Used Transnorm Ts 1500-100 for sale (29,906)

Condition: used, mileage: 1,001 km, first registration: 01/1970, fuel type: gasoline, empty load weight: 500 kg, maximum load weight: 200 kg, overall weight: 700 kg, tire size: 5,60-15/4PR, color: red, driver cabin: other, gearing type: other, total length: 1,450 mm, total width: 1,550 mm, Year of construction: 1970, Vehicle location: Bovenden, Itodpei Rncgjfx Agxsg Superstructure: Light foam generator LG200/1B 700 kg total weight, adjustable drawbar, water flow 100ltr/min ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, machine/vehicle number: dd98a7658922be8f2e25bcadb, empty load weight: 2 kg, maximum load weight: 8 kg, overall weight: 10 kg, axle configuration: 2 axles, tire size: 235/75 r 17,5, Further information Chassis central axle trailer low bed Iodpfx Agji Ri Eboxjtg Fine-grained steel welded construction Telescopic front support leg Telescopic rear support 2 wheel chocks with holder Mudguards made of sheet steel over both wheels Towing device central axle trailer Tow bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, TTS bridge Low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor Bridge length 4500 mmTub at the front and sides with Load-Lock profile for attaching tensioning straps (8 straps at the front, 12 straps on each side) Note: Slight floor undulation possible due to welding distortion! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. 2 additional pairs of lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways with grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame RAL 3002 carmine red Hot-dip galvanized drive-on ramps Attention: Archive pictures!

Condition: used, operating hours: 6,235 h, machine/vehicle number: 169, mileage: 48,250 km, color: orange, First registration 08/1995 Itodpfsiuludsx Agxeg permissible total weight 4,000 kg Errors excepted

Condition: good (used), Year of construction: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Main spindle Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Tool stations: 6 + 6 Tool interface: Capto Iedpfjwxahfox Agxotg Tailstock Quill diameter: 85 mm Quill taper: MK 4 Quill stroke: 70 mm Tailstock traverse: 520 mm Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Chip conveyor Coolant pump Tool measurement system

Condition: good (used), Double side grinder for carbide saws VOLLMER model Finimat DUO TS 1000 Itjdpfx Asvgfifsgxog

Condition: good (used), Year of construction: 1996, machine/vehicle number: T1000214, Manufacturer: Tripet Model: TST 100 (CNC) Machine Type: Internal Cylindrical Grinding Machine Year of Manufacture: approx. 2001–1993 (depending on specific machine) Weight: approx. 3,500 kg 📊 Machining / Grinding Data Max. Internal Grinding Diameter: approx. 0.5 – 50 mm Max. Grinding Length: approx. 100 mm Max. Grinding Depth: approx. 100 mm Workpiece Outer Diameter (reference): up to approx. 100 mm Workpiece Spindle (B-axis) – max. load: 25 kg Workpiece Spindle Speed: approx. 45 – 1,600 rpm Roundness Accuracy: < 0.0005 mm ⚙️ Axes & Movements Z-axis (Axial Movement): • Travel: approx. 350 mm • Drive: Indramat AC motor • Feed rate: 0 – 9 m/min • Resolution: 0.0005 mm U-axis (Radial Workpiece Movement): approx. 100 mm X-axis (Radial Grinding Head): approx. 50 mm B-axis (Swivel of Surface Grinding Headstock): manual −30° / +60° 🌀 Spindle Data Grinding Spindle (Standard): Type: Fischer HJN 1028 Diameter: approx. 100 mm Itjdpfx Aeym Ttpsgxeg Max. Speed: approx. 28,000 rpm Drive Power: approx. 3 kW Operating Range: approx. 2,000 – 6,000 rpm 🖥️ Control System CNC Control, depending on version: • TRIPET NUM 750 or Brüsch TPS 3000 🔧 Additional Components Hydraulic Unit: • Pump 2.2 kW, Pressure approx. 35 bar, Max. flow 20 l/min • Tank approx. 60 l (self-regulating pump) Coolant System: • Pump 0.27 kW • Pressure approx. 2 bar, Flow approx. 12 l/min • Tank approx. 130 l

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Specifications Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm Isdpjwp Dn Dofx Agxstg T dimension: 22 mm Number of T-slotted sides: 2 Dimensions (approx. estimate) Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details.

