Used Trio-Technik Separator With Disk for sale (12,330)

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,785 mm, travel distance Z-axis: 280 mm, overall weight: 5,500 kg, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 3 m/min, spindle motor power: 8,000 W, Equipment: documentation/manual, The machine worked until the end in Sweden at the moment it is undergoing a service inspection. It has two milling units Hodpfx Acjuzmyrerol

Condition: excellent (used), Year of construction: 2003, Conveyor belts Hodpfxouaczts Acrol MTF With 4x reder L. 2.0 meters W. 0.30 meters H. 1.05 meters

Condition: excellent (used), Year of construction: 2014, Conveyor Belts MFT Technik Type: GLD-LD 070 Year of manufacture: 2014 Length: 1.4 meters Hsdpfx Acjx I N Igorol Width: 0.30 meters Height: 1.1 meters

Condition: excellent (used), Year of construction: 2012, MTF Technology Year 2012 Hjdjgv Atyopfx Acrel L. 160 cm + 130cm W. 40 cm+30cm H. 50 cm

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Hjdpfx Acoun Nvborjl

Condition: new, Year of construction: 2024, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. Hedpfxeu Hz Tqs Acrol + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1670 242, Equipment: CE marking, documentation/manual, Fully functional Westfalia separator, all documents, tooling and cover hoist crane included. Last operational 12.2024. Hedpfx Acsw Icgborjl

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Hedpfxextvb Us Acrjl Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: good (used), Filling quantity: 35 kg Hsdpfx Acsgl Auxorjl

Condition: good (used), Arm design: 270 mm Hodpopy Dy Esfx Acrsl Power: 125 kVA

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned. Hjdpont Uc Rjfx Acrel

Condition: like new (used), Meat grinder with mixer AK RAMOON 32. Hjdpfx Aex Ndqfjcrsl

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Hedpfxsu Uth Hj Acrjl

Condition: good (used), Year of construction: 2010, functionality: fully functional, We are selling several dosing systems for liquid silicone of the brand Reinhardt - technik, model LSR 200 Modular, years 2004 to 2010. All units are operational and in good condition. Hsdsx A Sxzopfx Acrel

Condition: used, Log table with elevator and log scanner Rema Control Hodpfxeu Smq Sj Acrjl - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: good (used), 147 USED Internal Flour Silos - Stainless Steel. EXTERNAL DIMENSIONS (in cm): - height 200, - width 200, - length 200. Hsdsxdkx Njpfx Acrsl INTERNAL DIMENSIONS (in cm): - height 150, - width 192, - length 190. EQUIPMENT: - 2 stainless steel silos with a capacity of 3 tons each, - scale, hopper, - flour dosing computer. IMPORTANT: The silos' capacity can be increased to approximately 6-7 tons each. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: new, Machine type: Vacuum dough divider Model: VD 100-700 The dough dividing machine is the latest system of dough processing technology Hsdpfeuuclpex Acrel Cut the dough to the required weight without pressing and damaging it All surfaces that come in contact with the test are made of stainless steel Weight range: from 100gr to 700gr Capacity: 1800 - 2400 pieces per hour Dimensions: 1370/1780 x 650 x 1600 mm Weight: 420kg Electrical power: 1.75kW

Condition: new, Intermediate dough chamber Intermediate chamber for resting (rising) the test after its shaping They are characterized by high-quality workmanship and maximum reliability Also, all models are mobile Rest time: 4.5 minutes Capacity: 1800 - 2000 pcs / h Number of vessels: 154 Container capacity: 100 - 1500 gr Hodpfjuufr Sex Acrjl Dimensions: 1700 x 950 x 2200 mm Dough inlet height: 930 ± 20 Dough outlet height: 1050 ± 100 Electrical power: 0.55 kW Machine weight: 500 kg

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Hedpfx Acouzv Tzjrsl Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 2,880 mm, spindle motor power: 90,000 W, type of input current: three-phase, For sale: new compounding line with a real capacity of 300kg/h. The line includes hot and cold mixers, a twin-screw extruder (2 twin screw extruder) with two feeding points—at the start of the screw and from the side—suitable for high loading of dry substances. Features include a vacuum pump, hydraulic screen changer, vibro table, and storage silos for materials. The line can process powdered materials, hard materials, various grindings, mixtures, and granules of PP, PE, and PVC. It can produce high-quality masterbatch, fillers, and other products. Up to 85% dry matter content. The machine is practically brand new, only tested for a few hours. Hedpsx Uqyqefx Acrsl Control with frequency inverters. A set of spare parts, spare heaters, and spare screw segments is included. Possibility to test with your own materials.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Westafalia Separator SB 60-36 used in beverage industry, in excellent condition. Hedpoq U Dbdefx Acrsl

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm Hedpfsxdmgvjx Acrsl CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: used, Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function:Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hour Motor power:15 kW Electrics: 380V/ 50 Hz/ 3 Phase Hsdpfx Aeyc Rtfocrsl Bowl speed: 1450 rpm Tools Base PlateNew Control Panel New Water system ( Valves, pressure vessel, connections, etc.) Service Spare Parts : Dairy Machinery UK Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function: Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hour Motor power: 15 kW Bowl speed: 1450 rpm Service Spare Parts: Dairy Machinery UK

Condition: used, The SEITAL SPX SE05X cream separator is a machine used primarily in dairy processing to separate cream from milk. Here are some key features and information that are commonly associated with cream separators like this model: - Separation Process: Cream separators work on the principle of centrifugal force to separate cream from milk based on their different densities. - Capacity: The SE05X typically features a specific capacity for processing milk per hour, which is essential for both small-scale dairy farms and larger dairy operations. - Material: Most cream separators are made of high-quality stainless steel to ensure hygiene, durability, and easy cleaning. - Efficiency: The design usually maximizes the separation efficiency, allowing for the extraction of cream with a high fat content while minimizing the fat content in the skimmed milk. - Ease of Use: These machines are designed for ease of operation, requiring minimal manual interaction once set up. - Applications: Beyond separating cream from milk, they can also be used for other applications in the dairy industry, including buttermilk separation and processing of other liquids. - Maintenance: Regular cleaning and maintenance are essential to ensure optimal performance and longevity of the machine. Hedpfx Asxzxuaecrsl Manufacture: Seital Model: SE05X Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, MarelliGenerator Alternator Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use Low maintenance – no chemical batteries Hodswx H Hzjpfx Acrol