Used *Sonstige Xilin Cbd10A for sale (199)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 3,000 h, load capacity: 1,000 kg, fuel type: electric, drive type: Elektro, Low lift truck Hedpfx Asz H Ennsg Tefn Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Professionally designed crossflow ultrafiltration membrane system, engineered, built, and fully instrumented by a membrane specialist. 12 membrane modules in 3 parallel stages of 4 modules each, active membrane area 2.16 m². PVDF ultrafiltration membranes, separation limit 100 kDa, in PVC module tubes. Membrane stages can be individually shut off. Designed for diafiltration and pure concentration. Hygienic centrifugal pump, approximately 11 m³/h at approximately 2.5 bar feed pressure, crossflow up to 2.5 m/s. Retentate-side pressure adjustment via automatic proportional valve, stainless steel heat exchanger for temperature control. Ideally operated in conjunction with two feed tanks. Hfedpfszmapvjx Ag Ten Technical data: - Total membrane area: 2.16 m² (12 modules, 3 stages of 4) - Membrane type: PVDF-UF, separation limit 100 kDa; module tubes PVC, stages can be individually shut off - Circulation rate: approx. 11 m³/h at approx. 2.5 bar; crossflow up to 2.5 m/s - Permeate rate: 20–120 l/h·m² (depending on suspension/concentration) - Interfaces: Inlet/Outlet, each DN50 (DIN 11851) - Instrumentation: Flow rate (feed/permeate), pressure and temperature sensors, proportional valve, stainless steel heat exchanger - Commissioned in June 2023; well-maintained, operational condition, regularly CIP-cleaned (last cleaning on 02/02/2026) More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the client through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Condition: used, functionality: fully functional, Year of construction: 1997, load capacity: 13,500 kg, Heavy-duty trailer Hedpfxoz N N Ewe Ag Tsfn Condition: Ready for use and fully functional Technical condition: good Description: 2-axle, 3-way tipper trailer from SCHWARZMÜLLER with aluminum walls - - - Payload 13.5 tons - - - Tare weight 4.5 tons - - - Year of manufacture 1997 - - - Walls can be swung and folded open - - - Rear wall opens automatically - - - 1st wall: 80 cm aluminum, original Schwarzmüller - - - Extension walls: 60 cm aluminum - - - Undercarriage and platform base have already been sandblasted, primed, and painted - - - 2-circuit compressed air system - - - Lighting system - - - Internal platform dimensions: width 2.42 m, length 5 m - - - Tires approximately 80% - - - with Austrian registration documents.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 8,000 kg, Stone clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Hfedsz Sh Nuopfx Ag Ten Technical condition: good Description: Year 2019, Capacity 800 kg, Width – 700 mm, 360° rotatable, ID OS2154

Condition: used, fuel type: diesel, operating hours: 5,857 h, total width: 2,550 mm, fuel: diesel, Key features Internal reference: 26028T Chassis number: JKC 840 7607 Vehicle model: 2000 W 602 BD Combination roller / Swiss-Vehicle Vehicle make: Other Product category: Roller Condition: Used Hours: 5857 Hsdpfx Agsz Hpu So Tefn Fuel: Diesel Suspension: Steel-Steel Hydraulic system: Additional hydraulics Axles & Tires Axle 1: 13.6-28/8mm Number of axles: 1 Weights & Dimensions Vehicle width: 2550

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: UVA 1030 plus Control: Heidenhain iTNC 530 Year: 2008 SPECIFICATIONS Travel X-Axis: 1.030 mm Y-Axis: 610 mm Z-Axis: 560 mm Hodpfjz Dkrtex Ag Tofn Rapid motion: (X/Y/Z): 30 m/min. Max. revolution: 10.000 rpm Spindle power: 13,5 kW Tool: SK40 Tool capacity: 24 Table size: 1.000 x 500 mm Max. Table Load: 700 kg Equipment Chip conveyor Electronical handwheel Caliper Internal cooling: 20 bar

