Used Wet Whetstone for sale (715)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: Crjdpezact Eefx Al Nec - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Max. width of workpiece: 230mm - Min. width of workpiece: 15mm - Max. height of workpiece: 160mm - Min. height of workpiece: 10mm 7 spindles: 1) Horizontal, lower, 230mm, 7.5kW 2) Vertical, right, 160mm, 5.5kW 3) Vertical, left, 160mm, 5.5kW 4) Vertical, right, 160mm, 5.5kW 5) Horizontal, upper, 230mm, 7.5kW 6) Horizontal, upper, 230mm, 7.5kW 7) Horizontal, lower, 230mm, 5.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - Motor: 2 x 0.37kW - Spindle diameter: 40mm - All spindles equipped with a brake From above: - 8 feeding rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, pulling, rubber, double From below: - 1 feeding roller, toothed, pulling, swiveling - 3 discharge rollers, pulling, metal, smooth - Rollers are pneumatically pressed - Length of the feeding table: 2480mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth feed speed adjustment via frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Diameter of the dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5520x1930x1900mm - Weight: approx. 4000kg ADVANTAGES - 7 heads - Ideal for both wet and dry wood - With ATS - Original DTR + CE documentation - Unpainted - Used planer, in perfect condition Original photos Net price: 156900 PLN Cedpfxozab Nfo Al Nsrc Net price: 37360 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), mileage: 122,600 km, power: 294 kW (399.73 HP), first registration: 08/2013, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 15 m³, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, parking heater, seat heater, spoiler, - Adaptive cruise control - Heated mirrors - Power brake booster - Roof spoiler - Air conditioning - Refrigerator - Air suspension - Air-suspended seats - Air horn - Beacon light - Disc brakes - Heated seats - Sun visor - Stability control - Auxiliary heater (park heater) - Toolbox - Power take-off (PTO) SCANIA with J. Hvidtved Larsen FlexVac 311 suction loader! Only 298 operating hours! Csdpfxey Uriyo Al Nerc SCANIA P400LB6X2*4HNB, Euro 5, Opticruise transmission, 122,602 km, 14.5 m³ dry vacuum unit (stainless steel), year of manufacture: 2013, 9,000 kg front axle, 3rd axle liftable and steerable, remote control, refrigerator, first registration: 27.08.2013, air conditioning, electric windows, Webasto (additional heater), air suspension, ABS, overall length: 9,129 mm, overall height: 3,895 mm, overall width: 2,550 mm, wheelbase: 4,900 mm, tyres: 385/55R22.5 (90%) and rear 315/70R22.5 (90%), electric windows, radio/CD player, diesel tank: 400 liters, first owner, complete service history, last technical inspection at 122,099 km (24.01.2026), next service at 122,600 km (21.04.2026)… The truck is clean and fully functional! Superstructure by “J. Hvidtved Larsen FlexVac 311”: Tipper body with 14.5 m³ capacity made of stainless steel, vacuum/pressure pump, insulated with heating for winter operation (operating temperature range -20 °C to +50 °C), hydraulic suction arm, remote control, vacuum/pressure pump (KAESER OMEGA 82 P-V) with only 298 operating hours, suitable for: waste, water and air… The superstructure is clean and fully functional! Price: € plus VAT. VAT ID number. Stockholm, Sweden More & Application areas: * Vacuum loading of loose and dusty materials such as gravel, ash, slag, cement, lime, mill scale, etc., vacuum loading of sludge, sediment or liquids, * Dust extraction and suction of industrial plants, warehouses, tanks, silos, conveyor belts, unloading points, etc., * Pressure loading of loose materials. * Reactor cleaning * Tank cleaning * Cleaning of ventilation systems * Silo cleaning * Factory cleaning/dust removal * Biogas plant cleaning (WKF, ZKF) * Sand filter cleaning * Catalyst bed replacement * Specialized industrial cleaning services The dry suction vehicle is designed for the most demanding dry suction tasks, but can also be effectively used for wet operations. The flexible suction unit can be optimally adapted to any application, regardless of whether suction is from below or from above. The filter chamber is optimally designed and features a large hydraulic discharge flap, which makes emptying simple and efficient. Using a specially developed ejector, dry materials can also be conveyed upwards very effectively. All work functions can be controlled via remote control. General information Applications: cleaning, construction, demolition, ground drainage, trenching, earthworks, site management, and agriculture Technical information Engine displacement: 12,740 cc Transmission Transmission: Opticruise, semi-automatic gearbox Axle configuration Brakes: disc brakes Suspension: air suspension Front axle: tyre size: 385/55R22.5; max. axle load: 9,000 kg; steerable; axle brand: Nokian Hakkapelitta; tyres...

Condition: good (used), Vacuum cleaner motor, suction turbine, wet vacuum cleaner Csdodwdrgjpfx Al Njrc -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer -Voltage: 24 V -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm From above: - 10 toothed steel infeed rollers, including 2 double rollers - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table - 2 lateral pressure units - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller - Pneumatically adjustable rollers - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Csdsy Ux Shepfx Al Norc Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)

Condition: excellent (used), Catalog number 6338 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 160mm 7 spindles: 1) horizontal, lower 230mm, 5.5kW 2) vertical, right 160mm, 5.5kW 3) vertical, left 160mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 7.5kW 6) horizontal, lower 230mm, 7.5kW 7) universal 360°, 230mm, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000 rpm From above: - 6 feed rollers, toothed, metal, including 2 double rollers - 4 discharge rollers, rubber, including 1 double roller - 3 pressure rollers on the discharge side From below: - side pressure roller on the feed side - feed roller, toothed, pulling, swiveling in the lower table - 3 pulling rollers, metal, smooth - rollers pneumatically adjustable - length of the feed table 1190mm - central lubrication of the table - electric adjustment of planing thickness - body lifting motor 0.56kW Crsdpfxoy Ux Ebo Al Njc - stepless feed speed adjustment via inverter 6-24m/min - feed motor 3.7kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 7x125mm - dimensions L/W/H 5100x2070x1900mm - weight approximately 5000kg ADVANTAGES – with 7 heads – universal spindle – ideal for wet and dry wood – spindles equipped with brakes - DTR documentation – used planer, very good condition Net price: 139900 PLN Net price: 33310 EUR depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Cedpjx Da Tijfx Al Nsrc Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm Crjdpfx Alsuxc Dho Nsc

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm Credpfxeuxczaj Al Njc

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Year of construction: 2016, operating hours: 360 h, KIMERA SRL KM 0010 Small MULTIMIX / Concrete Mixer / Large Version • Manufacturer: KIMERA SRL • Model: KM 0010 Small MULTIMIX • Year of manufacture: 2016 Credpfeyxqf Iex Al Njc • 360 operating hours • Maximum production output: 25 m³/h • Maximum batch size per cycle: 4 m³/h • Large configuration • Mobile concrete batching plant • Mobile complete system – ideal for transport by truck or trailer • Immediately ready for operation – no foundation required • Independent control unit with operator panel, USB port, start/stop/emergency stop • Premium grid covers & conveyor technology for material loading and mixing process • Safe and robust construction for jobsite environments • Suitable for dry and wet mix production directly at the jobsite • Efficient & precise – saves material and time through inline dosing • Total weight: 1,400 kg • Length: 600 cm • Width: 300 cm • Height: 300 cm • German machine • Immediately operational • This offer is non-binding and subject to change. - Prior sale reserved, - Errors and/or typographical mistakes excepted. - Sale subject to our General Terms and Conditions.

Condition: used, mileage: 50 km, power: 110 kW (149.56 HP), first registration: 02/2026, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, trailer coupling, E07 Hill Start Assist, JA7 Blind Spot Assist, EY5 Mercedes-Benz Emergency Call System, F1K Coat Hook in Driver's Cabin, EY6 Breakdown Management, B25 Electric Parking Brake, G43 9G-TRONIC Automatic Transmission, AI1 Rear Axle Control Code Crown Wheel 215, L65 Ceiling Light(s) Cargo/Driver’s Cabin with Door Contact, RS3 Steel Wheels 6.5 J x 16, JK5 Instrument Cluster with Color Display, Z1N N1 Classification, LG7 LED High Performance Headlights, SE5 Driver’s Seat Lumbar Support, XO9 Mercedes-Benz MobiloVan with DSB and GgD, CN2 Radiator Grille Frame in Vehicle Color, M94 Vehicle without EU Speed Limiter, XG7 Without Payload Increase/Decrease to 3,500 kg, IR7 Wheelbase 4325 mm, Extended Rear Overhang, HH2 Electric Additional Warm Air Heater, T75 Grab Handles for Driver and Passenger Entry, T77 Grab Handle on Cargo Partition Sliding Door, W54 Twin Rear Doors, Opening Up to Sidewall, E1E Digital Extra: Hard Disk Navigation, HH9 TEMPMATIC Semi-Automatic Climate Control, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start-Stop Function, 805 AEJ X4/1, ES0 Jump Start Connector, D03 High Roof, ES5 Charging Package Instrument Panel, E1U USB Socket 5 V, MS1 Cruise Control, FM3 WET WIPER SYSTEM, Q22 Fixed Tow Bar Ball Head, T85 Entry Handle on Rear Left Pillar, HI1 Climate Zone 1 (Cold/Comfort), T86 Entry Handle on Rear Right Pillar, V43 Wooden Floor, V42 Lashing Rails on Sidewall at Waist Rail, XY5 Model Year 5, RM1 M+S Tires, C6L Multifunction Steering Wheel, LA2 Light Assist, ZM0 Panel Van, LA1 High Beam Assist, IT4 3.5 Tonner, J55 Seat Belt Warning for Passenger Seat, H16 Heated Driver’s Seat, J58 Seat Belt Warning for Driver’s Seat, H15 Heated Passenger Seat, J4V Pre-installation for Intelligent Tachograph. You can reach us by phone Monday – Friday until 8:00 PM and Saturday until 4:00 PM! Additional information: Csdpfx Aljyz I E Do Njrc Leasing/financing and trade-in possible! Errors and prior sale excepted! All information without guarantee ... more on our homepage.

Condition: used, mileage: 3,000 km, power: 140 kW (190.35 HP), color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request you to schedule an appointment. Mr. Kiel will be happy to assist you, Tel: A4M All-wheel drive 4x4 with torque-on-demand, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CA3 Active Steering Assist, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, D03 High roof, D50 Continuous partition, E07 Hill start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E30 Battery main switch, single-pole, E3J Pre-installation for switch panel, E43 Trailer socket 13-pole, E4A Antenna interface for radio, navigation and mobile phone, E4S Smartphone integration package, E7B DIGITAL EXTRA: PRE-INSTALLATION FOR NAVIGATION, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, ED5 Parameterizable special module, EK1 Connection strip for electrical connection, ES0 Jump start assist, ET4 Active Distance Assist DISTRONIC, EW6 DIGITAL EXTRA: REMOTE SERVICES PLUS, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F2W Winter package, F64 Exterior mirrors, electrically foldable, F68 Exterior mirrors, heated and electrically adjustable, FF5 Storage compartment above windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under cockpit, FM3 WET WIPER SYSTEM, FU5 Exterior mirrors without indicator, FY7 Multi-button remote control, G031 TRANSMISSION VERSION 031, G43 9G-TRONIC, GA7 TRANSMISSION AUTOMATIC TRANSFER TORQUE 700NM, H15 Seat heating for front passenger, H16 Seat heating for driver, H1B Tachograph operation at the front under the headliner, H21 Heat-insulating glass with band filter in the windshield, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, IR4 Wheelbase 3665 mm, IT4 3.5 tonner, J10 Speedometer km/h, J55 Seatbelt warning system for front passenger seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB6 Parking package with 360° camera, JD6 Intelligent tachograph EU, JF1 Rain sensor, JF7 Start-off information assistant, JH3 Communication module (LTE) for digital services, JI7 Starting mileage maintenance interval 60,000 km, JK5 Instrument cluster with color display, JK8 Driver camera, JM2 Extended automatic restart on highways, JM3 Route-based speed adjustment, JM4 Active Speed Limit Assist, JS3 Driving Assistance Package, JW8 ATTENTION ASSIST, K31 Noise regulation according to ECE R51-03, K51 Protection against misfueling, KB7 Main tank 93 liters, KL5 Fuel filter with water separator, L13 Fog lights with cornering lights, L21 Rear fog light at the bottom, L22 Tail lights in partial LED technology, L44 FRONT SIDE TURN SIGNAL LIGHTS, L65 Ceiling light(s) LD/FG compartment with door contact, L94 Deletion of parking light, LA2 Driving light assistant, LB1 Lateral marker lights, LB5 3rd brake light, LC2 LED light strip in the cargo compartment, LE1 Adaptive brake light, LG7 LED High Performance headlights, MI9 Deletion of Eco Start-Stop function, MP6 Engine version Euro VI, MR0 Exhaust stage E (for heavy-duty vehicles), MU6 OM 654 DE 20 LA 140 kW (190 hp) 3800/min, P2L Cargo compartment package 2, P47 Mud flaps front, P48 Mud flaps rear, P4F Rating Country Set Euro-NCAP, Q10 Crossmember for trailer coupling, Q11 Longitudinal member reinforcement, RG8 Tires 225/75 R16 C, RM7 Summer tires, RS3 Steel whee Cedpjy T Dz Sefx Al Nsrc

