Used Plantec Uk 352 P for sale (42,319)

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the Lasdpfx Aneidunvoxsg cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (partially solid materials). The machine is characterized by its ease of use, quick and convenient material changes, and simple miter angle adjustment. The UK 352 HA has a continuously adjustable miter range of up to 45° to the left and up to 0° to the right. The saw feed is automatically activated by pressing a button, and the material is clamped using two pneumatically controlled vertical clamping cylinders. A minimal lubrication system and an air spray gun for cleaning the machine are included as standard with this machine! Connections for a chip extraction system are also available on this machine. Equipment: • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Incl. 2 pneumatic clamping cylinders (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable material stop (rear) • Extraction device - chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade 350mm • Saw blade not included! Lasdegwt Rrepfx Anxsg You can visit our production facility/showroom at any time to view the desired system. Please feel free to contact us for this purpose. We look forward to hearing from you! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control Laodegwt Ryspfx Anxeg • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 M, manual The UK 352 M manual circular saw is an "upcut" machine and is mainly used for individual cuts in aluminium, copper profiles and hard plastics (requires solid material). The The machine is characterized by easy handling and fast, convenient changing of the material and simple adjustment of the miter angle. The UK 352 M has a stepless adjustable miter range left up to 45° and right up to 0°. The saw feed is manual via a hand lever, the material is clamped manually. equipment Double miter 45° - 90° - 0°, large support plate, powerful drive motor Clear control panel A manual clamping cylinder Fixed material feed jaw can be moved backwards to increase cutting capacity large protective hood, covers the entire work area Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Lajdpfx Aoidunnjnxsg

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Lajdjgwt Rvopfx Anxsg

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Lasdpoidun Defx Anxog Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel Lajdpfx Ansgwt Rnexjg • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously Ledpfx Anogwt S Eoxjag • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm Ljdpjgwt R Defx Anxjag • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Lajdpfeidun Isx Anxjg Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Lasdpfx Ajpa Nxdsnxsg Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Laedogcbwgopfx Anxog

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. Lasdpfx Anoy Efmgoxjg This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Year of construction: 2013, condition: good (used), industrial machine, K. Schulten KS AluKap DUO, designed for the production of armored roller shutters. The machine was manufactured in 2013. It has two automatically fillable containers for armor plating. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap DUO - Year of manufacture: 2013 - Machine No.: K 0132 - Maximum armor width: 3500 mm - Minimum armor width: 500 mm Lajdez Dftlepfx Anxog - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 160 l/min - Pressure of the pneumatic system: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, good The machine is available for immediate pickup.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Lsdpfoy Uni Njx Anxsag Video available on request.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 300 P, manual The UK 300 P is a manual table saw (pneumatic clamping) with simple safer Service! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK 300P has a compact design with clear operation. The saw cut is done manually by down into the material to be processed. The material is clamped using two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimum lubrication system and a fixed guard in front of the cutting area. equipment Compact, closed design with clear operation two pneumatic clamping cylinders Fixed protection from the cutting area Saw blade ø 300 mm Manual cutting feed Mist spray device for air-oil cooling workflow 1) Setting the cutting angle 2) Loading the material 3) Pneumatic clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Laedpfx Aeidqbbjnxog Please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 Lasdpfevw I Nisx Anxog 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: industrial machine K. Schulten KS AluKap 350-3, designed for the production of roller shutters with armored slats. The machine has been in use for 10 years. Technical data: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum slat width: 3500 mm - Minimum slat width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, operational. Lasdpfozxcn Ejx Anxjg Reason for sale: replacement with a newer model. The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net.

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Tracked excavator CAT 352-07 Laedpsz D R Egefx Anxsg The machine has only 5,300 operating hours and is in good condition Operating weight approx. 52,800 kg

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm Laodpfjzq U Syex Anxeg • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Splice detection: Yes Check for missing labels: Yes Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Condition: new, Year of construction: 2026, The UK-350-P is a manual table saw with simple, safe operation! Double miter cuts up to 45° right and left are possible with this machine. The miter adjustment is done here by turning the stop jaw. The UK-350-P has a compact design with clear operation. The saw cut is made manually from below into the material to be processed. The material is clamped pneumatically. Fixed protection from the cutting area. Laedpfx Anogcbuwsxjg

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Ledpsy A D Ecefx Anxoag Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Ledpfx Anjzy Iqboxoag Drive: Pumps/motor: 18.5 kW Heating power: 9,2 kW Total power: 27,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal Ledpfx Aezuzb Aonxoag 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Category: Used Mast type: 3F Lowered height: 3050 mm Lasdpfjzut Sysx Anxeg Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Year: 2015 Hours: 2089 hours Capacity: 24 V / 775 Ah - Hoppecke Options: FULL options - Mast = Triplex FFL - Equipped with side guidance & sensors (INCLUDING side roll / wheels & sensors!!)