Used Arboga Um 3508 for sale (2,990)

Condition: ready for operation (used), ARBOGA UM 3508 / Drilling and milling machine with Heidenhain digital display -Drilling capacity in steel: 35 mm -Thread cutting: M 24 -Travel ranges X/Y/Z: 450x250x500 mm -Table dimensions: 650x270 mm -Cross slide table -Automatic feeds -Heidenhain digital display -Speed range / gear: 70-2160 RPM -Automatic feed -Overhang: 320 mm -Drilling depth: approx. 170 mm -Drilling/milling head: swiveling -Drilling depth stop -Drive power: 1.5 kW -Control panel -Indexing head -Machine feet -Documentation -Dimensions: L x W x H: 1.2 x 1.1 x 1.9 meters / Weight: approx. 800 kg Errors and omissions excepted. Nledpfx Ajzlg I Njkcjd

Condition: ready for operation (used), Brinkmann TA400/440+001 submersible pump, serial number: 1106017354-35087001, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nledezirpgopfx Akcod

Condition: used, Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm Nodpfx Akedyb Htjcsld -Weight: 1026 kg

Condition: good (used), Pressure vessel, pressure tank, pressure vessel, -Manufacturer: UM Alloy Products, stainless steel compressed air tank -Type: 316L MAWP 9 BAR -Contents: approx. 5 liters -Permissible operating overpressure: 9 bar -Dimensions: Ø 240 x 300 mm Nlodpein Hq Esfx Akcsd -Weight: 5.3 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Very well-maintained plate shear from Arboga. Type: MSS 2000-30S Nedpoza U Inofx Akcjld Capacity: 2025 x 3 mm Adjustable back gauge Return to sender Rear safety guard

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,775 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, total length: 1,000 mm, total height: 1,700 mm, total width: 750 mm, table length: 580 mm, drilling depth: 130 mm, Arboga A2508U Milling Machine. Milling & drilling possible. 3-phase 380 Volt, 2-speed motor runs perfectly! Geared head with 8 spindle speeds. Spindle RPM adjustable from 100 up to 2775. MT3 spindle taper. Tool ejector. Röhm Supra 1-13mm drill chuck included. Röhm machine vice included. Drilling depth adjustable. Max drilling depth: 130mm Head angle adjustable. Head height adjustable. Cross table size: 580x250mm Made in Sweden. Overall dimensions: 100x75x170cm Weight: 270KG Nedoy D Ugtspfx Akcold Contact us for shipping options! € 3,500.00 EX VAT!

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Nodpfx Aoxnvrvokcsld Spindle RPM adjustable from 100 up to 2900. Geared head. 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! €2,800.00 EX VAT!

Year of construction: 1970, condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm spindle taper: 5 MK arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm engine: 380 V, 2,2/3,7 kW space needed: 700 x 1200 x 2700 mm weight: 1240 kg Nodpfxey R Ths Akcold

Condition: used, bore capacity in steel (diameter) 25 mm throat 220 mm bore stroke 110 mm taper MK 3 MK table-size 350 rund mm turning speeds 100 - 2080 U/min connected load frequency 400 V total power requirement 0,9 KW Nljdpfxoyfwy Rj Akced weight of the machine ca. 0,2 t dimensions 0,8 x 0,6 x 1,9 m

Condition: new, bore capacity in steel (diameter) 40 mm bore stroke 190 mm turning speeds 50-1800 U/min Short spindle MK 4 Table dimensions 500x400 mm Nsdoyv Nr Uspfx Akceld total power requirement 2,2 kW weight of the machine ca. 330 kg dimensions of the machine ca. 670 x 500 x 2120 mm

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg Nlsdpfx Akexu U Suscod - Machine vice

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm Nsdpfx Aeyf Ehijkceld - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Year of construction: 1996, condition: good (used), machine/vehicle number: 337978, Technical specifications: - Drilling capacity in steel ST 60: 25 mm - Drill spindle taper: MK 3 - 8 drill spindle speeds: 100 - 2700 rpm - Drill spindle stroke: 130 mm - 4 feed rates: 0.1 - 0.3 m/rev Nodpfx Ajfmh R Uekcold - Overhang: 270 mm - Column diameter: 115 mm - Drilling unit + table, height-adjustable - with hand crank via rack and pinion - Table dimensions: 350 mm - Drive: 400 V / 0.8 / 1.1 kW - Space requirement: approx. W 800 x H 1850 x D 900 mm - Weight: approx. 250 kg

