Used Solar Fastener End Clamp for sale (15,845)

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later. Knjdpfxjznr Sle Aqiob

Condition: good (used), Fully automatic horizontal stretch wrapper, orbital wrapper, Bang BC-40 CA – used - : Price ex location: only €5,950 (net)! Manufacturer: Bang & Co Model: BC-40 CA Year of manufacture: Kjdpfxjy Ru Nuo Aqionb The BC-40 CA is a fully automatic horizontal stretch wrapper for bundling and spiral wrapping products that need to be secured on a corrugated cardboard sheet. After activating the foot switch, the machine automatically centers the sheet placed on the infeed conveyor and transfers it to the rotating ring. The size of the sheet is automatically detected and assigned to one of ten selectable wrapping programs. The transport and ring rotation speeds are adjustable and are controlled via frequency inverters. The product is automatically fixed onto the sheet by the machine, and a clamping and cutting system attaches and trims the film at the beginning and end of the wrapping cycle. The machine features a quick-change system for easy film roll replacement. - Max. roll diameter: 150 mm - Film width: 70-125 mm - Core diameter: 38 mm - Film thickness: 15-35 µ - Ring rotation speed: 30-140 rpm - Power supply: 220/240 V – 50/60 Hz, 1 phase - Machine weight: 320 kg - Machine start: foot switch - Infeed/outfeed conveyor length: 1500 / 500 mm - Compressed air consumption: 0.75 l/m³ NL/min - Compressed air: 6 bar - Compressed air consumption per cycle: 0.15 Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, mileage: 148,993 km, power: 74 kW (100.61 HP), first registration: 08/2016, fuel type: diesel, overall weight: 2,030 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1058. GK56974 ----EQUIPMENT * Transmission: 5-speed manual * ABS with EBD * Airbag, driver side * Exterior mirrors, electrically adjustable and heated * Hill start assist * Floor covering, rubberized, front * On-board computer including exterior temperature display * Third brake light * Diesel particulate filter (DPF) * Double-wing rear door without window * Electronic Stability Program (ESP) with Traction Control (TCS) including Torque Vectoring Control * Power windows, front, electric - with quick-down function for driver's side * Ford ECO-Mode and gearshift recommendation display - indicates environmentally friendly driving * Ford Easy Fuel - comfort fuel filler and misfueling protection * Glove compartment with lid * Interior lighting, front and in passenger/cargo area with delay function * Air conditioning, front, including manual recirculation function * Paint: Solid color * Cargo area protection, plastic, molded * Cargo area lining, side, half-height * Steering column, adjustable in height and reach * Fog lights * Emergency brake light - activates hazard warning lights during heavy braking * Package: -25°C starter package * Radio: "MyConnection Radio" audio system - Radio (FM/AM) - AUX input - MP3 compatible - USB port - Bluetooth interface - Audio remote control on the steering wheel - Hands-free system * Sliding door, rear, right * Side protection strips, plastic * Power steering, electro-mechanical EPAS (Electric Power Assisted Steering) * Safety brake assistant EBA - Emergency Brake Assist * Seat belts, front, height adjustable - seat belt pretensioners and load limiters, front - warning system for driver's seat belt not fastened Kedshzdtpopfx Aqijnb * Automatic central locking of doors (45 seconds) * Seats: Seat package 18 - fabric, dark "Route" - passenger double seat, foldable and storable - driver's seat, 4-way adjustable (forward/backward / up/down) with lumbar support * Front spoiler lip * Dust and pollen filter * Storage compartment, covered, on dashboard with 12-volt socket * Socket: 12-volt socket in storage compartment on dashboard (driver's side) * Socket: 12-volt socket in cargo/luggage area * Bumpers, front, and bumper end caps, rear, painted in vehicle color * Daytime running lights * Partition wall to cargo area with pass-through opening, without window * Lashing eyes * Immobilizer * Heat-insulating glazing, lightly tinted * Central locking with remote control * Auxiliary heater, electric (PTC), front ... and more ----The vehicle is in original condition! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, functionality: fully functional, Aluminum silo with a long base ring (flour silo) Technical data / Dimensions Available quantity: 3 Volume: approx. 63,200 liters Container type: Silo Condition: used Food-grade: yes Design: standing Inner diameter: approx. 2,400 mm Outer diameter: approx. 2,500 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 19,000 mm Specific weight of the medium: 0.60 t/m³ Operating pressure: Non-pressurized Material / Properties Material, inner lining: Aluminum Notes: Material: AlMg3 Equipment Base design: Foot ring / base ring Number: 1 Mounting: fixed Bottom type, top: Conical bottom Bottom type, bottom: Cone Top: 1 x Roof edge railing with handrail 2 x Crane lugs 1 x Overpressure valve 1 x Strainer on flange DN 1000 with reducer 1 x Flange for level limit indication 2 x Flange for level measurement The connections vary slightly between the three existing silos. Shell: 1 x Manhole DN 500 with star-grip closure 1 x Vent dome DN 500 1 x Access door 850 x 1800 mm 7 x Pipe clamps for filling pipe 1 x Filling pipe, ending in a threaded connection at the bottom Knodpfjzw Nv Tox Aqijb 2 x Cable protection conduit DN 50 Bottom: The silo has a 40° cone at the bottom, which ends in a flange DN 1500 for the attachment of a vibratory floor. At the bottom / cone: 1 x Vibratory floor VB 1400 with motor and emergency shut-off slide Notes: The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its function! There are a few weld seams on the base ring (closed connections / openings).

