Used Wte Quick Change Chuck for sale (20,208)

Condition: used, diameter / mm boring diameter / mm - / Type: KTNC 250 Make: FORKARDT Hodjy Tbu Ajpfx An Iofl

Condition: used, diameter 310 mm hollow ca. 100 mm chuck width / mm weight / kg - three-jaw chuck - dimension Ø200mm - Passage: Ø80mm Hodpfx Ansy Suqns Ijfl

Condition: used, diameter 400 mm hollow 100 mm chuck width 180 mm weight ca.50 kg Diameter: Ø250mm Hfjdjy S Dnpjpfx An Ijl Passage: approx. 100mm Chuck width: 180mm Weight: 50kg

Condition: used, diameter 315 mm Hfodpfoy S Dwqsx An Iel weight of the machine ca. 70 kg

Condition: used, diameter 400 mm Hfodpsidrkfefx An Iel boring diameter / mm - / SMW-AUTOBLOK power chuck HFK 400 Diameter: 400mm Inner diameter: 100mm n-max: 2300 rpm Chuck width: 140mm Tube length: approx. 890mm Weight: 130kg max. operating force: 10000 daN

Condition: used, diameter / mm Hodpfx Ansytycqo Ijfl hollow / mm chuck width / mm weight / kg HES 400/115 power chuck from BERG with jaws Type: HES 400/115

Condition: used, diameter 315 mm hollow / mm chuck width 128 mm weight ca.70 kg Make: Forkardt Type: F315 Hfjdpjy S Ducefx An Iel Diameter: Ø315mm Passage: approx. 85mm Chuck width: 140mm Weight: 70kg

Condition: used, diameter 600 mm hollow 140 mm weight 180 kg Ø: 600 mm Passage: 140 mm Weight: 180 kg Individually adjustable jaws The jaws must be checked prior to commissioning. Hfedpfxey S D Ams An Iol

Condition: used, diameter 250 mm boring diameter / mm - / hollow 65 mm Forkardt power chuck including flange Hodpfxey S D Eue An Ijfl Type: 3NHF250-65-Z8-S12 nmax: 4500/min Diameter: 250mm Passage: 65mm Factory no.: Y615126

Condition: used, diameter 315 mm hollow 70 mm chuck width 110 mm weight / kg Hfodpfey S D Hlox An Iol Three-jaw chuck from Forkardt F315 1 jaw is missing! Type: F315 Diameter: Ø315mm Passage: approx. 90mm Lining width approx.: 115mm

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Hsdpewc Afhsfx An Iofl Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Hsdpfxjwc Ri Ie An Iefl Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg Hedpfx Anewc Rk Es Iofl ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: like new (used), Year of construction: 2024, MAZAK QUICK TURN 200MSY Max. machining diameter: 380 mm Max. machining length: 575 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control: Mazatrol SmoothG - Hydraulic KITAGAWA 3-jaw chuck BB-208 for main spindle, diameter 210 mm - Hydraulic KITAGAWA 3-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Robot interface - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders Hfodpjzgw Icjfx An Isl

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Hfodpozv D H Rsfx An Iol Max. machining diameter: 280 mm Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: Hodpsy S A Risfx An Iofl - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck B-206 for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 units of fixed tool holders - 2 units of powered tool holders

Condition: like new (used), Year of construction: 2022, MAZAK QUICK TURN 250MY SmoothG Max. turning diameter: 380 mm Max. turning length: 504 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: Hodpfxezk I Tqe An Iefl - CNC control: Mazatrol SmoothG - KITAGAWA 3-jaw chuck, BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. powered tool holders The machine has only 900 hours of pure machining time!!!

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 350MB 1250U Max. swing diameter: 830 mm Max. turning diameter: 420 mm Max. turning length: 1,250 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Hfedpfx Anoy Igz Dj Iel Machine is equipped with: - CNC control Mazatrol SmoothG - SMW three-jaw chuck KNCS 400, diameter 400 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 2020, Hydraulic 3-jaw chuck, manufacturer: SCHUNK, type: TFH 500-160, year of manufacture: approx. 2020, in good condition. Includes 2 chuck keys and 3 pairs of jaws. Diameter: 500 mm, height: 150 mm. Bore in the front area of the chuck: diameter 160 x 65 mm, depth. Hedpfx Anozty Rge Ijfl Short taper DIN A 8 in the flange, thread in the chuck for tensioning rod (approx. M 100 x 2). Weight approx. 180 kg without jaws. The chuck is in good condition. The chuck was previously installed in a MORI SEIKI SL 6 or SL 603.

Condition: used, functionality: fully functional, turning diameter: 435 mm, spindle motor power: 11,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 360 mm, type of input current: three-phase, total height: 1,900 mm, total length: 2,500 mm, total width: 1,500 mm, quill stroke: 275 mm, quill diameter: 55 mm, overall weight: 3,600 kg, Equipment: rotational speed infinitely variable, Control system: Mazatrol T-32-3 Hedpfozxy Ntex An Iefl 12-tool turret, tailstock included.

Condition: used, functionality: fully functional, turning diameter: 435 mm, spindle motor power: 11,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 360 mm, type of input current: three-phase, total height: 1,900 mm, total length: 2,500 mm, total width: 1,500 mm, quill stroke: 275 mm, quill diameter: 55 mm, overall weight: 3,600 kg, Equipment: rotational speed infinitely variable, Control system: Fusion 640 t 12-position tool turret, tailstock included Hfjdjzxyupjpfx An Iel Chip conveyor included

Condition: excellent (used), Lathe Chuck Three-Jaw Chuck Röhm 350 mm Diameter Hfodpfx Answmk Hus Ijl (28633) Bore Diameter 115 mm Centering Diameter 290 mm Height 100 mm 2 Sets of Jaws Weight 53 kg

Condition: repair required (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 65123, For sale: Mazak QT 10N with Knoll chip conveyor. The machine and chip conveyor are functional, but the X-axis needs to be overhauled and is currently not in operating condition. Hfodpfx Answn D Nfe Isl The price is a fixed price and non-negotiable.

Condition: used, functionality: unexamined, Ferwood Code: RU0011650 - Manufacturer Code: K6343K0930 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, contact us. Hfodpfx Answtnpme Iel

Condition: used, functionality: unexamined, Ferwood code: RU0011648 - Manufacturer code: K6343K0950 - Condition: Used - Functionality: Not tested - If interested, we offer overhaul service, please contact us. Hsdpfx Aswtnmlen Ijfl