Used Vetter Ps5-4,5 for sale (471)

Condition: new, Year of construction: 2026, Cutting height 145 mm weight of the machine ca. 480 kg Ijdpfx Aceyk H Ubjfsti Motor output 5,5 kW

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 300 kg Itjdpfsvz H Aisx Acfji Total power requirement 5,5 kw

Condition: used, Tool presetting machine SOMET, type SPS 500 U Machine no. S1, Year of manufacture 1987 Table surface 545 x 1000 mm Travel ranges X = 500 mm, Y = 340 mm Width in the portal 550 mm Height table - lower edge of portal 250 mm - Longitudinal guide on the portal, right and left of the table - Adjustment via very fine lead screws with handwheel Itsdpsdzqrtofx Acfji - Quick adjustment via electrical release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 units of clamping devices for tool measurement - mounted on a base with storage compartment and drawer Space required L x W x H: 1100 x 700 x 1650 Weight 560 kg In good condition

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Iedpfxedzqpts Acfeti Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: electric, construction height: 2,150 mm, gearing type: automatic, fork length: 1,220 mm, overall weight: 2,500 kg, total height: 2,150 mm, total length: 2,400 mm, total width: 1,150 mm, color: orange, tire size: Reifen/Radstand: Vollgummibereifung, Vorderreifen: 650-10 mm, Hinterreifen: 500-8 mm,, Equipment: lighting, sideshift, LÖWE ELEKTRO Profi HLS 2000 Forklift Forklift, 2 tons, sideshift, with battery and charger (color may differ from picture). We offer 4-wheel and 3-wheel forklifts in the following versions: 1500 / 2000 / 2500 / 3000 / 3500 / 4000 / 5000 kg lifting capacity. Any configuration possible! Itsdpfx Acoubhz Usfsi Payment & Delivery: Secure! Looking to buy a forklift? You only pay upon handing over the goods for shipping! Shop risk-free. For further details, we are happy to assist you personally. Contact us any time by phone or email. Standard Equipment - 2000 kg lifting capacity - Height: 4500 mm, 2-stage mast (can be extended to 5500 mm upon request) - 72V with 6x100 Ah high-performance battery (other configurations available on request, e.g. higher capacity, lithium) - Intelligent battery charger 230V, quick charging system: fully charged in 8-10 hours (400V charger available on request) - Free lift: 1500 mm - Equipped with sideshift – conveniently controlled from the cab - Fork positioner available (automatic fork positioner from cab available on request) - Brushless system: less wear and sparking thanks to brushless motor. Designed for high efficiency and long service life - DC motors designed for high torque, dynamic applications, and precision - Twin hydraulic cylinders: improved fail-safety and higher performance - Gradeability (laden/unladen): 35% / 25% - Automatic electromagnetic parking brake for ramps or inclines - 1220 mm professional forks, extendable with attachment - Solid rubber tyres for heavy-duty operation - Digital battery status display - LED headlights and signal lights - Maintenance-easy system: open access to key components - Reinforced steel frame for increased safety and durability - Dimensions: L2400 x W1150 x H2150 mm* Optional Equipment - Automatic fork positioner - Extension to 6 m lift height* - Reduction to 3 m lift height - Extended forks (2.2 m) - Extended forks (2.5 m) - Driver’s cab - Rotating drum clamp - Spinner - Aluminium clamp - Telescopic tire clamp - Scrap grab - Splice-jaw scrap grab - Ejector - Brick clamp - Tire clamp A - Foam clamp - 400V High-performance charger for reduced charging time (3 hours), for LI-ION only - 80V lead-acid battery - Lithium-ion batteries in various configurations * For a lift height of 5.5 meters, minimum overall height changes to 2650 mm

Condition: used, Year of construction: 2007, x-travel 550 mm Iodexiy A Uopfx Acfoti y-travel 400 mm z-travel 400 mm Control INGERSOLL ANDRONIC

Condition: excellent (used), Plan B: Tilting trays with studs No dusting is required. Thanks to special studs on the trays, the dough pieces cannot stick. Tilting trays: 58.5 x 38.5 x 4.5 cm. Ijdpfx Acjghr Nnofjti

Condition: used, Year of construction: 1997, grinding diameter 600-750 mm grinding length 600 mm weight of the machine ca. 10 t dimensions of the machine ca. 5600x4600x3000 mm Retrofit 2019 Workpiece length: max. 600 m Workpiece diameter: max. 350 mm Workpiece weight: max. 200 kg Power supply: 400 V Frequency: 50 Hz Power consumption: max. 35 kVA Grinding wheel diameter: 600-750 mm Grinding wheel thickness: 100-280 mm Weight with flange: approx. 300 kg Itodoyat Hpspfx Acfsi Peripheral speed: 45 m/s max.