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Ksdpfx Aoxranpoqisnb Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm Ksdpfx Aqozibdtsijnb • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: like new (used), Year of construction: 2023, 5x Vacuum Tube Lifters with Column Slewing Crane, 4m Jib, 4m Height, 80kg Load Capacity – used –: Price per unit, ex site: €12,500 (net), dismantled, packed, and loaded! Manufacturer: Timmer Model: S5/SON Type: lightLIFT 50 kg Article No.: S5-4000/SÄ4000/43-80SO Year of manufacture: 2023, rarely used Short Description/Application: Handling of cartons up to max. 40kg Ideal for Spax cartons Tube lifter: lightLIFT 50 kg Model: UST-LL-HE-140/50-2.5-FH Lifting unit: lightLIFT with fixed handle Handle length: 300 mm Lifting capacity: 50 kg Lift tube Ø: 140 mm Lift tube length: 2,500 mm Unit includes: - Electric vacuum blower Medium incl. motor protection switch, enclosure for motor protection, and vibration dampers Weight: approx. 54 kg Vacuum suction hose Material: PVC Diameter: 38 mm, length: 15 m Colour: Black For vacuum generators: SMALL, MEDIUM, LARGE and vacuum pump Double holder for parking the suction pads as a clamp solution for crane column 180x180mm Dual-side mount for suction pad 62740700 and cross bar 62740650 Colour: RAL7035 light grey Column slewing crane with fastening material Column slewing crane with jibs, Type RB Load capacity: 80 kg Jib length: 4,000 mm Design: - Sturdy slewing brackets - Smooth-running jib bearings (Zedex-25/K) - Manual slewing resistance adjustment (prevents arms from swinging by themselves) - Slewing range approx. 250° each Jib Arm: - 4,000 mm jib arm length - Adjustable support strut - Jib made of profile steel - Reinforcement element - P3 profile running rails (42.5x47.5x3mm), galvanized, under the jib arms - Load capacity: 80 kg Incl. slewing angle limiter Column: - Height (lower edge of running rails): 3,500 mm - Column height: 4,000 mm - Column 180x180x6 mm - Base plate with gusset plates (600x600x15 mm, optionally 1000x1000) Original new price for the 5 units approx. €70,000 (net) Available: immediately Condition: very good Kedpfx Aqoxugftsienb Location: Hamm AB (acceptance report), operating manual, etc. available as PDF upon request.

