Used Wattsan 1530 E for sale (70,310)

Condition: ready for operation (used), Year of construction: 2020, A Labelling Machine E-Packaging S.r.l. for bottling lines, including a printing system, is available. Max. Speed: 20m/min, label length: 500mm, label width: 10-140mm, product height: 30-150mm. The machine was stored and not used, has therefore not been serviced, no known defects, documentation available. An on-site inspection is possible. Iisdpeuxdhnofx Apnsb

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm Iodpfx Apoykud Dsnoib ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 4,000 W, power: 4 kW (5.44 HP), warranty duration: 12 months, Equipment: documentation/manual, TRADE FAIR MACHINE AT A SPECIAL PRICE!!! SF 1530G 4KW Max 5G laser source with Precitec head. Also enables cutting of aluminium! This compact machine with a side pull-out table is space-saving, while still capable of processing large-format sheets. Cutting area: 1500x3000 mm. Also ideal for your business! Cutting up to 18 mm (mild steel S235) possible!! Iiedpsqwzuxjfx Apnob

Condition: used, High-pressure industrial water pumps – 90 kW – 55 bar – 33 m³/h Available: No. 2 high-pressure multistage industrial pumps for water lifting, complete with three-phase asynchronous electric motor and installation base. Isdpfxeytgvwj Apnjib The pumps are from a snowmaking plant and are in good overall condition, ideal for reuse in pumping stations, process systems, or pressurization plants. Technical data Pump: Flow rate: 33 m³/h Head: 55 bar Type: High-pressure multistage pump Mounted on skid with flexible coupling Electric motor: Type: Three-phase asynchronous Power: 90 kW Voltage: 400 V Current: 167 A Speed: 2970 rpm Duty: S1 (continuous) Equipment supplied: - Industrial mounting base - Motor-to-pump flexible coupling - Complete assembly ready for installation - Identification nameplates present Typical applications: - Industrial water pumping stations - Pressurization systems - Process plants - Fire-fighting systems - Artificial snowmaking plants - Industrial washing installations 2 identical units available.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 30610, We are offering this very well-maintained E. Bickel K.G. Heilbronn HK 3/50 creasing and perforating machine, year of manufacture 1978. Details: • Working width: 50 cm • Machine serial no.: 30610 • Supplied with 2 additional perforating combs • Robust industrial quality, reliable for paper and cardboard processing • Location: Salzburg, Austria • Viewing possible by appointment • Suitable for: bookbinderies, printing houses Price: Negotiable €2,250 Electric Creasing Machine E. Bickel HK3/50 – 50 cm Working Width, 2 Perforating Combs, 1978 If you have any questions or need further information, please feel free to send us a message or call us. 10 machines available – special total price when purchasing all. Prompt transaction preferred! Ijdpsytxulofx Apneib

Condition: new, Mori Seiki MV 40 E main spindle MV40SPU080ADA01 NEW GM4021244-009 from stock (traces of storage) Please refer to the pictures for further technical information Scope of delivery as shown Auction price is without 19% VAT and invoice The invoice will be enclosed with the shipment. The invoice will be enclosed with the shipment. Cj2Gdlmgos Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. Payment method Paypal bank Pick up by yourself You will receive information about bank details, payment methods, etc. by email Request more information PROVIDER Schneider Technik CNC 74423 Obersontheim, Germany +49 7973 ... show Last online: Last week Registered since: 2018 16 ads online Please call me back Show more SEND INQUIRY Iiedsuxnwaspfx Apnsb EN I am a dealer Receive offers for similar machines Send inquiry Privacy policy TELEPHONE & FAX +49 7973 ... show +49 7973 ... show print view Share Manage advertisement edit

