Used Terex Gth 4013 for sale (303)

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Iajdpsywd Akofx Apnjt Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Ijdpjfifbbjfx Apnsat Freight costs on request

Condition: new, Year of construction: 2025, Available in following capacities: 1100 x 4/1100 x 5/1100 x 6 mm 1370 x 4/1370 x 5/1370 x 6 mm 1600 x 4/1600 x 5/1600 x 6 mm 2100 x 4 2600 x 4 mm Iaedpfx Aogu N E Depnet 3100 x 4 mm Standard features: -NC controlled backgauge 750 mm with recirculating ball spindles -NC controller including cutting counter -Single cut, continuous cut and inching mode changeover -mobile foot switch with EMERGENCY STOP Angle stop on the left side with T-track -Table extension -Roller balls in the table -manual cutting gap adjustment from the front -Cutting line lighting - All-steel knife 2-edged - Sheet metal hold-down device with hard rubber strip to protect polished sheets -Light curtain on the back of the machine instead of a safety grille (CE) -Foldable front security grille (CE) -Optical function display on the front of the machine -CE conformity -2 years full guarantee -3 years on engine and gearbox Optional accessories: -Adjustable angle stop with degree scale and mm graduation -pneumatic sheet metal holder -ELGO 9521 NC controller -Sheet ejection to the front - Sheet ejection to the front including a pneumatic sheet holding system (optional sheet ejection to the front or back over the entire cutting length with NC controller FUJI touchscreen (return to sender) -Table extension with tilt stop and T-slots -Special knife for VA steels -Special color on customer request

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Iasdpeyz Rvxjfx Apnot Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: used, total height: 4,050 mm, load per truss pair (max.): 3,000 kg, shelf length: 67,300 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 67,300 mm Number of bays per rack row: 24 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 216 pcs. Total pallet spaces: 216 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 25x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: 100 x 65 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 4,050 mm high 1,100 mm deep 96x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 192x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 100x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 50x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates Iedpfsr Epl Sex Apnjat with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, total height: 4,050 mm, load per truss pair (max.): 3,000 kg, shelf length: 16,900 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 16,900 mm Number of bays per rack row: 06 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 54 pcs. Total pallet spaces: 54 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 07x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Iodpfx Apjr Epmdonjat Profile dimensions: 100 x 65 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled ( bolted framework ) 4,050 mm high 1,100 mm deep 24x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 130 x 50 mm Beam type: PNB 0413 S355MC Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of beams 3,000 kg with evenly distributed load 48x locking pins, new Version: completely galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, clear span: 994 mm, total height: 1,530 mm, shelf length: 1,056 mm, Technical data for crate racking: Racking system: SSI Schäfer Type: R3000 Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 1,056 mm Number of bays / shelf row: 01 pcs. á 994 mm Number of levels plus base level: 07 pcs. The scope of delivery includes: 02x shelf uprights, second choice Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. cross and diagonal braces The uprights are unassembled 1,534 mm high 300 mm deep 07x shelves, II. choice Material color: light silver lacquered Type designation: ZB4313L Dimensions: 994 x 300 x 30 mm Weight / unit: approx. 2.64 kg Max. load per shelf with Iasdporm Iclefx Apnet evenly distributed load: 100 kg 01x Cross bracing, II. choice Type designation: KV31013 Material color: sendzimir galvanized 08x Open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Type: LF 322 Color: green (various) Design: Recessed grip on the back Material: Polypropylene External dimensions (LxWxH): approx. 434 x 209 x 200 mm Inner dimensions (LxW): approx. 291 x 181 mm Weight per unit: 0.78 kg 08x Open fronted storage box, second choice (new) Manufacturer: SSI Schäfer Type: LF 351 ZW Color: green (various) Design: recessed grip in the front Material: Polypropylene External dimensions (LxWxH): approx. 348 x 470 x 145 mm Inner dimensions (LxW): approx. 268 x 442 mm Weight per unit: 1.04 kg 01x load plate with details of bay and compartment loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Remark: - This is a II. Wahl product, new and unused. II. Choice means that there may be dust deposits, minimal scratches or soiling may be present. - The material color of the boxes may differ from the material may differ in color from the material shown in the picture. General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), total length: 3,835 mm, Technical Data for Steel Beam: Manufacturer: Stow Type: Pal Rack NS Iajdpfx Aew Niwvopnet Scope of delivery includes: 01x steel beam, used Material color: orange Box section: 100 x 50 mm Bracket: 4 HK (hooks) Total length: 3,835 mm Note: A plate has been welded onto the steel beam at a length between 2,700 - 2,800 mm. (Dimensions: approx. 200 x 110 x 50 mm (LxWxH)) As this is used equipment, scratches, damage, welds or traces of rust may be present! General information about the item: This item is offered for collection only. Transportation or shipping beyond this point will incur additional costs, which can be quoted separately depending on the delivery location and order volume.

