Used Allgaier Allgaier Recycling Separation Screen for sale (10,834)

Year of construction: 2000, condition: new, Separation screen ALLGAIER ARSM 31-2, suitable for screening, separation, and recycling. Dsdpsx Hh H Eefx Ahfjuu

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Dujdpfx Aey N Rlvjhfou The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: like new (used), Year of construction: 2022, operating hours: 1,335 h, functionality: fully functional, For municipal waste. Spliter 425 unit: Width 2500 mm. Length 4000 mm. 16 shafts. Acceleration belt 3100 mm. Positioned at 25 degrees. Width 1200 mm, effective 1050 mm. Speed from 1 to 2.5 m/s. Total consumption 11 kW. Approximate dimensions: 6685 x 2720 mm. Height 676 mm. Approximate weight 9 t. Dujdjy Sgk Hopfx Ahfju

Year of construction: 2008, condition: used, machine/vehicle number: 51E361-010-02, IFE Processing Technology Year of manufacture: 2008 For sale: 2 identical screens, each equipped with 2 unbalance motors. The price is for 1 screen. Djdexztbhjpfx Ahfeuu

Year of construction: 2025, operating hours: 1,050 h, condition: reconditioned (used), functionality: fully functional, Alzinger Lepton 5100 – Solution for the Bio-waste Ordinance (BioAbfV) Ideal for organic waste separation: Easily meet the statutory 1% threshold! From May 2025, organic waste may only be treated if the contaminant content is below 1.0% by weight. Our Lepton 5100 has been specifically designed for this requirement. Lepton 5100 Advantages: Separation instead of Shredding - Gentle Bag Opening: Waste bags are reliably opened without shredding the contents. A pre-shredder (slow-speed) is not required! - Maximum Film Size: Plastic films remain largely intact and are efficiently removed during the first screening process, before they can fragment in the compost windrow due to turning, heat, and UV exposure. - Highest Purity: Prevents microplastics in the process and ensures high end-product quality. Economic Efficiency: Dujdpfsy Elwfsx Ahfju - Legal Compliance: Reliably stay below the 1% threshold required by the BioAbfV. - Process Optimization: Reduced effort in post-cleaning. - Cost Efficiency: Significant savings on diesel and wear costs since no pre-shredder is necessary. - Integrated Air Separator: No need for bulky auxiliary machines. Saves space and maintenance costs. Innovative Process (Flexibly Controllable): - Organic Waste Processing (2-fraction mode): Reversible mid-size discharge belt brings together medium and fine fractions for a homogeneous mix. Result: Clean target fraction for digestion/composting plus coarse fraction with films/contaminants. - Compost Refinement (3-fraction mode): Separation into premium compost, structural material, and energy wood. The ballistic separation effect removes stones, glass, and hard plastics via the stone fraction belt. Integrated air separators remove any remaining film residues. Current Application: Successful organic waste processing for wet digestion. The machine delivers a contaminant-free, homogeneous fraction for the fermenter, preventing the formation of sink or floating layers. Inspection & Demonstration: Live demonstration available at our partner facility in the Kelheim district. Processing steps can be discussed directly with the plant operator. Technical Data: - Model: Lepton 5100 | Year of manufacture: 2025 | Approx. 1,050 operating hours - Location: D-84069 Schierling | Availability: Short notice - Screen Decks: Deck 1 (52mm), Deck 2 (43mm) - Equipment: Variable dosing roller, volume measurement, air separator preparation, compressor, LED lighting package, radio remote control. - Drive: Diesel-electric (Perkins 58kW, no AdBlue) + external power supply option (400V 63A). - Transport Dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). - Screening Materials: Compost, green waste, biomass, wood, municipal waste, RDF. - Condition: Very good, fully operational. The machine will be completely overhauled by us before sale.

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Dsdpfx Ajyi Ex Nshfjuu

Condition: excellent (used), functionality: fully functional, Trendelkamp Separation Table / Vibrating Sieve Machine – 3 Fractions For sale is a Trendelkamp separation table, model TK-K60/85, weight 200 kg. This machine is designed for the precise separation of bulk materials into three fractions by means of vibration and screening. Technical data: • Manufacturer: Trendelkamp Stahl- und Maschinenbau GmbH + Co. KG • Model: TK-K60/85 • Weight: approx. 200 kg • 3-fraction separation • Driven by electric motor with unbalance drive • Robust steel construction, screen decks made of stainless steel • Screens can be easily replaced upon request (different mesh sizes available) Areas of application: Dujdpfxjw Ip Dte Ahfou Ideal for plastic granulate, recycling materials, pellets, bulk materials, and other applications requiring separation into three size classes. The machine is immediately ready for use and in good condition.

Year of construction: 2022, operating hours: 2,896 h, condition: reconditioned (used), functionality: fully functional, Model: Lepton 2100 Year of Manufacture: 2022 Screening Hours: approx. 2896 hrs Engine Hours: approx. 3486 hrs Location: D 84069 Schierling Availability: short-term Equipment: - Base machine Lepton 2100 with Screen Deck 1 (optionally upgradable to a second screen deck) Screen Deck 1 spacing: 70 mm - Tracked undercarriage - Pre-screen deck with long hopper and accelerator belt - Radio remote control for all key adjustments - Diesel-electric drive 80 kW - Level compensation - 18,500 kg total weight - Transport dimensions: 11.97 m overall length, 4.10 m height, 2.53 m width Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recycling materials (not suitable for construction debris or excavated earth) Dodpfx Ajwlt N Nohfsuu Other: Very good used condition, fully operational

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Duedsxy Rddopfx Ahfju Available immediately

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Available immediately Dusdpfjxy Iikjx Ahfsu

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. Dedpfxovf E Avs Ahfouu We accept no liability for the technical specifications or any errors.

