Used Altendorf F 45 Evo Drive for sale (54,505)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm. Ljdpfx Adew I Uxcsterk

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, tilt adjustment saw blade: 46 °, height adjustment type: electric, table height: 910 mm, We are offering this as-new Altendorf F45 Evo Drive panel saw, year of manufacture 2023. ALTENDORF F45 EvoDrive Panel Saw – 2023 Model – Excellent Condition Precise and immediately ready for use Year of manufacture: 2023, equipped with modern control technology and high-quality standard configuration. The machine has been carefully used, is in very good condition, and offers maximum precision for professional applications in joinery, furniture, and interior construction. Equipment & Technical Data Carriage length: 3000 mm Cutting length: 2905 mm Working height: 910 mm Main saw blade swivel range: 0°–46° Serial no.: 23-02-12-050 Highlights of the base machine: Double roller carriage (standard) with 3000 mm carriage length Electromotive height and swivel adjustment 0°–46° Automatic cutting height correction when swiveling Eye-level, swiveling control panel Large 7" touch display with separate keypad Precise input for height, tilt, and diagonal measurements Digital display for height and tilt angle Simple axis calibration Condition The machine is in excellent technical and visual condition, is fully functional, and ready for immediate use in production. Payment & Collection Payment: Bank transfer prior to collection Collection: Handover after full payment Inspection: Possible before collection Transport / Loading: By the buyer (assistance on site available) Available from: June 2026 If you have any questions or require further information, please send us a message or give us a call. Lodoyu Ufvjpfx Adtjrk

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 150 mm, cutting width (max.): 1,000 mm, cutting length (max.): 3,200 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* Lrjdpfx Adjxuqulstok - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: good (used), Year of construction: 2018, power: 7.5 kW (10.20 HP), Equipment: CE marking, rotational speed infinitely variable, saw blade guard, The F45 ProDrive panel saw is a powerful and precise sliding table saw. The machine has a current list price of approximately €52,000 net. + The 7.5 kW Vario motor provides flexibly adjustable speed and enables clean cuts even on large workpieces, with a saw blade diameter of up to 450 mm. + The double roller carriage (3000 mm) featuring TIP-SERVO-DRIVE allows for smooth and controlled movement of heavy panels using a joystick. + The CNC rip fence (1300 mm) is automatically set with high precision, increasing repeat accuracy. + The Digit L digital crosscut mitre fence (3200 mm) enables digital angle adjustment and precise mitre cutting. + The air cushion table makes repositioning large workpieces virtually frictionless. + The spray device (switchable on/off via remote control) improves cutting quality and reduces friction. + The extension table (840 mm) and the front support roller provide additional support for long materials. + The pneumatic quick-clamps (2 pcs., 0–90 mm) securely and quickly fix workpieces, making operations more efficient and precise. *Format panel saw F45 ProDrive *Motor 7.5 kW Vario *Max. blade diameter: 450 mm Lsdpfx Adey Enw Iotsrk *Double roller carriage, 3000 mm length, with TIP-SERVO-DRIVE *CNC rip fence, 1300 mm *Digital crosscut mitre fence Digit L, 3200 mm *Air cushion table *Spray unit with remote control *Extension table, 840 mm *Front support roller *Pneumatic quick-clamps, 2 pcs., 0–90 mm

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, The F45 ProDrive sliding table saw is a powerful, high-precision machine with a current new price of over €52,000 (net). It is ideally suited for precise and largely automated cutting of sheet metal, aluminum, and other light metals. + The 7.5 kW Vario motor provides flexibly adjustable speed, enabling clean cuts even on large workpieces with a blade diameter of up to 450 mm. + The double roller carriage (3,000 mm) with TIP-SERVO-DRIVE allows for effortless and controlled movement of heavy panels using a joystick. + The CNC rip fence (1,300 mm) adjusts itself automatically with high accuracy, increasing repeatability. Lredey Enugspfx Adtek + With the Digit L mitre fence (3,200 mm), angles can be digitally set and cut with precision. + The air cushion table makes moving large workpieces virtually resistance-free. + The spray unit (remotely controlled ON/OFF) ensures better cutting quality and reduced friction. + The table extension (840 mm) and the front support roller provide additional support for long materials. + The pneumatic quick clamps (2 pcs, 0–90 mm) secure workpieces quickly and reliably, boosting efficiency and accuracy. F45 ProDrive Sliding Table Saw Motor: 7.5 kW Vario Max. saw blade diameter: 450 mm Double roller carriage with 3,000 mm carriage length, TIP-SERVO-DRIVE CNC rip fence 1,300 mm Digit L mitre fence, 3,200 mm Air cushion table Spray unit with remote control Table extension 840 mm Front support roller Pneumatic quick clamp, 2 pcs, 0–90 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, F45 Pro Drive - Year of manufacture: 2017 - Top control panel - 3200 mm - Saw blade diameter: 500 mm - 5.5 kW - Scorer preparation - Digital display on parallel fence - Cutting width 1100 mm to the right of the blade - Paper template holder - Angle display on cross slide - Duplex mitre fence Ljdpsypmqaofx Adterk Price ex-location Transport available at extra cost!

