Used Actini Effluent Treatment Skids for sale (1,028)

Year of construction: 2016, condition: excellent (used), Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage. Lasdpjw Dykwefx Anxsg

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Lsdpfx Aszt R E Ujnxeag With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Lasdjw Uf Ihjpfx Anxog Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Year of construction: 2013, condition: used, GEA Sour Cream Thermization Line Capacity: 1,500–2,000 l/h Year: 2013 Installed & Connected – Excellent Overall Condition Complete GEA Process Line We are offering a complete GEA Sour Cream Thermization Line originally designed for the thermal treatment of sour cream and fermented cream products. The line was installed in 2013 and remains installed and connected on site. It is available for inspection and can be offered complete with associated process equipment, automation, and technical documentation. The system was supplied as a complete GEA process line and includes a buffer tank, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and fully automated process control. Main Application Originally designed for: • Sour Cream • Fermented Cream (25% fat) Potential Applications • Kefir • Cultured Buttermilk • Drinking Yogurt • Ayran • Cultured Dairy Beverages • Other fermented and viscous dairy products Process Capacity • Approx. 1,500–2,000 l/h Original Process Parameters • Product: Sour Cream / Fermented Cream (25% fat)• Maximum product viscosity: 230 cP • Feeding temperature: 15°C • Thermization temperature: 55–70°C • Outlet temperature: 20–50°C Scope of Supply 1. Sour Cream Buffer Tank 10,000 L Stainless Steel Insulated Tank • Approx. 10,000 litre capacity • Stainless steel construction • Insulated design • Agitator with 5.5 kW drive • CIP spray balls • Temperature and level instrumentation • Hygienic dairy execution • Complete with service platform and access ladder Manufacturer: • PRO-WAM Year: • 2013 2. GEA Thermization Skid GEA Ecoflex Plate Heat Exchanger System Complete thermization module including: • Regeneration section • Hot water heating section • Cooling section with ice water • Integrated hot water circuit • Stainless steel skid-mounted designMain features: • GEA Ecoflex plate heat exchanger • AISI 316 heat transfer plates • Maximum working pressure: 10 bar • Hygienic dairy construction • Fully integrated process control 3. Pumps & Process Equipment Product Pumps • Tuchenhagen TP centrifugal feed/CIP pump • Tuchenhagen VPSH positive displacement rotary lobe booster pump Process Equipment • Stainless steel process piping • Automated sanitary valves • Distribution valves • Butterfly valves • Temperature instrumentation • Pressure instrumentation • Auxiliary process equipment 4. Hot Water Circuit Complete hot water generation and control package including: • GEA Ecobraze brazed plate heat exchanger • Grundfos circulation pump • Samson steam control valve • Samson on/off valve • Spirax steam equipment • Expansion vessel with safety module • Temperature instrumentation• Pressure gauge 5. CIP Dosing System Integrated CIP dosing and cleaning section including: • Dosing pump • Suction lances with level sensors Lodpezffzusfx Anxsag • Distribution valves • Water shut-off valve • Water reducing valve Designed for automated cleaning and sanitization of the process line. 6. Automation & Control Fully automated process control system including: • Siemens S7-315 PLC • Siemens MP277 10" HMI touch panel • Profibus / Ethernet communication • Automatic thermization control • Automatic CIP control • Alarm management • Process parameter monitoring • Data recording functionality • Festo pneumatic valve island • Stainless steel control cabinets Automation Level • Fully automatic production operation • Fully automatic CIP operation ...

Condition: used, Year of construction: 2018, functionality: fully functional, operating hours: 5,000 h, Continous Cast link belt Hardening & tempring furnace with online pre wash & post wash SCADA control fully automatic Ljdpfx Anezbiqgexjag

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) Lsdpfx Aeyc S Htenxjag If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Lodpfxezvdfte Anxeag