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, used, in good condition, 100% functional, delivery as per photos, professionally fully overhauled and tested with 3 months' warranty, 100% functional, delivery as per photos. Nedpfox Etdgjx Akcsld

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, professionally fully overhauled and tested with 3-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not show any mechanical damage such as fractures, as these cannot be repaired. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 114 ID 325 005-12 SN15160246 under the exchange service. The unit is professionally fully overhauled and tested, with a 3-month warranty and guaranteed full functionality. Scope of delivery according to photos. For both repair and exchange services, your returned part must be free from mechanical damage such as breakages, as these are irreparable. If such damage is found, a surcharge of €1,000 incl. VAT will be invoiced. Nlodpfx Aox Etdmokcod

Condition: good (used), Year of construction: 2019, operating hours: 3,732 h, load capacity: 1,600 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, empty load weight: 3,285 kg, mileage: 3,732 km, Triple-mast reach truck, for use in cold storage facilities. Make: Atlet Year of manufacture: 2019 Only 3,732 operating hours Capacity: 1,600 kg Lifting height: 5,400 mm Mast lowered height: 2,350 mm FREE LIFT, SIDE SHIFT CABIN with HEATING Battery: 2019 Includes charger Nsdpfxjzdpzve Akcsld Watch the video on YouTube.

Condition: used, Year of construction: 1970, Schlitzmaschine / Slot machine Krause-Y-32-UM-2-69Schlitztiefe / slot depth max. 32cm Normal Schlitzbreite / Normal slot width 3mm Hub des Druckstückes / stroke of the pressure piece ca. 30mm Stanzhübe / punch strokes per minute ca. 84 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Nedpfoiiduaex Akcjld

Condition: ready for operation (used), Heidenhain UM 113D ID 730435-01. The costs include only the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation detailing the actual repair costs. Once you approve the repair, the analysis costs will be waived. Your component will be fully overhauled during the repair process and comes with a 3-month warranty from us. Nljdpfxey Nra Ue Akcsd

Condition: ready for operation (used), Heidenhain UM 113D ID 730435-51 The costs only include the repair analysis of your component, which you can send to us. After the inspection of your component, you will receive a quotation detailing the actual repair costs. Once you approve the repair, the analysis costs will be waived. As part of the repair process, your component will undergo a complete overhaul and will be supplied with a 3-month warranty from us. Nodoy Nrbfjpfx Akcold

Condition: ready for operation (used), Heidenhain UM 114 ID 325005-11 The listed costs cover only the repair analysis of your component, which you may send to us. Once your component has been inspected, you will receive a quotation including the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Nedpfx Akoy Nrbrecjld

Condition: ready for operation (used), Heidenhain UM 114 ID 336951-ZY. The costs cover only the repair analysis of your component, which you can send to us. After evaluation of your component, you will receive a quotation with the actual repair costs. If you approve the repair, the costs for the analysis will be waived. Your component will be fully overhauled during the repair and is covered by our 3-month warranty. Nedpsy Nrb Eefx Akcjld

Condition: ready for operation (used), Heidenhain UM 115D ID 387852-01. The costs only include the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. As part of the repair, your component will be completely overhauled and comes with a 3-month warranty from us. Nedpfx Ajy Nrcpskcold

Condition: ready for operation (used), Heidenhain UM 121B ID 336949-02. The costs only include the repair analysis of your component, which you can send to us. After evaluating your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair, your component will be completely overhauled and comes with a 3-month warranty from us. Nsdpfsy Nrfqex Akceld

Condition: ready for operation (used), Heidenhain UM 121BD ID 667942-01 The costs listed only cover the repair analysis of your component, which you may send to us. After our evaluation, you will receive a detailed quotation outlining the actual repair costs. If you approve the repair, the analysis costs will be credited towards the repair. As part of the repair process, your component will be completely overhauled and comes with a 3-month warranty from us. Njdpfxsy Nrf Ro Akcsld

Condition: ready for operation (used), Heidenhain UM 121D ID 730973. The costs listed include only the repair analysis of your component, which you can send to us. After inspection, you will receive a quotation with the actual repair costs. Upon your approval for the repair, the analysis fee will be waived. Your component will be fully overhauled as part of the repair and comes with a 3-month warranty from us. Nljdpfx Aksy Nrgnoced