Condition: excellent (used), functionality: fully functional, color: white, overall weight: 7,000 kg, Year of construction: 2020, Equipment: air conditioning, 40-FT BITCOIN MINING CONTAINER MOBILE DATA CENTER INFRASTRUCTURE For sale is a professionally fitted 40-ft industrial container, type "HPC Mobile Pro 180U", manufactured in 2020. According to the documentation, the system was designed for up to approximately 180 air-cooled ASIC miners. Only the fitted container infrastructure is being sold. ASIC miners, GPU servers, and external power supplies are not included. TECHNICAL DATA • 40-ft industrial container • Type: HPC Mobile Pro 180U • Date of manufacture: 17.06.2020 • Capacity: up to approx. 180 air-cooled ASIC miners, according to layout • Connection power: 2 × 120 kW or approx. 240 kW, according to seller • Electrical: 400 V, 3P + N + PE, 50 Hz • 4 × 250-A main switches according to electrical plans • Power distribution with Schneider Electric components • Control cabinets IP55 according to plan • Open steel rack constructions • Powerful axial fans • Inlet and outlet louvers with filter surfaces • Mitsubishi split air conditioning unit for the technology/network area • CAT cabling, patch panels, and switch infrastructure • Camera and alarm components according to documentation • Technical documentation with approximately 66 pages • Weight: approx. 7 t, according to seller • Location: 8957 Spreitenbach, Switzerland POSSIBLE APPLICATIONS Hfedpfozt Sw Sex Ag Tsn Bitcoin/ASIC mining, expansion of a mining farm, hosting/colocation, use of inexpensive or surplus electricity, as well as compute, edge, test, or retrofit projects. INSPECTION AND CONDITION Used condition with typical signs of wear and tear. Functionality has not been tested. Inspection is possible and highly recommended by appointment. A sales dossier, detailed photos, video, layout, electrical, and circuit diagrams, as well as the documentation, can be provided to qualified interested parties. All technical specifications are based on available documents or seller information. Before connection and commissioning, the system must be inspected, adjusted, and approved by a qualified electrician. SALE AND TRANSPORT B2B sale ex location Spreitenbach. Loading, crane, transport, insurance, export/import, customs, permits, and commissioning are the responsibility of the buyer. No returns; liability for defects is excluded to the extent permitted by law.

Year of construction: 2003, condition: used, functionality: fully functional, empty load weight: 3,500 kg, total length: 1,600 mm, load capacity: 42,000 kg, Tragedorn Load center: 1200 ISO class: Terminal West Condition: Ready for use and fully functional Technical condition: very good Hjdpfoz Evnvjx Ag Tjfn Description: Length: 1600 mm, Diameter: 400 mm

Condition: used, Year of construction: 2007, lifting height: 4,500 mm, fuel type: diesel, Forklift 5,100 kg – max. 2,000 kg at 4.5 m lift height – sideshift – = Further information = Year of manufacture: 2007 Unladen weight: 5,100 kg Lifting capacity: 3,000 kg Reference number: 95 Please contact Miguel Cubas for further information. Hjdpfx Aex Scn Iog Tefn = Company information = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: used, empty load weight: 5,500 kg, maximum load weight: 6,500 kg, overall weight: 12,000 kg, first registration: 03/2007, total length: 10,000 mm, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, electronic stability program (ESP), tail-lift, Key Features Internal Reference: 26287M Chassis Number: GFB 266 111 06 Vehicle Model: GFB 185 K Box/Semi-trailer / Swiss Vehicle Vehicle Make: Other Product Category: Box Condition: Used Date of First Registration: 03/16/2007 Last Inspection (MFK or TÜV): 07/26/2024 Overall Vehicle Condition: 6 Suspension: Air-Air Hfsdpoz Hn Uqefx Ag Tjn Cab Vehicle Equipment: ABS, ESP Axles & Tires Axle 1: 385 / 55 R 22.5 / 10mm, Disc Brakes, Air Suspension Axle 2: 385 / 55 R 22.5 / 10mm, Disc Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 12000 Payload: 6500 Unladen Weight: 5500 Vehicle Height: 3800 Vehicle Length: 10000 Vehicle Width: 2550 mm Body Body Manufacturer: Geser Body Model: Box / Semi-trailer Body Internal Dimensions (L x W x H): 7400x2504x2545 Body Year of Manufacture: 2006 Liftgate Liftgate Brand: Dautel Liftgate Length: 1600 Liftgate Payload: 2000 Liftgate Year of Manufacture: 2006