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Ljdpfxey Ai Hlo Anxsag

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Lsdpfx Aeymxqaenxeag Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 12 bar, operating pressure: 12 bar, overall weight: 2,000 kg, compressed air connection: 6 bar, Equipment: documentation/manual, RIEFILT Ultrafiltration System UF 25/10 – 25 m³/h High-Performance UF for Industrial, Process & Drinking Water Compact, fully automatic ultrafiltration system for the treatment of river, well, or process water with a capacity of up to approx. 25,000 l/h. The UF 25/10 reliably removes suspended solids, bacteria, microorganisms, and colloids, providing consistently clear filtrate—ideal as a stand-alone treatment unit or as a high-quality pre-treatment stage for RO systems. Typical Applications - Process water treatment in industry and commercial sectors - Filtration of river, surface, and well water - Premium pre-filtration for reverse osmosis systems (extends RO membrane service life) - Drinking water purification for industrial, municipal, or containerized solutions - Recirculation and polishing of industrial and rinse water Wherever secure water quality, high availability, and stable operating costs are required, this system excels. Technical Specifications (Summary) - System type: RIEFILT UF 25/10 - Capacity: up to approx. 25 m³/h raw water, approx. 23.5 m³/h nominal capacity Lasdpfxjwnbxdo Anxjg - Membranes: 10 × PVDF ultrafiltration modules - Operating pressure: approx. 1–3 bar (energy-efficient low-pressure operation) - Temperature range: approx. 0–40 °C - Power consumption: approx. 12.5 kW (base), approx. 15 kW incl. CIP module - Design: Stainless steel skid, industrial-grade piping and tanks - Designed for automated continuous operation, containerized, and modularly expandable System Concept & Operation - Pre-assembled skid system—plug & play, quick integration into existing setups - Automatic backwashing and CIP cleaning for minimal downtime - Freely programmable control, user-friendly operation, and clear process visualization - Low chemical consumption, optimized membrane lifespan, robust industrial construction Benefits for the Operator - High operational reliability: stable filtrate quality even with fluctuating raw water quality - Reduced OPEX: energy-efficient operation, automated cleaning, minimal personnel requirements - Flexible integration: as a stand-alone solution or high-end pre-treatment stage for RO / further processes - Future-proof: ideal for system expansions, container concepts, rental or multi-line solutions If interested, I am happy to provide the detailed technical datasheet, layout drawings, and a customized offer tailored to your application, including pricing and delivery terms. Please contact me directly via Machineseeker for further information, project discussions, or to arrange a viewing.

Condition: used, Year of construction: 2020, OVERVIEW This Permeare ADA 600-1000 ion exchange resin unit, manufactured in 2020, is designed for the treatment of food-grade liquids, especially wine and must. The system can be used for tartaric stabilization of red and white wines and musts by means of ion exchange resin technology. The machine is a compact, skid-mounted treatment unit with four vertical resin columns, stainless steel pipework, a dosing pump system and an integrated electrical control cabinet. The system operates with two resin columns working alternately, allowing one column to be in production while another column is regenerated. The process is controlled by PLC and monitored via a Siemens SIMATIC Touch Panel and a Mettler Toledo M200 analytical controller. The unit is manufactured with metallic parts in AISI 316 stainless steel, while the plastic parts are specified as suitable for food industry use. The resin volume is listed as 120 litres. The maximum column flow is indicated as approx. 40 hl/h. The machine is supplied with documentation including instruction manual, P&ID process diagram and electrical schematics. Laedpfx Anozh T R Aoxjg   TECHNICAL DATA - Manufacturer: Permeare S.r.l. - Manufacturer Location: Milan, Italy - Machine Type: Ion exchange resin unit / softening unit - Type / Model: ADA 600-1000 - Year of Manufacture: 2020 - Application: Ion exchange treatment / tartaric stabilization of wine and must - Process Principle: Ion exchange resin treatment with alternating resin columns - Resin Volume: 120 l - Resin Type: Type A - Resin Supply Form: OH- - Maximum Column Flow: approx. 40 hl/h - Flow Rate per Column: 4–10 BV/h - Dosing Pump: Chemical / regenerant dosing pump installed on skid - Maximum Operating Pressure, Process Side: 10 bar at 38°C - Maximum Design Operating Pressure: 10 bar - Maximum Liquid Inlet Pressure: 5 bar - Operating Temperature Range: 0 – 40°C - Storage Temperature Range: +5 – +50°C - Material, Metallic Parts: Stainless steel AISI 316 - Material, Plastic Parts: Suitable for food industry use - Skid Construction: Open stainless steel frame structure - Power Supply: 230 VAC - Frequency: 50 Hz - Nominal Power: 1 kW - Nominal Current: 4.2 A - Control System: PLC-controlled unit - Operator Panel: Siemens SIMATIC Panel Touch - Analytical Controller: Mettler Toledo M200 - Condition: Used, installed / as complete skid-mounted industrial process unit

