Used Baler Bale Press for sale (12,572)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Lodpfx Ajzbxwioc Aehh Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Ljdpfx Acov Akcis Aohh Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Year of construction: 2008, condition: good (used), Horizontal baling press Lhedpfx Aeg Ibt Njc Ash Build in 2008 Bale size 800x1000x1400 Loading height 1250mm

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS, PAPER PRESS, FOIL PRESS, BALING PRESS Immediately ready for use, good condition Used & good / see photos Model: HSM 500.1 VL Machine No. 6135.244.P Serial No. 220109689 Pressing force 50 tons V 400; Hz 50 kW 7.5 Amps 15.5 Pressing power 6 tons Year of manufacture 2001 More presses in our other offers Item used and good / roughly cleaned (Plug it in and you're ready to go) Dimensions: On request!! Additional photos show further possible uses. All items shown in the photos are also available from us. Price quoted net per piece upon collection from warehouse 47441 Moers Current stock: 1 piece Inspection is expressly offered. More equipment in stock see photos or inquire by phone General: We are offering articles from various acquisitions, which we describe as well as possible and provide informative photos. No further information can be provided about the item. We offer the possibility of inspection on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone appointment. If required, the item can be taken away immediately. Due to time constraints, we can only answer questions about this item if you provide us with a telephone number in your inquiry. Lhjdpolc Du Nsfx Ac Ash Unless explicitly stated, this offer is for USED GOODS. Any packaging may be damaged. Items have been visually inspected and are technically in order as far as possible. All offers are ex warehouse 47441 Moers. If you would like shipping, please contact us to discuss packaging and shipping costs. If you are interested, please do not hesitate to call us. All dimensions are approximate. Errors and omissions in the description are expressly reserved.

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Bale weight up to 500 kg Oil heating Ljdpfx Acora Nqhe Ashh Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Lodpfx Aora Aghoc Ashh Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR

Condition: good (used), Baler Hsm 155.1 vl Pressure force:, 18 tons, Unit pressure:, 2.33 kg/cm², Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Lhodev Alacjpfx Ac Aoh Power supply:, 400 V/4 kW, ,

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Ledjv Ai Tgepfx Ac Ajhh Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: used, Year of construction: 1995, functionality: limited functionality, cutting force: 800 t, empty load weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder Lodpeh T Dctsfx Ac Aehh feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Lhedpeyg Hcdsfx Ac Ajh

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Lsdpfxoy S Rqws Ac Ajhh Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced Lsdoy R Nnfopfx Ac Aehh • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Lhjdpfjzdn H Rjx Ac Ash Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 1994, Brand: HSM Model: 155 VL Lhjdpfxezc Hhxs Ac Aoh Year of construction: 1994 Pressing force: 157 kN Voltage: 400 Max. bale weight: 250 kg Bale dimensions: 110 x 70 x 95 cm Machine weight: 950 kg Machine dimensions: 144 x 100 x 234 cm Feed opening dimensions: 110 x 59 cm

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Ljdezaqymjpfx Ac Aohh Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request. Transportation is also possible.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Lhedpfx Ajvq Rtksc Ajh Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: good (used), Manufacturer: Comp Lhjdpfx Acsh Eic Aj Ajh Type: SB5 Motor: 2.2 kW Stroke length: 500 mm Chamber size: 500 x 350 x 400 mm

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Year of manufacture: 2012 Ledjx D U N Sopfx Ac Aehh

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used Lhsdpfx Aoyim Ayoc Ajh • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Cameras for Premier Tech – suitable for high-speed compression balers. Used very little, practically new. Can be used for bags measuring 465x365x1320 mm. Ledpfjzckp Hex Ac Aehh

Condition: new, Year of construction: 2026, functionality: fully functional, The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Lsdpfevahudox Ac Aehh Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy bale removal Retainers to prevent material spring back Reel holder for strapping rolls A quality product „Made in Europe“ Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional Extras Machine colour RAL Can crusher insert AUTO compaction cycles Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Year of construction: 2026, functionality: fully functional, The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy bale removal Retainers to prevent material spring back Reel holder for 2 rolls of strapping A quality product „Made in Europe“ Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Ledpeu Iwgvsfx Ac Ashh Canisters and light plastic containers Clothes Light valuable materials Optional Extras Machine colour RAL Can crusher insert AUTO compaction cycles Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF550 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 550 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3217 H x 2115 W x 1200 D mm Machine weight: 1650 kg Transport height: 2500 mm Lhodpfx Asfgbtcsc Ash Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF650 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 650 kg. The baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 650 kg (material depending) Bale size: 1100 H (var.) x 1500 W x 1100 D mm Machine size: 3217 H x 2100 W x 1524 D mm Machine weight: 1930 kg Transport height: 2500 mm Loading aperture: 1500 W x 770 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Lhsdpfx Acobhxbts Aoh Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Dual cylinders for even compaction of the material User-friendly lever control Bale kicker for easy eject the bales Retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls Motor 11 kW 32 Amp Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF75MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 700 H (var.) x 700 W x 500 D mm Machine size: 2005 H x 2050 W x 872 D mm Machine weight: 562 kg Transport height: 2005 mm Loading aperture: 700 W x 500 H mm Cycle times: 35 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Lodpfxevugzro Ac Ajhh Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Power supply 380 - 400 V (3 phase) Twin Chamber Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor