Used Automation System for sale (50,905)

Year of construction: 2013, condition: good (used), For Sale: Well-maintained in-line system for use behind a Multivac packaging machine. This in-line system ensures a transition from 4 tracks to 1 track and subsequently passes through a metal detector with an ejector. Brand: Automation Systems BV Type: Automation Systems BV in-line robot with a Mettler Toledo metal detector with ejector Robot type: BCE001 Year of manufacture: 2013, voltage: 400 V, 16 A It is possible to inspect this machine on-site. - Transport can be arranged. Ndedpfjzt Ib Tsx Ah Soc - Export documents will be provided if necessary. - Proper loading is included. If you have any questions or comments, please do not hesitate to contact us.

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 Nodpfx Ahszd Rmgj Sjdc System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, This listing is for a Siemens Immulite 1000 Automated Immunoassay System The unit is in full working condition and ready for immediate use The Siemens Immulite 1000 is a compact benchtop automated immunoassay analyser designed for routine and specialised testing. It provides random-access operation, enzyme-amplified chemiluminescence technology and throughput of up to 120 tests per hour. It supports serum and plasma samples and offers a broad assay menu. Nedpfx Asxzhmfeh Sedc

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Ndsdpfxszhv Rlj Ah Ssc Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Year of construction: 2006, condition: excellent (used), Transport and automation system for motor housings with control system Technical parameters of motor housing Inner diameter: 66 mm, 70 mm, 74.2 mm Wall thickness: 2 mm Length: 87.8 mm – 135 mm Material: Steel, painted Technical parameters of grinding machine - Two-belt grinding machine, type M2-120, manufacturer Weber - Includes continuous prism conveyor with adjustable speed via frequency converter System output: max. 52 pieces per minute Functional description: The motor housings are manually removed from the grid box by one person and placed on a buffer table in a defined position. A row pusher moves the foremost row onto a permanent magnetic articulated belt conveyor. Ndodpfx Ahszww Ece Sec The motor housings are automatically transported and transferred to a permanent magnetic combination conveyor. After a 90° deflection, the housings are buffered in a roller track. One housing is released at a time and fed to a prism conveyor. The combination conveyor is axially adjustable, so that a centric feed to the prisms is ensured depending on the housing length. After the grinding process, the motor housings are transferred to another permanent magnetic combination conveyor. After a 90° deflection, the housings are brought into a stationary position and guided onto a permanent magnetic articulated belt conveyor. With stamping number control system Syscona For secure and reliable detection of stamping numbers in metal tubes. Detection station with high-resolution CCD black and white camera with scan sensor. With control system Syscona For detection of bumps in tubes according to a pattern. HighVision HV video camera system Defective motor housings are identified and transmitted accordingly to the rejection device. A swivel cylinder directs the housings onto a parallel articulated belt conveyor, which transfers them to a buffer table. DISMANTLING by customer!

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 6 V, NEW AUTOMATIC SACKING MACHINE (P SYSTEM Automation) FOR PELLETS – COMPLETE WITH FEEDING SCREW AND CONTROL PANEL For sale is a new automatic sacking machine (exhibition model), designed for packaging pellets and other granular materials into bags formed directly from plastic film on a roll. This solution is suitable for both integration into existing pellet production plants and for new packaging lines. Composition of the supply: • New automatic sacking machine with product weighing and dosing system. • Inclined feeding screw. • Screw designed for connection to a suction and dust extraction system. • Control unit. • Conveyor belt for discharging packaged bags. Operation: Nodez Sc Acopfx Ah Sodc The packaging cycle is fully automatic and includes: • Bag formation from plastic film on a roll. • Weight-based dosing of the pellets. • Bag filling. • Vertical and horizontal heat sealing. • Automatic cutting. • Discharge of the finished bag onto the discharge conveyor. The machine is designed to be operated by a single operator. Main technical features: • Indicative productivity: up to 200 bags/hour. • Maximum bag weight: 25 kg. • Bag width: 350–500 mm. • Bag length: 500–700 mm. • Packaging material: plastic film on a roll. • Film thickness: 60–120 microns. • Electrical supply: 400 V – 50 Hz. • Installed power of the sacking machine: 6 kW. • Control system: touch screen panel. Integration options: Upon request, the supply can be completed with: • KIT FOR CREATING FOLDED CORNERS ON THE BAGS • Pellet storage hopper of various capacities. • Suction and dust extraction system. • Automatic palletizer. • Pallet wrapper. Supply conditions: New machine, not used or reconditioned. Under manufacturer's warranty. Supply terms: Ex Works – Cremona, Italy.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. Nsdszlh Auopfx Ah Ssdc This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Nodjydd Acopfx Ah Sodc