Condition: new, Year of construction: 2026, The Josan S21 is a compact, robust, and powerful wheel loader with full equipment at an attractive price. With a lifting capacity of approximately 1,200 kg and a low overall height, it is ideally suited for low entrances, halls, stables, and farm work. Despite its compact design, the S21 features a spacious full cab with heating and ventilation. With an unladen weight of only approximately 2,200 kg, the wheel loader remains comparatively light and can be easily transported on a suitable trailer. The wide cab provides comfortable working conditions and good all-around visibility. ‼️ IN STOCK ‼️ AVAILABLE FOR ON-SITE INSPECTION ‼️ OUR COMPONENTS ✅ Nationwide FREE delivery to your farm! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier that also sells to high-end wheel loader manufacturers. This ensures sensitive and precise raising and lowering of the pallet fork. Feel free to test it on our premises! ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc., are treated in this way. This provides extreme rust protection, which is INCLUDED! ✅ NEW! Larger luxury cab for more legroom. With reinforced steel, we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight ✅ NEW! LIFTING CAPACITY approx. 1200 kg! ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by experts in our own workshop ✅ We stock all spare parts in Gemmrigheim. This allows us to ship parts within 24 hours. ✅ We have our own factory in China! ✅ Continuous monitoring during the production process ensures very high quality. ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe). Technical data: ➡️ Unladen weight ONLY approx. 2200 kg ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): approx. 4200 x 2200 x 1600 mm ➡️ Euro 5 engines ➡️ All-wheel drive ➡️ Cab width approx. 1.25 m ➡️ Internal cab height approx. 1.35 m ▶️ Tipping height approx. 2.85 m ➡️ New with large comfort cab (internal width approx. 1.10 m) ➡️ Articulated steering ➡️ Adjustable steering column ➡️ Large all-round view ➡️ Hydraulic oil cooler ➡️ UVV NEW 1 year ▶️ Additional control lever to regulate the tilting speed of the bucket/fork ➡️ Automatic engagement of creep and fast speed ▶️ 2-stage torque converter transmission, electrically controlled ➡️ Electric joystick for forward and reverse movement with thumb on the joystick ➡️ Wide tires 31/15.5/15 AS profile (Note: only the narrow tires are shown in the picture) ➡️ 3rd and 4th control circuits with separate small joysticks ➡️ Float function ➡️ Safety belt ➡️ Bucket Optional: ➡️ AVAILABLE IMMEDIATELY! Combined pallet fork with attachment and tines (We have 1.20m tines and two spears, length approx. 90cm) ➡️ Euro attachment with hydraulic locking pins ‼️ We also have a wide range of accessories, from bale clamps and crocodile jaws to snow plows! Just ask. Net price €12,999.00 +19% VAT €2,469.81 Gross price €15,468.81 Kodpfx Aeufwyzsqionb Errors and omissions excepted Images/text may vary *Please inquire about our warranty conditions.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 71,080 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, controller model: Siemens SINUMERIK 840D, TECHNICAL DETAILS Travel in X-axis: 5,000 mm Travel in Y-axis: 3,000 mm Travel in Z-axis: 1,500 mm Max. workpiece dimensions (L × W × H): 4,000 × 2,000 × 1,000 mm Table length: 4,050 mm Table width: 2,050 mm Table height: 500 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Rapid traverse rate X-axis: 65 m/min Rapid traverse rate Y-axis: 65 m/min Rapid traverse rate Z-axis: 65 m/min Position of milling head: vertical Tool interface: HSK 63A Spindle speed: 22,000 rpm Spindle power: 30 kW Torque: 28.6 Nm Tilting axis A: ±110° Rotational range C-axis: ±182.5° Magazine capacity: 20 stations Max. tool diameter: 100 mm Max. tool weight: 6 kg MACHINE DETAILS Control system: Siemens SINUMERIK 840D Connected power: 150 kW Dimensions & Weight Dimensions (L x W x H): 8,000 x 7,500 x 6,200 mm Dimensions of control cabinet (L x W x H): 600 x 4,200 x 2,600 mm Machine weight: approx. 78,000 kg Operating hours: 71,080 h EQUIPMENT Knodpfszyl Azex Aqiob Dust extraction hood on the milling head for connection to an on-site dust extraction system NC4 laser system for contactless tool measurement and tool breakage monitoring Renishaw RMP60 wireless probe for workpiece measurement Bellows/roller covers

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts Knjdpfsxxhwlox Aqisb • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Kodeum I Sfspfx Aqionb Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 Kjdpfx Aqszxz Azeienb - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. Ksdpfxsx Ein Se Aqienb - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 2,900 kg, Clamp fork Condition (Technical): normal Description: German: KAUP clamp fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Load capacity: 2,900 kg Load center: 500 mm Center of gravity: 340 mm Load center distance: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic attachment for forklifts, enabling both the normal lifting of loads via the fork tines and the lateral clamping of suitable goods. The attachment is in used condition, with cosmetic wear commensurate with its age. A thorough technical inspection and a check of compatibility with the respective forklift should be carried out before use. Fast and straightforward transport is possible upon request! This advertisement serves solely to identify the attachment. A detailed description of the condition and possible equipment is provided individually upon request. Subject to errors and prior sale. Sale only to commercial businesses. All sales of used equipment are made without warranty or guarantee. If you have not found the right attachment, please contact us. We have a large selection of other equipment and attachments available on site. English: KAUP Clamp Fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Capacity: 2,900 kg Load centre: 500 mm Centre of gravity: 340 mm Lost load centre: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic forklift attachment and can be used both for conventional handling with the forks and for clamping suitable loads from the sides. The attachment is in used, age-related visual condition. A detailed technical inspection and verification of compatibility with the respective forklift should be carried out before use. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site. Knedpfx Aozt Drhjqiob