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser source manufacturer: Raycus, laser power: 6,000 W, laser wavelength: 1,070 nm, working length: 1,500 mm, working width: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 2,610 mm, total width: 5,125 mm, total height: 2,128 mm, Equipment: CE marking, The WatMachinery ZMB1530 6kW is a heavy-duty fiber laser cutting machine from the ZMB series, engineered for fast, precise, and reliable sheet metal processing. This model is fitted with a Raycus 6kW fiber laser source and offers a cutting area of 3000 x 1500 mm, making it an optimal solution for workshops and industrial production lines working with steel, stainless steel, aluminum, brass, and other metals. The machine is equipped with a Raytools BS06K auto-focus cutting head, Delta / INOVANCE servo drives, Taiwan-made rack transmission, HIWIN / DTX linear guideways, a French Motovario gearbox, and the Cypcut control system. Its robust construction includes a reinforced machine frame, enclosed safety cabin, automatic lubrication system, industrial control cabinet, integrated smoke extraction, and an industrial-grade PC. Each component has been selected to ensure high positioning accuracy, stable drive transmission, and reliable long-term operation. The ZMB1530 is designed for continuous industrial duty with a 24-hour operating mode, travel speed of 80 m/min on the X and Y axes, and a maximum acceleration of 0.8G. The control system supports multiple file formats, remote operation, and real-time alarms and safety interlocks. An industrial water cooling system guarantees stable performance of the laser source and protects the machine during extended production cycles. As indicated in the material and cutting charts in the product brochure, the machine efficiently processes carbon steel, stainless steel, aluminum, and brass. The ZMB series is ideally suited for industries such as sheet metal fabrication, electrical cabinet manufacturing, automotive component production, general machinery, signage, metal product manufacturing, tooling, and many more sectors. Key Advantages: - 3000 x 1500 mm working area - Raycus 6kW fiber laser source - Raytools BS06K auto-focus cutting head - Cypcut control system - Delta / INOVANCE servo motors and drives - HIWIN / DTX linear guideways - Taiwan YYC rack transmission - French Motovario gearbox - Industrial water chiller - Fully enclosed protective cabin - Automatic lubrication system - Industrial PC with integrated vision system - Designed for 24/7 industrial operation Technical Specifications: Model: ZMB1530 / ZM-Series Laser Source: Raycus Fiber Laser Laser Power: 6 kW Working Area: 3000 x 1500 mm Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 100 mm Traverse Speed (X/Y): 80 m/min Positioning Accuracy: ±0.05 mm/m Repeatability: 0.05 mm Maximum Acceleration: 0.8G Power Supply: 380V / 50Hz Operating Mode: 24/7 Machine Weight: 3150 kg Machine Dimensions: 5125 x 2610 x 2128 mm Main Components: * Raycus laser source * Raytools cutting head * WatMachinery machine bed and gantry * Taiwan YYC rack * France Motovario gearbox * Delta / INOVANCE servo drives (X, Y, Z axes) * HIWIN / DTX linear guideways * Cypcut control system Iodpfxjyr D Nxj Apnjib * HanLi industrial water chiller * CHNT / Schneider electrical components * CKD / SMC pneumatic components * Integrated smoke extraction system * Automatic lubrication system * HP industrial PC * Enclosed safety cabin Application Areas Suitable for: * Sheet metal fabrication * Electrical cabinet production * Advertising and signage * Mechanical parts manufacturing * Kitchen equipment production * Automotive industry * General machinery industry * Metal product manufacturing * Tooling and measurement component production Pro

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8421x2250x2250 mm Weight 5500 kg Total power requirement 25 kw Iiodpfx Asvz Hd Tjpneb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8900x3700x2500 mm Weight 8300 kg Iisdpfx Apovz Habonob Total power requirement 11 kw

Condition: ready for operation (used), Year of construction: 2014, operating hours: 26,400 h, functionality: fully functional, machine/vehicle number: 1530PG, Submission of a bid obligates timely collection by 29.07.! No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table dimensions Table width: 1,500 mm Ijdpfx Aswzw Injpnoib Table length: 3,000 mm MACHINE DETAILS Control: Control panel Generator: Hypertherm 130XD EQUIPMENT Consumables and nozzle set Central vacuum system

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, stroke length: 700 mm, throat depth: 350 mm, bending force (max.): 150 t, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers Isdpfx Ajxn Srxopnjib

Condition: like new (used), Hello, we offer here a used Erowa adapter pallet PowerChuck P automatic, pallet was only for demo purposes in use. Condition as new. ER-115304. shipping and inspection possible For questions we are happy to answer. Iisdpfelz Nb Nex Apneb

