Used Automation Service Limited Asl2010 for sale (31,701)

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Lsdpfx Ansxvxqdoxjag Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: used, functionality: fully functional, overall weight: 1,000 kg, A machine designed to automate the gluing of display units, display stands, crowners and pall boxes. Its strength lies in its versatility. Easy to programme, it will fit into any gluing department seamlessly, causing minimal disruption to the department. Ljdpfjr Hqgxox Anxoag

Year of construction: 2011, condition: used, Packaging Automation PA182 tray sealer 1.2802E+11 Stainless tray sealer, two station rotary table, up to 40 packs per min, mobile, current tooling 210mm x 165mm tray Lededbqtqopfx Anxoag

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Ljdpfxszd Rmgj Anxoag Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Ledpfeuzn Nnex Anxoag Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as shown in the photo, used, display film damaged (see photo 2), otherwise normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lodpfxsi D Uh Is Anxeag

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Marden Edwards Limited semi-automatic shrink wrapper and heat tunnel. Supplied with new belt. Lsdpfezwxv Nsx Anxjag Manufacturer: Marden Edwards Limited Shrink wrapper: Model - ES 60. Serial number - W3710. Heat tunnel: Model - M25-40T. Serial number - W3708. Date of manufacture - 2012. Tunnel aperture dimensions - 515mm wide x 410mm high. Film roller - 595mm long. Sealing bar - 640mm long. Cutting knife - 620mm long. Height between sealing bar and rollers at maximum height - 345mm high. Electrical requirements - 230 V / 50 hz / 1 phase.

Year of construction: 2020, condition: used, Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power. Lajdpfsz D Hzqsx Anxeg

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 Ledezyzzyjpfx Anxjag The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, workpiece weight (max.): 50 kg, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, type of cooling: water, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. Ljdpfx Anjzzwx Djxeag This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, positioning speed: 60 m/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 50 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. Lasdpfx Aezzkrwenxeg The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion. Lasdpfx Aoxf Urpjnxog

Year of construction: 2013, condition: good (used), For Sale: Well-maintained in-line system for use behind a Multivac packaging machine. This in-line system ensures a transition from 4 tracks to 1 track and subsequently passes through a metal detector with an ejector. Brand: Automation Systems BV Type: Automation Systems BV in-line robot with a Mettler Toledo metal detector with ejector Robot type: BCE001 Year of manufacture: 2013, voltage: 400 V, 16 A It is possible to inspect this machine on-site. - Transport can be arranged. - Export documents will be provided if necessary. - Proper loading is included. Lsdpfxezt Ib Tj Anxsag If you have any questions or comments, please do not hesitate to contact us.

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills Lasdpfx Anezz Sugoxsg With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: like new (used), Year of construction: 2021, We are offering this like-new Beckhoff Automation GmbH & Co. KG C6525-1018-0050 controller, manufactured in 2021. Manufacturer: Beckhoff Automation GmbH & Co. KG Model: C6525-1018-0050 Year of manufacture: 2021 Condition: like new Lsdez Dg Drspfx Anxeag Category ID: 102 Type ID: 994 Type: Controller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2006, condition: used, An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement. Ledpfx Anjzy Rv Hjxsag

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) Ledpfxofbl E Se Anxeag The machine is DISMANTLED. Has been repainted recently.

Condition: used, Year of construction: 2018, machine/vehicle number: SCIAC44, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Lasdpsvhcplsfx Anxeg Container Capacity The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Bottle Diameter and Height Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines. Given that this machine has seen minimal prior usage, it adds to its reliability. With a speed of 900 BPH, the LINE6 model certainly meets the needs of high-production plants. Conclusion of the Rinsing Machine Aesse Service In conclusion, the Used Rinsing Machine Aesse Service LINE6 year 2018 offers an efficient and versatile solution for handling glass bottles of various sizes and capacities. Its compact design and high-quality construction, for in...

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Lasdpfx Anjx Ap I Hoxjg

Condition: used, Technical details: x-travel: 3000 mm y-travel: 1500 mm cutting thickness max.: 32 mm table-size: 3000x1500 mm burner heads: 1 Stück Swift-Cut is part of ESAB Welding & Cutting GmbH. The machine consists of several components: Plasma cutting table: Swift-Cut Plasma power source: Hypertherm MAXPRO200 / 400 V / 3-phase / 50 Hz / Max. output current: 200 A / Input current according to the nameplate: max. 64 A / Mild steel cutting capacity: 32 mm production cutting / 75 mm max. severance cut Extraction system: Keller VARIO-2-KM12-BE30 / Year of manufacture: 2019 Ledpfx Aezu Nhdonxoag *

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Lasdpfju Ailgox Anxjg Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: used, Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Manufacturer: Automation Assistant Oy Type: LG2750 Date of manufacture: 07/01 Machine type: Linear Guided Free Fall Tester For sale is a used Automation Assistant Oy LG2750 Linear Guided Free Fall Tester. This linear guided free fall test stand was designed for reproducible drop and impact tests and is suitable for quality assurance, research, development, and industrial testing applications. Operating manual and electrical documentation are available. Technical data: Lajdszn Uqdepfx Anxeg Manufacturer: Automation Assistant Oy Type: LG2750 Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: concrete garden paving stone 300 × 300 × 50 mm Frame: aluminum profile Protective panels: polycarbonate / XT-acrylic Other materials: aluminum, steel and POM Dimensions: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Weight of test tower: approx. 155 kg Weight of impact table: approx. 55 kg Total weight: approx. 210 kg Equipment: Touchscreen control panel Closed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Transport data: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Transport weight: approx. 210 kg Condition: Used The unit was last used in an industrial setting. Optical condition as shown in the pictures. Scope of supply: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 430 mm Bowl internal height: approx. 100 mm Sorting track width: approx. 12 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Power connection: 230 volts, 50 Hz - Control unit REO Type Reovib RS6 439-459 for adjustable vibration speed Space required: Ø x H: 430 x 390 mm Weight: 52 kg Good condition A spiral conveyor always consists of two essential components. Lajdpfxozrzygs Anxeg 1) Sorting bowl, in which the parts are aligned. 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations, thereby setting the parts in motion.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Ljdpfxjy N Dvbj Anxoag Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Lasdpem Sg Hcefx Anxeg