Used Waldmann Weigl Start Hole Eroding Machine for sale (71,762)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Dwjdpfx Aoy I Uvcjggob Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: good (used), Vitap automatic through-hole drilling machine 4 lower heads 2 horizontal heads Dwjdpfen Hq Snsx Aggjb

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 with few operating hours It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Dwedjy Rxtkepfx Aggsb Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals Dwjdpfxjzn Ah Rs Aggjb - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 350 mm Dsdpfjzpxg Sox Aggowb Z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm Machining Taper: ± 30° Automatic wire threading and re-threading: Yes Maximum workpiece dimensions: 1,200 × 700 × 400 mm Control and Dielectric Fluid CNC control: CHARMILLES Dielectric fluid tank: 1,200 l Filter system: Cartridge filter MACHINE DETAILS Machine weight: 3,500 kg EQUIPMENT - Cooling unit

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck Dodpfx Agozb Ipzsgswb 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), ----- Dwsdpfx Agjhx Ummjgjb

Condition: new, Edge banding machine (with hinge holes passing function) (new) Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Dwsdpoxv Udaefx Aggeb Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg Price 11200 Eur (EXW Jonava, Lithuania)

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 1088 mm Dedjy Ehyvjpfx Aggswb Boring depth max. 85 mm Motor output 2x1,5 kW Overall size 1320x1040x1250 mm

Year of construction: 2001, condition: used, table-size . mm workpiece height . mm three-axis-real value indicator . 0 The technical specifications provided are based on information from the manufacturer or operator and are therefore non-binding for us. We reserve the right of prior sale; our General Terms and Conditions of Business and Sale apply exclusively. About Us Dsdpfxozdcbwj Aggswb Over 400 machines in our own inventory Over 15,000 m² of warehouse space; crane capacity: 70 t Over 10,000 accessory items for your workshop If you are looking to sell machinery, production lines, or your entire business, please do not hesitate to contact us. You can find additional listings on our website. Inspections are available by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Dodozy N Syspfx Aggjwb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: excellent (used), Compart machines - German, for cutting registers in books, holes. 6 pieces ready to work Dwedewm Hn Uopfx Aggeb

Condition: used, XYZ 2400 Gap Bed Centre Lathe with Acu-rite 2 Axis DRO, 315mm 3 Jaw Chuck, Swing Over Bed 660mm Diameter, Distance between Centres 2400mm, Spindle Speeds 30 - 1500rpm, 2 Position QCTP, 710mm Diameter Face Plate, Steady Dodpfxozy N Rco Aggjwb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Dwodeyit Uljpfx Aggjb

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, The mortising machine is used to create the counterpart for the tenon. Dsdpfey Tmrtex Aggjwb

Condition: used, used, top equipmentincluding setting gaugeMake MakaType STV-71Column machinewith caulking tools see picturesWorkpiece stop 2 piecesStop rail right / left 2150 mmWorkpiece blow-out 2xFoot switch2-hand safety circuitpneumatic workpiece clamping at the side 1 piecepneumatic workpiece clamping from above 2 piecesExtraction connection D 120 mmSpace requirement approx. 1200 mm x 800 mm x 1500 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Dedpfjvwf I Nex Aggewb

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control, Dwsdpfxexftqde Aggeb

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -Drill diameter ~30 -Drilling depth 750 / Extension ~1000 -Tank -Pumps -Loading device -Tailstock Dwedpfx Agsd Ri H Ejgob

Year of construction: 1989, condition: used, Erodiermaschine, gebraucht Baujahr: 1989 Dwjdpeit Rqiefx Aggjb Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at) oder *

Condition: used, Year of construction: 1983, with 2 drilling beamused, good conditionmanufactured by Scheertype DB 3built in 1983Masch.-No. 83120number of spindles 25 piecenumber of drilling beams 2Spindelabstand / grid 32 mmdrilling from tophydraulic feeder brake 2 pieceguide fence 1 piece ca. 2500 mmworking width ca. 800 mm (768mm)drilling depth ca. 100 strokedrill chuck M 10pendulum fence 3 piececlamp 3 piecedrilling programs 4 piecerequired space ca. 1400 mm x 1300 mm x 1800 mmweight ca. 1000 kglocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Dwedpfxjvwf N Ho Aggsb

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Djdswv Nb Njpfx Aggewb Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x1050x110 mm Weight 350 kg Total power requirement 1,5 kw Djdpfjvz Er Aox Aggowb

Condition: used, Manual Lever Corner Notcher BERNARDO Type AK100 Manual Notching Machine Serial No. A17010320 Year of manufacture 2017 Blade length: 100 mm Material thickness at 40 kg/mm²: max. 3 mm Notching angle: 90° Stroke: 28 mm Table size: 380 x 280 mm - Adjustable stops - Lever arm length: 650 mm, 500 mm bolt-on extension missing Dimensions (L x W x H): 380 x 380 x 1000 mm (with 650 mm lever) Dwsdjyhq Aqspfx Aggeb Net weight: 90 kg Good condition

Condition: used, Year of construction: 2005, XYZ Proturn SLX 555-2M CNC/Manual Lathe. S/No. SBLG 00041 (2005) with Proto Trak SLX Control (Control Retrofitted 2019), Chuck Size 310mm Diameter, Gap Bed, Swing Over Bed 660mm Diameter, 2000mm Between Centres, 3 Position QCTP, Spindle Speeds 30 - 1800rpm Dwodpjzy N Insfx Aggob Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Dwjdpfovn Sv Ujx Aggeb Width: 6300mm Height: 4300mm Weight: 31000kg