Condition: reconditioned (used), Year of construction: 2023, machine/vehicle number: GM010.0396, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, table length: 840 mm, Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Lodpjxc Uq Hofx Adtsrk Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm Lrodpfxeuh R R Es Adtek - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: new, Year of construction: 2023, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 204 mm, height adjustment type: electric, table height: 910 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 550 mm, slide length: 3,200 mm, Equipment: motor brake, rotational speed infinitely variable, Altendorf F45 EvoDrive Year of manufacture 2023, new machine - Template holder on the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - Motor 5.5 kW (7.5 HP) VARIO (infinitely variable speed control) - Preparation for 2-axis scoring saw - Table top extension 840 mm - Double roller carriage length 3200 mm - Angle miter stop - CNC parallel stop 1300 mm - Front support roller Ledpfx Adsvw S Hfjtork

Condition: used, Year of construction: 2023, machine/vehicle number: Werksüberarbeitungsnummer: WÜA23051204239033, functionality: fully functional, power: 5 kW (6.80 HP), cutting width at rip fence: 1,300 mm, main saw diameter: 550 mm, section length (max.): 3,200 mm, table length: 840 mm, F45 Elmo Drive GM010.0407 Machine height: 910 mm Eye-level control panel Double-sided tilting Max. blade diameter: 550 mm Motor: 5.0 kW (6.8 HP) Vario 2-axis scoring unit with double-sided tilt LED lighting Table extension: 840 mm Double roller carriage: 3200 mm Mitre/fence stop DIGIT LD CNC parallel fence: 1300 mm Ledpfx Adoymdh Djtork Front support roller DUPLEX 1350 mm (2019)

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23-07-12-045, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, table height: 910 mm, cutting width at rip fence: 1,000 mm, The machine is in very good condition with minimal signs of use! The machine was used for processing aluminum. TECHNICAL DETAILS Maximum blade diameter: 550 mm Cutting width at CNC parallel fence: 1,000 mm MACHINE DETAILS Machine height: 910 mm Motor power: 7.5 kW Lrodpfx Aoytpxnsdtok EQUIPMENT Table extension: (length: 840 mm) Double roller carriage (length: 3,000 mm) 2 pneumatic quick clamps (application range: 0–90 mm) Eye-level control panel Template holder directly at the control unit Increased cutting height including saw blade tilting TIP-SERVO DRIVE CNC angle fence UNO 90 Additional cross slide incl. connection Front support roller Air cushion table Spray device Note: The machine comes from a business liquidation, has been professionally dismantled and placed in storage.

Condition: new, F 45 ProDrive:The new F 45 is a masterpiece of technology and design. The machine stand, which has been redesigned from the ground up, exceeds all previous values in terms of torsional rigidity and low eye-level control, with which you can call up the height and tiltof the saw blade plus, depending on the control package selected, the speed andother functions.3.5" color screen with separate keyboardAutom. Automatic dimensional correction at the parallel and angle stop when swivelling the saw unitSimple calibration of the axesMachine diagnostics, operating hours counter, USB interfaceCalling up the last dimension entry (back function)99 storable cutting programsGrooving: with automatic step-by-step positioning of therip fence400V / 50Hz - Europe , scale: scale in mmM44249machine height 910 mmM64099eye-level operationbasic equipmentThe control panel of the F 45 is mounted at eye level. This means that all axes can be conveniently controlled and all settings are in -hand operation of the swing-away deviceM64096max. blade diameter 450 mmBasic equipmentThe F 45 is equipped with a parallelogram guardwith two hoods for 90° and angle cuts.{They are infinitely adjustable in large pressure roller in the infeed automatically adjusts theguard to the workpiece maximum saw blade diameter is 450 mm. This achieves a saw blade projection of max. 154 mm.M511005.5 kW (7.5 hp)optionalone-sided swivel saw unit with 5.5 kW (7.5 hp) motor,manuallyadjustable to 3/4/5000 rpm. Swivel range: 0 - 46°AKE quick-change system for the main saw bladeThe motors have 20% more torque than standard electric motors with the samepower consumption.M24038Preparation for 2-axis scoring unitOptionScoring unit preparationfor retrofitting a scoring unitM41010Table top extension 840 mmBasic equipmentTable top extension 840 mmconsisting of a CDF panel with HPL coating on both sides. Itis particularly scratch and impact resistant.M34204Double castor trolley with trolley length 3200 mmOptionDouble castor trolley, trolley length 3200 mmThe Altendorf double castor trolley can be locked in any position. Thedouble castors, made of hardened steel, holdthe upper carriage in conjunction with the lower carriage absolutely precisely in thehard chrome-plated guide rods. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-hollow chamber system. The table surface is anodized.A hard chrome-plated round bar serves as a mount for the cross slide and as an interface for various accessories.M44404Angle mitre fenceOptionAngle mitre fence, cutting to length up to 3500 mmThis Altendorf-patented fence with integratedlength compensation facilitates the precise cutting of 90° angles andmitres in one function. In the front and rearstop position, the swivel angle is infinitely adjustable by 49° andis indicated by a measuring scale. Simply move the fence ruler to theselected angle dimension according to the scale and then set the desired lengthon the fence cut-to-length dimensions from approx. 1700 mm, theroller-supported and stable telescopic extension takes over the outer fence entire cross slide is supported by a precision-manufactured,prismatic support of the round bar of thedouble roller carriageIncluding: two single tilt stopsM44441CNC parallel fence 1000 mmOptionCNC parallel fence, cutting width 1000 mmThe CNC-controlled parallel fence can be controlled at a traversing speedo... Lsdpfxovzhdzs Adterk