Year of construction: 1981, condition: ready for operation (used), - USED - DOUBLE COLUMN MECHANICAL PRESS TONNAGE: 400 ton WORKTABLE: 2750 x 1520 mm Iiodpfxjyigv He Apnsb INNER SLIDE TRAVEL: 600 mm PLATE HOLDER TRAVEL: 200 mm PLATE HOLDER CAPACITY: 75 ton USEFUL HEIGHT: 980 mm MOTOR POWER: 50 kW

Condition: new, functionality: fully functional, fuel type: gasoline, fuel tank capacity: 10 l, color: yellow, operation weight: 500 kg, lifting power: 350 kg/m, lifting height: 1,600 mm, Year of construction: 2025, Equipment: all wheel drive, The KINGWAY HERACLES H130 is a surprisingly compact machine with great capabilities, equipped with a hydrostatic 3WD drive. Thanks to its compact dimensions and a turning radius of just 993 mm, it boasts exceptional maneuverability, allowing work in narrow passages. The machine features a mounting plate compatible with "Avant" and "Multione" attachments, further increasing its versatility. With a maximum lifting capacity of 350 kg and a tipping load of 400 kg, it is ideal for agriculture, construction, as well as larger private estates. Its low operating weight of 500 kg and easy transportability make it the perfect solution for users seeking a mobile and versatile machine. The KINGWAY HERACLES H130 is perfectly suited for agricultural enterprises, construction companies, electrical and plumbing businesses, as well as renovation firms and other service providers. We also guarantee custom after-sales service. The machines are manufactured under European technicians’ supervision, based on a robust design that enables operation under all conditions. TECHNICAL DATA: Model: H130 Operating weight: 500 kg Lifting height: 1600 mm Engine: PETROL Fuel type: Petrol Cylinders: 2 Displacement: 740 cm³ Emission standard: EU Stage V & EPA Tier 4 Final Max. torque: 47 Nm at 2500 rpm Cooling system: Air-cooled Operating voltage: 12 V Battery: 20 Ah Max. tipping load: 400 kg Max. lifting capacity: 350 kg Operator’s cab: None Travel speed: 0~15 km/h Steering angle: 0~360° Ijdpowifvcsfx Apnoib Turning radius (inside/outside): 0/993 mm Standard tires: 18×9.50-8 Fuel tank: 10 l Hydraulic oil tank: 10 l Hydraulic flow: 29 l/min Hydraulic pressure: 160 bar Transmission type: Hydrostatic Length: 1854 mm Width: 993 mm Bucket width: 1000 mm Height: 1304 mm THE MACHINE IS FITTED WITH DIFFERENT TIRES THAN SHOWN IN THE PICTURES. THE CURRENT TIRES ARE DISPLAYED IN THE LAST TWO PHOTOS. PRICE: Net: €6,600 Gross: €7,854 WARRANTY: Every machine comes with a 12-month warranty which can be extended for a further year. After the warranty period, we guarantee our customers access to all spare parts. SERVICE: We have our own mobile service, which caters to all our customers inside and outside Germany. KINGWAY is the leading and largest importer of construction and agricultural machinery in Europe. We have been active in the European market for 25 years and import and sell approximately 3,000 to 4,000 machines annually, earning the trust of many customers.

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Ijdpfxsx A Hdxo Apnoib Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 5,600 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: simplex, construction height: 3,500 mm, fork length: 1,400 mm, drive type: Elektro, Electric side loader Load center: 600 Mast type: Standard Iiodpfx Apju Ac Afonsb Technical condition: good Fork positioner, Hydraulic extendable forks 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,080 mm, fork length: 1,400 mm, drive type: Elektro, Electric sideloader Load center: 600 Mast type: Standard Technical condition: good Battery year of construction: 2021 Description: Battery year 2017 Hydraulic extension forks 1400/2450 mm Iiodpfju Acz Iox Apnob Fork positioner, Hydraulic extension forks 3rd valve, 4th valve,