Condition: excellent (used), Catalogue number 7641 TECHNICAL DATA - Max. planing width: 800 mm - Max. planing height: 200 mm - Upper section: - Pull-in feed roller, toothed - Pawls - Pressure unit - 2 feed rollers, toothed - Pressure unit - Planing shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (fitted with 3 straight knives, 1 profiling knife) Csdpfx Ajy T Rgzsl Nerc - Pressure unit - Outfeed roller, smooth - Lower section: - Guide rail - Infeed table - Feed roller, smooth - Planing shaft 800 mm, 4-knife, 7.5 kW - 2 feed rollers, smooth - Smooth, split running roller - Side pressure at outfeed - Rear section: - 2 side spindles + pressure units: 1) Right vertical 90 mm, 4 kW 2) Left vertical 90 mm, 4 kW - Spindle diameter: 35 mm - Spindles arranged alternately - Spindles adjustable up/down, right/left 3) Additional lower horizontal spindle, 350 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 40 mm - Outfeed: 4 upper metal sliding rollers, 2 lower feed rollers, rubber-coated - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction outlet diameters: 3×180, 130 mm - Dimensions (L×W×H): 3100×2000×1900 mm - Weight: approx. 3,500 kg ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing beams, flooring, etc. – 3 planing shafts + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer in very good condition Net price: 64,900 PLN Net price: 15,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total height: 1,250 mm, overall weight: 1,000 kg, total length: 1,870 mm, total width: 740 mm, type of input current: three-phase, tank capacity: 30 l, usable tank capacity: 20 l, input voltage: 400 V, power: 3.6 kW (4.89 HP), For sale is a Z4 centrifugal finishing system / vibratory finishing system for surface treatment of workpieces. The system is suitable for deburring, edge rounding, cleaning, smoothing, polishing, and burnishing of small to medium-sized workpieces. The centrifugal technology enables intensive processing with short cycle times. The machine is particularly suitable for series production, metal processing, stamped parts, turned parts, milled parts, and smaller precision components. The system is offered including a pneumatic unit and control cabinet. The Z4 features an integrated separation system for separating workpieces and grinding media, as well as a continuously variable speed adjustment of the rotating table via a frequency inverter. Technical data according to the manufacturer's data sheet Z4: Manufacturer: probably Spaleck Oberflächentechnik Model: Z4 Machine type: Centrifugal finishing system / vibratory finishing system Nominal volume of the working container: 30 l Usable volume of the working container: 20 l Operating voltage: 400 V / 50 Hz Connected power: 3.6 kW Max. speed of the rotating table: 280 rpm Ring gap width: ≥ 0.4 mm Tilting angle: 150° Space requirement: approx. 1.4 m² Width of the system: 740 mm Length of the system: 1,870 mm Height to the top edge of the system: 1,250 mm Length of the separation section: 855 mm Equipment: Centrifugal finishing system Z4 Integrated separation system Pneumatic unit Separation section / discharge Control cabinet Frequency inverter for stepless speed adjustment Cedpey Uwh Usfx Al Nsrc Working container with wear-resistant PU lining Suitable for wet machining / vibratory finishing processes Condition: Like new, used for only a few hours. Terms of sale: Sale exclusively to commercial businesses/entrepreneurs. The machine is sold as a used machine, as described or as inspected, with exclusion of any warranty/liability for defects. No guarantee is given. Errors and prior sale excepted. Inspection possible by appointment. Sale is ex works.

