Used Ayen Knothole Boring Machine for sale (64,736)

Condition: used, used, top condition, hardly run manufactured by Ayen type ED 08-3 motor 0.6 kW number of spindles 3 piece wall machine folding hand operation stand range ca. 500 mm drill chuck Konus MK 1 required space ca. l x w x h mm 1100 x 300 x 1000 located in 97447 Gerolzhofen sale in current condition - free on truck - Pedpfx Aasvwgd Sszsrb

Condition: excellent (used), Year of construction: 1977, overall weight: 370 kg, Ayen automatic nut runner with a large number of tools. Prjdpfx Aez Ekqleazob

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Prodpfx Aow U Uhkjazsb Tooling, Counter Rotation

Condition: used, Used Machine Prjdpfxjzyy Dgj Aazsb Features and Technical Specifications: - With 3 drilling spindles - Drilling depth 80 mm - Reach 560 mm - Motor 0.7–0.9 kW - Motor speed 1,400/2,800 rpm - Speed of the center spindle 650/1,300 rpm - Outer spindle speed: 900/1,800 rpm - Table size: 800 x 800 mm - Height adjustment/clearance: 410 mm - Swivel range of the swiveling table (circular) 30° - Spindle taper MK II - Drill chuck (clamping range) 0–16 mm - Weight 430 kg

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Pedpezuxp Rofx Aazsrb Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, usedmake Rapidnumber of spindles 3 pieceswall machineupright projection approx. 500 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Predpevwfmrjfx Aazob

Condition: used, Richards PRT 2N Type Horizontal Boring Machine with Mitutoyo 3 Axis DRO (KL-Counter), Main Table size 1020mm x 760mm, Sub Table size 910mm x 910mm, Variable Height Centre, Speeds 160 - 500rpm, Bed length 1980mm to Centre, Z Axis Travel 1000mm Podezy Rbvopfx Aazsrb Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Prodjzd Hntjpfx Aazjb Storage location: Nattheim

Condition: ready for operation (used), Kölsch / Beichle Uni1-Uni4 / Universal milling machine - Universal rotary table - Coordinated milling paths X / Y / Z Psdpsz Eyyijfx Aazjrb - Suitable for general milling operations and partial and full circular milling - Additional three-jaw chuck Dimensions: L x W x H 1.7 x 1 x 1.9 meters / Weight 950 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2172, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 300 m/min, table length: 1,120 mm, table width: 630 mm, total length: 2,760 mm, table height: 2,800 mm, total width: 3,306 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, drilling capacity: 30 mm, Dimensions of the working surfaces: - Maximum stroke of spindle - min.270mm - Spindle extension - 710mm - Distance from spindle end to working table - least 200mm greatest 750mm - Internal spindle cone acc.to GOST 15945-70 - metric 45 - Machine weight (without electrical equipment and accerssories) - 6890kg Table and skids: - Nr.of table slots - 7 - Securing the table and sleds - mechanical - Screen counting method - optic - Screen resolution value- 0,001mm Podpfx Asunrhaoazsrb Spindle: - Boring capacity: 250mm - The accuracy of processing a given size at a feed rate no more than 150mm/min - 0,2mm - Force allowed by the feed mechanism - 600kgs - Spindle RPM limits (within two gears): 1st gear- 32-400 RPM, 2nd gear - 160-2000 RPM - Maximum vertical mechanical displacement - 330mm Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. Götzinger Drilling and Milling Centre ----- For sale on behalf of a client! Psdpfjv N N Spsx Aazsrb Machine for ‘left-hand’ and ‘right-hand’ parts. The machine was controlled via window-making software, but can also be operated via the machine’s own software. The machine is equipped as follows: - Drilling units on the left and right for end-face drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once and the unit carrier then moves to perform the various machining operations. Machine installation length approx. 6 m. For further information, see the attached PDFs.

Condition: ready for operation (used), functionality: fully functional, AYEN push-rod drilling unit electro-pneumatic push-rod drilling unit various types Psdpfx Ajqv Ey Uoazorb 2 units RPM 1C, 0.73 kW – €450 each 1 unit RPM 0.5C, 0.37 kW – €400

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Prjdey Ey E Ropfx Aazsb Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Prodpfxszp Dn Ie Aazeb Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: used, Used dowel drilling machine Ayen Type DB 1000-B23 for drilling operations in the production of dowel joints in woodworking. The machine features a working width of 720 mm, a maximum clearance of 820 mm and different drilling depths for vertical and horizontal machining. Technical data: - Working width: 720 mm - Max. clearance: 820 mm Prodpfxjzryr Uj Aazob - Drilling depth, vertical: 45 mm - Drilling depth, horizontal: 120 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2170112, spindle speed (max.): 1,650 rpm, total height: 1,800 mm, total length: 4,000 mm, total width: 1,000 mm, For sale is a Kärcher ROBO 30 pipe drilling and milling machine, manufactured in 2012. Motor power: 1.85 kW Compressed air: 6 bar The ROBO 30 is designed for the quick and dimensionally accurate machining of pipes, flat material, and profiles. The self-centering clamping device allows different workpieces to be quickly and precisely clamped and machined. The machine enables angular drilling and milling operations and is particularly suitable for the production of railings, handrails, and similar structures. Prodozyntpspfx Aazjb Inspection is possible by appointment.

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm Prodpfx Aaexzp Rlszjb

Year of construction: 1992, condition: excellent (used), 23 spindles Psdjk Up Itspfx Aazerb working width 720 mm vertical drilling depth 45 mm horizontal drilling depth 120 mm

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Pedpfxszmxf As Aazsrb Defective – PLC controller missing.

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, travel distance Z-axis: 950 mm, spindle speed (max.): 1,900 rpm, spindle speed (min.): 38 rpm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, table length: 1,000 mm, table width: 1,000 mm, table load: 2,000 kg, spindle mount: MK 5, total height: 3,500 mm, total length: 2,750 mm, table height: 850 mm, total width: 2,280 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, distance between stands: 1,575 mm, spindle diameter: 120 mm, spindle motor power: 11,000 W, spindle stroke: 300 mm, Additional techical specs: - Distance between pilars - 1575mm - Spindle speed: Nr.of gears: 18, Range 1:50: 18 to 1900 RPM, Stepup: 1,26 - Spindle feed: Drilling feed, nr. of gears: 15. Range: 0,03 to 0,8 mm/rev. Frictional feeds, nr.of gears: 3. Range: 2, 3 to 4 mm/rev. - Performance: Largest drilling diameter into solid material: 55mm for cast iron with feed: 0,6mm/rev. Largest drilling diameter approx.: 300mm Largest facing diameter: 620mm Largest cutting diameter (for steel,cast iron) approx.:120mm Psdpfx Aajunhd Rjzsrb Largest milling-cross section (with table feed): 150mm2 at a milling feed of: for cast iron- 400mm/min, for steel: 200mm/min Power of drilling motor: 6 HP Power of lifting motor: 5 HP Connected load of the machine: 11kW Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine with extensive accessories! Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine/fixture drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the tedious manual adjustment of individual coordinates over long distances using hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which must be switched on separately before starting work and to maintain high accuracy and dimensional accuracy. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.00. It is worth noting that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and facing at depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are mainly used in the watch industry, gunsmithing/defense industry, precision engineering, material testing, and the optical industry, where the highest precision is required. It is also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Pedpszuvwlefx Aazerb Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, Vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mount MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 HP Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine, as is customary with used machines, is made in full before loading, no partial or installment payments! Special price due to business closure. Shipping (direct transport without transshipment) within the EU is possible. Price net export within the EU. Example: Secure shipping by direct transport (without transshipment!) to France/Spain/Italy, etc., up to 1700 km travel distance, approx. 1100 - 1450 EUR.

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Pitch 32 mm Guide rails for drilling rows of holes Angle stops Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Predpfx Aaez Dt Hyezeb Technical data available upon request The data has been taken from a brochure, therefore no guarantee is given.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 20 rpm, For sale: Aciera F4 milling machine – ISO 30 – very complete with many accessories For sale: an Aciera F4 universal milling machine, equipped with an ISO 30 tool holder and featuring a very extensive range of accessories. The Aciera F4 is a high-quality Swiss precision milling machine, known for its robust construction, accuracy and versatility. This type of machine is very popular with toolmakers, precision workshops and enthusiasts of classic quality machines. Thanks to its universal design, the F4 is suitable for a large number of milling, drilling and precision machining operations. Technical specifications: • Brand: Aciera • Type: F4 • Design: Universal milling machine • Spindle taper: ISO 30 • X-axis travel: 400 mm • Y-axis travel: 180 mm • Z-axis travel: 400 mm • Solid and precise Swiss construction • Suitable for both horizontal and vertical milling, depending on the head and accessories used • Highly versatile Very extensive accessories The machine comes with a very large number of accessories, including various ISO 30 tool holders and other original and matching accessories. Including: • Dividing head • Various dividing plates • Rotary table • Machine vise • Various ISO 30 milling chucks • Various collet chucks and collets • Milling arbors and holders • Various milling cutters and cutting tools • Clamping tools • Drawbars • Clamping devices • Parallel blocks and clamping materials • Various original and matching machine attachments • And much more The large number of accessories makes this a particularly complete machine that can be used immediately in a wide range of applications. The extensive collection of holders, collets, dividing equipment and clamping tools alone represents a significant value. The Aciera F4 is not a light hobby milling machine, but a real precision and toolmaking machine. With a working area of 400 mm in X, 180 mm in Y and 400 mm in Z, the ISO 30 taper and the extensive accessories, this is a particularly versatile machine. A great opportunity to purchase a very complete Aciera F4 with ISO 30 taper and an exceptionally large number of accessories. Condition: used Location: Emmeloord Asking price: € 6,850 VAT: excluding VAT Inspection and demonstration are possible by appointment. If you are seriously interested or would like more information about the machine and the available accessories, please contact us. Prjdpfx Aajzxgyfezjb

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, Drilling width 240 mm, Drilling depth 150 mm, Max. travel 230 mm, Prodpfx Aasvl Eynezsb Drill head height adjustment 160 mm, Drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, Speed 3,000 rpm, Motor 2.2 kW, 400 volts, 50 Hz, Weight approx. 345 kg, Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. Pjdpfx Aaeyy Rtzezerb The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.