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Isdpsxp Ibxjfx Apneib Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Iiodpfx Apsw Ufplonsb Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, color: red, empty load weight: 2,200 kg, maximum load weight: 600 kg, emission class: euro5, shovel volume: 0.3 m³, digging bucket width: 1,100 mm, Year of construction: 2025, operating hours: 1 h, Modern KINGWAY H180T TELESCOPIC LOADER – professional and durable. With a lifting capacity of 600 kg, this model is the ideal equipment for the most demanding industries, including construction, electrical, plumbing, renovation, and similar sectors. We also guarantee service support after the warranty period expires. LOADERS are manufactured under the supervision of European technicians. The equipment features a robust design and can be used in all conditions. TECHNICAL DATA: ✒︎ XINCHAI engine ✒︎ Power: 18.2/24.5 kW/hp ✒︎ Number of cylinders: 3 ✒︎ Lifting capacity: 600 kg ✒︎ Max. hydraulic pump pressure: 200 bar ✒︎ Max. hydraulic pump flow: 42 l/min ✒︎ RPM: 3000 rpm ✒︎ Bucket capacity: 0.3 m³ ✒︎ Bucket width: 1100 mm ✒︎ Weight: 2200 kg ✒︎ Travel speed: 17 km/h ✒︎ Min. turning radius: 2700 mm ✒︎ Max. steering angle: ±49° ✒︎ Length: 3820 mm ✒︎ Height: 2310 mm ✒︎ Width (tyres 10.0/75-15.3): 1050 mm ✒︎ Width (tyres 31×15.5-15): 1270 mm ✒︎ Width (tyres 400/60-15.5): 1350 mm ✒︎ Max. lift height (fully extended arm): 3526 mm ✒︎ Max. dump height (fully extended arm): 3000 mm ✒︎ Max. lift height (retracted arm): 2900 mm ✒︎ Max. dump height (retracted arm): 2380 mm ✒︎ Reach: 1132 mm ✒︎ Minimum ground clearance: 200 mm ✒︎ Wheelbase: 1540 mm ✒︎ Hydraulic oil tank capacity: 40 l ✒︎ Fuel tank capacity: 45 l FEATURES: ✒︎ High-quality, robust construction ✒︎ EURO hitch ✒︎ Easy handling ✒︎ Highly manoeuvrable ✒︎ Compact and versatile ✒︎ Lighting system ✒︎ Hydraulic quick-coupler ✒︎ Third hydraulic circuit for attachments ✒︎ CE certified to the latest standards and guidelines INCLUDED: ✒︎ 1 x H180 T wheel loader / yard loader ✒︎ Including bucket + forks ✒︎ Hydraulic quick-coupler ✒︎ Joystick control ✒︎ All-wheel drive ✒︎ EURO HITCH Isdpfx Aswzcb Tspneib ✒︎ Road approval PRICE: €16,050 net €19,100 gross - INCLUDES bucket + forks + quick-coupler - For regularly serviced machines, we EXTEND WARRANTY to TWO YEARS - FREE 12 months WARRANTY - after this period, we supply all original parts as needed! - FREE delivery within a 200 km radius - VAT-FREE sales possible (with VAT ID number only) - FINANCING available - We are always at your service! KINGWAY GERMANY is the only authorised stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and Kingway’s main branch in Germany. We have a huge selection of machines in stock, with around 70 units available at all times. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighbouring countries, and offer access to all spare parts for our customers. Book an appointment and come for a test drive!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel tank capacity: 15 l, color: grey, empty load weight: 1,200 kg, shovel volume: 0.3 m³, Year of construction: 2025, operating hours: 1 h, The YAMA S15 LITE crawler excavator – modern, professional, and durable. The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, and renovation companies as well as service providers in similar sectors. The YAMA S15 LITE is also equipped with a swing boom, significantly facilitating work in confined spaces. We also offer post-warranty service support. The mini excavators are designed and manufactured under the supervision of European engineers. The robust construction ensures reliable operation under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Bucket volume (set with 3 buckets): 0.03 m³ Engine model: LAIDONG Engine power: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: No Max. gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Max. travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 l DIMENSIONS: Overall length: 2,870 mm Iiedpfowzh A Nex Apnjb Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Track gauge: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach at ground level: 2,400 mm Minimum swing radius: 1,550 mm Max. digging radius at ground level: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), fuel type: diesel, color: red, overall weight: 7,500 kg, operation weight: 5,500 kg, maximum load weight: 2,000 kg, Year of construction: 2025, The 825T model is the ideal machine for the most demanding construction, electrical, hydraulic, renovation companies, and service