Used Transpak Tp 601 D for sale (47,263)

Condition: used, mileage: 640,500 km, first registration: 07/2019, fuel type: diesel, fuel: diesel, color: other, Year of construction: 2019, Axle 1: left7 mm right 7 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 8 mm right 8 8 mm Lodpfjx Ih H Ujx Aazsrt

Condition: used, first registration: 05/2020, Equipment: ABS, 2x fast-acting sliders, sliding roof, SAF Intradisk axles, tires 445/45R19.5, pallet stops on both sides, steel, quick-release mechanism at the front and rear, aluminum air tank, load securing rails along the entire length, vertical load beams, WITHOUT crossbeams, LED lighting, beverage transport certificate, XL. Ljdpfxjz Am Dxe Aazsrt

Condition: used, Year of construction: 2017, Excellent opportunity to acquire a well-maintained Bystronic BySprint Fiber 4020, equipped with a 6 kW fiber laser source and ByTrans Extended automatic loading and unloading system. Machine Highlights - Year of manufacture: 2017 - Laser power: 6 kW Fiber - Cutting hours: Approx. 2,539 hours - Working area: 4,000 x 2,000 mm - Automatic loading/unloading: ByTrans Extended - Control system: ByVision with 22" touchscreen - Dual shuttle table system for maximum productivity Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. Ledpfszw Nfnox Aazjrt It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Year of manufacture: 2017 * Laser power: 6 kW Fiber * Cutting hours: Approx. 2,539 hours * Working area: 4,000 x 2,000 mm * Automatic loading/unloading: ByTrans Extended * Control system: ByVision with 22" touchscreen

Condition: like new (used), mileage: 429,000 km, fuel type: diesel, Year of construction: 2021, IVECO DAILY 35-18, 3000cc engine, year 2021, Hi-Matic, refrigerated compartment 4.40 x 2.20 x H1.90, Zanotti refrigeration unit, suitable for road and mains power, LED headlights, automatic transmission, navigation system, tires with 80% tread, 429,000 km. On-site financing options available. Ljdpfozh Uy Sox Aazjrt

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, rotational speed (min.): 2,940 rpm, overall weight: 1,800 kg, Equipment: CE marking, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Ljdpfx Aszyx E Aeazert Maximum chip removal: approx. 8 mm Total connected load: approx. 26 kW Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Weight: approx. 1800 kg

Condition: good (used), mileage: 236,664 km, first registration: 05/2023, fuel type: electric, tire size: 235/60R18, axle configuration: 4x2, wheelbase: 2,990 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 3, total length: 5,030 mm, total width: 1,900 mm, total height: 1,990 mm, loading space length: 2,320 mm, loading space width: 1,730 mm, loading space height: 1,280 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - None - LED lamp Lodpfxjzyycis Aazort - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 748 kg, Tare weight: 2252 kg, Gross vehicle weight: 3000 kg, Unbraked towing capacity: 750 kg, Braked towing capacity, middle axle: 1000 kg, Tow hitch, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assist: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Heated mirrors, Type of lighting: LED lamp, Bluetooth, Fuel: electric, Type of transmission: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, ac automatic cruise control tow hitch carplay, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VXG-63-X Axle Configuration Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire size: 235/60R18; Tire tread depth left: 4 mm; Tire tread depth right: 3 mm Axle 2: Tire size: 255/55R18; Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 2,252 kg Payload: 748 kg GVWR: 3,000 kg Functional Loading area height: 62 cm Maintenance APK (Technical inspection): Valid until 05.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial Information Leasing price: 401 € per month (delivery van, 72 months); Ask for more information and conditions

