Used Spinner Spinner Tts 42 for sale (4,568)

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system Dksdpfx Apeqmc Raowjl 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Condition: used, Year of construction: 2006, Zum Verkauf steht ein Posten pneumatischer Ventile und Antriebe des Herstellers Festo. Gesamtmenge: 42 Stück – 28 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – 14 Einheiten: pneumatische Antriebe / Komponenten Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: Dksdjyxqluopfx Apwsl – Industrieautomation – Lebensmittel- und Getränkeindustrie – Chemische Industrie – Wasser- und Prozesstechnik – Wartung und Ersatzteile Neupreis vergleichbarer Festo Einheiten: ca. 150–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 2.900 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: lot of pneumatic valves and actuators by Festo Total quantity: 42 units – 28 complete units with stainless steel ball valves – 14 units: pneumatic actuators / spare components The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – industrial automation – food & beverage processing – chemical industry – water treatment and process systems – maintenance and spare parts supply Estimated new price of comparable Festo units: approx. 150–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 2,900 € negotiable Location: Slovakia (EU) Worldwide shipping possible

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor Dedpfsyh Axnex Apwekl -Manufacturer: Nucleus, servomotor -Type: NUDrive MP42 2A Size 42 R Rev.2 IP64 -Item No.: DS421106 -Shaft: Ø 14 x 35 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 134/42/H56 mm -Weight: 0.6 kg/pc.

Condition: used, mileage: 38,811 km, power: 290 kW (394.29 HP), first registration: 10/2002, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: semi-automatic, emission class: euro3, Year of construction: 2002, Equipment: electronic stability program (ESP), * ACTROS 2640 L FIRE TRUCK * ZIEGLER TMB F42 RL FIRE PUMP * BRONTO SKYLIFT F42 AG SWITZERLAND-815 Rümlang * Maximum working height: 42 m + lateral outreach: 21.20 m * Basket load: 400 kg for up to 4 persons Dodpfx Apsxrhpujwekl * Former vehicle of the DAIMLER AG PLANT FIRE BRIGADE * Vehicle No. for customer inquiries: 3259 * Telligent trailing axle, hydraulically steered * Rear axle air suspension * Rear axle differential lock * Telligent anti-roll control * Telligent braking system with ABS and ASR * Front axle air suspension * Standard driver’s air-sprung seat by Isringhausen * Standard passenger’s air-sprung seat by Isringhausen * Driver airbag * Cruise control * Telligent gear shift * Gearbox G 211-16/17.0-1.0 * Central locking * Electric window lifts, driver and passenger doors * Two-seater * Main tank 400 l, steel * Tachograph, 1 day + 2 drivers, modular * Wheelbase 4,500 mm * Wheel arrangement 6x2/4 NLA * Exterior mirror, electrically adjustable, driver’s side * M-cab * Tubeless tires, 315/70 R 22.5 HA * Full service history * Weight version 26.0 t (8.0/11.5/7.5) * Cab with low roof, standing height 1560 mm * Engine type Euro III No liability for printing or typographical errors. Sale only to businesses. Subject to prior sale and errors. Changes, interim sale, and errors expressly reserved. This description serves for vehicle identification and does not constitute a warranty in the sense of purchase law. Only the description in the purchase contract is binding. * TOP SERVICE & QUALITY * We can gladly offer you a LEASING – FINANCING – HIRE PURCHASE proposal Guarantee insurance available upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and OBU installation possible onsite through our partners * Export license plate for 30 days available All export customs documents possible but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen train station (Wuertt) * ARRIVAL BY TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit our website at * over 200 vehicles always in stock