Condition: excellent (used), functionality: fully functional, operating hours: 100 h, KNAPP’s OSR Shuttle™ Evo automated shuttle system, designed for high-performance storage, order picking, and logistics flow management. This modular system enables flexible, scalable, and energy-efficient operation of modern warehouses. Key technical features: Type: AS/RS (Automated Storage and Retrieval System) Capacity: up to 50 kg per bin Installation height: up to 30 m Throughput: up to 1,000 dual cycles/hour Ndsdpfsxtawtox Ah Ssc Operation: 1D or 2D, depending on the configuration Components included (depending on configuration): OSR Shuttle™ shuttles High-density shelving High-speed vertical lifts Order picking stations Connection accessories (conveyors, power supply, cabling, etc.) Environment: suitable for refrigerated areas (down to -28 °C) Applications: e-commerce, distribution, industry, pharmaceuticals, electronics, etc. Compatible with “goods-to-person” workstations and automated conveyor systems Quantity: 20 Price: €4,590.00 (excl. VAT) per shuttle

Condition: used, Assembly machine / production line The device was previously used to assemble and press together upper and lower parts. Components include: - Kuka Scara KRC2sr robot, manufactured in 2010 - Pneumatic control system - Electrical control system with frequency inverter - 4 conveyor belts Description of robot type KR 5 scara R350: Working space volume KR 5 scara R550-Z320: 0.264 m3 Nodpsglp Uyjfx Ah Ssdc Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point of working space: intersection of axes 3 and 4 Weight approx. 20 kg Robot data sheet Control system data sheet You can find more new and used items in our shop! International shipping costs available upon request! Item condition: used

