Used Automatic Vertical Copy Lathe for sale (30,768)

Condition: ready for operation (used), functionality: fully functional, AUTOMATIC VERTICAL COPY LATHE model GENINI GS 120 Hedpfoyl Iufjx Am Tor second hand 3 spindles + copy automatic movement of carriage feeding speed of carriage is regulable quick reverse of carriage automatic movement of tools unit pneumatic press distance between spindles mm.160 max. length to work 1200 tools motor power Hp 4 volt. 380/50

Condition: used, CATALOGUE NUMBER 7650 Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm Hedpfx Amezh Ivte Tjr - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Hsdpsib D H Rofx Am Ter Total weight with pallet 3000 kg Good condition

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) Hsdsxz Tfaepfx Am Tjr - Speed regulation on slide. - Works great

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Hsdpfjzlqdzjx Am Tor Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Parts conveyor belt

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Z-axis: 300 mm, chuck outer diameter: 250 mm, spindle bore: 79 mm, number of slots in tool magazine: 12, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hjdszpxf Ujpfx Am Tjr Travel in X-axis: 800 mm Travel in Z-axis: 300 mm Chuck diameter: 250 mm Spindle head: 170 h5 Spindle diameter at the front bearing: 120 mm Spindle bore: 79 mm Number of tool stations: 12 EQUIPMENT C-axis

Condition: ready for operation (used), Year of construction: 2011, operating hours: 8,733 h, functionality: fully functional, spindle bore: 26 mm, rotational speed (max.): 7,200 rpm, number of axes: 5, number of tool turrets: 2, Long-turn lathe with an extended accessory package and spare parts! Counter-spindle: Completely re-conditioned 05/2026 TECHNICAL DETAILS CNC control: GE Fanuc Series 18i-TB Number of axes: 5 Axes: X1, X2, Y, Z, C Spindle Spindle speed: 50–7,200 rpm Spindle bore: 26 mm Spindle stroke: 160 mm TURRET Number of turrets: 2 Positions per turret: 6 MACHINE DETAILS Motor power: 3.7 kW Weight: 2,600 kg Spindle hours: 8,733 h Control on: 10,642 h Feed time: 3,257 h Part counter: 478,135 EQUIPMENT - Bar feeder FMB Turbo 3-36, year of manufacture 2011 - Chip conveyor - Package of fixed and powered tool holders - Package of collets and guide bushings - Discharge system for long parts including reduction sleeves - Double-cone clamping system on the main spindle, system JBS - Breakage detection for cut-off tools, Detector France - Ejection control, Detector France - JBS guide bushing, not yet installed - Tool presetting device with optics for external tool setup - Replacement worms for chip conveyor Hedeznyrtopfx Am Tor - Mounting device for adjusting the cylinder of the working hood - Various spare parts

Condition: used, Craven Double-Column Vertical Boring & Turning Mill (VTL) Table Diameter: 9 ft / 2,743 mm Maximum Swing: 9 ft 6 in / 2,895 mm Hedpfxezq Dc Us Am Tsr Maximum Machining Height: 6 ft 6 in / 2,000 mm (Table top to underside of crossrail) Maximum Workpiece Weight: Up to 15,000 kg (Approx. 15 Tons) Table Speed Range: 1 to 50 RPM Ram Travel (Vertical Z-Axis): Up to 1,000 mm

Condition: used, Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Hsdpfx Amozkkcus Tsr Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Main motor 40hp Newall 2 Axis Digital Read Out

Condition: excellent (used), Webster Bennett 48" Elevating Rail Vertical Turning Lathe Hsdozh Ndrepfx Am Tor With Copying attachment 48" diameter table Can be shown demonstrating at our premises if you wish to view.

Condition: excellent (used), Webster & Bennett 72" Elevating Rail Vertical Turning Lathe with copying attachment 72" diameter table Hodpfjzh Ndfex Am Tjr Can be shown demonstrating at our premises if required.

Condition: used, Year of construction: 1970, Diameter of the table 3000 mm turning diameter Max. 5500 mm column travel 1000 mm table turning speeds 82 U/min table load max. 25 t turning height 2000 mm weight of the machine ca. 75 t Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Hedpfx Amozhn Txs Tsr Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear using fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed levels adjustable via V-belt, and within each level, operation can be continuously adjusted using a frequency inverter. Speed level 1: 200 - 2000 RPM Speed level 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest Four-jaw chuck 125mm Copy tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition from a small carpentry shop. Hodpfxozfwm No Am Ter The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. Hjdpfx Amszd Uv Es Tjr 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: used, Year of construction: 1988, spindle passage ca. 20-25 mm turning length 70 mm mm cross cut 22 mm voltage 380 V Hedpfx Aszn Aihom Tjr weight 1000 kg dimensions of the machine ca. 6,0 × 2,0 × 2,0 m m 10 Stück

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (year of manufacture 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 1600 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Technical features: Cutting area: approximately 5300 mm in length 1600 mm in height (model 6216) Control: fully electronic positioning and touchscreen operation for serial cuts. Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. Hodpfx Aozpbcvom Ter Location: will arrive in week 33 at warehouse 54634 Bitburg.