Condition: new, Year of construction: 2026, functionality: fully functional, The STF 3.0 float-sink separator with a highly efficient SP1000 Mk2 centrifuge and VS1 water screen. A compact yet powerful washing system that requires little maintenance and can wash and sort up to 3,000 kg/h of hard plastics. Duodpfx Ahsxhf H Nofju The machines are constructed entirely from 304 stainless steel, allowing salt solutions to be used without any issues. A zinc float tank with centrifuge, water screen and big bag station is in stock and available for immediate delivery; further machines are available to order. Please contact us for further information.

Condition: used, Year of construction: 2002, - Light source: 16-channel infrared laser diodes - Minimum plate size: 324 x 370 mm - Maximum plate size: 830 x 660 mm - Resolution: 2400/2438/2540 dpi - Media type: infrared thermal plates - Media thickness: 0.15 to 0.3 mm - Productivity: 10 plates per hour at 2400 dpi Duodjwv D Dxspfx Ahfju - Dimensions: 1750 x 1030 x 1178 mm - Weight: 645 kg

Condition: used, Year of construction: 2008, only approx. 20K plates done RIP York Workflow Inlinepunch 425 Dujdpfx Ahoza A D Defou Azura C95 Clean out unit Available: at short term

Condition: used, Year of construction: 2023, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: C.009088, total width: 5,536 mm, total length: 5,536 mm, total height: 3,500 mm, Equipment: rotational speed infinitely variable, For any further information regarding this listing please contact Dedpjy Dtyrefx Ahfeuu

Condition: new, Year of construction: 2026, functionality: fully functional, 600 HD available immediately Serialnumber 965 Special price from our stock 06188 Landsberg, Germany Dsdpfxsib Ircj Ahfouu The 600HD alligator shear is a fast and strong metal cutting shear with an extended hold down clamp, making it ideal for every cutting and cleaning task whether cable, plastic sections or window frames. Its cutting capacity is up to 63mm, 2″ inch mild steel round bar. The 600HD alligator shear is probably best known for dealing with car radiators. It was designed and built following requests from customers who were looking for a shear with a longer blade to cut larger items such as car radiators which it cuts through in one pass. The automatic hold down clamp holds material in place during the cutting cycle and prevents kick back which speeds up processing and improves operator safety. As with all McIntyre shears, opening and closing the jaws is controlled from a moveable foot pedal. As soon as the foot pedal is released, the cutting blades return to the open position. However, a continuous cutting action can be achieved by keeping foot pressure on the pedal. The 600HD can be supplied with an electric motor or with a 2-cylinder diesel engine.

Condition: refurbished (used), functionality: fully functional, JMC 200 B Immediat delivery from our possible. Fully serviced. New condition McIntyre’s wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In Dsdjin N Tdjpfx Ahfeuu most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it.

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum Dedpfxofh Dmzs Ahfjuu PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Year of construction: 2007, condition: good (used), machine/vehicle number: 10369, Thermal CTP PT-R4300 E: Computer to Plate Recording System: External Drum 2 x SA-L4100 Single Autoloader: Fully Automatic loading of 50 Plates & automatic interleaf removal PST 26 Plate Stacker Bacher Punch 425 for PT-R4000 ADARA TH 85: Cleaning and Gumming unit for chemistry-free thermal CTP Plates Technical Details: Throughput option (plates/h in max. format) : 10 Plates / Hour Light Source: 16-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Resolution : 2,400 - 2,438 - 2,540 dpi Dedpsfh Dm Nefx Ahfeuu Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: used, Year of construction: 2018, only approx.16K plates done Format 830 x 660 mm Apogee Workflow RIP Inlinepunch Azura C95 Clean out unit Stacker ST 95EX Duedpfx Aeyt I Unjhfou Available: at short term

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Dusdpfxex It N Us Ahfju Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Condition: excellent (used), Year of construction: 2012, CTP imaging system: Screen 8600 S / AGFA Avalon N8 22, equipped with an automatic SA-L feeder and an on-line developer. Dujdpfx Ahozcdvmsfsu The system includes Apogee software, version 10.

Year of construction: 2026, condition: new, original Screen laser diodes 100212447V01 Diode fiber 500 mW Dodpfedmdvvox Ahfeuu for Screen PT-R8600 & OEM (64 channel) new & second-hand All offers subject to prior sale

Condition: new, functionality: fully functional, Year of construction: 2026, RSS 600 series Mono Rotor Shredder new model 2026 Duedpfxeirt H As Ahfeu 18.5kw Screen size in consultation Motor cover, pusherbox guide strips, PLC controlled. Conveyor and/or discharge screw is optional available. suitable for various types of plastic/wood/or other material Delivery in consultation Larger or smaller models also available. Intrested ?, reactions with your name, company name and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Dujdpfx Ahot Iwt Uefju reactions or questions ? please with full name, company name and phone number.