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min Ksdoyu U Dfjpfx Aqisnb total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: good (used), Year of construction: 2007, operating hours: 63,868 h, functionality: fully functional, machine/vehicle number: 413089, clamping force: 500 kN, screw diameter: 30 mm, overall weight: 3,400 kg, We are selling a fully functional EE50. It is connected to the power grid and can be inspected at any time. Accessories: Handling interface EM67. Kodpfxjz Dq N Ss Aqionb

Condition: new, Year of construction: 2024, Exhibition Machine Year of Construction: 2024 Equipment and Technical Data: Robust German engineering for trimming, cross-cutting, formatting, mitre cutting, etc. - Top-mounted control panel at eye level, swiveling, incl. fence guide - 7" touchscreen control for the electromotive positioning of cutting height, saw blade swivel adjustment, cut width stop and optionally for the height and side adjustment of the scoring saw Auto-EPS. Tool database for 50 saw blades and display of the current speed. - Electromotive height and swivel adjustment - Swivel range of the saw blade from 0 to 47° - APA saw blade quick clamping system - Speed of main saw blade 3000/4000/5000/6000 rpm - Protective device that can be swiveled away on both sides, safety guard with interchangeable insert wide/narrow for saw blades up to Ø 450 mm - Width stop with a cutting width of 1250 mm, electromotive - Trolley with a cutting length of 3200 mm and locking every 50 mm - Cross slide with support roller and adjustable extension in both directions. Length stop with mm scale and extension up to 3500 mm with 2 adjustable folding stops and 1 end stop, simultaneously usable as an angle mitre stop on both sides, infinitely adjustable from 0-46° with automatic length compensation and detent for 15°, 22.5°, 30°, 45° fixable. - Push-button control with electronic soft start (start/stop) - Electronic, maintenance-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at the width stop 1250 mm, electromotive - Length stop on the cross slide extendable up to 3500 mm - Max. saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast iron table top 1200 x 665 mm - plus table extension 750 x 655 mm - Table extension 1430 x 940 mm - Table height / working height 900 mm - Extraction connection 120 mm on the machine body, 80 mm on the safety guard - Motor power 5.5 kW / 7.5 HP - Electrical voltage 400 V / 50 Hz - Trolley, length and width stop profiles anodized - Machine body and swivel arm powder-coated in anthracite RAL 7021, cladding sheet safety guard on top in violet blue RAL 5000, on the machine body in light gray RAL 7035 - Footprint: 7110 x 4150 mm - Weight: approx. 1050 kg depending on the model, up to 1250 kg - CE compliant, GS tested, BG-wood dust tested Special equipment: Incl. scoring unit 0.55 kW, electromotive positioning for side and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table into a lateral parking position, so that larger saw blades than Ø 350 mm can also be used without removing the scoring saw blades. Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: Tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by incremental adjustment by 0.05 mm per step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z = 12+12 Kjdpfx Aqsw I Ummsionb Incl. SWIVELING DEVICE FOR THE CROSS SLIDE Quick and ergonomic sliding into the parking position Incl. Length stop with digital display mounted on each stop flap, adjustable to 0.1 mm, length max. 3300 mm

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. Knedpozhnafofx Aqijb - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Knodoyuchxepfx Aqijb Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC Knjdjywgpajpfx Aqieb 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes Ksdoztr Rrspfx Aqionb ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade Ksdpfx Aqezutraoisnb POST_Element Splitter NC-Hops 7.0