Condition: as good as new (ex-display), Technical data for the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-2.0 The scope of delivery includes: 01x CS Sigma profile, second choice Material color: sendzimir galvanized Total length: approx. 2,294 mm CS Sigma profile: approx. 300x75x15 mm Material thickness: approx. 2.00 mm Weight / running meter: approx. 6.84 kg Weight / pc.: approx. 15.69 kg Remark: Iodjqx Nr Ejpfx Apnjat The profiles are offered as II. choice and may show have slight soiling ( dust ), which can be easily easy to remove. General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x depth bar, used Shelving system: SSI Schäfer Material color: RAL 5010 blue Total length: approx. 1,065 mm f. Upright depth: approx. 1,050 mm Clear span: approx. 946 mm Profile dimensions: U 50 x 50 x 3.00 mm Cross beam support: approx. 54 mm Unit weight: approx. 3.75 kg The depth bar can be used for the following traverse profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm Box profile widths: - 40 mm - 50 mm General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Iodpfx Asrp Eb Tspnsat

Condition: good (used), clear span: 1,800 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 9,540 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 9,540 mm Number of bays per row of shelves: 05 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 100 pcs. Total pallet spaces: 100 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 06x upright protectors, used Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 90x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg 45x fitted shelving, second-hand Design: with notches Material color: hot-dip galvanized Total depth: approx. 1,060 mm (bearing bar direction) for upright depth: approx. 1,050 mm Iasdpfxetyyr Ss Apnst Internal depth: approx. 1,056 mm Total width: approx. 1,780 mm (crossbar direction) Support bar spacing: 28|1.50 mm Crossbar support: approx. 58 mm Frame height: approx. 44 mm Mesh width: approx. 33 x 33 mm Weight per unit: approx. 33.310 kg Internal designation: GR-76 180x locking pin, used Material color: sendzimir galvanized For securing the side rails against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, clear span: 1,800 mm, total width: 1,050 mm, total height: 12,100 mm, load per truss pair (max.): 1,250 kg, shelf length: 11,430 mm, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11,430 mm Number of bays per row of shelves: 06 pcs. 1,800 mm each Number of levels plus floor level: 09 pcs. Technical data on volume: Pallet spaces per bay: 20 pcs. Pallet spaces per rack row: 120 pcs. Total pallet spaces: 120 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 07x pallet rack uprights, used Material color: sendzimir galvanized Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. Max. bay load: 11,250 kg With buckling height: 1,000 mm (At least 5 bays / row of shelves) Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 12,100 mm high 1,050 mm deep 07x upright protectors, used Iasdpjtznl Iofx Apnet Material color: yellow Total height: approx. 750 mm Total width: approx. 99 mm Inner width: approx. 91 mm Total depth: approx. 60 mm Leg dimensions: approx. 75 x 75 mm Material thickness: approx. 3 | 4 mm 108x Pallet rack cross member, used Material color: RAL 5010 gentian blue IPE profile: 80 x 46 mm Beam type: TRV1-180-08-l Clear width: 1,800 mm Bracket: 4 HK (hooks) Max. load per truss pair 2,800 kg, with evenly distributed load Note: Due to the shelf constellation results in a reduced shelf load per pair of pair of beams of 1,250 kg 216x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 28x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x shim plate, used Version: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x Locking bracket, used Material color: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "B" approx. 63 mm Support surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2.330 kg General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. depending on the place of delivery or scope of delivery. Iodpfxerfx Hzj Apnjat

