Used Agilent Lc/Q-Tof for sale (3,809)

Condition: used, functionality: fully functional, Agilent 6210 G3258A, G1969A Time of Flight Liquid Chromatograph Mass Spectrometer LC/MSD TOF. The Agilent TOF is an orthogonal-axis time-of-flight mass spectrometer (oa-TOF). That is, the ions reaching the time-of-flight chamber are impelled in a direction perpendicular to their original path. Fedpjt Ui N Ujfx Ahpspi You can set up an Agilent time-of-flight mass spectrometer system (TOF) in several configurations: -For normal flow LC/MS with a binary pump, quaternary pump, well-plate sampler (or autosampler) and ESI , APCI, APPI or MMI ion sources -For microflow LC/MS with a capillary pump, micro well-plate sampler and ESI, APCI or MMI ion source -For nanoflow LC/MS with a nanopump, micro well-plate sampler and nanospray source or dual nanospray source -TOF system with an AP-MALDI source Each system has advantages for drug discovery — high throughput sample screening with highly sensitive detection and accurate mass assignment. Features: ESI – Electrospray Ionization APCI – Atmospheric Pressure Chemical Ionization APPI – Atmospheric Pressure Photo Ionization MALDI – Matrix-Assisted Laser Desorption Ionization MMI – Multimode Ionization Good working condition. Please check out our other listings as well.

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Fpsdszg Tzxopfx Ahpji Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, Agilent G1956A LC/MSD VL + PC & software mass spectrometer. The Agilent G1956 LC/MSD Mass Spectroscopy Instrument is a highly reliable, laboratory-grade mass selective detector. The Agilent 1100 Series includes variable,multiwavelength, diode-array and mass selective detectors in addition refractive index and fluorescence detectors. Fodpfx Ajt Uk I Eehpopi The fluorescence detector, which has an innovative optical design, provides: • Simultaneous quantitative and qualitative information from up to four signals in a single run, saving time • Real-time spectra (similar to diodearray detection) for fast method optimization and peak identification. The mass selective detectors offer: • complete mass spectral information from the single-quadrupole LC/MSD and complete MS/MS data from the ion trap LC/MSD Trap • excellent sensitivity, reproducibility and ruggedness thanks to a patented orthogonal-spray ion source and highcapacity drying gas system. Good working condition. Please check out our other listings as well.

Year of construction: 2022, condition: used, functionality: fully functional, Selling a liquid chromatograph, SCIEX Triple Quad 6500+ with Shimadzu LC-40Dx3. Fpjdpfx Aheyw Nf Dspei Complete, well-maintained set; the instrument has not been fully utilized. Can be inspected in the laboratory. You are welcome to visit. Dismantling and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2017, operating hours: 13,000 h, Condition: very good. Fpedpfozb Sgwjx Ahpji Equipment: quick-change system OQ 80.

Condition: excellent (used), Year of construction: 2023, Dual-fuel burner Elco 3980kw EKEVO 7.3600 GL Weishaupt Fpsdjwrlayopfx Ahpei

Condition: used, Freshline freezer MP Fsdpfezh Elfox Ahpepi Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Condition: used, Model CES-LT-LIN-9x0.66-PODB-SH suitable for nitrogen all stainless steel belt width ± 660 mm Fsdpfozh Ekujx Ahpepi nett belt length 9.000 mm total length ± 10.500 mm dimensions (l x w x h) : ± 10.500 x 1.431 x 2.230 mm 12 kW product height: max. ± 120 mm

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm Fedpfszh Ei Rox Ahpspi 14 kW product height: max. ± 120 mm