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 6,400 h, load capacity: 4,500 kg, lifting height: 3,700 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: TOYOTA, gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,100 mm, fork length: 1,400 mm, fork width: 130 mm, fork thickness: 60 mm, tire condition: 50 %, front tire type: superelastic tires (black), front tire size: 300-15, rear tire type: superelastic tires (black), rear tire size: 7.00-12, overall weight: 12,176 kg, empty load weight: 7,676 kg, total height: 2,300 mm, total length: 3,050 mm, total width: 1,400 mm, color: yellow, Equipment: cabin, lighting, pallet forks, trailer coupling, 🔍 Looking for a Reliable Forklift? We Are Industry Experts! We specialize in selling high-quality forklifts, offering tested machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! 🚜💼 🔥 In this listing, we present: 🚀 COUNTERBALANCE FORKLIFT - TOYOTA - 42-4FD40 - DUPLEX 3700mm 📏 - Year 2011 🏷️ - 6117MTH ⏳ - DIESEL ⛽ - CONDITION 5/5 🌟 This forklift is in excellent technical condition, ready for immediate use. ⚙️🔧 📌 Key Features and Technical Data: 📍 Model: TOYOTA 42-4FD40 📍 Year of manufacture: 2011 🏗️ 📍 Lifting capacity: 4500 kg 🏋️‍♂️ 📍 Operating hours: 6117 MTH ⏱️ 📍 Mast type: Duplex 🚜 Dksdoy Hlh Hjpfx Apwsl 📍 Lifting height: 3700 mm 📏 📍 Drive type: Diesel ⛽ 📍 Load center: 600 mm 🎯 📍 Engine manufacturer: Toyota ⚙️ 📍 Power: 75 HP 🔥 📍 Total weight: 7676 kg ⚖️ 📍 Tires: Solid, Superelastic, in good condition 🛞 📍 Front tires: Superelastic - 300-15 - 50% tread 🔄 📍 Rear tire: Superelastic - 7.00-12 - 50% tread 🔄 📍 Overall height (collapsed mast): 2500 mm 📐 📍 Technical condition: Fault-free, after a service inspection 🛠️ 📍 Visual condition: Very good 👌 📍 Fork length: 1400 mm 🔩 📍 Overall height: 2300 mm 📊 📍 Total length: 3050 mm 📏 📍 Total width: 1400 mm 📐 📍 Positioner width: 1100 mm 🔧 🎯 Equipment Included: 💡Lighting 🔧 Adjustable boom 🦾 Pallet forks This forklift is the perfect solution for industries that require efficient transport of heavy loads in demanding environments, such as construction 🏗️, logistics 🚛, and manufacturing 🏭. Thanks to its powerful diesel engine ⛽, it provides high performance, durability, and reliability, making it ideal for both indoor warehouses 🏢 and outdoor operations 🌳. 🚀 Additional Features: ✔ Strong and efficient diesel engine 🔥 for demanding applications ✔ Comfortable operator cabin 🛋️ with ergonomic controls ✔ High reliability in intensive use 🔝 ✔ Excellent performance on rough terrain and in outdoor conditions 🌍 Designed for heavy-duty operations, this forklift ensures precise maneuvering, high lifting capacity, and optimal warehouse efficiency 📦. 🛠️ Condition: ✅ Fully functional ✅ Regularly serviced ✅ Ready for immediate work! 🚛💨 📦 We offer transport across Europe 🌍 and provide a FREE initial inspection 🆓! 💰 Pricing & Formalities: 💳 We provide full support for financing options, including quick leasing and credit approvals 💰, even for new businesses 🚀 or companies in challenging financial situations. ✔ Leasing decision in just 2 hours! ⏳ ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & start-up program for new businesses 🚀 ✔ We are an authorized supplier for most leasing companies 🏦 ⚡ FAST / SIMPLE / AFFORDABLE FINANCING 💼

Condition: used, mileage: 905,000 km, power: 220 kW (299.12 HP), first registration: 05/2010, fuel type: diesel, number of seats: 42, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Setra 415 NF with 42 seats - Air conditioning - Automatic transmission - Matrix system - Euro 5 - * Diesel - 11,967 cc - 220 kW - 299 hp - Euro 5 - Green sticker - TÜV (German Technical Inspection Association) * 42 seats + 1 driver + 1 wheelchair space with manual wheelchair ramp - * Auxiliary heating / Radio / ABS / ASR - Double-width rear door - Single-width front door - * Vehicle dimensions: Length: 11,950 mm x Width: 2,550 mm x Height: 3,400 mm * German vehicle - German vehicle registration document - Sold on behalf of the customer - * Subject to errors, misprints and prior sale - Available immediately - Dodsyav R Dspfx Apwjkl * Please arrange an appointment for a viewing and test drive * Contact person: Andreas Vogel * ATTENTION - Vehicles are stored outside the premises - Please inquire about the exact location - ATTENTION -

