Used Agm 3 Tand for sale (67,679)

Condition: used, Year of construction: 2024, New: Yes Colour: Red Working width: 180 cm Isdpfx Aaox I Dtde Rstl Operating depth: 700 mm

Condition: good (used), Year of construction: 1994, Panel saw Itodpfoyiazvex Aa Rsl Manufacturer: Striebig Model: Standard 3 TRK 6220A Year of manufacture: 1994 Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 80 mm Power: 4.4 kW Speed: 4,750 rpm Two small notches in the rear area of the saw blade shaft. Lower guide for the saw blade guard is missing.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Iedpfx Aaozd Rmgj Rotl Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 Itodpfx Aaeylt Uko Rsl - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Itjdpfx Aezzbcyoa Rol MACHINE DETAILS Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Vacuum pump Tools

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Isdpfx Aswpunbsa Rstl Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Condition: ready for operation (used), Year of construction: 2016, Working conditon. Ready for delivery. Itedpfx Aaozzlbyj Rol

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Number of axes: 4 Table length: 1,500 mm Table width: 660 mm Iodpfszzbbcsx Aa Rotl Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Power: 38.4 kW Tool magazine capacity: 32 MACHINE DETAILS Control system: Fanuc 18i-MB Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Iedozx S E Tjpfx Aa Rstl Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,765 h, Behringer HBP 263 AG fully automatic metal bandsaw (2008) Manufacturer: Behringer Itsdpfx Aozwhdpea Rol Model: HBP 263 AG fully automatic metal bandsaw Year of manufacture: 2008

Year of construction: 2018, condition: new, NEW PLATE SHEAR! MSE HILALSAN AGM-3006 MSE machines has established itself as a reputable name in the field of service and retrofitting for press brakes and shears. For some time now, MSE has been offering used press brakes and shears. These machines are often upgraded with a new Delem control system and PLC to meet modern standards, ensuring years of trouble-free operation. Recently, we have started offering new press brakes, plate shears, and profiling shears. Due to our many years of experience with sheet metal processing machines and the relevant technical knowledge, we are convinced of the quality of the HILALSAN brand. Itedpegbkvgefx Aa Rjl HILALSAN AGM-3006 Cutting capacity: cutting length 3100mm, sheet thickness up to 6mm Equipped with the following options: Elgo P40T CNC cutting clearance adjustment CNC cutting length adjustment CNC cutting angle adjustment AC servo motor for ball screw spindle on the back gauge Rear safety guard Finger guard along the entire length, foldable We can also offer you: Shears with a cutting length of up to 8100mm and a sheet thickness of 20mm. Press brakes with a bending length of up to 6100mm and a pressing force of 1250 tons. Tandem configuration is also an option. Profiling shears with single or double cylinders, allowing operations to be performed simultaneously by two people. Up to 175 tons of pressing force. Various options are available for all machines.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 3 kW Dimensions & Weight Iedpfx Aozza U Uoa Rotl Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Condition: used, machine/vehicle number: 008379, Squaring: First and Second Pass Iedozvwp Espfx Aa Rjtl Max Panel Thickness: 35 mm Max feed speed: 30 m/min Distance between dogs: 320 mm

