Used Battenfeld Battenfeld Tm 210/1330 for sale (5,227)

Condition: ready for operation (used), Year of construction: 2005, clamping force: 2,100 kN, overall weight: 9,200 kg, Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details. • Hydraulic system pressure: 210 bar • Rated motor current: 68 A • Control voltage: 230 V • Frequency: 50 Hz • Supply system: 3~N (3-phase + Neutral) • Rated voltage: 230 / 400 V • Rated current (1st supply): 120 A • Rated current (2nd supply): 97 A Fpodpfoy Em D Tjx Anlok • Max. fuse protection (gL): 125 A

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! Fpsdpfx Anjyi Ailelsk The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Platen daylight: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Condition: like new (used), Year of construction: 2019, operating hours: 950 h, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, clearance between the columns: 710 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, mold height (min.): 300 mm, opening stroke: 650 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 10,500 kg, Injection molding machine for processing PVC-H. Conversion for processing PS/PP/PA etc. can be offered upon request! Fpsdpfxezgt Ifs Anlok warehouse no.: 503679 manufacturer: Wittmann Battenfeld type: Smart Power XL 180-1330 controller: UNILOG B8 year of construction: 2019 operation hours: 950 h clamping force: 1800 kN distance between tie-bars h x v: 710 x 660 mm size of mould plates h x v: 950 x 955 mm min. mould height: 300 mm max. open daylight: 950 mm opening stroke: 650 mm screw diameter: 55 mm swept volume: 653 ccm injection pressure: 2041 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 1x machine with material hopper PVC-U injetion unit Schuko-socket 10A measures of machine l x w x h: 5.5m x 1.8m x 2.3m total weight: 10500KG

Condition: good (used), Year of construction: 2013, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, Injection Moulding Machine BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: BATTENFELD Model: HM 90-210 Control: UNILOG B6 Year of manufacture: 2013 Technical Data – Clamping Unit Clamping force: 900 kN Tie bar spacing h x v: 420 x 370 mm Platen size h x v: 580 x 630 mm Minimum mould installation height: 450 mm Maximum daylight: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data – Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2,042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Theoretical shot weight (PS): 103 g/s Number of heating zones: 4 Nozzle stroke: 250 mm Fsdpeyglvpsfx Anlepk Dimensions & Weight Machine dimensions LxWxH: 3.7m x 1.5m x 2m Total weight: 4,100 kg Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull 2x Air valve 1x Levelling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing/coloring unit Interface for temperature control unit Tool heating 8x

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Fedpfoyglw Tsx Anlspk Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear Fpodpfx Aney Tn Ensljk • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann

Condition: excellent (used), Wittmann Battenfeld Type: SmartPower 210 Wittmann Battenfeld injection molding machine with UNILOG B8 control For use with thermoset materials Current software version: IO4.26 The machine was serviced/inspected and brought up to the most current possible standard by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in 2026. In addition to the pressure switches already present, the machine can be equipped with two additional mold internal pressure switches (Kistler module for mold internal pressure switching, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the mold internal pressure switch upgrade are included in the scope of supply. Injection molding machine: Series: SmartPower Machine type: 210/1330 Fodpfx Aezdywnenlepk Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main dimensions of the machine Noise level (DIN EN ISO 3744-46): 65 dB(A) Ambient temperature: +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours: 1437 hours Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max. (HLP 32): min 30°C (86°F) / max. 40°C (104°F) Oil temperature min / max. (HLP 46): min 40°C (104°F) / max. 50°C (122°F) Switching temperature for oil cooling (HLP 32): 35°C (95°F) Switching temperature for oil cooling (HLP 46): 45°C (113°F) Electrical system: Drive power, hydraulic pump: 37kW Motor voltage Frequency Water system: Oil cooler: Cooling water consumption: approx. 0.5 - 1.5 m³ / h (0.65 - 1.96 cu yd) Cooling water inlet max. 35°C (95°F), NW ⅜" Cooling water battery: Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi) Cooling water outlet ∅ ¾" Number of heating zones including nozzle: 5 Closing unit: SmartPower 210 Clamping force: 2100kN Type: SmartPower 210 Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2014, BATTENFELD TM XPRESS 350/2250 INJECTION MOLDING MACHINE Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 h Clamping unit Clamping force: 3500 kN Platen dimensions: 1030 × 1140 mm Tie bar spacing: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum mold opening: 1380 mm Core centering ring diameter: 160 mm Maximum ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection weight (PS): 1078 g Injection pressure: 2070 bar Maximum injection speed: 600 mm/s Additional equipment 4 × pneumatic valve 2 × hydraulic core Kneeling system after professional refurbishment Dimensions and weight Fodeziukgspfx Anlopk Machine length: approx. 7,100 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Machine weight: approx. 17,000 kg The machine is available for inspection and testing after prior arrangement of a date.

