Used Watson-Marlow 630S for sale (1,449)

Condition: used, Drive motor, DC servo motor LENZE type GFQBT 80-24 Spindle motor, electric motor, main spindle motor Serial no. 184592 Year of construction: 1993 Rated power: 4.2 kW Operating voltage: 260 V DC Rated current: 20 amps Maximum speed: 3000 rpm Excitation voltage: 200 V DC Excitation current: 1.15 amps - Electric brake Shaft diameter: 24 mm (shaft with 8 mm feather key) Shaft length: approx. 47 mm (shaft protrusion from centering edge) Centering flange diameter: 110 mm Lhodpotpkx Nefx Aa Ieg Bolt circle diameter: 130 mm, 8 x M8 thread - Encoder, speedometer, GBR 190V Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Output current: 67 mA (max. 200 mA) Speed max. 9000 rpm External fan LENZE (EBM) type G2E 120 Mains connection: 230 V, 50 Hz, 0.32 A, 0.075 kW Overall length: 630 mm (without shaft and centering flange) Overall dimensions L x W x H: 690 x 340 x 430 mm Weight: 45 kg good condition

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Lhedpfjdzp Trsx Aa Isg Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: new, mileage: 4 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Lhjdpfxey R Ar Rs Aa Iog Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - 1 fuel tank - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor Ledpfx Aoy R Ar Dja Ijhg - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin...

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Lhedsif Sg Sjpfx Aa Ijg Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: new, mileage: 3 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension Lodpsy Ry Nysfx Aa Ijhg - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...

Condition: new, mileage: 5 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor Lhodpfx Asy Rym Soa Ieg - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: AD-R 60400 Bending force: 400 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 630 mm Abroad: 510 mm Optional foreign diameter: 750 mm | 1000 mm | 1250 mm table height: 1220 mm table width: 154 mm Y Fast speed: 120 mm/sec. Y Working speed: 8 mm/sec. Y Retraction speed: 100 mm/sec. X axes working speed: 250 mm/sec. R axes working speed: 140 mm/sec. R axes travel: 250 Engine power: 37 kW length: 7500 mm width: 2110 mm height: 3710 mm Weight approx. 35 tons Lhedpfx Asfin Hwea Ijg With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to get an overview of our

Year of construction: 2024, condition: new, Make: DURMA Type: AD-R 40400 Year of construction: NEW bending length: 4050 mm passage between the stands: 3400 mm Stroke: 365mm Installation height: 630 mm Throat: 510mm table height: 1050mm table width: 154mm Y high-speed: 140 mm/sec. Y working speed: 8mm/sec. Y retraction speed: 120mm/sec. X-axis working speed: 250mm/sec. R axes travel: 250 Engine power: 37 length: 5750 mm width: 2110mm height: 3540mm Weight: approx. 25000 kg Standard equipment Control: CNC Cybelec ModEva 19T CNC controlled motor-driven crowning European tool clamping system / or on customer request Durma clamping system Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes Backgauge: X1,X2,R1,R2,Z1,Z2 Control: DELEM DA-66T Delem 66T - 69T or Durma control is selectable DAM - Durma angle measuring system Hydraulic top tool clamping Wila NSCL-I-HC/UPB - PRO - 180 t/m Hydraulic bottom tool clamping Wila NSCR-I-HC-CNC/UPB - PRO Powerpack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 Bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Central lubrication manual or motorized Air conditioning for switch cabinet Further machines are ready for demonstration at our premises in Staufenberg. Lhjdpfxod Hy Huo Aa Isg We will be happy to provide you with further information on request

Condition: used, Year of construction: 2006, x-travel 630 mm y-travel 560 mm z-travel 560 mm table surface area 1000 x 600 mm spindle taper HSK 63 A spindle turning speed - stepless 18.000 U/min feeds x/y/z -stepless 0 - 30.000 mm/min rapid traverse 30 m/min no. of tools in magazin 2 x 12 Lhedpoy Tyzusfx Aa Isg workpiece diameter at full load 130 mm tool length - max. 315 mm weight of tools max. 8 kg internal coolant system feed 40 bar control HEIDENHAIN control MillPlus iT table load capacity max. 500 kg total power requirement 52 kVA weight of the machine ca. 6,5 t dimensions of machine L x W x H 3,40 x 1,86 x 2,42 m Accessories: probe HEIDENHAIN, TS 640; electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilter

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt Lodpsy Tiyysfx Aa Iehg • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Lhedpfxoy Timys Aa Ieg Type SZS 630/175 Sifting channel 630 mm wide With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) Lhjdsy Timmopfx Aa Iog • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Type SZS 630/175 Lhjdpoy Th H Ejfx Aa Isg Sifting channel 630 mm wide With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023

Condition: used, HERBOLD Zigzag Separator (Gravity Separator) Type SZS 630/212 Separation channel: 630 mm wide With 7.5 kW blower Material: ordinary steel With inlet cyclone and rotary valve Lhjdpfx Asy Th Hxoa Ieg