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW Crsdpfoy Ti R Ejx Al Noc - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 1985, condition: refurbished (used), Cup grinding machine Make: GMN Crjdpfsgayvqox Al Noc Model: MPS E-200 Year of manufacture: 1985 Machine No.: 9701 with warranty Accessories: - Grinding wheel Ø 200 with flange - Dressing diamond - lateral dresser - magnetic clamping plate 250 x 150 mm (pole pitch: 2 mm) - wet grinding device - instruction manual - used, as seen -

Condition: reconditioned (used), Steel grinding machine Make REMA Model DS 07/ST version with pole-changing motor 0,22/0,37 kW 1450/2900 rpm year of manufacture unknown Ma.-No. 022857 Equipment: - Reversing switch right/left rotation - column design with chip tray - Wet grinding device - 2 pcs. support table ATS (left) inclinable from -5° to +15 and with spring rockers - 2 pcs. angular stops - adjustable support table ATK (right) for grinding chip grooves - steel holder for support table ATK 360° rotatable, swiveling, with height adjustment and knurled screw for adjustment of chip depth - enlarged protective hood (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - protective hood (right) for grinding wheels Ø 125 mm with mounting flange - Operating instructions Csdohvu Tmepfx Al Nerc used as seen, without warranty

Condition: reconditioned (used), Year of construction: 1995, Surface grinding machine Make Geibel & Hotz Model FS 40 Compact Crsdpfxod Rl Nqo Al Noc Year of manufacture: 1995 - partially overhauled, newly painted, RAL 7035 light gray / RAL 7012 basalt gray Machine no. 9200895 with guarantee Accessories: - Electro-magnetic clamping plate 400 x 200 mm (pole pitch: 5 mm) - Wet grinding device - Automatic vertical feed with digital display for vertical and transverse movement - Fine feed on the transverse path handwheel - Grinding wheel with flange - Central lubrication device - Hand lever dressing device with dressing diamond - Transverse speed control, infinitely variable - Operating instructions - Used, as seen -

Condition: new, Cup grinding machine Make: DELTA Model: LB 300 Condition: New machine equipped as standard with: - Grinding wheel flange - grinding wheel - Wet grinding device - Operating instructions Crsdpfsfhv Edsx Al Njc

Condition: like new (used), Year of construction: 2019, Vibratory Mill / Ball Mill (Laboratory) The MM 500 control is a laboratory device for dry, wet, and cryogenic grinding. It is suitable for hard, brittle, soft, elastic, and fibrous materials and is used in a wide range of fields – from materials research and pharmaceuticals to geology as well as food and environmental analysis. Codpeywkqzofx Al Norc The samples (up to 10 mm particle size) and grinding balls are placed in the grinding jars. These jars are inserted and positioned on the cooling plates. Oscillating movements of up to 30 Hz reduce the sample size through impact and friction forces. Optional cooling can be achieved using various media (LN², water, etc.). Final particle sizes as small as 0.1 µm can be achieved. The typical grinding process takes between 30 seconds and 30 minutes. Grinding balls are available in various materials (steel, stainless steel, tungsten carbide, zirconium oxide) and sizes (available from the manufacturer). The machine offer includes two 125 ml grinding jars (material as shown in illustration). 10 mm hardened steel grinding balls are also included.

Year of construction: 2017, condition: good (used), Finishing machine for digitally printed labels - Web width: 340 mm (max.) - Full-rotary speed: 120 m/min. (max.) Cjdjy Id T Depfx Al Norc - Repeat length: 152 - 457 mm (max.) Unwinder: - Electronic web guide control system - 3''/76 mm shaft with magnetic brake - Roll diameter Ø 700 mm (max.) Rewinder: - 2 x 3''/76 mm shafts with magnetic brake - Roll diameter: 2 x Ø 600 mm (max.) - Automatic web tension control - 1 x 3''/76 mm shaft, matrix removal/waste UV Flexo Unit, full-rotary: - Servo-driven printing unit - Automatic register control - UV curing unit - 1 x anilox roller - 1 x plate cylinder Cold foil/laminating station: - 2 x 3"/76 mm shafts - Wet lamination / cold lamination - Laminate/delaminate Die-cutting unit, full/semi-rotary: - Die-cutting width: 330 mm (max.) - Die-cutting tolerance: +/- 0.15 mm - Magnetic cylinder: 22"/176 teeth - Automatic register control - Servo control Slitting unit: - Razor blade slitting - Shear knife slitting