Condition: new, Airpress Aps 5,5KW oil compressor NEW COMPLETE. Screw compressor APS 7.5 Combi Dry X 10 bar 7.5 HP/5.5 kW 690 l/min 200 l machine NEW Weight (kg): 310.00 Length, Width, Height (cm): 140 x 60 x 143 Percentage ratio of work to rest per man-hour: 100/0 Engine power (hp / kW): 7.5 hp / 5.5 kW Motor energy class: IE2 Motor type: AC Drive: 1:1 direct drive Dryer: 230 V / 50 Hz / 1 Ph Compressed air tank: Yes Air tank capacity (l): 200 Output capacity (l/min): 690 Maximum pressure (bar): 10 Maximum effective capacity (l/min): 690 Maximum effective capacity (m³/h): 41.4 Output capacity (m3/h): 41.4 Sound level dB(A): 63 Sound level dB(A) (4 m): 43 Plug type: EU Refrigerant: Air Main air connection ("): 3/4 Internal Direct air connection ("): - Itedpfx Aeq D Dcgecfsi Oil-free: No Number of compression stages: 1 Starting: Y-∆ Power supply: 400 V / 50 Hz / 3 Ph Radiator: No Variable speed (IVR): No net price: 15500 zł gross price: 19065 zł

Condition: ready for operation (used), Format: 0.5-1l, max. output: 5000 cartons/h, with cap applicator and EURO-LINE cartoning machine, an on-site inspection is possible. Itjdpfxjrviq He Acfsi

Year of construction: 2008, condition: ready for operation (used), A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible. Iedou Ei Uajpfx Acfeti

Condition: used, Year of construction: 1998, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 500 mm, saw blade diameter: 500 mm, saw blade bore: 30 mm, - Italian-made TECHNICAL SPECIFICATIONS: Itjdpoym Ak Rsfx Acfei - motor power: 5.5 kW - maximum cutting height: 150 mm - maximum cutting width: 500 mm - blade speed: 2800 rpm - manual saw feed - two pawls - feeding table dimensions (L / W): 3000 x 540 mm - receiving table dimensions (L / W): 3000 x 540 mm - spindle diameter: 30 mm - extraction port diameter: 100 mm - machine dimensions (L / W / H): 630 x 160 x 190 cm - transport dimensions (L / W / H): 400 x 150 x 190 cm - weight: approx. 350 kg

Condition: used, Year of construction: 1993, CNC Lathe Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Chuck 500 mm, Itsdpfsyq R T Iex Acfoi many tools and jaws included Year of manufacture: 1993 Very good condition The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories.

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 145 mm, cutting width (max.): 510 mm, overall weight: 400 kg, extraction nozzle diameter: 150 mm, rotational speed (min.): 2,800 rpm, power: 5.5 kW (7.48 HP), STROMAB PS 50/F pendulum cross-cut saw, brand NEW Specification: • condition - new • engine power - 5.5 kW • blade diameter - 500 mm • engine shaft diameter - 30 mm • engine speed - 2,800 rpm • max cutting width - 510 mm • max cutting height - 145 mm • additional extension tables - 2 x 2 m • weight 400 kg • 2024/2025 year of manufacture Itodpfjrdwm Tjx Acfei • noise emission - 85.5 dB (A) • the machine meets CE standards Additional information: • tables visible in the photos included with the machine (2 x 2.0 m) • available within 7-10 working days • the price does not include VAT and transport costs

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank Iedefv Awhepfx Acfjti - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: new, Year of construction: 2026, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 Itodpfx Ajh Su Ipecfji optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. Ijdpfxjvlwh Do Acfsti - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste Itodpfxeiqxtbo Acfoi • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. If you're interested in our products, please contact us!

Condition: ready for operation (used), Year of construction: 2002, Vehicle description: Diesel side loader forklift JUMBO 50/12/45 Year of manufacture: 2002 According to the meter: 3,724 operating hours 5-ton lifting capacity 4.5-meter lifting height 1.2-meter fork length Selling price: EUR 21,950.00 net Itjdpfxeid R Dne Acfsi Affordable delivery also possible!