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 600 mm z-travel 500 mm NC-rotary table 630 mm spindle taper SK 40 spindle turning speed range 18 - 6300 U/min control DIALOG 4 feed 2 - 3600 mm/min rapid traverse 6 m/min table load max. 485 kg quill stroke 80 mm spindle drive 9,5 kW total power requirement 20 kVA weight of the machine ca. 4,6 t Lhjdpfxstqqtbo Aa Ijg dimensions 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Lhjdpfjyrhyusx Aa Ieg Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: used, mileage: 651,784 km, power: 375 kW (509.86 HP), first registration: 03/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro5, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 960 mm, Year of construction: 2013, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Bodywork/Crane Lhjdpfx Asvcgqcsa Ijg Flatbed with aluminium side walls, * Internal dimensions: 6,500mm x 2,480mm x 960mm, * Atlas crane model 186.3, year 2014, * 2-point outrigger support, Boom reach/lifting capacity: * 5.9 m = 3,200 kg, * 8.5 m = 2,120 kg, * 11.2 m = 1,600 kg, * High cab, Equipment: * L ClassicSpace, * Suspension: Air / air (full air suspension), * Steerable and liftable trailing axle, * Front axle load: 8.0 t, * Towing hitch with standard and DuoMatic brake coupling, * 12-speed gearbox - type: G 281-12, * Fuel tank: 630 l aluminium, * Rear side windows left/right, * Driver's cab seats: Comfort driver's seat with massage function, * External sun visor, * Manually operated lifting roof (steel), * Air conditioning, * Auxiliary heater (water-based), Technical features: * Audio system: CD radio comfort (Bluetooth), * Fleetboard pre-equipment, * CB radio, * Cool box / refrigerator, Safety/Environment: * Retarder, * Rear axle differential lock, * Bi-xenon headlights, * Emission standard EURO 5, Miscellaneous: * Engine: 12.8 l - 375 kW inline 6-cylinder diesel (OM 471), * Mercedes-Benz service maintained (11 service records), last serviced 09/2022 at 623,723 km, * Service brake renewed in 2022, * Payload: 10,800 kg according to registration certificate, * Permissible gross weight: 26,000 kg, Stone clamp can be purchased at an additional cost. Since 1972, your reliable partner for passenger and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly offers approx. 200 vehicles in the categories of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing solutions at favorable special conditions. If interested, we are happy to provide you with a tailored offer! Trade-in of your commercial vehicle/construction machine is welcome. If a new TÜV roadworthiness inspection is required, we can provide a separate offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners at an additional cost. The information provided in advertisements, on the internet, price tags, and in images is non-binding and does not constitute guaranteed characteristics. The seller accepts no liability or warranty for typing and data transmission errors. Listed equipment may need to be verified separately. Subject to errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, space requirement height: 100 mm, space requirement length: 630 mm, space requirement width: 320 mm, lye tipper Alkaline solution for classic shooting to the direct hearth Table top made of stainless steel Dimensions: 320 x 630 x 100 mm (with swivel lever 320 x740 x 100 mm) WxDxH Ledsdlp Rtspfx Aa Ishg

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Lhsdpjy S Ez Rsfx Aa Isg Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances Lsdsy Snbmopfx Aa Ishg - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Lodpfsy Tmxgox Aa Ijhg Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: good (used), Working platform, scissor lift, aerial work platform, cherry picker, lifting platform, scissor lift, scissor lift, drive axle aerial work platform, travel drive, drive axle -Manufacturer: GSL, travel drive axles left and right from aerial work platform -Type: KM 400 and HM 400 -Bolt circle: Ø 145 mm M14 Lodpfx Aeizugvsa Iohg -Dimensions: see photos -Delivery/price: complete -Dimensions: 630/370/H510 mm respectively -Weight: 52 kg/pc.

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: 840 D, table load: 4,500 kg, number of axes: 4, This 4-axis LOLA BH 110 CNC was manufactured in 2005. It features a generous X-axis travel of 1750 mm, Y-axis travel of 1650 mm, and Z-axis travel of 630 mm. The working table measures 1550 x 1250 mm and can support a load of up to 4500 kg. If you are looking to get high-quality boring capabilities, consider the LOLA BH 110 CNC boring machine we have for sale. Contact us for further information. • Working table: 1550 x 1250 • W axis: 1250 • Tool control Additional equipment • Heidenhain 3D touch probe Lhedpeywycgsfx Aa Ijg • Tool cabinet with over 30 tool holders • 2 x clamping tools 1000 x 800 • Chip conveyor • Post processor (for Sinumerik 840D)

Condition: used, Year of construction: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm control Heidenhain TNC 430 spindle speed: 10000 U/min power capacity - milling spindle 13/9 kW feed 30 m/min rapid traverse 30 m/min no. of workpieces in the magazine 24 Stück tool taper SK 40 table surface area 800 x 500 mm table load 0,5 t Overall size 1,9 x 3,3 x 2,6 mm weight of the machine ca. 4500 kg Used vertical machining centre in good condition. - external eletronic hand wheel Lhodjy I A Umepfx Aa Isg - coolant system - servo tool magazin