Year of construction: 2004, operating hours: 2,123 h, condition: used, functionality: fully functional, fuel type: diesel, drive type: Diesel, Roller Condition: Technically good Description: Maximum operating weight: 2710 kg Operating weight (with ROPS): 2600 kg Module weight (front/rear): 1260 kg / 1340 kg Speed range: 0-10 Joint oscillation: ±10° Theoretical gradeability: 45% Static linear pressure (front/rear): 10.5 / 11.2 kg/cm Water tank: 160 liters Deutz F2L 1011F engine Type: Air-cooled diesel Rated power, SAE J1995: 23 kW (31.0 hp) 50-liter fuel tank Hydrostatic brake activated by the driving lever Parking/auxiliary brake: Multiple disc on both drums Hfjdpjzvi Rbjfx Ag Tjn ID: SL5354

Condition: used, functionality: fully functional, Year of construction: 2011, total length: 3,100 mm, load capacity: 12,000 kg, empty load weight: 2,000 kg, construction height: 2,650 mm, construction width: 1,750 mm, Crane arm ISO class: Terminal West Condition: Ready for use and fully functional Hfedpfx Agjz Ewhqj Ton Technical condition: very good

Condition: used, functionality: unexamined, Year of construction: 2023, lifting height: 200 mm, fuel type: electric, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Lifting height: 200 mm Drive: Elektro 24V Year of manufacture: 2023 Internal no.: 1700303 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin. Hfsdpfxsz Hcfqs Ag Tsn

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,480 h, load capacity: 1,800 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: telescopic, construction height: 1,930 mm, power: 35 kW (47.59 HP), empty load weight: 2,900 kg, drive type: Diesel, construction width: 1,750 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Normal Front tire type: Pneumatic Hfsdpfx Agoz Ivd Nj Tjn Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Description: THALER 48T18 telescopic loader -- 4.8m reach -- 1.8-ton lifting capacity -- year of manufacture 2015 -- 4480 operating hours -- hydraulic quick coupler -- 4-cylinder YANMAR diesel engine, 35kW -- 2-speed hydrostatic transmission -- cabin -- heater -- lighting system -- additional hydraulics up to fork carriage, 3rd and 4th valve -- with NEW pallet fork -- fork carriage with EURO attachment -- wide, very good tires -- new bucket available at extra cost -- overall height: 1.93m -- width: 1.75m -- unladen weight 2900 kg -- operating weight 3200 kg -- delivery possible!! 3rd valve, heater, full cabin

Year of construction: 2004, condition: good (used), Spritzgiessmaschine bis 5.000 KN Machine type: Krauss Maffei KM 2300-12000 MC Year: 2004 Control: CNC MC4 Working hours: 93.900 h SPECIFICATIONS Closing unit Closing force: 23,000 kN Maximum tool opening force: 1,420 kN Thrust force of the movable plate (opening): 227 kN Clamping force of the movable platen (closing): 203 kN Tool clamping area (H x W): 2,830 mm x 2,400 mm Stand spacing (H x W): 2,000 mm x 1,600 mm Tool opening stroke: 2,600 mm Min. tool height: 1,100 mm Maximum tool height: 1,800 mm Maximum tool spacing: 3,700 mm Hydraulic ejection stroke: 350 mm Ejector force (forward/reverse): 415/115 kN Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Displacement: 8,588 cc Projectile weight (PS): 7,815 g Injection capacity: 1,019 cc/s Screw speed: 113 rpm Maximum plasticizing capacity: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated power of the pump motor: 132 kW Installed heating capacity: 997 kW Adjustable cylinder heating zones: 7 Number of drying cycles: 350 per hour Tank capacity: 2,500 L Dimensions and Weight Hsdpozi Sfzsfx Ag Tjfn Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total weight of the machine: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 Robot X-Axis: 2.000 mm Y-Axis: 3.000 mm Z-Axis: 5.000 mm

