 1,9 m Bandsaw with - Ideal welding unit - Grinding unit - Machine light

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Fpjdpfx Ast Dpw Rel Son Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Available from stock! Fjdpfxswcwggs Al Sjpn Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic bandsaw with dual-sided mitre adjustment from 90° to 30°, stepless via scale with 0.5° accuracy. Includes the optional micro-spraying system! Hydraulic lifting/lowering of the saw frame Semi-automatic sawing cycle Hydraulic material clamping / short-stroke cylinder Rapid downfeed to material top edge 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25 mm

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Fsdpfx Ajz Hnzkjl Sopn Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: used, Year of construction: 1975, roll diameter 440 mm throat 420 mm workpiece height 200 mm cutting speed 20 - 1550 m/min table surface area 560 x 560 mm band length 3250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 2,1 m Bandsaw with Fpedpovu Hb Eofx Al Ssn - Saw blade welding unit - Grinding stone - Saw bands - documentation