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE Ljdpfsy Rmdwex Anxoag FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: used, System: Tricanter, 3-phase decanter, three-phase centrifuge Flottweg Z4D-4/441, used Year of manufacture: 1998 Bowl diameter: approx. 420 mm Laodpfxjy Eyf Do Anxsg Max. rotational speed: 3500 rpm Sediment density: 1.8 kg/dm³ Application: This powerful Flottweg three-phase decanter centrifuge is specifically designed for the continuous separation of solids and two liquid phases. Compared to standard decanters, this system offers significantly enhanced process capabilities, particularly when handling complex media. System: Complete skid-mounted unit Equipment: Flottweg three-phase decanter - electric drive unit - pump system - piping & valves - maintenance platform - complete skid assembly Typical applications: Oil/water separation - food industry (e.g. vegetable oils) - chemical industry - recycling & environmental technology - emulsion and sludge treatment

Condition: used, Year of construction: 2001, machine/vehicle number: 14873, LODIGE Coating and Enrobing Turbine Type LHC170 Year 2001 Partially perforated drum volume: 550 litres Drum material: AISI 316, K240 polished finish CIP system Batch size: 165–550 kg Sold complete with: - Turbine - Air treatment unit including: - 2-stage filtration (F8 + H13) - 1 preheating coil (steam) - 1 dehumidification coil (chilled water) - 1 main heating coil (steam) - 1 supply fan - Trolley with Watson Marlow spray pump (5 heads) - Dedusting unit - Air outlet filter - Exhaust fan - Sound attenuator - Electropneumatic cabinets - Siemens S7-300 PLC - Operator panel - PC with Lödige WinCC supervision software - Operator panel language: German and French - CIP skid with Prominent dosing pump - All necessary peripherals for operation: - Loading chute - Discharge chute - Sight glass cap - 5 spray nozzles - Flexible connection pipes for the CIP skid Dimensions: L3000 x W2300 x H2700 mm Weight of turbine assembly: 3 tonnes Complete documentation (in French) included: - P&ID - Drawings Ljdpswpwt Hofx Anxjag - Operator manual - Data sheets - Material certificates - Etc. Full program backup performed prior to machine shutdown.

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine Lasdpfoxqzmkex Anxsg CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: used, Used GEA Westfalia model FSD 1-06-107 stainless steel disc bowl centrifuge. Clarifier design with total capacity 1 litre and solids holding space 0.5 litre. Heavy liquid 1.0 kg/dm3 and solids 1.4 kg/dm3 solids. Maximum speed rated 10,000rpm. Centripetal pump output up to 300 l/h depending on medium. Belt driven by 1.1 kW 220/380 volt 3/50 3,000 rpm motor. Mounted on skid with HMI control panel and stainless steel collection pot. New 2018. Lsdpfx Anszimv Ujxoag

Condition: good (used), functionality: fully functional, High-quality industrial wastewater treatment system specifically designed for powder coating and metal finishing facilities. This system efficiently treats process water generated during pre-treatment, rinsing, and cleaning operations. It helps reduce operating costs, minimizes environmental impact, and supports compliance with environmental regulations. Key Features: Suitable for powder coating and surface treatment lines Efficient removal of heavy metals, suspended solids, oils, and contaminants Reliable and robust industrial design Low operating and maintenance costs Easy operation and maintenance Ideal for continuous industrial use Complete installation available, including tanks, pumps, piping, dosing system, and control panel (depending on configuration) The system is in good working condition and can be inspected while operational by appointment. Lodpfxozi N Dhs Anxoag Please contact us for technical specifications, additional photos, or a customized quotation. Worldwide shipping can be arranged.