Year of construction: 2022, condition: like new (used), Agilent Model: G9800A For sale: an Agilent Cary Eclipse Fluorescence Spectrophotometer – unused, in original packaging (without software). As far as we know, the item has never been used and is in new condition. The original packaging is included and may show minor signs of storage. Year of manufacture: 11/2022 Agilent Technologies Cary Eclipse Fluorescence Spectrophotometer Description: The Cary Eclipse G9800A is a high-quality fluorescence spectrophotometer for research, laboratory and industrial applications. It offers exceptional sensitivity, speed and ease of use and is ideal for applications in the fields of biochemistry, pharmaceuticals, environmental analysis and materials research. Technical data: Light source: Xenon flash lamp Wavelength range: 200–900 nm Measurement modes: Emission and excitation spectra Time-resolved fluorescence Phosphorescence Excitation-emission matrix (3D scan) Software: Cary Eclipse Software (not included) Detector: High-sensitivity photomultiplier (PMT) Scan speed: Very fast (up to 80 nm/s) Typical applications: Analysis of proteins, DNA, enzymes Detection of environmental contaminants such as PAHs Fluorescent dyes & markers Development of pharmaceutical active ingredients Manufacturer: Agilent Technologies (formerly Varian) Model: G9800A – Cary Eclipse Fluorescence Spectrophotometer Included: Device, power connection cable, manual Power supply / connection data: Power connection: IEC C14 socket (standard cold device plug, as used for PCs) → Connection via standard cold device cable Mains voltage: 100–240 V AC, 50/60 Hz (automatically switching) Power consumption: Approx. 150–200 W (depending on operating mode) Fuse: Internally installed, typically T2A or T3.15A Weight: approx. 28–32 kg Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone. Fodpfx Ahszia Iqjpepi

Condition: excellent (used), Keysight / Agilent InfiniiVision MSO-X 3034A Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Fpjdpfozh I Dwex Ahpoi Device Type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz For sale is a used Keysight / Agilent InfiniiVision MSO-X 3034A Mixed Signal Oscilloscope. This oscilloscope is suitable for precise signal and measurement tasks in development, laboratory, service, training, research, as well as industrial electronics and quality assurance. With 4 analog channels, 16 digital channels, and a maximum sampling rate of 4 GSa/s, the device offers versatile applications for demanding measurement tasks. Technical Data Manufacturer: Keysight Technologies / Agilent Technologies Series: InfiniiVision Type: MSO-X 3034A Device Type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog Channels: 4 Digital Channels: 16 Max. Sampling Rate: 4 GSa/s Display: Color display MegaZoom Technology Inputs: 4 × BNC analog Logic/Digital Input USB Host USB Device Trigger Out External Trigger / Calibration Connector Power Connection: 100–240 V AC Frequency: 50 / 60 Hz Power Consumption: max. 100 W Dimensions (W × H × D): approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels MegaZoom Technology USB Host USB Device Trigger and analysis functions Measurement, storage, and printing functions Carrying handle 3 probes as shown in the pictures Power cable Accessories as shown in the pictures Application Areas Electronics development Laboratory Service Troubleshooting Signal analysis Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of Delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3 probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used. Optical condition as shown in the pictures. Inspection seals/stickers as shown in the pictures are present. Scope of delivery as described and shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 2013, condition: used, This listing is for Agilent Technologies 2200 Tapestation The unit is in full working condition and ready for immediate use This automated electrophoresis system provides rapid, scalable analysis of DNA, RNA, and proteins. It accelerates sample quality control workflows using minimal sample volumes Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Fpedpfxszgfpnj Ahpji Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, collet chuck, tool holder, tool holder, milling chuck, milling tool -Manufacturer: Clarkson, 2 pieces collet chuck SK50 -Type: Autolock / Qualcut -Clamping sleeves: Ø 6/19/25 mm -Delivery/Price: complete -Transport dimensions. 300/190/H100mm Fodpeu T Tn Refx Ahpopi -Total weight: 11.4 kg