providers in related industries. It is built on a robust frame and can be operated under any conditions. The comfortable, glazed cabin ensures safe and pleasant operation. The machine boasts an impressive lifting height of 4.8 meters! PERFORMANCE: Rated load capacity: 2,000 kg Total weight: 5,500 kg Rated bucket capacity: 1.2 m³ Maximum traction force: ≥34 kN Maximum breakout force: ≥51 kN Maximum climbing ability: 30° Maximum dumping height: 4,006 mm Maximum dumping reach: 854 mm Overall dimensions (L×W×H): 6,200 × 2,100 × 2,580 mm Minimum turning radius: 4,043 mm ENGINE: Standard model: YUNEI DEF20CAF4 Type: Vertical, inline engine, water-cooled, 4-stroke diesel Number of cylinders – Bore/Stroke: 4 — 100 × 125 mm Rated power: 55 kW Max. torque: 250 N·m Minimum specific fuel consumption: ≤243 g/kW·h DRIVELINE: Iisdpjxcv Hiofx Apnsb Torque converter: YJ1—26501 Transmission: Intermediate shaft, power-shift type Gear range: 2 forward, 2 reverse Maximum speed: 20 km/h Drive axles: Main reduction – spiral bevel, single-stage Reduction type: Planetary, single-stage Wheelbase: 2,551 mm Track width: 1,650 mm Ground clearance: 310 mm HYDRAULIC SYSTEM: Operating pressure: 16 MPa Arm lift time: 4.8 s ± 0.2 s Full cycle: 9.2 s ± 0.5 s Fuel tank volume: 80 L Automatic leveling function: Yes BRAKE SYSTEM: Service brake: Disc brakes on all four wheels Parking brake: Hand brake TYRES: Type and size: 16/70-20 Front tire pressure: 0.22 MPa Rear tire pressure: 0.22 MPa PRICE: €30,500 net €36,295 gross WARRANTY: - Each machine carries a 12-month warranty, which can be extended by an additional two years. - After the warranty period, we ensure our customers have access to all spare parts. SERVICE: - We have our own mobile service team that reaches all our customers throughout Germany and abroad. KINGWAY is Europe's largest and leading importer of construction and agricultural machinery. For 25 years, we have been active in the European market, importing and selling between 3,000 and 4,000 machines annually, earning the trust of numerous customers. KINGWAY DEUTSCHLAND is the only stationary distributor of the Kingway brand in Germany. Only here can you visit and test all of our machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main Kingway branch in Germany. We have a vast selection of machines in stock, with about 100 units available at any time. We deliver throughout Germany, Austria, Switzerland, Italy and other neighboring countries. We also offer full access to parts and mobile services for our customers. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 10.3 kW (14.00 HP), color: red, lifting power: 600 kg/m, shovel volume: 0.13 m³, Year of construction: 2025, The design of the simplified control panel is user-friendly, making operation easier and more comfortable. Comfortable seating, intuitive operation Ergonomically designed seats enable long working periods without fatigue. The recommended operator layout streamlines the workflow and increases efficiency. Machine body made from high-quality material The frame of the mini loader is manufactured from high-grade steel, enhancing stability and wear resistance, which ultimately improves the machine’s durability. More powerful machine core A brand-name engine and premium internal components ensure reliable performance of the mini loader. PERFORMANCE: Model: H130 PRO Payload: 238 kg Bucket volume: 0.13 m³ Maximum lifting force: 600 kg Travel speed: 0–4.2 km/h Hydraulic pressure: 18.5 MPa Lifting time: 4.7 s Lowering time: 3.2 s Dumping time: 4.6 s Gradeability: 30% Operating weight: 780 kg ENGINE: Brand: KOOP Model: 192F Type: 1-cylinder, diesel Power: 14 hp / 3600 rpm Fuel consumption: ≤ 2.3 l/h Starting: electric Tank capacities Fuel tank: 5.5 l Engine oil: 1.65 l Hydraulic oil: 23 l DIMENSIONS: Length with bucket: 2373 mm Width with bucket: 1050 mm Width without bucket: 1010 mm Height with ROPS: 1867 mm Height without ROPS: 1291 mm Track width: 800 mm Ground clearance: 180 mm WORK RANGE: Maximum working height: 2572 mm Height to bucket pivot pin: 1953 mm Maximum dump height: 1484 mm Dump reach: 561 mm Dump angle at max height: 29° Rollback angle on ground: 24° PRICE: €6,900 net €8,211 gross KINGWAY DEUTSCHLAND is the sole permanent distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. Our extensive inventory ensures around 100 machines are available at any time. We deliver throughout Germany, Austria, Switzerland, Italy, and neighboring countries. We also provide our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann Iodow Ufqiepfx Apnjib