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESTUN Automation, controller model: E21S, cutting angle (min.): 1.5 °, cutting angle (max.): 1.5 °, stroke rate (min.): 20 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 740 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge travel distance R-axis: 600 mm, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, overall weight: 3,800 kg, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, BRAND-NEW HYDRAULIC GUILLOTINE SHEAR 4 × 2500 E21S Controller and Laser Cutting-Line Guide The hydraulic guillotine shear is designed for accurate straight-line cutting of sheet metal and strips. It is suitable for steel, non-ferrous metals and other compatible materials. With a maximum cutting capacity of 4 mm and a working length of 2500 mm, it is an efficient solution for fabrication workshops and industrial production facilities. The machine combines a robust hydraulic system with a motorized back gauge and E21S controller, allowing quick and repeatable positioning. An illuminated laser guide clearly indicates the cutting line and helps the operator align the workpiece accurately before each cut. Hydraulic hold-downs secure the sheet along the entire cutting length. Ball transfer units integrated into the table make large sheets easier to position and help protect their surfaces during handling. Front support arms and a front gauge with measuring scale provide additional support and simplify repeat work. The segmented blade design allows an individual damaged section to be replaced instead of the complete blade, helping reduce maintenance costs. Adjustable blade clearance enables the machine to be set for different sheet thicknesses and materials. TECHNICAL DATA - Maximum sheet thickness: 4 mm - Maximum cutting length: 2500 mm - Blade rake angle: 1°30′ - Cutting frequency: 20 strokes/min - Back-gauge travel: 600 mm - Distance between side frames: 2650 mm - Blade length: 2550 mm - Table height: 740 mm - Motor power: 5.5 kW - Weight: 3800 kg - Dimensions (L × W × H): 3130 × 2030 × 1600 mm - Controller: E21S - Cutting-line guide: Laser STANDARD EQUIPMENT - Motorized back gauge - Ball-guided back-gauge system - Hydraulic sheet hold-downs along the full cutting length - Segmented, individually replaceable blades - Blade-gap adjustment - Ball transfer units on the worktable - Front material-support arms - Front gauge with measuring scale - Rear safety guard Lrjdpfxsyt E Aio Aazst - Front safety guard - Foot-control pedal - E21S controller - Illuminated laser cutting-line guide CONDITION, WARRANTY AND DOCUMENTATION - Brand-new machine - 12-month warranty - Warranty and post-warranty service - CE Declaration of Conformity - Operating and maintenance manual in English This guillotine shear offers a practical combination of cutting capacity, operator-friendly controls, reliable sheet positioning and safety equipment. Its compact design makes it suitable for both general fabrication and repeat production work. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a transport quotation. Please visit our website to view our other available metalworking machines.

Condition: like new (used), Year of construction: 2024, Ref: 11139 . 2024 Horizon BQ-500 PUR Ice Binder Latest model Horizon BQ binder - Like new condition! Only 68,500 books! Comprising: BQ-500 Ice binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction PUR spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Including tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr. Including accessories, tools & manuals. Ljdpfoz Elufsx Aazert

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 10,295 h, load capacity: 16,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,195 mm, power: 164 kW (222.98 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Lrodpfx Aaozwrguozjt Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Rear tire type: Pneumatic Description: Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, LED.

Condition: used, Year of construction: 2010, Losma Darwin 2000 D Dust Extraction Systems 5 units with pre-filter, 2 units with turbine only The systems are sold as is, see pictures. The systems were fully functional until dismantling. The systems are available immediately. The Darwin series is a range of centrifugal dust extractors for cleaning air containing oil-based mists, micro-mists, and vapors that are generated during the use of coolants (emulsions and neat oils). It can be used on all types of machine tools and in all machining processes. Lredpszwlvcsfx Aazet The Darwin series uses a double combination of filtration: dynamic (through the rotation of the centrifuge) and static (with the integrated post-filtration system) to guarantee high performance.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width 340mm - roller width 360mm - disc bore diameter 70mm - max disc diameter 315mm - max cutting height 180mm * from above - feed roller, toothed, pneumatically pressed - 2 rows of ejectors - 3 sliding, smooth pressure rollers - ejectors - roller with saws - 3 sliding, smooth pressure rollers - ejectors * from below - feed roller, toothed - track - roller with saws - track - stepless feed rate adjustment via frequency inverter - main motor 2x55kW - feed motor 4kW - electric lifting of the upper body up/down - electric adjustment of the rollers with saws - central lubrication - diameter of the dust extraction nozzle 2x150mm - dimensions L/W/H 2800x2400x1900mm - weight approx. 5000kg Ledpfozxqtvjx Aazort ADVANTAGES – Made in Italy – Two-roller – Ideal for large components – Multi-blade saw, used, very good condition Net price: 145900 PLN Net price: 33930 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control Lrjdozubtlepfx Aazst • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards. Lredpjycfw Eefx Aazet

Condition: used, functionality: fully functional, machine/vehicle number: ----, Year of construction: 2019, operating hours: 3,580 h, load capacity: 16,000 kg, lifting height: 4,600 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 3,120 mm, fork length: 2,400 mm, empty load weight: 24,500 kg, total length: 5,500 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Chassis number: ---- Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Triplex Transmission: ZF 3WG 161 Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 80 - 100% Lrsdjzwac Dspfx Aazot Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, heater, full cabin, full free lift.

Condition: used, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 07/2020, ANKA 3-horse trailer with living quarters and shower New vehicle Total weight: 3,500 kg Living quarters for 1-3 people, aluminum flooring, 2 beds, fully equipped living area, seating area, with shower, refrigerator, microwave, washbasin, opening window, electric heating, and more. Lsdozhd Swepfx Aazert Errors and changes reserved. * NET price possible. * Attractive leasing options available. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact: Richard Theurer, Andreas Theurer.

Condition: used, mileage: 217,000 km, power: 110 kW (149.56 HP), first registration: 09/2016, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, central locking, had accident, Equipment: Power steering * Partition * Central locking Climate control: Air conditioning ENGINE DAMAGE, ENGINE RUNS!!! Ledpfsz D Hh Djx Aazert FIXED PRICE!!!!!

