Used Dalla Bona Molploeg 3 Pm for sale (64,916)

Condition: used, New: Yes Colour: Blue Njdpfxs Aar S Ho Abujlh Working width: 200 cm

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Nljdpfoz Nhx Ajx Abuoh Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Condition: used, New: Yes Njdpfxoz S U Hfj Abuslh Please contact us for more information.

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar Njdpfx Ajim I Ruobuelh ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: excellent (used), 3-phase DC spot welding machine, A/DH version Brand DALEX Type PMS 14-5 G3 Thrust: 550 mm Rated power at 50 & duty cycle: 150 kVA Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Nledjv Uwyrspfx Abujh Weight: 1,620 kg with double-stroke cylinder 4-position switch Main switch Mounted control cabinet according to VDE 0110 with 100-program MPS 8043/1 welding controller

Condition: used, Year of construction: 2005, Cuts fillets into portions by weight The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over. The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Portion cutter (fixed weight or fixed length) Products: Fish, chicken and meat fillets Belt: Perforated, 280 mm wide Njdpfx Aez Nc Rrobuslh Scanner: Cameras with laser line Controls: Control panel with colour screen Electrical: 3 x 380–480 V Construction: Stainless steel

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, workpiece height (max.): 500 mm, workpiece diameter (max.): 730 mm, total height: 3,560 mm, total length: 5,925 mm, total width: 2,695 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 23,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 10,000 rpm, spindle nose: Big plus BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, 5-axis Vertical Machining Center Technical details: CNC Control Mazatrol Fusion 640 M 5x Nlsdpfxj Aawnme Abuoh Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm C-axis (table rotation) 360° A-axis (table tilt) +30/-120 Spindle speed 35-10.000 1/Min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Nodpfetuwz Iox Abuolh Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: good (used), Year of construction: 1992, Mikron WF 3 DPM Tool Milling Machine Mikron WF 3 DPM with Heidenhain TNC 135 Control, Year 1988, Overhauled in 2014, Excellent CONDITION Technical Data: - Year of manufacture: 1988 / 2014 - Fixed angle table - Spindle speed: 31.5 to 3150 rpm - Stepless feed in 3 axes: 0 to 2000 mm/min - Travel paths X/Y/Z: 500/500/400 mm - Rapid traverse x/y/z: 3 m/min - Table size: 800 x 450 mm - Table load capacity: 250 kg - Vertical quill stroke: 90 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1950 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and Equipment: - Heidenhain TNC 135 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, control system manual, and programming examples - Handwheels - Coolant system Nodpjyxc Unsfx Abujlh About the machine: A Mikron WF 3 DPM tool milling machine with Heidenhain TNC 135 control is being offered. This universal milling machine is in excellent original condition. It comes from a workshop where it was used only occasionally for prototyping. The control system is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very easy thanks to the swing-away vertical head. The guides are lubricated regularly via central lubrication. The Mikron has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Mikron under power at our facility. You can find more milling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 960537, Offer 24514 Technical data: - Rated power at 50% duty cycle: 35 kVA - Adjustable reach up to approx. 520 mm - Opening width up to approx. 250 mm - Welding values up to: - Steel sheet: 4 + 4 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 2.5 + 2.5 mm - Welding current adjustable in stages - Electrode force at 6 bar: 300 daN - Required air connection: 6 bar - Cooling water flow rate approx. 4 l/min - Connection: 400 V - Space requirement approx.: W 670 x H 1550 x D 1350 mm - Weight approx.: 350 kg - Includes: Nedpfxo Afxk Ho Abuelh - NIMAK control unit - Electronic foot switch - Separate cooling water re-cooling unit

Year of construction: 1999, condition: used, Year of manufacture: 1999 Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Nedpfewnhicex Abuolh Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 56979, overall weight: 7,500 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, pressing force: 135 t, type of input current: AC, machine is functional ok, from down linear tool is one channal damage. perfect machine for starters or when a company have only periodic press jobs. Nljdpfx Aj Aarbhsbush we sale out by fact that we need the space. machine is unther still on power

Condition: ready for operation (used), Year of construction: 2007, HPM 12-33-2 two-roll machine, 3300mm wide, 1200mm diameter, steam-heated. Width approximately 460cm and length 8 meters. Nedpfxez Spu Ds Abuelh