Condition: ready for operation (used), Year of construction: 2009, pressing force: 25 t, total height: 2,500 mm, controller manufacturer: CYBELEC, controller model: DNC 60, product length (max.): 2,300 mm, number of axes: 3, This 3-axis ADIRA QHD-2512 PLC press brake was manufactured in 2009. It features a Cybelec DNC 60 control unit, a pressing force of 245 kN, and a bending length of 1330 mm. The distance between columns is 1250 mm, and it operates at a working speed of 8 mm/s. If you are looking to get high-quality bending capabilities, consider the ADIRA QHD-2512 PLC machine we have for sale. Contact us for more information about this machine. • Distance between columns: 1250 mm • Number of CNC axes: 3 • Working speed: 8 mm/s • Main voltage: 400 V • Frequency: 50 Hz • Phase: 3-phase • Tool clamping type: PROMECAN Amada • Condition: Good, working condition • Status: Currently disconnected; possible to check under power Technical Specification Fpedozia Dfepfx Ahpsi Bending Length 1330 mm

Condition: like new (used), Year of construction: 2024, operating hours: 252 h, functionality: fully functional, machine/vehicle number: FTR-12-1315, working width: 1,200 mm, type of input current: three-phase, total length: 2,150 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 3,490 kg, input voltage: 400 V, workpiece height (max.): 150 mm, workpiece width (max.): 1,200 mm, space requirement width: 2,200 mm, space requirement height: 2,500 mm, space requirement length: 2,150 mm, Q-Fin F1200 Deburring and Edge Rounding Machine | Year of Construction 2024 | Only 252 Operating Hours For sale is a Q-Fin F1200 deburring and edge rounding machine in near-new condition. The machine was installed and put into operation by Q-Fin in December 2024 and currently has only 252 operating hours. The system is ideal for deburring, edge rounding, and surface finishing of steel, stainless steel, and aluminum parts. The combination of a belt grinding station, four disc brush stations, and a magnetic conveying system ensures uniform and reproducible processing quality. Equipment: • Magnetic system for safe workpiece transport • 1 belt grinding station • 4 disc brush stations Fpsdpfx Ahsza U Rcopei • HMI touchscreen control • Quick Lock Disc System • Automatic belt height adjustment at the 1st grinding station (AGS1) • SmartLink (IXON) for remote access, diagnostics and evaluation • IXON module already integrated Current configuration: • Grinding belt Cubitron II K120 • 4 x Brush Type QL Dark Brown K80 Additional accessories: • 1 x Grinding belt K80 Technical data: • Manufacturer: Q-Fin • Model: F1200 • Working width: 1,200 mm • Min. workpiece size: 80 x 80 mm • Max. workpiece width: 1,200 mm • Max. workpiece height: 150 mm • Net weight: 3,490 kg • Dimensions (L x W x H): 2,150 x 2,200 x 2,500 mm Location: Bünde, Germany Special features: • First installation by the manufacturer in December 2024 • Only 252 operating hours • Ready for immediate use • Very well-maintained condition • Inspection and demonstration possible by appointment We will gladly send further technical information, photos and videos upon request.

Condition: excellent (used), functionality: fully functional, overall weight: 38,500 kg, Year of construction: 2017, operating hours: 13,345 h, Equipment: quick-change device, Liebherr R946 NLC with auxiliary hydraulics, air conditioning, and Oilquick OQ80 quick coupler • Manufacturer: Liebherr • Model: R946 NLC • Year of manufacture: 2017 • Operating hours: 13,345 h • Weight: 38,500 kg • Bucket: 1.50 meters wide, with teeth and cutting edge • Power: 220 kW / 300 hp • Engine: Liebherr D936A7, 6-cylinder • Emission standard: Stage IV / Tier 4f • High and low speed gears • Quick coupler: Oilquick OQ80 • Mono boom • Central lubrication system • Demolition guard for the cab • 360° camera view with Skyview • Track condition: 85% • Air conditioning • Heated seat • Full service history at Liebherr • German machine • Ready for immediate use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions. Fpsdpfx Ahjw Rccujpji

Condition: ready for operation (used), Agilent / Keysight N3300A electronic load mainframe SN: MY41001791, used, in good condition, 100% functional, delivery as shown in the photos. Fpodox Eqrbepfx Ahpoi

Condition: used, Leybold A700 Q deposition system (ebeam) Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Fpsdpfxjuhcnio Ahpsi Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 37.500,-