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 with electric height and tilt adjustment for the main saw blade, dimension input via keyboard digital display for tilt angle and cutting height CE version Cutting length 3800 mm with center and end position locking Cutting width 1300 mm DIGIT-X with digital display and fine adjustment Saw blade diameter max. 550 mm Motor 5.5 kW VARIO Ledpfxoy E U D Uj Adterk AKE clamping system with automatic brake and digital speed display On/off switch on the double roller carriage Table extension 840 mm Angle/miter fence Availability: short notice Location: Flörsheim

Condition: good (used), Year of construction: 1987, functionality: fully functional, 45° tiltable, hydraulic lifting, lowering and swiveling, 1000 mm to the right of the blade, scoring unit, cutting height with scorer 130 mm, 400 mm Ø saw blade, cutting height without scorer 150 mm, 450 mm Ø saw blade, cutting length 3200 mm, upper extraction, 5.5 kW Price ex location Lodpfxoyaq Nbj Adtork Transport possible at extra cost!

Condition: good (used), Year of construction: 1978, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, cutting width (max.): 800 mm, saw blade bore: 30 mm, actuation type: manual, total length: 2,800 mm, Equipment: saw blade guard, Panel Saw / Table Saw / Circular Saw / Joiner's Saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1978 Sliding table length: 280 cm Ripping width/Parallel fence approx.: 80 cm Parallelogram safety guard with top-mounted extraction hood Extension table with crosscut fence Miter fence Motor power: 5.5 kW Condition: see pictures and please pay attention to the item description. Parts can also be picked up by the buyer. All dimensions are approximate. All information provided to the best of our knowledge, but without guarantee. Subject to prior sale. Articles can be picked up by the buyer or shipping can be arranged at the buyer's expense. The stated shipping costs are a guideline price; they may vary depending on distance and unloading possibilities. Please inquire. The offered item is subject to differential taxation. The indicated sales price is the gross final amount. An invoice with VAT shown separately will not be issued. You will receive an invoice according to §25 UStG. Warranty basis: Due to wear and tear on used parts, the items are fundamentally sold as defective – for spare parts only and only to commercial buyers. By placing a bid, the buyer accepts this as the basis of the sales contract. If the offered item is a used article, warranty is 12 months when the buyer is a consumer in terms of §13 BGB. If the buyer is a business customer in terms of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months for consumers according to §13 BGB. For business customers (§14 BGB), the warranty is 12 months. Lrodpfxey Aht Ds Adtok Notice regarding the online dispute resolution (ODR) platform.

Year of construction: 1990, condition: ready for operation (used), Saw blade diameter: 450mm, Cutting height: 150mm, Bore: 30mm, Swivel: 45°, Cutting width: 1000mm, Machine dimensions X/Y/Z: approx. 3300mm/2000mm/1600mm, Weight: approx. 1200kg. An on-site inspection is possible. Ljdpfx Aoynlt Redtsrk

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, Power rating: 380V 5.5kW Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Lrodpjv Uqa Eefx Adtek Parallelogram guard with narrow cover Cross table with stop Rip stop Scoring unit WITHOUT miter stop

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Lrsdpfx Adswrb U Tjtsk

Condition: good (used), Year of construction: 1990, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, table length: 1,400 mm, Types:F 45 ,Machine nr:90-8-86 Ljdpfxotxh Nis Adtsrk

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Lrodpfx Adowrfmaotsk Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Lodew Ix Aljpfx Adtjrk

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Location: Nattheim Lodpfxeyudidj Adtsrk

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg technical specification under subject Lsdpfxoipv Rle Adtork

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, cutting length (max.): 2,900 mm, Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Lrsdpfx Ajwynhpjdtok MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: reconditioned (used), Year of construction: 2022, machine/vehicle number: GM010.0310, functionality: fully functional, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,300 mm, Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Lrodpfew I Rtcex Adtok Blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Extendable cross-slide table widening Display DIGIT L