Condition: used, maximum load weight: 7,400 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 07/2000, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, Year of construction: 2000, Equipment: ABS, Stock No. 5884 Approx. 5.00m Müller-Mitteltal 2-sided tandem tipping trailer with folding ramps ----* Manufacturer: Müller-Mitteltal * Type: ETK-TA-S * First registration: 07/2000 * Gross vehicle weight: 11,000 kg * Unladen weight according to vehicle registration document: 3,600 kg * Payload: 7,400 kg * Axles: 2 x BPW / drum brakes * Suspension: leaf spring suspension * Tires: 235/75 R 17.5 approx. 50% remaining * Color: Chassis grey, tipping body red * ABS * Internal dimensions of tipping body: approx. 5.00m long x 2.42m wide, side walls 0.40m high * Mechanical, 2-part ramps (2.10m + 1.30m = 3.40m) * Steel floor with 4 pairs of folding lashing eyes Ijdpfxjz A Nwfj Aa Rstl * 40 mm drawbar, height-adjustable * Quarter fenders, 2nd axle * Spare wheel holder * LED reversing lights * 2 x LED work lights, front * Full-load support, front * Additional supports, rear German trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Itsdpfx Aowplgbja Rsl Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Iedpfx Aaezx S Ius Retl Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 375 kg, load capacity: 3 kg, For sale is a stand-alone handling machine of the Engel brand and type ERC 13/12-F Ijdovgc Skjpfx Aa Retl The handling unit is ready for immediate use and fully functional after assembly Technical data Year of construction: 2010 Max. handling weight: 3.5 kg X-stroke: 400 mm Y-stroke: 1,000 mm Z-stroke: 2,240 mm Y-axis: Single stroke B-axis drive: Pneumatic B-axis torque: 5 Nm Servo axes: 3 Pneumatic axes: 2 Compressed air circuits: 2 Valve positions: 6 required DI(UEK): 8 Stand height: 375 mm Connection data: 3*400 V /50HZ/16 A Rated current: 10,000 A Shelf height 900-1200 mm (depending on installation height) On request, transportation and loading can be arranged at extra cost. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2016, Equipment: all wheel drive, This machine has just arrived at our facility: Liebherr wheel loader L 526 Z 2 plus 1? In good condition? Excellent features? Looks like new!! Liebherr service maintained? Service history stored on the Liebherr central computer! All major services performed by Liebherr. VIN: VATZ1558PZB0444200 Year of manufacture: 2016 First put into service: 2017 Operating hours: Original 10,566 hours, verifiable! Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 136 hp, emission stage TIR IV (Note: Brochure = TIR V!!!) Hydrostatic drive with 3 driving ranges, driving speeds: Range 1: 0 - 6.0 km/h, Range A1-2: 0 - 16.0 km/h, Range A1-3: 0 - 20.0 (40) km/h (currently limited to 20 km/h!) * Standard Z-linkage * Quick coupler with hydraulic attachment kit, 3rd hydraulic circuit for tipping/grabbing/or 4/1 bucket with multi-quick coupler, towing hitch at the rear, ride vibration damper, linkage vibration damper, automatic central lubrication system - factory installed by Liebherr, air conditioning, automatic climate control - automatically maintains temperature, step for easier cleaning of the windshield, steel lamp mounts instead of plastic, folding and heated exterior mirrors, tilting window on the left/driver's door, premium display with touchscreen, driver's seat "Comfort" with pneumatic suspension, seat heating and headrest, Comfort radio with hands-free system, 2 work spotlights on the cab roof at the rear (LED), 2 work spotlights on the cab roof at the front (LED), fuel filter with pre-filter, air intake with pre-separator - TopAir, reversing fan for blowing out the radiator, interior mirror, adjustable steering column, pre-installation for rotating beacon - flashing light, folding upper section of the cab in the center, rear view monitoring with camera - monitor in the display, crane/tie-down eyes at the rear and front, protective ventilation system. Tires 17.5 x 25 L3, front: 2 x 60% Tires 17.5 x 25 L3, rear: 2 x 60% Offer with quick coupler and bucket - at a price of €62,900.00 net. Additional equipment available at an extra cost: * Tipping bucket from 2.5 to 4 cubic meters from €4,950.00 * Bucket with bottom holder for quick coupler from 3.5 cubic meters €3,660.00 * 4-in-1 bucket 2 cubic meters, upon request. * Pallet fork 5 tons from €1,850.00 If desired, also available with a used scale! Pfreundt WK 60 (calibratable) - €5,900.00 Printer for the scale, price upon request. Prices net + VAT or for export. Note: The brochure only approximately corresponds to the offered machine!!! (Brochure is for machines from the year of manufacture 2019 onwards with engine emission class V) Itjdpfx Aez A Nqroa Rsl Sale only to business customers or for export. Sale in the condition as is. No guarantee or warranty. The specified mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 Ijdpexd Ubnjfx Aa Rstl 1 X Comek vertical form, fill and seal bagging machine. Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: used, Manufacturer: KHALMANN Type: AGM 10 Load capacity: 75 kg Outreach: 4200 mm Iedpfozxqw Ujx Aa Retl with magnetic adapter

Condition: good (used), Year of construction: 1964, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 320 x 950 mm Itjdpozkqt Hefx Aa Rsl -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg

Condition: used, Manufacturer: KHALMANN Itjdpfxezxqzys Aa Rjl Type: AGM 10 Load capacity: 75 kg Outreach: 4200 mm with pneumatic gripper adapter

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, gear diameter: 300 mm, controller model: Optronic CNC D140, workpiece width (max.): 2,300 mm, workpiece height (max.): 500 mm, center height: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gear diameter: 300 mm Isdpfxezzba So Aa Retl Module range: 0.5–8 mm Pressure angle: 35° Max. workpiece width: 2,300 mm Max. workpiece height: 500 mm Max. workpiece weight: 100 kg Center height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm MACHINE DETAILS Control system: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Shipping packages: 5 units

Condition: used, SCHNELL Straight and cut OPTIBAT 65T/3/14 Length of OPTIBAT: 14 m Feeding unit driven by servomotor: 160 m/min 3 Additional cutting level testing photocells. OPTIBAT is very precise Side gangway with safety rail Kit for outdoor positioning Length of OPTIBAT: 14 m Feeding unit driven by servomotor: 160 m/min Iedpfx Aaoymcdko Rjtl Additional cutting level testing photocells: 3 (OPTIBAT is very precise) Side gangway: with safety rail Kit: for outdoor positioning

Year of construction: 1991, operating hours: 19,888 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1.844, MACHINE DETAILS Itsdpfezxcl Rox Aa Rsl Control system: CNC Operating hours: 19,888 h