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, fuel tank capacity: 55 l, color: red, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, lifting height: 3,300 mm, emission class: euro5, mast type: telescopic, shovel volume: 0.6 m³, digging bucket width: 1,670 mm, Year of construction: 2025, Model: FARMER 812 The FARMER 812 is the ideal machine for agricultural, construction, electrical, sanitary, repair, and service companies as well as similar sectors. We also guarantee service for the machine after the warranty period has expired. The wheel loaders are manufactured based on and under the supervision of European technicians. The equipment is built on a robust frame and is capable of operating under all conditions. The comfortable, glazed cab ensures safe and convenient operation. DIMENSIONS AND WEIGHT: Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL EQUIPMENT: Engine: Diesel, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 25 HP Battery voltage: 12 V Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brakes Iiedpfx Aew Ufixopnob OPERATING PARAMETERS: Lifting height (lower edge of standard bucket): 2.54 m Maximum lifting height (upper edge of attachment): 3.0 m Maximum lifting height (upper edge of bucket): 3.3 m Dumping height (45°): 2.05 m Maximum lifting capacity (at attachment): 1.5 t Bucket width: 1.67 m Bucket volume: 0.6 m3 Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom cycle time: 7 s Fuel tank: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick-hitch system * 2x hydraulic control circuits * Reversing camera * Heating * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lights PRICE: €16,800 net €19,992 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main German office for Kingway. We offer a huge selection of machines in stock, with around 100 units always available. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also provide access to all spare parts and mobile service for our customers. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, color: yellow, empty load weight: 990 kg, Year of construction: 2025, operating hours: 1 h, Now only €6,500!! BAGGER 1000 – professional and durable. The BAGGER 1000 model is the perfect equipment for the most demanding construction, electrical, hydraulic, repair, and service companies in related industries. We also guarantee equipment servicing after the warranty period has expired. Our mini excavators are manufactured under the supervision of European technicians. The equipment is built on a robust structure and can operate under all conditions. TECHNICAL DATA: - Weight: 990 kg - Engine: Koop - Number of cylinders: 1 - Euro 5 - Oil cooler: YES - Maximum speed: 1.3 km/h - Maximum climbing ability: 30° - Pump type: gear pump WORKING RANGE: Ijdpfsw Ufraex Apneib - Maximum digging reach at ground level: 2850 mm - Maximum digging depth: 1650 mm - Maximum dump height: 2610 mm - Maximum unloading height: 1850 mm - Maximum vertical digging depth: 1375 mm - Blade lift height above ground: 345 mm - Blade lowering depth: 255 mm DIMENSIONS: - Overall length: 2300 mm - Overall height: 2300 mm - Overall width: 930 mm PRICE: net €6,500 gross €7,735 - INCLUDES 3 excavator buckets (20, 40, 80 cm) - For machines regularly maintained by us, we extend the warranty to three years (warranty valid exclusively for machines purchased directly from us – not from other dealers). - FREE 12-month WARRANTY – after this period, we supply all original parts if required! - We operate our own mobile service, reaching all our customers in Germany and beyond. - FREE delivery within a 200 km radius - VAT-free sales possible (with EU VAT number only) - FINANCING is available. KINGWAY DEUTSCHLAND e.K. is the only authorized stationary dealer for the Kingway brand in Germany. Only with us can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a wide selection of machines in stock – approximately 70 models are always available. We deliver machines to all of Germany, Austria, Switzerland, Italy, and other neighboring countries. In addition, we provide our customers with unrestricted access to all spare parts. Make an appointment and come for a test drive!