Condition: used, Year of construction: 2012, Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: Itodpfx Agotp Tv Tsxog SEW Eurodrive / Movimot frequency inverter Supports Side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, KRONES AG Monoblock (with Sauerstein SD 1500/1100/950 unit and KRONES cooling device Itjdpfox N Utdox Agxjg Manufacturer KRONES AG – Neutraubling, Germany Type Stainless-steel guarded industrial monoblock (in-line integrated unit) with process and cooling auxiliaries Industrial Applications KRONES in-line unit for automated packaging environments requiring a protected enclosure, continuous conveyor operation, and integrated auxiliaries. The configuration shown includes a Sauerstein air unit and a KRONES cooling device for thermal control of integrated equipment/cabinets. Main Technical Specifications Air unit (Sauerstein nameplate) - Brand: Sauerstein - Type: SD 1500/1100/950 - Reference (Kom.): 10.462 - Year (Baujahr): 01/10 Cooling device (KRONES nameplate – Kühlergerät) - Part-No: Serial-No: M6530292550 - Supply: 230 V, 50/60 Hz, 2~N - Rated / start current: 1.5 A / 3.2 A - Power input: 315 W - Cooling capacity: 320 W - Refrigerant: R134a, 96 g - Protection rating: IP54 / IP24 In/Out - Max pressure: PS35 / PO30 bar - Year: Fuse: 6 A T - Operating range (min./max.): 20 °C – 55 °C - Internal minimum setpoint: 35 °C - Weight: 13 kg - Manufacturing: Malta (European Union) - Markings: CE, cRUus Machine Usage This KRONES monoblock is an in-line integrated unit designed for industrial operation within a guarded enclosure. The identified auxiliaries provide process support functions, combining air handling via the Sauerstein module and dedicated cooling via the KRONES unit to maintain thermal stability of on-board equipment. Features / Differentiators - Guarded stainless-steel monoblock design suited for automated production areas. - Integrated KRONES cooling device with 320 W cooling capacity and R134a refrigerant, engineered for industrial duty (IP54). - Full traceability of auxiliaries through part numbers and serial numbers (Sauerstein SD 1500/1100/950, KRONES , M6530292550).

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: ILL, Carl Stahl Rotomax load turning device Load turner Payload capacity: 1 to 1000 kg Iedoxwd Iqspfx Agxotg Connection: 400V, 16A Item location: 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection by appointment

Condition: used, 120 x 2600mm sanding belt 950 x 270mm worktable with tilt Handwheel rise and fall to worktable Mitre fence for table End table for bobbin / shaped sanding 3kw sanding belt motor 0.4kw belt oscillation motor Isdsy H Itfepfx Agxstg

Year of construction: 2024, condition: used, General information Field of application: Grounds care Serial number: LCELV1ZD0R6000133 Itsdpfjtzixpsx Agxog Technical information Power: 52 kW (71 HP) Type of fuel: Petrol Weights Empty weight: 870 kg Carrying capacity: 1.550 kg GVW: 2.420 kg Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.77x1.62x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. Iodpfx Agsrivxcexjtg The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized rear stop up to 1000 mm with fine adjustment via handwheel Crown angle adjustment knife sharpened operation manual Itodpfxsqmvlrj Agxsg Weight: approx. 1400 kg

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Ijdjxzf Dzjpfx Agxetg Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Itedpfx Agsxyw Sbexog Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN Iedpfxoxt Hn Sj Agxjtg AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: good (used), Belt conveyor, Transnorm, approx. 0.81m long - second-hand - : Price ex location (net): only 695.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos12 Ijdpsu Ez Acjfx Agxstg Manufacturer: Transnorm Type: unknown Year of construction: unknown Element length: 81cm Element width: approx. 50cm Belt width: approx. 40cm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2007, Belt conveyor, Transnorm, approx. 1m long - second-hand - : Price ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos16 Manufacturer: Transnorm Type: TS 1200 Year of construction: 2007 Element length: 1000mm Element width: approx. 50cm Belt width: approx. 40cm Belt type: KT 217 Belt length: 2075mm Motor: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony Isdpfsu Ez Eqex Agxetg

Condition: good (used), Year of construction: 2004, Belt conveyor, Transnorm, approx. 1.35m long, approx. 1m wide - second-hand - Itjdpfxou Ez Ews Agxog Price ex location (net): only 995.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos34 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of construction: 2004 Length: 1.350mm Nominal width: approx. 1,000mm Belt type: FNI 12E Belt length: 2785mm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony

Condition: good (used), approx. 3x belt conveyor, Transnorm, approx. 0.80m long - second-hand - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos17+19+78 Manufacturer: Transnorm Type: unknown Year of construction: unknown Element length: 80cm Element width: approx. 60cm Belt width: approx. 49cm Motor: SEW Condition: good Available immediately Itjdpju Ezzxjfx Agxjg Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Belt conveyor, Transnorm, approx. 0.80m long - second-hand - Itodju Ezz Eopfx Agxeg Price ex location (net): only 595.-€ incl. dismantling, packing and loading! Pos80 Manufacturer: Transnorm Type: unknown Year of construction: unknown Length: approx. 0,80m Belt width: approx. 47.5cm Element width: approx. 60cm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Belt conveyor, Transnorm, approx. 1.75m long - second-hand - Price ex location (net): only 795.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos77 Manufacturer: Transnorm Type: unknown Year of construction: unknown Length: approx. 1,75 Nominal width: 500mm Element width: approx. 60cm Engine: SEW Condition: good Available immediately Itedpju E Rrtjfx Agxog Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Belt conveyor, Transnorm, approx. 1.20m long - second-hand - Price ex location (net): only 695.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: Iedpfju E Ruhex Agxstg A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Item 79 Manufacturer: Transnorm Type: unknown Year of construction: unknown Length: approx. 1,20m Nominal width: 500mm Element width: approx. 60cm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Belt conveyor, Transnorm, approx. 1.20m long - second-hand - Itodpfxeu E Rwpj Agxsg Price ex location (net): only 695.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos85 Manufacturer: Transnorm Type: unknown Year of construction: unknown Length: approx. 1,20 Belt width: approx. 50cm Element width: approx. 60cm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later warehouse Frankenberg / Saxony