Year of construction: 2026, condition: new, machine/vehicle number: AT111, New UHT tubular strilizer, homogenizer, CIP system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142°C (industrial steam ~6 bar), Cooling 142→27°C (water at 17°C), Final cooling 27→25°C (water at 17°C)Balance tank: 200 L, vertical cylindrical, AISI 304 stainless steel, with 3 level probes and CIP spray ballProduct pump: Stainless steel centrifugal, special high-temperature mechanical seal, operating pressure 5–10 barElectromagnetic flow meter: Flanged, 4–20 mA outputHot water circulation group: High-efficiency pump, 14–16 bar, 10,000 L/h; stainless steel expansion vessel; safety valve; automatic refill; steam–water tubular heat exchangerTemperature regulation: Pneumatic modulating steam valve; high-efficiency steam trapOn-board CIP: Conductivity measurement, 2 chemical dosing pumps, 2 x 150 L AISI 304 tanks (acid and caustic)Construction: Pre-assembled on AISI 304 stainless steel skid with adjustable leveling feetAdvanced Automation & Control SystemsThe system is equipped with a modern automation platform to ensure stable UHT processing, traceability, and consistent product quality.Control architecture: Integrated PLC with a 12-inch HMI touch screenCabinet layout: Two AISI 304 stainless steel enclosures (electronics and pneumatics separated)Electronics cabinet: PLC, HMI, power and automation componentsPneumatics cabinet: Solenoid valves and air distributionAutomated functions: CIP cycle management, pasteurization/sterilization control, temperature regulation, alarm handling, safety interlocksProcess data logging: Continuous monitoring of temperatures, product pressure, holding time, and flow rateInstrumentation: Electromagnetic flow meter with 4–20 mA output for robust feedback controlProduction Line Integration CapabilitiesDesigned for seamless integration into dairy processing, beverage production, and industrial packaging en... Laodpfxezmpzns Anxog

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Otherwise, the overall condition of the system corresponds to its original delivery condition. The system includes: Lodpfozbib Sex Anxjag Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 45 l, color: red, overall weight: 1,500 kg, empty load weight: 1,500 kg, lifting height: 2,472 mm, tire size: 26X12.00-12, number of seats: 1, Year of construction: 2025, load capacity: 700 kg, Equipment: additional headlights, all wheel drive, hydraulics, standard shovel, trailer coupling, The H&R 1507 skid steer loader is our smallest yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507 wheel loader lifts loads of up to 700 kg to a height of 2.47 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507 loader reaches a top speed of approximately 16 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machines have a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1507 • Technical and visual optimization in-house • Efficient engine made in Germany • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Ball-head trailer coupling • CE compliant (EU Machinery Directive) • 1-year spare parts warranty Price Net: €15,880.00 VAT: €3,017.00 € Gross: €18,897.00 Financing available! Optional Road legal available Delivery available Technical specifications Lifting capacity: 700 kg Lift height: 2472 mm (bottom edge of standard pallet fork) Unloading height: 1915 mm (standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Tires: 26 x 12.00-12 Dimensions: 2860 x 1160 x 2340 mm Weight: 1600 kg Laedpfx Aouqu Sgjnxeg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: used, Used Westfalia model CSA1-06-475 stainless steel clarifier centrifuge. Self cleaning bowl in steam sterilizable design. Internal pressure rated 1.5 bar pressure at 127 deg.c. Capacity rated approximately 13 litre. Unit includes 1.5kw, 1415rpm drive. All mounted on skid. Includes tools Laedpfx Aezvyi Uonxsg

Year of construction: 2007, condition: excellent (used), Aerzen GM60S blower unit, serial no. 868360 + 90kW motor Aerzen GM60S, serial no. 868360 / 61-223162/00, year 2007 Aerzen 90kW motor, serial no. 17279000 Lasdpfx Aoz Dtf Nenxjg

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Laedpozt Sb Dsfx Anxsg Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: new, Year of construction: 2010, functionality: fully functional, new, unused water treatment system (new in the original packaging) VEOLIA MIDI-RO 10-750-EP year of manufacture 2010 Ljdpfx Aszdri Nsnxeag 500 liters/hour energy-efficient reverse osmosis system

Condition: used, High-capacity industrial water treatment, filtration, and pressure boosting plant. This comprehensive system is composed of premium-tier components, primarily powered by high-efficiency Grundfos pumping stations and modular multi-port filtration vessels.The system is suited for manufacturing facilities, municipal water networks, food & beverage industries, closed-loop cooling systems, or large commercial properties. The Package Includes: 1. High-Pressure Vertical Multistage Pumps:Grundfos CR15-12 A-F-A-E-HQQE (Quantity: 1 units) Lasdpfx Asz Ahh Senxeg 2. End-Suction Centrifugal Pumps:Grundfos NBE40-160/158 A-F2-A-BQQE ((Quantity: 4 units on the pallet) 3. Filtration & Water Softening Unit:Multi-cylinder battery consisting of large blue composite pressure vessels (FRP tanks) for media filtration, iron removal, or water softening. 4. 2 units x Grundfos (Vertical Multistage Pumps). Condition: Used, as shown on photos. Stored in a dry indoor facility.