Condition: new, Year of construction: 2026, The main features, functions and advantages of the welding positioner are: Functions: 1. Direction of rotation switch: Allows you to control the direction of rotation of the rotator disc. 2. Direction of rotation switch: Allows you to change the direction of rotation of the disc. 3. Smooth regulation of the plate rotation speed: Thanks to this function, you can adjust the rotation speed of the plate to a specific job. 4. Compact, compact design: The solid construction ensures the durability and strength of the device. 5. Control pedal: Makes it easier to control the operation of the positioner. 6. Thermal fuse: Provides additional safety during operation of the device. 7. Brush motor: A brush motor is a type of DC electric motor that can be effective in various applications. 8. Plate tilt range 0 - 90°: The ability to tilt the rotator disc from 0 to 90 degrees is useful for welding in different positions. 9. Possibility of mounting a centering holder: Allows additional centering of elements. Advantages: Itedpfxjrigmge Acfji 1. Higher work efficiency: The positioner helps increase efficiency in assembly and welding processes. 2. Reduction of production costs: Automation or facilitation of rotation of elements can contribute to lower production costs. 3. Repeatability of made joints: The device helps to maintain the consistency and quality of joints. 4. Flexibility in use: The ability to adjust the speed and direction of rotation makes the device flexible in adapting to various tasks. 5. Improved working conditions for the welder: Allows the welder to work more comfortably and in comfortable positions during welding. The set includes: 1. PS-500 positioner device. 2. Control pedal. 3. Power cable. 4. Operating instructions. 5. Mast with welding torch. The PS-500 positioner from CORMAK is a valuable tool in the industry that requires rotation and positioning of elements, especially during welding processes. It helps to increase efficiency, reduce costs and improve the quality of work. Technical parameters: Maximum load 300kg Worktable size φ500mm Tilt angle 0° ~ + 90° Rotation speed 0.2 ~ 2.5 rpm Rotation power 200W Tilting speed manual Voltage 220V-1PH-50HZ Weight support Dimensions 700x650x710 Weight 97kg *three-jaw chuck is not included

Condition: new, Year of construction: 2026, I am selling a KUSING SPS-500 bottom crosscut saw. This is a fully electric, robust crosscut saw without the need to use compressed air to operate the machine. The machine offers an ideal solution for sawmills, primary processing of lumber, but also for any production that works with long prisms and needs to be precisely shortened to size, such as in the production of windows and doors. Thanks to the convenient, smooth stroke speed regulation, it is possible to simultaneously cut board material and prisms to size even with a weaker motor. Technical parameters: Motor power: 3 / 4 / 5.5 / 7.5kW Disc diameter: 500mm Cutting speed: 2 - 6s. Maximum cutting height: 150mm Maximum cutting width: 350mm Individual cutting parameters can be customized. The price includes basic tables 2 + 2 m Itjdpsx Ut H Tefx Acfji There is also a wide range of extension table configurations to choose from, whether it is digital stops, controlled stops, etc.

Condition: new, Year of construction: 2026, I am selling this long-cut (shortening) saw. Suitable for cutting boards, prisms or large prisms. Cutting length: 600 / 900 / 1200 mm Cutting height: 100 / 150 / 200mm Motor power: 7.5 / 11 / 15kW Disc diameter: 500 / 600 mm Iedsx Ut Iqopfx Acfeti Disc feed mechanical using an electric motor. Individual parameters can be customized. Tables according to specification.

Condition: used, Year of construction: 1979, Format: 920??1300 mm Equipment: Maximum sheet size 920??1300 mm, minimum size 560??1300 mm opening width within frame 920??1310 mm, maximum die size 910??1300 mm maximum die-cutting area 900??1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm Itodpfx Asy Iu Rtjcfoi maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Condition: like new (used), 4.500 kg Tragfähigkeit Schwerlast Lenkrolle ,arretierbar alle 90° am Umfang , Rolle und Schwenklager kugelgelagert ,Polyamidrolle 80 x 200 mm,Kontaktplatte 20 x 200 x 260 , Gesamthöhe 290 mm , Bohrungen 18 mm , Itodpfx Aoklxv Rocfei

Condition: ready for operation (used), DC Converter, Simoreg Siemens DC-Converter D485/30 Mre-GeE6S22, Used Machine Manufacturer: Siemens Simoreg Itsdpfsu U Ilgex Acfoi Model: D485/30 Mre-GeE6S22 Overall Dimensions: Length: 270 mm Width: 230 mm Height: 385 mm Weight: 6 kg Electrical Specifications: 3-Phase Input: 3AC; 400V; 25A Output: DC 485V; 30A 2-Phase Input: 2AC; 400V; 5A Output: DC 325V; 5A