Used Bach Thermocut for sale (404)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Fodpfx Ahezizkyovogf Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: good (used), Year of construction: 2010, Offer 25375 Technical Data: - Working area / cutting length with approx. 5 m rails: approx. 3000 mm - Working area / cutting width: approx. 1500 mm Fodpfx Ajxnivzshvegf - Controller: BACH - Track gauge: approx. 1900 mm - 1 plasma torch with height adjustment - Plasma source: KJELLBERG Hi FOCUS 160 i - Cutting current at 100% duty cycle: 10 - 160 A - Cutting range (steel): approx. 5 - 50 mm - Cutting range (aluminium): approx. 5 - 35 mm - Cutting range (stainless steel): approx. 5 - 30 mm - Connection: 400 V / 35 kVA - Extraction table with extraction unit, make: TEKA, type: Filtercube 4 H, year 2010 - Weight: approx. 4 t - Space requirement for system: approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction unit: approx. L 1.5 x H 3.5 x D 1.5 m

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part) Fgodpsf Ncadjfx Ahvjf

Condition: used, Year of construction: 2006, CNC gantry cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m Fsdpfx Aow El Udohvogf 2 oxy-fuel torches 3826

Year of construction: 1991, condition: used, weight 240 kg max 50 mm ja serial number 2035 Fgedpfxoztfvbj Ahvjf

Condition: excellent (used), Year of construction: 2018, Profiling machine Fgedpfeztkw Dsx Ahvef

Condition: used, empty load weight: 2,460 kg, maximum load weight: 5,540 kg, overall weight: 8,000 kg, axle configuration: 2 axles, first registration: 12/2004, loading space length: 5,000 mm, suspension: other, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: compressed air brake, with lighting system, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fgedpfx Aszrhlvshvef

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Fgjdpfx Aozrbvnohvsf Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: used, Year of construction: 2009, machine/vehicle number: 0301-260016, Kaltenbach hole-sawing system for use in medium- to heavy-duty steel construction. With this Kaltenbach system, steel sections can be drilled, center-punched, and cut to length in a single operation. Rolled sections such as double-T steel, T-steel, U-steel, angle steel, hollow sections, and flat steel are processed here. The system’s drilling unit features an automatic tool changer on three drilling spindles, each capable of holding five tool sizes. The tools are positioned with high precision using ball screws and servo motors. Fgsdpfx Aozma Thehvsf The entire system is equipped with a length measuring device and a comprehensive transport system. Technical Specifications for the KDXS 1215 Drilling System: • Working area: min. 80 x 65 x 10 mm • Working area: max. 1200 x 450 mm • 3 drilling units (vertical Y-axis, horizontal Z- and W-axes), each 11.0 kW, frequency-controlled: 33.0 kW • Automatic tool changer (3x5) • Drive power, frequency-controlled: 78 kW • Working height: 640 mm • Machine dimensions: 6100 x 1300 x 3730 mm (LxWxH) • CNC control with Profiline 3 software Kaltenbach HDM 1432 high-performance circular saw as a vertical saw with swivel mounting for high cutting performance on medium and heavy steel profiles; working range for 90° cuts: 1200 x 450 mm; miter adjustment for miter cuts of -45°/90°/+35°. This saw is equipped with a segmented saw blade with a diameter of 1430 mm. High cutting performance thanks to a powerful drive NC-controlled cutting angle adjustment Feed via ball screw for ideal cutting results and minimal downtime This hole-sawing machine is in very good condition.

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILE STEEL SAWING AND DRILLING MACHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 sawing and drilling combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. This sawing and drilling system is ideally suited for the cost-effective sawing, drilling, center punching, marking (scribing), and thread cutting of profiles and flat steel bars in the steel construction and steel trading industries. The Kaltenbach KDX-S drilling system is equipped with 3 drilling units, each with 26 kW of drive power and a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage), together with the T13 transport system, is designed for profile lengths up to 18 m. The comprehensive transport system for handling structural steel also features cross conveyors at the infeed and outfeed for the transverse transport of the sections. The CNC control system, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, providing the operator with a clear view. The removal and ejection of the initial cut or the onward transport of the profile to the discharge area is performed by a gripper located after the saw. The Kaltenbach KBS 1010 DG – KDX-S 1015 sawing and drilling system combination consists of: STEEL PROFILE DRILLING SYSTEM Kaltenbach KDX-S 1015 MITER BAND SAW Kaltenbach KBS 1010 DG Fsdpfx Aeymy Imshvogf MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Fsdpfsztqt Sox Ahvjgf Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Walter Fielenbach - Centrifuge F25 -Payload: 25 kg -Drum volume: 35 liters -Drum wall: 3 mm steel -Speed: 980 rpm -Motor power: 4.5 kW -Drive power: 1.5 hp -Material: SM steel Dimensions: Fgsdpfx Aozta U Sehvof L x W x H 0.9 x 0.9 x 1.2 meters / Weight 300 kg Errors and omissions excepted.