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Nledpfehmvawjx Abuoh Main switch Synchronous welding control 8033 Weight: 740 kg

Year of construction: 1994, condition: used, Offered is a conventional universal milling machine. Travel X/Y/Z: 1120mm/320mm/470mm, spindle speed: 32-1600rpm, spindle speed steps: 18, digital readout system: Mikronel 320 T Type. Equipped with milling table, vertical milling head and manual controls. Inspection possible by appointment. Nlodpfxs Aba Sqj Abuoh

Condition: good (used), High-performance spot welding machine, 3-phase DC version, DALEX, type PMS 14-4 G3 Arm reach: 550 mm Rated power at 50% duty cycle: 240 kVA Nsdpfegqxg Aex Abuslh Secondary short-circuit current: 89.5 kA Secondary open-circuit voltage: 4.69 - 9.38 V Electrode force: 80-1200 daN With double-acting cylinder and feed stroke Lower arm support Weight: 1,660 kg Mounting control cabinet according to VDE 0100 Main switch 4-stage switch Synchronous 2-circuit welding control 8036 S3 Machine will be refurbished.

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA Nedpou A Dg Eefx Abuolh sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 520-003956, Lisec spacer bender Nljdpovktytsfx Abueh Printer for spacers not available

Year of construction: 2002, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 Schmedt Präzimark Hot Foil Stamping Machine (computer-controlled) Includes several type wheels/font sets. 670-4.3 Nedps Ad I Niofx Abuolh 670-5 E 648-17 pt available January 27 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Weight, including control cabinet: 80 kg Power type: Alternating current, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,000 h, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,600 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 46, tool weight: 8,000 g, number of axes: 5, This 5-axis MIKRON HPM 1350 U was manufactured in 2019. It features an impressive X-axis travel of 1350 mm, Y-axis travel of 1150 mm, and Z-axis travel of 895 mm. The machine includes a robust rotary table with a diameter of 1100 mm and a maximum table load of 1600 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON HPM 1350 U universal machining centre we have for sale. Contact us for further details. - Control Unit: Heidenhain iTNC 530 HSCI FS (MC 6541 with HDR and Core i7-3 1.7 GHz dual-core processor, 15.1" color TFT)- X-Axis Travel: 1350 mm- Y-Axis Travel: 1150 mm- Z-Axis Travel (Horizontal Spindle): 895 mm- Z-Axis Travel (Vertical Spindle): 700 mm- Motorspindle Overhang to Z-Axis: 700 mm- Swivel Axis A Range: +16° to -120° (136° total range)- Rotary Axis C Range: n x 360°- Simultaneous Axes: 5 / 5 simultaneous- Rotary Table Diameter: Ø 1100 mm (flattened on 2 sides to 1000 mm)- Table Centering: Ø 50 H6- T-Slots: 9 slots, 100 mm distance, 18 H12 width- Max. Table Load (Centered): 1600 kg- Table Clamping Moment: 8000 Nm- Table Drive Torque (100% ED / Max): 1130 Nm / 2300 Nm- Max. Table Speed: 40 rpm- Rapid Feed / Feed Rate (X, Y): 15 / 32 m/min- Rapid Feed / Feed Rate (Z): 15 / 32 m/min- Swivel Rate Feed / Rapid (A-Axis): 11 / 20 rpm (4000 / 7200 °/min)- Max. Feed Force: 10 kN- Acceleration: 4 m/s²- Spindle Speed: 0 - 15,000 rpm- Spindle Taper: HSK-A63 (DIN 69893-1)- Spindle Power (S6 40% ED): 38 kW- Spindle Torque (S6 40% ED): 193 Nm- Tool Magazine Capacity: 46 positions (HSK-A63)- Max. Tool Diameter: 80 mm (fully loaded) / 130 mm (partially loaded)- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Magazine Load: 200 kg- Chip-to-Chip Time: approx. 11 s- Coolant & Chip Management: Chip conveyor with Internal Coolant Supply (IKZ 18-80 bar, frequency-regulated), 30 µm band filter unit, hand wash station- External Coolant Supply: 7 bar, 28 l/min- Air Blast Through Spindle: Yes (up to 10 bar)- Measuring & Calibration Systems: Renishaw OMP60 HSK-A63 3D Infrared Touch Probe, Renishaw NC4 2-piece Laser Tool Measuring System, KinematicsOpt- Smart Machine Features: APS (Advanced Process System), ITC (Intelligent Thermal Control), DNC Remote Network Access, rConnect Live Remote Assistance- Operating Hours:* Control On (Steuerung ein): 46,889 h 58 min 07 s* Machine On (Maschine ein): 42,786 h 48 min 49 s* Program Run (Programmlauf): 9,929 h 46 min 01 s* Drives On (Antriebe Ein): 34,546 h 44 min 31 s* Spindle On (Spindel Ein): 5,660 h 25 min 27 s- Maintenance / Repairs Log Highlights:* Spindle replaced on 10.11.2021 (GF Spindle f. 2/782) with new assembly on 29.11.2021* Hard drive replaced on 23.12.2022* Drive unit replaced on 24.05.2023* Rotary feedthrough (Drehdurchführung) replaced on 07.09.2023* A-axis aligned and spindle adjusted on 21.02.2026- Operating Voltage: 3x 400 V (+6%/-10%), 50 Hz- Connected Load: 67 kVA / 61 kW (with IKZ)- Fusing: 125 A- Compressed Air Supply: 6 + 0.5 bar, approx. 300 l/min Nlsdjz R A Tdspfx Abush Technical Specification Taper Size HSK 63