Condition: used, functionality: fully functional, total length: 1,980 mm, total width: 1,890 mm, total height: 3,110 mm, The Fessmann Rotatherme roasting cell is an innovative piece of cooking equipment designed to meet the needs of professionals in the food industry. Thanks to its advanced technology, it offers both dry and moist cooking, enabling a wide variety of products to be prepared with exceptional quality. Indeed, this machine ensures uniform and precise cooking, guaranteeing optimal results with every use. What's more, the rotisserie cell incorporates a cart rotation system during cooking, enhancing the efficiency of the process and ensuring even heat distribution. What's more, its compact design makes it easy to integrate into even the most confined production environments. What's more, it keeps energy and water consumption under control, contributing to more economical and environmentally-friendly production. What's more, the rotisserie cell's ease of maintenance reduces downtime and increases the overall efficiency of your production line. When you choose the Fessmann Rotatherme rotisserie cell, you're opting for a reliable, high-performance solution that optimizes your cooking processes. As a result, you can increase productivity while maintaining high quality standards. In short, this equipment is a wise investment for any company wishing to improve its performance in the field of industrial cooking. Cedpfx Asu Iagrel Nerc Technical specifications: Type: Rotatherme Max. cooking temperature: 220°C Cart capacity: 1940 x 1040 x 1030 mm Dry and wet cooking Electrical heating power: 88 kW Total power : 92 kW Cooking water consumption: 70 L/h Humidification water consumption: 70 L/h Compressed air consumption: 80 L/h Max. fresh air requirement from outside: 300 m3/h Dimensions: 1980 x 1890 x 3110 mm Cart rotation system during baking

Condition: used, Year of construction: 2008, operating hours: 1,019 h, functionality: fully functional, machine/vehicle number: 93.437.268, working width: 1,350 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 7,085 mm, total width: 2,020 mm, total height: 2,295 mm, overall weight: 4,800 kg, working height: 850 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, power: 55 kW (74.78 HP), table height: 850 mm, grinding width: 1,350 mm, input current: 100 A, Equipment: documentation/manual, For sale is a reliable Weber NLC 1350 wet grinding machine from 2008. This machine is specifically designed for high-quality surface finishing of laser-cut, punched, and nibble parts. Thanks to wet grinding technology, excessive material heating is prevented, ensuring consistent results with high precision. Highlights & Features: Precision: Consistent working height and robust modular construction. Versatility: Suitable for deburring, edge rounding, and descaling of both thin and thick sheet metal. Safety: Wet grinding binds grinding dust and increases safety in the production process. Control System: Intuitive user interface for rapid changeover. If you have any questions or need further information, please feel free to send us a message or give us a call. Credpfx Ajy Ar A Nsl Noc

Condition: used, Year of construction: 1998, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 94.98.030, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 100 rpm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,800 mm, table width: 520 mm, table length: 900 mm, position of the milling head: mittig, type of input current: three-phase, rotational speed (max.): 6,000 rpm, rotational speed (min.): 100 rpm, table load: 400 kg, overall weight: 3,500 kg, input voltage: 400 V, workpiece weight (max.): 100 kg, input current: 40 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Good used CNC milling machine with low hours. Used exclusively for repairs and very small production runs. Extensive assortment of tool holders as shown in the photos, including vise, chucks, cutters, plates, and tap holders. Also equipped with a Benz high-speed spindle for wet operation up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gearbox stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Toolholder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Automatic travel distances Spindle longitudinal feed (X-axis): 600 mm Spindle transverse feed (Y-axis): 500 mm Spindle vertical feed (Z-axis): 450 mm Feed drives (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Credpfx Alsywn Sio Noc Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse rate X / Y-axis: 15,000 mm/min Rapid traverse rate Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Electrical connection data Total installed nominal power: 15.8 kW Usable and connected load: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: ready for operation (used), functionality: fully functional, The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Credswnr Tropfx Al Nsc