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm swing diameter: in Kröpfung: 560 mm throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 tailstock quill stroke: 180 mm total power requirement: 4,1 kW Weight approx.: 1,2 t Djdpfx Aovav Sdjpwokl dimension machine xH: 2,4 x 1,0 x 1,7 m Die Drehmaschine verfügt über keinen Eilgang. Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *

Condition: as good as new (ex-display), Year of construction: 2026, Pressure washer PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Feed rate: 13-42 l/min. - Engine: Kohler Stage V Diesel 35PS/26kW, 3400 1-min - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg Dedpfxjfdzy Uj Apwokl - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces industrial wheels 350mm - Electric starter - Operating hours counter - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Easy Power L D 13/700 | 13 l/min. 700 bar

Condition: excellent (used), Weiss Model: WK3-340/40 Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Test Chamber Dimensions: Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum Temperature: –42°C Maximum Temperature: +180°C Dkodpfxsygv U No Apwsl Temperature Change Rate, Cooling: 4 K/min Temperature Change Rate, Heating: 3.2 K/min Temperature Deviation Over Time: ± 0.1 to ± 0.5 K Temperature Uniformity Spatially: ± 0.5 to ±1.5 K Climate Testing: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% RH Temperature Deviation Over Time: ± 0.1 to ± 0.3 K Temperature Uniformity Spatially: ± 0.5 to ± 1 K Humidity Deviation Over Time: ± 1 to ± 3 % RH Halogen Lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 4.1 kW, Rated Current: 14 A Refrigerant: R-404A Weight: approx. 515 kg For your security as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications reserved!) Further questions can be answered by phone.

Condition: excellent (used), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Temperature test specifications: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Climatic test specifications: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1% to ± 3% r.h. Max. heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following points are checked and carried out on all our chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. If needed, fresh filling with legally compliant refrigerant 3. Leak check with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) Dsdjygutwspfx Apwjkl (Subject to prior sale, changes and errors in technical data and specifications reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Dodpjyguh Isfx Apwskl Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement Djdpfx Asf Axn Aspwskl - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 6,400 h, load capacity: 4,500 kg, lifting height: 3,700 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: TOYOTA, gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,100 mm, fork length: 1,400 mm, fork width: 130 mm, fork thickness: 60 mm, tire condition: 50 %, front tire type: superelastic tires (black), front tire size: 300-15, rear tire type: superelastic tires (black), rear tire size: 7.00-12, overall weight: 12,176 kg, empty load weight: 7,676 kg, total height: 2,300 mm, total length: 3,050 mm, total width: 1,400 mm, color: yellow, Equipment: cabin, lighting, pallet forks, trailer coupling, 🔍 Looking for a Reliable Forklift? We Are Industry Experts! We specialize in selling high-quality forklifts, offering tested machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! 🚜💼 🔥 In this listing, we present: 🚀 COUNTERBALANCE FORKLIFT - TOYOTA - 42-4FD40 - DUPLEX 3700mm 📏 - Year 2011 🏷️ - 6117MTH ⏳ - DIESEL ⛽ - CONDITION 5/5 🌟 This forklift is in excellent technical condition, ready for immediate use. ⚙️🔧 📌 Key Features and Technical Data: 📍 Model: TOYOTA 42-4FD40 📍 Year of manufacture: 2011 🏗️ 📍 Lifting capacity: 4500 kg 🏋️‍♂️ 📍 Operating hours: 6117 MTH ⏱️ 📍 Mast type: Duplex 🚜 📍 Lifting height: 3700 mm 📏 📍 Drive type: Diesel ⛽ 📍 Load center: 600 mm 🎯 📍 Engine manufacturer: Toyota ⚙️ 📍 Power: 75 HP 🔥 📍 Total weight: 7676 kg ⚖️ 📍 Tires: Solid, Superelastic, in good condition 🛞 📍 Front tires: Superelastic - 300-15 - 50% tread 🔄 📍 Rear tire: Superelastic - 7.00-12 - 50% tread 🔄 📍 Overall height (collapsed mast): 2500 mm 📐 📍 Technical condition: Fault-free, after a service inspection 🛠️ 📍 Visual condition: Very good 👌 📍 Fork length: 1400 mm 🔩 📍 Overall height: 2300 mm 📊 📍 Total length: 3050 mm 📏 📍 Total width: 1400 mm 📐 📍 Positioner width: 1100 mm 🔧 🎯 Equipment Included: 💡Lighting 🔧 Adjustable boom 🦾 Pallet forks This forklift is the perfect solution for industries that require efficient transport of heavy loads in demanding environments, such as construction 🏗️, logistics 🚛, and manufacturing 🏭. Thanks to its powerful diesel engine ⛽, it provides high performance, durability, and reliability, making it ideal for both indoor warehouses 🏢 and outdoor operations 🌳. 🚀 Additional Features: ✔ Strong and efficient diesel engine 🔥 for demanding applications ✔ Comfortable operator cabin 🛋️ with ergonomic controls ✔ High reliability in intensive use 🔝 ✔ Excellent performance on rough terrain and in outdoor conditions 🌍 Designed for heavy-duty operations, this forklift ensures precise maneuvering, high lifting capacity, and optimal warehouse efficiency 📦. 🛠️ Condition: ✅ Fully functional ✅ Regularly serviced ✅ Ready for immediate work! 🚛💨 📦 We offer transport across Europe 🌍 and provide a FREE initial inspection 🆓! 💰 Pricing & Formalities: 💳 We provide full support for financing options, including quick leasing and credit approvals 💰, even for new businesses 🚀 or companies in challenging financial situations. Dedpoy Eriujfx Apwjkl ✔ Leasing decision in just 2 hours! ⏳ ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & start-up program for new businesses 🚀 ✔ We are an authorized supplier for most leasing companies 🏦 ⚡ FAST / SIMPLE / AFFORDABLE FINANCING 💼