Condition: new, Automation cabinet, control system cabinet, switchgear cabinet, Siemens SPPA - T2000 Control system and cabinet design Siemens switchgear cabinet, SPPA - T2000 AS 620B R903, Siemens 8 MF cabinet SPPA FUM R standard cabinet 6DP2623-1GG10-0XX0-Z Switchgear cabinet, Siemens sppa-t2000 8 MF cabinet AS 620 B R903 6DP2623-1GG10-0XX0-Z B15+Y88 Y88=A5E03444617 B15: with cross-connection Component set for earthquake reinforcement, front and rear Double doors 2 x partition wall Transporting eyelets Cabinet indicator lamp Height × Width × Depth: 2200 × 900 × 400 mm Protection class IEC60529: IP20 Nodpfxotzbdko Ah Sjdc Protected against solid foreign objects (diameter ≥ 12 mm), no protection against water Central unit module carrier: 1 x reduced AP FUM-B-BGT: 3 x EU 903 module carrier with 2 x Profibus connection, IM616 and control system monitoring with 1 x Fum210 Sys 36 fuse slots Color: RAL 7032 switchgear cabinet, Siemens Module designation Fum210/6DP1210-8BC Teleperm XP Binary module Profibus connection interface module IM616 6DP1616-8BA More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the process is extremely gentle on the tooling. The pipes remain almost completely dry and free from major contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging are directly integrated). Thanks to two separate box output stations (rear-side airlocks with sliding doors), the system automatically switches to the second station when the first box is full. The removal of the finished KLT boxes takes place in parallel with the main processing time without stopping the machine. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest setup times in non-cutting separation Material-saving and free from contamination Chip-free Easy to maintain No coolant or lubricant required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimps) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feeding system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths by means of a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup operation: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panes Logistics / Output Integrated box unloading station 2 separate box output stations for rear-side removal via protected airlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of construction: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Ndodezw Ukcepfx Ah Ssc Condition: The system is in good optical and mechanical condition.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Fresenius Kabi Lovo Automated Cell Processing System Ndjdoq Avtgspfx Ah Ssc PN: 6R4900 Condition: Used in excellent condition. PROCESS FAST. MAXIMIZE CONTROL. Only Lovo delivers automated, functionally closed cell processing through spinning membrane filtration. Product Features: The Lovo Cell Processing System is a benchtop cell processor that automates labor-intensive tasks of washing and concentrating white blood cell products. Using spinning membrane technology, Lovo allows for non-pelletizing cell concentration and reduces the need for manual re-suspension. Additional Features: Processing volume range: 1 mL to 21 L Operator-defined processing parameters including levels of supernatant removal and final product volume. The LOVO system is for laboratory use only. Cells processed on this system are not intended for diagnostic purposes, for direct transfusion, or for use in the production of a therapeutic product(s) or vaccine(s) for clinical use, unless the user has obtained advanced regulatory clearance or approval from the appropriate regulatory agency. Cell types Fresh, cryo-preserved, and culture-expanded white blood cells, including, but not limited to, leukapheresis CD34+ cells, CAR T-cells, TILs, NK cells, and MSCs Volume range Source Up to 22 L Output* 50 mL – 50 L Wash-out range Up to 99.9999%* System components • 73 lb, 35.3” x 17.6” x 24.5” (W x D x H) benchtop instrument • Single-use processing kit with spinning membrane module We have two units in stock, both fully functional. Password need to be changed. Please check out our other listing as well.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 REF: MM6471 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. Nodezn Rciepfx Ah Sodc The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. Technical specification: ✅ Manufacturer - CERTUSS Dampfautomaten GmbH & Co. KG, Germany ✅ Model - Universal 600 TC FG/LPG. ✅ Serial number - 15716. ✅ Date of manufacture - 2021. ✅ Steam output - 600 kg/hour. ✅ Fuel - LPG (propane). ✅ Electrical supply - 3 x 415 V / 50 hz, 5.66 kVA, 16 A. ✅ Control - automatic, PLC. ✅ Run time - under 200 hours logged, according to the owner. Supplied with chemical dosing and blow-down vessel. Any further water treatment equipment is not confirmed. Located in Cullompton, Devon. Viewing by appointment. Buyer to remove.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, load capacity per storage section: 400 kg, Manufacturer: HÄNEL Model: Lean Lift Shelf dimensions: 3260/825mm Number of shelves: 25 Load capacity per shelf: 400 kg Rack height: 3.90m Year of manufacture: 2016 Operating hours (number of cycles): 22100 Maximum storage capacity: 40,000 kg Control system: MP 12N-S Hänel The rack is in excellent condition with minimal signs of wear. This machine is highly recommended. Ndedpey Dgkksfx Ah Sjc We can arrange transportation and installation after purchase.

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab STARlet M The unit is in full working condition and ready for immediate use. Software is included A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Nedpfxjy Ex Uqs Ah Sedc Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2015020890, For sale is a magnetic filter system with integrated cleaning system. Filter systems of this type are usually made individually to order from customers. In this system, there is an exhibition purpose, which only served to show, and was hardly in use. product benefits Installation possible into existing production lines Nsdpfx Ahecwghbj Sedc Separation of any ferrous metal contaminants Very corrosion resistant High wear resistance Compact design Low maintenance Technical details - 400 x 400 x 390 mm - Inlet 260x260mm - Inlet 260x260mm - 8 pcs magnetic filter rods