Condition: used, Year of construction: 2015, Control SYSTEM TX 8i-p spindle headstock ? bar passage 20 mm z-travel 205/80 mm max. turning speeds 10.000 min/-1 number of tool places 8 Pos. max. turning speeds 12.000 min/-1 x-travel 120 mm y-travel -40 / +25 mm z-travel 250 mm number of tool places 8 Pos. max. turning speeds 12.000 min/-1 x-travel 120 mm y-travel -20 / +40 mm z-travel 250 mm spindle passage 18 mm max. turning speeds 10.000 min/-1 x-travel 100 mm z-travel 262 mm rated capacity 35 kW connected load 24 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and Hedpfx Amszndtno Tjr prior sale.

Condition: used, Year of construction: 2007, machine/vehicle number: 511966, Turning length: approx. 400 mm, bar passage: 60 mm, counter spindle, 2 x 14-position tool turret, cross slide X/Y/Z, B-axis slide control INDEX C 200-4 D, workpiece removal, conveyor belt, chip conveyor, manufacturer: KNOLL, bar feeder MBL 65/3700, the machine requires repair; repair costs according to the cost estimate: approx. €1,880.00 net; drilling emulsion/lubricants must be professionally extracted and disposed of by the customer. Hjdpfxjzqy U Hs Am Ter

Condition: good (used), Year of construction: 1990, FOR SALE Hjdpfjzlrifjx Am Ter BERTHIER BMF 160 VERTICAL TURNING LATHE Dimensions and capacities: - Table diameter: approx. 1750 - Maximum turning diameter: approx. 1800 – 1880 mm - Maximum machining height: approx. 1600 mm and 600 mm stroke - Maximum workpiece weight: up to approx. 15,000 kg (15 tons) Performance and drive: - Table rotation speed: up to approx. 250 rpm - Spindle motor power: from 37 kW to 55 kW depending on the version - NUM 1060 type CNC controls

Condition: good (used), Year of construction: 1980, Please find below the technical specifications for the RAFAMET vertical lathe, Type KCF 250: Hodezlrg Dopfx Am Tor General information: - Year: 1975 - Overhaul/Retrofit: Approximately 2010 - Table diameter: 2500 mm CNC NUM 1060 Technical capabilities (indicative data for this machine segment): - Table diameter: 2500 - Maximum external machining diameter: 2700 - Maximum turning diameter: ~2800 mm - Maximum workpiece height: ~2200 mm - Table load capacity: Up to ~15,000 kg (15 tons)

Condition: good (used), Year of construction: 2004, operating hours: 37,500 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, EQUIPMENT: FANUC 18i control system Back-side machining Synchronous spindle Hjdpezp Ni Djfx Am Tor Powered tools C-axis High-pressure pump Chip conveyor Mist extraction system Fire extinguishing system Part conveyor belt Bar feeder magazine FMB TURBO 3-26

Condition: used, Year of construction: 2011, machine/vehicle number: 268S24, Max. bar diameter: 32 mm, max. machining length: 250 mm, with FANUC Series 160i-TB control, conveyor belt, chip conveyor, left-hand bar loader FMB Turbo 3-36, serial number: 51-261463/876667, year of manufacture: 2011, filter and cooling unit, high-pressure system COMBILOOP, without tools. Hsdszqy T Nopfx Am Tjr

Condition: used, Year of construction: 2012, machine/vehicle number: 282S25, Max. bar diameter: 32 mm, max. machining length: 250 mm, control system: FANUC Series 160i-TB, conveyor belt: ERUTE, left-hand bar loading magazine: FMB Turbo 3-36, serial number: 52-261754/966566, filter unit, high-pressure system: MÜLLER combiloop CL3, with chip conveyor, without tools. Hjdpfx Amezqy Tij Ter

Condition: used, Year of construction: 2013, machine/vehicle number: 289S26, Max. bar diameter: 32 mm, max. machining length: 250 mm, control system: FANUC Series 160i-TB, conveyor belt: ERUTE, left-hand bar loader magazine: FMB Turbo 3-36, serial number: 53-262361 / 1117340, filter unit, high-pressure system: MÜLLER combiloop CL3G, serial number: CL3459, with chip conveyor, extinguishing system, without tools. Hsdpezqy Tcsfx Am Ter

Condition: used, Year of construction: 2016, machine/vehicle number: V842A0096, Machine with SIEMENS Sinumerik 840 D control, serial number V842A0096, year of manufacture 2016. Max. bar diameter 42 mm, max. feed length 180 mm. 8 independently driven spindles, max. spindle speed 4,500 rpm, power per spindle motor 11 kW (total power 88 kW), max. spindle torque 66 Nm, drum indexing time per spindle position 1 s. Max. 8 longitudinal slides, max. 7 cross slides, 1 facing slide. Machine dimensions without peripherals approx. 7,100 x 2,400 x 3,300 mm, control cabinet dimensions approx. 5,000 x 600 x 2,300 mm. Machine weight approx. 18,000 kg, control cabinet weight approx. 2,500 kg. Bar feeder IEMCA PRA 52/P/33, year of manufacture 2018, serial number 021813EA02. With chip conveyor and filter system ZPS 925A1851C1F, year of manufacture 2016, serial number 0013. Without tools. Hjdszqy Slopfx Am Tor