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm Knodpfx Aqsyrhu Ssiob total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: new, Year of construction: 2017, Spiral conveyor for pellets and granules: For discharging and conveying pellets with a capacity of 600 kg/h and a bulk density of 0.7 t/m³, and filling 4 big bag stations with a safety end discharge. 1 Transitube discharge hopper, type: SC – 200 Capacity: 200 liters Overall height: 1,270 mm Without lid With sturdy grating as grip protection With built-in empty indicator, vibrating rod sensor All parts in contact with the product made of stainless steel 1.4301, glass bead blasted 1 Transitube screw conveyor, type 53 PCR Knedpfx Aqozk I Tksijb Conveying length: 10 m (+/- €285 per meter) Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Conveying screw with square profile 7x7 made of stainless steel Flexible outer hose made of food-grade polyamide Inlet flange type SC Ø 150 with blanking lid for emptying and 2 clamping rings R Insertion tube for coarse adjustment of the output Outlet flange type GW Ø 150 with grip protection and 2 clamping rings R Sensor connection type M1SW with built-in vibrating rod as maximum level indicator All sheet metal parts made of stainless steel 1.4301, glass bead blasted 1 transitube® screw conveyor, type: 53 PCR/VA PM Conveying length: 8 m Motor with frequency converter, provided by the customer: 230/400 V, 50 Hz, 1.1 kW, 920 rpm Flexible outer hose made of food-grade polyamide Square screw 7x7 made of stainless steel 4x intermediate outlets type GM DN 150 with clamping ring Pneumatic shut-off valve with safety end discharge Outlet flange type GW DN 150 with clamping ring Flexible hose 2 meters with mounting flange P1SW for connecting to a container All parts in contact with the product made of material: 1.431, glass bead blasted 4 BIG BAG filling frames Consisting of: 1x base frame, open on one side, internal dimensions 1,500 mm x 1,500 mm Including base plates for connecting the stations and prepared for anchoring in the floor 4x support columns 2100 mm (big bag height 1,850 mm) 1x top frame for hanging the bags With hanging hooks for big bags 1,300 x 1,300 and 700 x 1,100 mm Mounting plate, dimensions provided by the customer for push buttons and light column Support columns and frame parts made of stainless steel Filling connection set consisting of: Crossbars for supporting the conveyor with mounting flange P Ø 150 and P1SW Ø 150 for connecting to the conveyor with built-in vibrating rod as full level indicator Bag spout and bag clip for DN 300

Condition: new, Year of construction: 2021, Optimill MB 4PV Drilling and Milling Machine including Accessories (New, Unused Condition): Included accessories: - 20-piece set of packing plates - RTE 165 rotary table - SPW 12 58-piece clamping tool assortment - 4x SE55 leveling feet with vibration dampers - MK4/M16 ER32 3-20 mm collet chuck set Heavy, robust cast construction High smoothness due to ground gears running in an oil bath Forward and reverse operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed for the X-axis Coolant system Machine lamp Gear head swivels ± 45° Massive dovetail guide of the column, hand-scraped, for maximum stability and precision Height-adjustable, large protective screen with microswitch Drill depth stop Digital position display DRO 5 Drilling / tapping function Heavy-duty, large cross table, precisely machined surface with T-slots and adjustable gib strips Solid cast machine base with chip tray Single-speed quality industrial motor Wide speed range from 60 - 2,760 rpm via 2 infinitely variable speed ranges SIEMENS SINAMICS V20 frequency inverter Dimensions and weights: Length approx. 1,600 mm Width/Depth approx. 930 mm Height approx. 2,110 mm Weight approx. 495 kg Drilling-Milling Head: Drilling-milling head tilt range ± 45° Drilling-Milling Capacity: Maximum face mill size: 63 mm Maximum end mill size: 26 mm Ksdpsyxyivefx Aqienb Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal Milling Table: Length: 800 mm Width: 240 mm Distance vertical spindle to milling table max.: 420 mm T-slot size: 14 mm Number of T-slots: 3 T-slot spacing: 80 mm Coolant System: Coolant pump(s) drive rating: 100 W Standards and Approvals: Standard: DIN EN 55011 EMC class: C2 Travel Range: X-axis manual: 560 mm Y-axis manual: 195 mm Z-axis manual: 350 mm X-axis automatic: 480 mm Vertical Spindle: Throat: 258 mm Spindle taper: MK 4 Speed range: 60 – 2,760 rpm Number of speed ranges: 2 Speed control: electronic Drawbar: M16 Quill diameter: 75 mm Quill travel: 120 mm