Year of construction: 2006, condition: used, Year of manufacture: 2006 Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nlsdpfx Abjzry N Tjuoh Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, This listing is for the Pendotech PMAT3 Pressure Mat Sensor Monitor The unit is in full working condition and is ready for immediate use The PendoTECH PressureMAT (PMA23/PMAT) is a dedicated pressure monitor, alarm, and transmitter designed specifically for use with PendoTECH’s single-use pressure sensors in biopharmaceutical and laboratory environments. Here's a breakdown of its key functions and features: What It Does Monitor: Displays real-time pressure readings (range from approximately –7 to 75 psi, or corresponding bar values) on a user-friendly backlit LCD for applications such as filtration, chromatography, and bioreactor pressure monitoring Alarm: Users can configure minimum and maximum pressure set-points. If readings fall outside these thresholds, the device triggers alarms—via on-screen warnings, audio alerts, and relay outputs to control external pumps or valves Nlsdpfx Abjxhfq Ieuoh Transmitter: Delivers analog output signals (4–20 mA) and RS‑232 data outputs for integration into process control systems or PCs. Optional internal data logging may also be available Models & Capabilities Standard Units: Versions available for 1 to 4 pressure sensor inputs. High-Resolution (HR): Tailored for low-pressure applications, offering up to 10× better precision PLUS Series: More advanced models (e.g., PMAT2P, PMAT3P) support additional functionalities like flow meter inputs and total flow measurement, plus external analog input and broader integration options

Condition: good (used), Year of construction: 1999, pressure 135 t chamfer lenght 3600 mm distance between columns 3150 mm stroke of upper beam 200 mm ajustment speed 70.0 mm/sec working feed 10.0 mm/sec Nljdpoz Dkznjfx Abujh return speed 80.0 mm/sec 315 bar dayligth 400 mm table height 915 mm column arm 250 mm engine output 15.0 kW weight 8800 kg range L-W-H 4200 x 1700 x 2600 mm Equipment: - Electro-hydraulic press brake * with torsion bar - HACO NC control (Model ATL 550) for X and Y axes * Computer-controlled multi-axis NC press * Backgauge position pre-selection (electric backgauge) * Backgauge retraction for Z-bends * Bending depth pre-selection * Electric depth adjustment * Memory for 200 programs - Swiveling control panel (front left) - NC motorized backgauge (X-axis) * with 2 manually adjustable stop fingers - NC motorized depth adjustment (Y-axis) - 1x set of sectionalized "gooseneck" (swan-neck) upper tools - 1x rotatable MULTI-V die block - Rear safety guard (sliding door) - 1x mobile two-hand/foot control unit - 2x front support arms (custom-made) - Operating manual

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Nodpozn H D Nofx Abujlh Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. If you have any questions, please do not hesitate to contact us by telephone.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Njdpfxevrzake Abujlh Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.