Condition: like new (used), Year of construction: 2024, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only been used as a test model and is therefore in excellent condition. You are always welcome to visit our showroom in Bergeijk to take a look. 2024 Deburring and Finishing Machine F200 XL with vacuum support. Suitable for deburring, rounding, and/or grinding steel cut parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products, from a euro coin to 200 mm wide, can be processed on this small but powerful machine. At the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by two oscillating cup brushes that apply light pressure. The brushes ensure a uniform rounding of all edges and holes, both around and within the flat-ground product, leading to the most optimal finish. The F200 XL offers options for automatic brush calibration, which ensures constant consistency and precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, manufactured in 2024, which can optionally be combined with a WES3000 wet-dust extraction unit and associated piping. Available only until it is sold. Fpedpfx Ajyt I U Uehpei The machine is supplied with a 1-year warranty, excluding wear parts. Delivery is ex works Bergeijk. If desired, we can also offer the machine including transport, installation, and training of your operators on-site. We also have a lightly used F200 XL machine with magnetic product fixation available, manufactured in 2023. This machine can be viewed in the showroom in the Netherlands. Contact us, and we will send you an interesting offer.

Condition: used, functionality: fully functional, machine/vehicle number: MY45044074, Agilent 3458A 8-1/2 Digit Multimeter with GPIB Interface Achieve the highest precision with the Agilent 3458A Multimeter, an 8-1/2 digit instrument designed for professional applications. This multimeter is characterized by its impressive measurement accuracy and robust design, making it ideal for use in industrial and research settings. With its intuitive user interface and fast display of measurement values, it is the perfect tool for experts who value reliability and accuracy. Fpjdpfx Ahjzhmb Iepji

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. Fjdpfx Asl Dw D Eohpopi With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: excellent (used), power: 122 kW (165.87 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 8,582 h, Equipment: air conditioning, Empty weight: 25.000 kg Dimensions (LxBxH): 889 x 298 x 308 cm Engine type: Caterpillar C4.4 Mast: articulated arm Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Central lubrication - Hammer/sorting function - Hydraulic quick coupler - Radio - Rotation function - Two Speed - Work lamp(s) = Remarks = Fpjdpfjw U Df Eex Ahpsi Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Japan Condition CE type: CE OQ70/55 Oilquick quick coupler, 600 mm track shoes, bucket with teeth, transport width 300 cm

Condition: used, This listing is for the Agilent 34970A Data Aquisition Switch Unit Fpodex Szacjpfx Ahpoi The unit is in full working condition and is ready for immediate release. The Agilent 34970A Data Acquisition/Switch Unit is a modular test and measurement instrument designed for data logging, signal measurement, and flexible switching in lab, production, and automated test environments

Condition: used, This listing is for the Agilent 34970A Data Aquisition Switch Unit The unit is in full working condition and is ready for immediate release. The Agilent 34970A Data Acquisition/Switch Unit is a modular test and measurement instrument designed for data logging, signal measurement, and flexible switching in lab, production, and automated test environments Fjdpsx Npy Eefx Ahpspi

Condition: used, empty load weight: 7,440 kg, maximum load weight: 31,560 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2015, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. Features: Alloy wheels, 3 axles, BPW axles, air suspension, first axle liftable, last axle steered, raise/lower function, ABS (anti-lock braking system), Edscha sliding roof, curtain sides, doors, coil well, lashing rings, underrun protection, lateral aluminum side guards, support legs, storage box. Fpodpfxowzyq Ee Ahpoi Superstructure: Krone trailer with sliding curtains on both sides, coil well and Edscha sliding roof, 3x 9t BPW axles, first axle liftable, disc brakes, coil well approx. 8,840 mm long, 10 pairs of heavy-duty lashing rings recessed in the floor, stake pockets 81 x 81 mm in the outer frame, 30 mm thick waterproof flooring, Edscha sliding roof, Multilock outer frame with universal load securing options every 100 mm, steered trailing axle lockable! Clear loading height at rear portal approx. 2,600 mm! Corner dimension approx. 2,040 mm! Unladen fifth wheel height approx. 1,150 mm! Spare wheel available for an extra charge! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!