Condition: good (used), Saw blade diameter: 1310 mm Cutting diameter: 440 mm Machine weight: approx. 7.5 tons Fjdpfx Ahoztpa Djvsgf

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, 3-axis-Bed Type Milling Machine - Universal | Brand: AUERBACH | Type: FBE 2000 Year of manufacture: 2002, complete overhauled by the manufacturer in 2015 The complete overhaul in 2015 included, amongst other things, the disassembly of all axes, cleaning, reassembly and recommissioning. The machine can be inspected under power by appointment. Condition: Very well maintained / ready for use. Operating hours (July 13, 2026): approx. 40.000 h Last maintenance carried out in 2025, at 36.250 operating hours. TECHNICAL SPECIFICATIONS: Travels: - X-axis: 2.000 mm - Y-axis: 1.000 mm - Z-axis: 900 mm Dimensions / Weight: Dimensions W/D/H: 5,5 (7,15 including chip conveyor) x 4,1 x 2,7 m Machine weight: 13 tons EQUIPMENT: - CNC control system: Heidenhain TNC 426 - Universal milling head (mechanically swivelling), Brand: SEMPUCO, KFU-2/45/021 - Spindle speed: 3.500 rpm Fgsdjzmn Ruspfx Ahvef - Tool magazine: 46 positions - Tool holder: SK 50 - Electronic handwheel - 3D infrared measuring probe, brand: m&h Hexagon - Table load: 6 tons - 5 x 22 T-slots in the milling table - Chip conveyor with coolant system - Large air-conditioning unit control cabinet - Drive motor for the Z-axis (spare part) - Documentation in German No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: good (used), Year of construction: 1986, Cold circular saw KALTENBACH KST 400, serial no. 105897, manufactured in 1986, with a roller conveyor. Fsdpfx Ahjzqcnisvjgf

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. Fgodpfsvkphgox Ahvof PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: ready for operation (used), Year of construction: 2006, A Reichenbacher CNC 5-axis twin-head machining center for the door manufacturing industry is available. Spindle power: 15kW, Speed: 24000rpm, Tool interface: HSK-F63, Tool positions: 60, Milling spindle spacing: 1040mm, Spindle housing dimension: 150mm, Travel X/Y/Z: 5100mm/2100mm/2650mm, Tool change stroke: 550mm, Max. travel speed X/Y/Z: 60m/min/90m/min/20m/min, Clamping beam speed: 40m/min. Vacuum support rails: 2, Vacuum cups: 2×30, Stop stroke: 150mm, Stop pin diameter: 30mm, Through-feed stop 1/2: 300mm/700mm, Max. veneer overhang: 5mm, Max. veneer thickness: 5.5mm. Workpiece length range: 800mm-3200mm, Workpiece width range: 600mm-1400mm, Workpiece thickness range: 38mm-72mm, Max. workpiece weight: 200kg. Chip conveyor belt width: 700mm, Infeed roller conveyor dimensions X/Y: 6000mm/1600mm, Outfeed roller conveyor dimensions X/Y: 6350mm/1600mm. Overall system dimensions X/Y/Z: approx. 18300mm/9750mm/3500mm, Machine dimensions X/Y/Z: approx. 4200mm/1600mm/3000mm, Machine weight: approx. 10500kg, Control system: Siemens Sinumerik 840D power-line. Including fully automatic infeed and unloading, 2×gantry cranes, safety equipment, various tools and a self-lowering roller table. This system was modernized in 2016. Documentation vorhanden. An on-site inspection is possible. Fgodpfx Aozqu Hwehvsf

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Fgsdpfx Ahewtdi Aovjf Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -stable design -electrically powered -Drive motor: 0.37 kW 76 rpm -Roller width: 1450 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 950 mm, adjustable -driven: via belt -Number: 2x roller conveyors available Fgjdjiv Im Ijpfx Ahvef Price: per piece -Dimensions: 1400/1650/H1000 mm -Weight: approx. 300 kg/piece

Condition: used, Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm -Inlet: Ø 220 mm Fgodpfxoq Dau Tj Ahvjf -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -stable design -movable -electrically powered -Drive motor: 0.37 kW 76 rpm -Roller width: 850 mm -Conveyor length: 1140 mm Fsdpfxob A S T Tj Ahvsgf -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 1100 mm, adjustable -driven: via belt -Dimensions: 1140/1150/H1110 mm -Weight: 230 kg

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -stable design -movable -electrically powered -Drive motor: 0.37 kW 71 rpm -Roller width: 850 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 1100 mm, adjustable -driven: via belt -Number: 2x roller conveyors available Price: per piece -Dimensions: 1140/1150/H1110 mm Fodpob A S Ubefx Ahvogf -Weight: 230 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit with: 1x pump and pressure equalization -1x Hydraulic pumps: of type -1x pump max. pressure: 120 bar -1x pump max. flow rate: 30 l/min -1x Drive: 7.5 kW 1450 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1010/760/H1325 mm -Weight: 532 kg Fgodpfxodpat Io Ahvjf

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting Fsdsb A Himopfx Ahvsgf -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Condition: good (used), Year of construction: 2009, Conveyor belt, belt conveyor, transport belt, belt conveyor -Belt width: 2x 30 mm -Width: adjustable -Conveyor belt length: 1450 mm -with frequency converter in the geared motor -Drive: 0.075-0.37 kW Fgedpfx Aeb A Hwujhvsf -Speed: 14-72 rpm -Height: adjustable -Number: 5 conveyor belts available -Price: per piece -Dimensions: 1450/1380/H960 mm -Weight: approx. 100 kg