Condition: used, mileage: 10,431 km, first registration: 07/1950, empty load weight: 1,055 kg, total width: 2,550 mm, gearing type: mechanical, fuel: regular/benzine 91, fuel type: gasoline, number of cylinders: 4, Key Features Internal Reference: 26999M Chassis Number: 438.29482 Vehicle Model: Lancia Aprilia Vehicle Make: Other Product Category: Passenger Car Condition: Used Mileage: 10431 Date of First Registration: 07/21/1950 Last Inspection (MFK or TÜV): 04/04/1977 Fuel Type: Gasoline Transmission Type: Manual Cylinders: 4 Cab Vehicle Equipment: Radio Number of Seats: 4 Weights & Dimensions Hfodez Hyw Dopfx Ag Tsn Unladen Weight: 1055 Vehicle Width: 2550

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,544 h, load capacity: 1,400 kg, lifting height: 8,500 mm, free lift: 2,903 mm, fuel type: electric, mast type: triplex, construction height: 3,387 mm, fork carriage width: 900 mm, empty load weight: 3,369 kg, drive type: Elektro, construction width: 1,300 mm, Reach truck Load center: 600 Hodpfx Agoz Dltlo Tjfn ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire size: 300 Rear tire size: 350 3. Valve

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck Hfsdpfxsz Hcf Do Ag Ton TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Internal no.: 1700301 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck Hfodpfjz Hcf Rex Ag Tsn TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Internal no.: 1700300 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Hsdpez Hcfwjfx Ag Tsfn Year of manufacture: 2023 Internal no.: 1700302 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck Hedpfxjz Hmtfe Ag Tefn TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Internal no.: 1700299 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, mileage: 23,765 km, first registration: 07/1959, overall weight: 1,715 kg, empty load weight: 1,490 kg, total width: 2,550 mm, gearing type: mechanical, fuel: regular/benzine 91, fuel type: gasoline, maximum load weight: 225 kg, number of cylinders: 6, displacement volume: 3,440 cm³, Key Features Internal Reference: 26996M Chassis Number: S83 613 9DN Serial Number: 010.553.477 Vehicle Model: XK 150 Saloon / Swiss Vehicle Vehicle Make: Other Product Category: Passenger Car Condition: Used Mileage: 23,765 Date of First Registration: 07/01/1959 Last Roadworthiness Test (MFK or TÜV): 06/04/2021 Hsdpfxsz Hyw Rj Ag Tefn Fuel Type: Petrol Engine Displacement (cc): 3440 Transmission Type: Manual Cylinders: 6 Cab Number of Seats: 4 Weights & Dimensions Gross Vehicle Weight: 1715 Payload: 225 Unladen Weight: 1490 Vehicle Width: 2550

Condition: used, total width: 2,550 mm, Key features Internal reference: 25566M Vehicle model: Hook-lift thermal silo Vehicle make: Other Product category: Thermal tipper Condition: Used Hfodpfez Hpy Iox Ag Ton Weights & Dimensions Vehicle width: 2550 Body Body model: Hook-lift thermal silo

Condition: used, Year of construction: 1999, operating hours: 3,400 h, machine/vehicle number: 261724855, TRACTOTECHNIK GRUNODRILL 10S Year: 1999 Operating hours: Meter reading - Borehole diameter: max. 385 mm - Maximum torque: 2500 kN - Tensile force: 96 kN - Compressive force: 65 kN - Max. drilling length: 250 m - Power: 90 kW - Drilling rods and bits included - Complete equipment with separate motor, hydraulic unit and tank for drilling fluid - Motor: Perkins 119 kW / 162 hp This offer is subject to change; errors and omissions excepted. Only the specific agreements in the order confirmation or purchase agreement are valid. The basis for this contract is exclusively our General Terms and Conditions (GTC). These can be accessed at any time on our website or can be requested from us. The place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me. Further information: Intended use: Construction Hsdpfx Agehd I S Ue Tjfn

Condition: used, Year of construction: 1996, functionality: fully functional, Used conveyor belt/incline belt for sale - Length: 60 m - Belt width: 650 mm Hjdpfjzrwavjx Ag Tofn - Cover - Side-mounted walkway Not yet disassembled!