Used Baler 80 T With Pecial Press Ram For Pressing ‘Difficult’ Materials for sale (94,235)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Kjdpfx Amsx A U Nco Ejdk Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Kdsdpfx Amjwud Tko Eek Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Kjdpfxsywdtvo Am Eedk Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: used, Year of construction: 1995, functionality: limited functionality, cutting force: 800 t, empty load weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. Kjdpfx Amjh T Dctj Eedk master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Kdsdpfxoyg Hcds Am Esk

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Kodjwpkw Eepfx Am Ejdk Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Technical details Print type Inline inkjet system Ink type Oil-based pigment ink (cyan, magenta, yellow, black, gray) Print resolution Standard/full color black: 600 dpi (main scan direction) × 600 dpi (secondary scan direction) Cyan, magenta, yellow, gray: 300 dpi (main scan direction) × 300 dpi (secondary scan direction) Fine Black: 600 dpi (main scan direction) × 600 dpi (secondary scan direction) Cyan, magenta, yellow, gray: 300 dpi (main scan direction) × 600 dpi (secondary scan direction) Number of gray levels Black: four (4) gray levels Cyan, magenta, yellow, gray: 12 shades of gray Data resolution standard/full color Black: 600 dpi × 600 dpi Cyan, magenta, yellow, gray: 300 dpi × 300 dpi Fine Black: 600 dpi × 600 dpi Cyan, magenta, yellow, gray: 300 dpi × 600 dpi Line smoothing 600 dpi × 600 dpi Warm-up time Max. 2 min. 30 sec. (at a room temperature of 23 °C) Print time to 1st page*1 Max. 5 sec. (A4 portrait feeder) Copy time to 1st page*1 Max. 7 sec. (A4 portrait feeder) Print speed *2 *3 A4 portrait feeder Simplex: 165 pages per minute Simplex: 80 sheets/minute (165 pages per minute) Letter portrait feeder simplex: 165 pages per minute simplex: 80 sheets/minute (165 pages per minute) A4 landscape feeder Simplex: 165 pages per minute Simplex: 60 sheets/minute (130 pages per minute) Letter landscape feeder Simplex: 165 pages per minute Simplex: 60 sheets/minute (130 pages per minute) B4 (JIS) Landscape feeder Simplex: 102 pages per minute Duplex: 44 sheets/minute (88 pages per minute) Legal landscape feed simplex: 104 pages per minute duplex: 44 sheets/minute (88 pages per minute) A3 landscape feeder simplex: 88 pages per minute duplex: 42 sheets/minute (84 pages per minute) Ledger landscape feeder Simplex: 86 pages per minute Duplex: 42 sheets/minute (84 pages per minute) Paper size: Standard tray Max: 340 mm × 550 mm Min.: 90 mm × 148 mm Paper cassette Max.: 297 mm × 432 mm Kodperrxn Ssfx Am Eodk Min.: 182 mm × 182 mm Print area 314 mm × 548 mm Guaranteed print area * 4 Standard: margin width 3 mm Max. margin width 1 mm Paper weight Standard tray 46 g/m2 up to 210 g/m2 Paper cassette 52 g/m2 up to 104 g/m2 Paper feed capacity Standard tray stack height up to 110 mm Paper cassette stack height up to 56 mm (x 3 cassettes) Output table capacity Stacking height up to 60 mm Network interface Ethernet 1000BASE-T/100BASE-TX/10BASE-T (2 channel) Storage capacity 4 GB Hard disk *6 Capacity 500 GB Available storage space Approx. 430 GB Operating system Linux Power supply 100 to 240 V, alternating current, 12.0 to 6.0 A, 50 to 60 Hz Power consumption Max. 1200 W

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Aseptic filler for drums Asepsystems with 2 heads 1" plug with homogenizer and sterilizer. Kdjdpfeq Rdhusx Am Eok

Condition: used, mileage: 1 km, first registration: 10/2025, fuel type: diesel, tire size: 445/95 R 25, axle configuration: 10x8, fuel: diesel, suspension: hydraulics, Year of construction: 2025, Equipment: crane, = Additional options and accessories = - 10x8 drive - Hydraulic suspension = More information = Axle configuration Tyre size: 445/95 R 25 Suspension: Hydraulic suspension Front axle: Max. axle load: 12,500 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100% 1st middle axle: Max. axle load: 12,500 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: Disc brakes 2nd middle axle: Max. axle load: 12,500 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: Disc brakes 1st rear axle: Max. axle load: 12,500 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: Disc brakes 2nd rear axle: Max. axle load: 12,500 kg; Steered; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: Disc brakes Weights Unladen weight: 60,000 kg Functional Lifting capacity: 230 kg Kodpfx Aexpf Trem Eodk Crane: Year of manufacture 2025 Condition Damage: none

Condition: ready for operation (used), * Brand: Flämrich Kedpeywndfefx Am Ejdk * Model: screening machine for fine materials * Surface: 1600 x 600 mm – 1 deck * Driving: 4 kW E-motor