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized total length: approx. 200 mm total width: approx. 80 mm opening dimension: approx. 42 x 37 mm (WxH) for rectangular tube: 40 x 35 mm hole spacing: approx. 50 mm number of drill holes: approx. 2 pieces drill holeØ: approx. 9 mm material thickness: approx. 3,00 mm Dksdpfspbcfgox Apwsl weight/pc.: 0,320 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Included in the scope of delivery: 01x rectangular tube, used Material color: orange Total length: approx. 1,980 mm Hole center-to-center: approx. 1,935 mm Profile dimensions: approx. 52 x 42 mm (W x H) Djdpsw N Dx Ujfx Apwjkl Material thickness: approx. 2.00 mm Bore hole Ø: 9 mm Weight: 5.04 kg | each General information about the item: This item is offered for collection only. Any additional transport or shipping is subject to extra costs, which can be quoted separately depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2449-01, grinding width: 1,350 mm, grinding height: 150 mm, feed rate X-axis: 12 m/min, grinding wheel diameter: 1,380 mm, TECHNICAL DETAILS Workpiece dimensions (length x width) min.: 30 x 30 mm Workpiece dimensions (width x height) max.: 1,350 x 150 mm Abrasive belt dimensions: 1,380 x 1,900 mm Disk diameter: 1,380 mm Abrasive belt unit speed: 8–22 m/s Disk unit speed: 10–22 m/s Feed rate (frequency-controlled): 2–12 m/min MACHINE DETAILS Electrical specifications Feed motor (frequency-controlled): 2.6 kW Abrasive belt (W): 18.5 kW Disk (RD): 12.9 kW Electrical connections: 400 V Dkedpfxsyx Hhxs Apwsl Frequency: 50 Hz Control current: 110 A EQUIPMENT Disk unit (RD) with abrasive fleece disc 2 abrasive belt units (W) placed before and after the disk unit