Year of construction: 2026, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage Iedpfx Apeidmp Tjnjat • Pneumatic stop clamping with high holding power • digital actual length display in the working area • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Year of construction: 2026, condition: new, The robust manual length stop MD 100 d enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power. • raise and lower manual arm • digital position display with a resolution of 0.1 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever Iedpfeidmppsx Apnjat -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 2026, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials Iodpsidlpijfx Apnsat • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 2026, condition: new, The manual length stop with hand wheel and electronic dimension display MD 50 h is ideal for frequently changing section lengths and for stopping long materials. A hand crank enables the carriage to be moved quickly and precisely. Iodeidln Topfx Apnjat

Year of construction: 2026, condition: new, With our manual length stop MD 50 d, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Iaodpfxjidln Ns Apnet

Year of construction: 2026, condition: new, With our manual length stop MD 50 m, we offer you an inexpensive length stop that is extremely easy to use in order to increase the productivity and quality of your production. It is quickly brought into position by the user and securely clamped there using a hand lever. The length is measured using an easy-to-read measuring tape with mm graduation and vernier. Existing machines / roller conveyors can be retrofitted at any time. Ijdpfxoidln Es Apnjat

Year of construction: 2026, condition: new, The PD 100 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Trolley with 12 ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m • Steel guide rail with precision toothed rack • Steel carrier profile as dirt protection • Stop arm with spring damping • Additional mountable stop extension l = 200 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.6 m • Left or right hand versions available • Accesories: -Arm retraction with impact damping via pneumatic cylinder Iasdpfx Asfv T Nmepnot -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors on request It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, The PD 50 e length stop with servo motor drive has a modern control positioning device that ensures that the carriage holds the material in the desired position even under load. The control provides information in three display fields about the actual value, the target value and the number of pieces to be processed (option). Motorized retraction of the carriage is possible. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Positioning control for automatic positioning • Possibility of positioning according to absolute or incremental dimensions • easy-to-read LED display for nominal size, actual size and quantity (option) • Carriage with DC servo motor and encoder • Carriage with multiple ball bearings • Control positioning device • Positioning accuracy 0.1 mm/m Iasdpefv T Dwofx Apnjt • Motorized clearance function • Steel guide rail with precision rack • Multi-adjustable stop arm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Accesories: -Stop arm with spring damping -Arm retraction with impact damping via pneumatic cylinder -Piece counter for number of pieces/cuts made -programmable NC control with 3000 memory locations -Different material roller conveyors (e.g. roller conveyor width 290 mm or 407 mm etc.) It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2026, condition: new, AUTOPOS – Motorized Length Stop for Precise Positioning The motorized length stop AUTOPOS is designed for material weights of up to 150 kg/m, making it ideal for use with profiles and solid materials made of aluminum. Especially suitable for aluminum processing, with a roller width of 300 mm, for use with crosscut saws and under-table saws. Product features: ✔ Plastic roller diameter: Ø40 mm ✔ Roller width: 300 mm ✔ Load capacity up to 70 kg/m ✔ Height adjustable from 800 to 1050 mm ✔ Measuring accuracy: 0.1 mm Iajdpfxepa Nzko Apnjt ✔ Program with 20 memory slots for jobs ✔ Motor power: 0.16 HP ✔ Automatic positioning with max. speed of 18 m/min ✔ Slow movement at 0.6 m/min Available variants: AUTOPOS-3 – Measuring length 3000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-4 – Measuring length 4000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-6 – Measuring length 6000 mm, incl. job memory for 20 operations & roller conveyor AUTOPOS-8 – Measuring length 8000 mm, available on request Perfect for precise aluminum processing with high repeat accuracy and user-friendly operation. We look forward to hearing from you! Plantec Maschinen GmbH

Year of construction: 1985, condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm coil weight: 6 t mandrel Ø: 508 mm Iasdpfsnfu Icox Apnjt No. of slits: max. 9

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm coil weight: 40 t coil ID: 508/610 mm Iaodpfx Aoqw Aacjpnjt

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm Iodpfsqw Akmex Apneat strip thickness: 3 mm coil weight: 10 t