Condition: ready for operation (used), * Brand: Eirich * Model: screening machine for fine materials. * Surface: 3000 x 1600 mm – 1 deck Kjdpfeywmuvex Am Eodk * Driving: 4 kW E-motor * On stock: 2 pieces.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Kdsdpfx Amoy Ehnas Eek Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Kdjdpfx Amjx D Rvne Ejk • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) — KID 80 included • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,441 h, load capacity: 1,400 kg, lifting height: 3,160 mm, free lift: 1,630 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Non-marking Kdsdpeyp T Sdsfx Am Eek Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Tested with 80% remaining capacity Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Description: Overhauled, serviced and inspected according to FEM 4.004 (Government safety regulations) // Completely repaired, serviced and checked Sideshift 3rd valve Rear working light Front working light Safety light,

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Kdodpfx Aexbgnhsm Esk Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Format: 0x0 Kdodpfxsx Rh D Sj Am Esk Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: good (used), Year of construction: 2001, Extruding pressing line for soybean, Instapro, made in 2001, consisted of 2 extruders, 2 presses, original AMA automatic filtration for oil, and cooler for the cake. Capacity is up to 1.200kg/h. Kdedpfx Asxuahbom Ejk

Condition: excellent (used), first registration: 04/2008, total length: 10,800 mm, total width: 2,550 mm, color: grey, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = Iveco Eurocargo tractor own weight: 3,955 kg, total weight: 7,490 kg with Heinemann 2-axle low-loader trailer, own weight: 3,500 kg, total weight: 14,500 kg. Euro 5 engine. Only 107,907 km. German registration. Valid inspection until 06/2025. = Further information = General information Mileage: 107,907 km Cabin: Day cab Technical information Power: 162 kW (220 hp) Fuel type: Diesel Transmission: 6-speed, manual gearbox Weights Unladen weight: 3,500 kg Payload: 11,000 kg Gross vehicle weight: 14,500 kg Environment Kjdowzkdijpfx Am Ejdk Emission class: Euro 5 Condition Technical condition: very good Visual condition: very good Further information Please contact Gerrit Haverhoek for more information.

Condition: excellent (used), mileage: 107,907 km, power: 162 kW (220.26 HP), first registration: 04/2008, fuel type: diesel, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, fog lights, spoiler, = Additional options and equipment = - Roof spoiler - Speed limiter = Notes = Iveco Eurocargo tractor, unladen weight 3,955 kg, total weight 7,490 kg with Heinemann 2-axle low loader, unladen weight 3,500 kg, total weight 14,500 kg, Euro 5 engine, only 107,907 km, German registration, valid inspection until 06/2025 Kdedpfx Aswzkd Asm Ejk = Further information = Unladen weight: 3,955 kg Payload: 3,535 kg Gross vehicle weight: 7,490 kg Technical condition: very good Visual condition: very good Please contact Gerrit Haverhoek for more information.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons Kdjdpfxsgwa Ure Am Eek 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EP8607, Press brake punch for Trumpf Kdjdpfx Ajyzpf Esm Eok 86 degree H220mm gooseneck punch 42CrMo material with full body hardened and radius tip laser hardened

Condition: excellent (used), Sound insulating cabins. For Bruderer high speed automatic presses. Kdodpfx Amsiw Icbs Esk On stock available cabins for machines: BSTA 25 BSTA 41 BSTA 50 BSTA 60 BSTA 80 Cabins sold refurbished, carefully disassembled and packed for transport. Painted in white and anthracite (or colors requested by customer). Cabin is equipped with all needed holes for easy use of a Bruderer press. Front and rear doors with inspection glass. Air ventilator for climate control on top cover. For more information don't hesitate to contact us. We have on stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, also Mabu and Schaal automatic punching machines.

Condition: good (used), Nice Formax F19 former with touchscreen controls. Well maintained machine direct from European burger factory. With Tenderform Kjdpfjqaz R Usx Am Eedk

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Kjdpfxsw U Dt Ns Am Ejdk Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, power: 368 kW (500.34 HP), fuel type: diesel, empty load weight: 19,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, PRIVATE NEGOTIATION. The price does not include VAT, vehicle registration tax (IPT), or handling fees (MSS). Kdsdpfx Aoq Rwydem Esk VEHICLE OPTIONS: - Power take-off (PTO); - ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) Offer valid for contracts and/or registrations completed by 04/30/2026, subject to approval. - We accept trade-ins of any vehicle, subject to appraisal. - Financing or leasing solutions available for any amount, tailored to the customer's needs. We are EXPERTS in remote negotiations, offering you the best solution to purchase our vehicles even if you live far from the province of Bergamo. Please verify the features of the advertised vehicle. Lodotruck S.r.l. disclaims any responsibility for any unintentional discrepancies in the listing description. If you are interested in the vehicle, please include your city and telephone number in your reply to the advert. In case of a trade-in, please specify: make, model, color, month and year of registration, mileage, main accessories, gearbox, KW/HP, and the condition of the vehicle (preferably with attached photos). With this information, we can reply to you more quickly. Contact us at