Condition: used, Year of construction: 2009, machine/vehicle number: PR22, Used injection molding machine H160 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow.Manufacturer: Husky Injection Molding SystemsModel: H160 RS45/42Year: 2009Application: Cap/closure molding for beverage packagingMold cavitation: 24 cavitiesClosure specification: 29/25 mm, Free Start CapNominal part weight: 1.20 g (cap)Clamp force: 160 tonsElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 101 ALargest motor load: 42 ALargest heat load: 31 AShort-circuit current rating (SCCR): 10 kAIncluded equipment: Altanium heater controller, mold dehumidifier, hopper loader, color mixer unit, available spare partsAdvanced Automation & Control SystemsThe machine is equipped with an Altanium heater controller to deliver precise thermal management across the hot runner zones. This tight temperature control promotes uniform melt flow, faster startups, and reduced scrap, vital for thin-wall cap molding. The industrial control panel supports a 3-phase + neutral + protective earth electrical system, with clearly defined load ratings for motors and heating circuits to facilitate safe integration and predictable operation.Precision heater control with Altanium technologyClearly rated electrical distribution for motors and heatersStable process conditions for consistent cap qualityDesigned for quick setup and repeatable mold changeoversProduction Line Integration CapabilitiesThis unit integrates seamlessly into cap and closure production cells serving a used bottling line or standalone cap manufacturing operations. It can feed downstream systems such as vision inspection, lining/printing, and bulk handling for PET bottle closures. The 29/25 mm specification aligns with common beverage packaging neck finishes, supporting high-throughput operations in industrial packaging environments.Standalone or inline operation with downstream handlingCompatible with PET bottle packaging for beverage productionAuxiliaries included to stabilize material handling and color dosingMachine Condition & Maintenance HistoryThe machine is indicated as still in production, reflecting ongoing operational status and functional readiness. The inclusion of a comprehensive set of available spares and auxiliary units supports routine maintenance, uptime, and rapid troubleshooting typical of second hand i... Dkedpfxoyhbdxo Apwol

Condition: excellent (used), 1 x Butcher Boy 42 Mixer grinder. Dkodpfx Aex Swyxopwol

Year of construction: 2025, condition: ready for operation (used), functionality: fully functional, overall weight: 700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,500 mm, working length: 2,500 mm, machine/vehicle number: 0100-0149-2024, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Working length: 2,500 mm Djdpeym Di Isfx Apwjkl MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,100 x 1,500 mm Weight: 700 kg EQUIPMENT Suitable for flat material External reference: Lot 15 / Blickle

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Dsdpeym A E Isfx Apwjkl Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Condition: good (used), Year of construction: 1980, Pick-off devices for backworking on automatic lathes Schütte - Pittler 1X for up to 36 mm 1 X for up to 42 mm 1X for up to 50 mm Djdpfotthkdsx Apwskl 1X shaping head Complete with base plate and drive shaft .

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Dkjdpfjq Tp H Hjx Apwjl Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine!

Condition: excellent (used), Year of construction: 2023, tube diameter 42.0 x 3.0 STAHL mm tube diameter 30.0 x 2.0 EDELST mm Dksdpfx Apjx U El Iowjl bending angle max. 180 ° bending radius max. 100 mm bending speed 2.0 U/min. Control NC voltage 400 V total power requirement 0.55 kW weight of the machine ca. 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless * up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base

Condition: new, Ring profile bending machine Ostas OPK 42 Incl. standard roller set steel Motorized ring bending machine horizontal and vertical applicable with 2 driven rolls lower rolls motor driven rollers are hardened manual feed via upper roller left/right rotation by means of foot pedal shaft-Ø 50 mm roller-Ø top 158 mm roller-Ø bottom 158 mm speed 4,4 m/min Motor power 0,75 kW Electrical connection 400 V Dkodpfx Apsgw Hmqswsl According to CE standard Weight 380 kg According to CE standard

Condition: excellent (used), Year of construction: 2013, Band saw, Semi-automatic saw, Metal saw, Metal band saw, Frame metal saw Toptech / Optimum GB 4240, Used machine Dksdpem Akwzjfx Apwol Manufacturer: Toptech / Optimum Type: GB 4240 Year/month of manufacture: 2013/06 Inclusion dimensions: 2200 x 1100 x 2000 mm Electrical data: 400 V / 50 Hz / 4 kW Tape size: 34 x 11 x 4320 mm Belt speed: 19-86 m/min - Hydraulic vise - Adjustable feed Material size: 400 x 400 mm