Year of construction: 2012, condition: used, machine/vehicle number: AT105, Used Diversey automatic CIP systemTechnical Specifications & Performance DataThis Clean-In-Place (CIP) system is designed to deliver reliable, repeatable sanitation for beverage production and industrial packaging processes. With three dedicated tanks and fully automatic operation, it streamlines cleaning cycles across process circuits, fillers, pasteurizers, and associated pipelines. The system’s electric heating ensures precise temperature control for effective caustic and rinse phases, supporting consistent hygiene standards on second hand and used bottling line installations.System type: Clean-In-Place (CIP)Year of manufacture: 2012Automation level: Fully automaticHeating method: Electrically heatedPower rating: 15 kWElectrical requirements: 380V / 50 HzNo. of tanks: 3Tank volumes: 2 x 1.0 m³ and 1 x 0.5 m³Total tank capacity: 2.5 m³Application: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe fully automatic control architecture enables consistent, programmable cleaning sequences with minimal operator intervention. Electric heating supports stable thermal profiles during detergent and rinse steps, improving repeatability and cleaning efficiency. The system layout is compatible with standard PLC/HMI integration practices used in beverage production facilities, facilitating recipe management, cycle timing, and data logging when connected to a plant control network.Production Line Integration CapabilitiesEngineered for seamless integration, this CIP system connects to fillers, piping manifolds, heat exchangers, tanks, and ancillary process equipment. It supports inline or centralized cleaning concepts and can be deployed as a standalone sanitation module serving multiple circuits via automated valve routing. Format and product changeovers are simplified by recipe-driven cycles, making it suitable for facilities handling diverse SKUs within a used bottling line or broader packaging machinery environment.Machine Condition & Maintenance HistoryWith fully automatic operation and electric heating, this CIP system is configured for dependable day-to-day sanitation. Routine preventive maintenance focuses on pump seals, valves, gaskets, temperature probes, and conductivity/flow instrumentation typically used in CIP applications. The three-tank arrangement supports efficient scheduling of cleaning cycles and straightforward upkeep of wetted parts to maintain long-term performance and hygiene.Operational Performance & VersatilityThe multi-tank configuration supports core CIP steps such as pre-rinse, detergent wash, and final rinse, enabling effective removal of residues and biofilms commonly encountered in beverage production. Electrically heated operation enhances the dissolution and action of cleaning agents, helping achieve target sanitation outcomes across a wide range of processing equipment. The system’s automation improves consistency between cycles, reduces manual handling, and supports quality assurance requirements in second hand and used bot... Nodpfx Ahj Adyz Rj Sedc

Condition: used, Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: - Spindles: 5 - Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm - Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer - Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer - Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer - Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm - Working width: 175 mm - Working height: 80 mm - Feed: 15 kW / 100 m/min Ndedpsz Hy H Ssfx Ah Soc - Control: CNC memory system - Max. workpiece length: ~ 6,000 mm

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Ndjdpfx Ajwb E Sboh Soc

Year of construction: 2006, condition: ready for operation (used), Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19450, payload: 2x50kg per compartment, max. loading unit dimensions X/Y/Z: 600mm/400mm/320mm, travel speed: 200m/min, lifting speed: 120m/min, retrieval speed: 100m/min. On-site inspection is possible. Available from approx. Q4 2024. Ndsdpstvgqnofx Ah Ssc

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Ndjdpfx Ahexvxqdo Ssc Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly Nodpfx Aozhub Ash Sodc - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: excellent (used), Acemal waffle production line. Comprising divider, proofer, hot plate oven and cooling spiral. Bought new in 2015 and hardly used. From 2,000 Liège waffles per hour. Ndedpfxjxnqtzj Ah Sec

Year of construction: 2024, condition: new, functionality: fully functional, Model: MAS-30-2 Njdpfxocubgps Ah Sodc Working dimensions (W x H x D): 1200 x 1800 x 300 Drive: Electric Rated power: 21 kW Rated voltage: 380 V Frequency: 50-60 Hz Number of nozzles: 250 pcs Pump: 1200 L/min Mixing of cleaning agents not possible – separate nozzles Nozzle type: Chemically neutral Operating temperature: 20 - 60°C Number of cleaning cycles: 2 Filling volume: ~1200 L Filtration: Yes Manufacturer's warranty: 12 months