Condition: new, Year of construction: 2026, Weights Empty weight: 3.700 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 33-50ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH40ST+ is availbale with 3 types of changeable side clamps! AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 33-50TON Weight: 3400 kg (without mounting cap) Working pressure: 250~ 270Bar Oil flow: 180-240 l/min Centrifugal Force : 1000kN Frequency: 2700 rpm Eccentric moment: 10 kgm AVH40ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile 40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: Lrodpfx Aoym Abveazst ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: used, Year of construction: 2016, Spiral mixer Diosna SP 120 D Lrjdpsz A Sb Hsfx Aazjt Dough capacity: 120 kg Flour capacity: 75 kg Timer control system Two timers Two speed settings Reverse operation Movable with locking mechanism

Condition: good (used), machine/vehicle number: 3440, Year of construction: 2013, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, total length: 5,700 mm, operation weight: 23,880 kg, additional equipment features: Centralized greasing system, NATO-socket, Dual tread, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Lrodpfx Aaoyuihlozet Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: used, mileage: 99,255 km, power: 90 kW (122.37 HP), first registration: 08/2021, fuel type: diesel, tire size: 215/60r17C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2021, Equipment: ABS, central locking, cruise control, electric window regulation, parking heater, power mirror, = Additional options and accessories = - Spare wheel - Speed limiter - Stability control - Alternating current - Toolbox Ledjzxlpfspfx Aazert = Additional information = Tire size: 215/60R17C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Rear axle: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Unladen weight: 1,845 kg Payload: 1,115 kg GVWR: 2,960 kg Damage: None

Condition: good (used), Year of construction: 2004, functionality: fully functional, VMC300 D with 4-axis capability. Lodpfx Aoz Ehp Esazert

Condition: used, mileage: 54,000 km, power: 107 kW (145.48 HP), first registration: 06/2010, fuel type: gasoline, overall weight: 3,500 kg, next inspection (TÜV): 07/2027, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 7, loading space length: 2,800 mm, Equipment: ABS, central locking, Buy online. Finance digitally. Get it delivered nationwide. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3533] The photos have been processed using AI and serve only as an example to illustrate the size and equipment of the vehicle. The vehicle is currently being prepared. The images will be updated. ---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optionally available: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German technical inspection and emissions test) * Nationwide delivery---- Special equipment: Metallic paint Additional equipment: 2nd battery, axle ratio i = 3.91:1, airbag for driver, audio system 6000 (radio/CD player), audio/radio remote control on the steering wheel, radio preparation, 2 loudspeakers, turn indicator integrated into the exterior mirror, tachometer, electronic brake force distribution (EBD), windows in the cargo/passenger compartment: - fixed, 1st row, left, windows in the cargo/passenger compartment: - fixed, 1st row, right, vehicle without fog lights, heating with recirculation, body/structure: flatbed, double cab, standard, body/structure: aluminum side panels, body/structure: double cab, headlight range adjustment, engine 2.3 L - 107 kW 16V catalytic converter, flatbed width 2000 mm, flatbed length 2450 mm, production facility: Otosan, wheelbase 3954 mm, wheel covers, mud flaps at the front, side protection strips, seat package 22: driver's seat (3-way adjustable) - passenger double seat, seat cover / upholstery: fabric, seats in the cab: driver's seat height-adjustable, seats in the cab: passenger double seat, seats in the cargo/passenger compartment: 3-seater bench, tinted glazing ---- Would you like to lease or finance? We offer attractive deals – even without a down payment! Please feel free to contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. Lrsdpfx Aasz D Rzbszjt All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are possible. The photos have been processed using AI and serve only as an example to illustrate the size and equipment of the vehicle. The binding condition of the vehicle is determined exclusively by the purchase contract on site or by written assurances.

Condition: used, New: Yes Applicable material: Manure Attachment suited for: Agricultural machines Lrsdpfx Aasycr Ttezst

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 17,582 h, load capacity: 16,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: duplex, construction height: 3,945 mm, power: 147 kW (199.86 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load centre: 1200 Fork width: 250 mm Fork thickness: 100 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tyre type: Pneumatic Rear tyre type: Pneumatic Description: Sideshifter, fork positioner, Lrsdpfx Aszwrgbjazjt Terminal-West quick-change system 3rd valve, 4th valve, rear work light, front work light, heater, full cab, air conditioning, LED,

Condition: good (used), machine/vehicle number: 2707, Year of construction: 2023, load capacity: 16,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,700 mm, total width: 2,560 mm, operation weight: 22,400 kg, additional equipment features: Centralized greasing system, Engine heater, Equipment: lighting, Kalmar DCG160-12 from Uniktruck Ledjyuhr Ajpfx Aazjrt Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20