Condition: excellent (used), Battenfeld TM Xpress 350/2250 injection molding machine Control system: B6P Year of manufacture: 2014 Operating hours: 47,000 hours We offer a Battenfeld TM Xpress 350/2250 injection molding machine in very good technical condition. The machine is regularly serviced, fully functional, and ready for immediate operation. Technical specifications Clamping unit Clamping force: 3500 kN (350 t) Platen dimensions: 1030 × 1140 mm Distance between columns: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum opening: 1380 mm Centering ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection shot weight (PS): 1078 g Maximum injection pressure: 2070 bar Maximum injection speed: 600 mm/s Fodeziulwjpfx Anlspk Equipment 4 × pneumatic valve 1 × hydraulic core Dimensions and weight Length: approx. 6.9 m Width: approx. 1.9 m Height: approx. 2.4 m Weight: approx. 13,000 kg

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 270/1330 Injection Molding Machine Basic Information Manufacturer: Battenfeld Model: HM 270/1330 Year of Manufacture: 2005 Category: Hydraulic Injection Molding Machine Clamping Unit Clamping Force: 2,700 kN (270 tons) Mold Platen Dimensions (horizontal × vertical): 1030 × 1020 mm Distance Between Columns (horizontal × vertical): 710 × 630 mm Minimum Mold Height: 350 mm Maximum Mold Opening: 1150 mm Fpjdpfxszc Efcs Anlok Injection Unit Screw Diameter: 55 mm Injection Volume: 650 cm³ Injection Shot Weight: 565 g Maximum Injection Pressure: 2040 bar Dimensions and Weight Net weight of the machine, including the control cabinet: approximately 12 tons

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Fsdpfx Ansxyqw Rjlspk Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: good (used), Year of construction: 2001, Battenfeld TM 4500/2800 injection molding machine Year of production: 2001 Control: Unilog B4 4 identical machines available Closing system: Closing force: 4500 kN Minimum mold height: 425 mm Maximum mold height: 770 mm Column spacing: 800 x 800 mm Mounting plate dimensions: 1155 x 1195 mm Mould opening stroke: 760 mm Injection unit: Screw diameter: 75 mm Shot weight (PS): 1506 g Injection volume: 1657 cm³ Specific injection pressure: 1739 bar Robot interface: Euromap 12 Machine dimensions: 8.3 x 1.9 x 2.4 m Weight: 20400 kg Oil tank capacity: 800 liters Fpedpfx Ansvn Sa Tolok

Condition: excellent (used), Year of construction: 2005, BATTENFELD HM 270/1330 INJECTION MOLDING MACHINE Fodpfeziugujx Anlspk Year of manufacture: 2005 Clamping unit Clamping force: 2700 kN Dimensions of mounting plates: 1030 × 1020 mm Distance between columns: 710 × 630 mm Minimum mold height: 350 mm Maximum mold opening: 1150 mm Diameter of centering ring: 160 mm Maximum ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Injection volume: 650 cm³ Injection weight (PS): 565 g Injection pressure: 2040 bar Maximum injection speed: 144 mm/s Additional equipment 1 × pneumatic valve 3 × hydraulic cores Dimensions and weight Machine length: approx. 6,200 mm Machine width: approx. 1,800 mm Machine height: approx. 2,300 mm Machine weight: approx. 12,500 kg The machine is available for inspection by prior appointment. PIMM Machinery

Condition: excellent (used), Year of construction: 2012, Battenfeld EcoPower SE 300/1330 / Electric machine Year of manufacture: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Injection pressure: 2470 bar Metering volume: 540 ccm Clamping unit: Clamping force: 300 t tie bar distance: 770x720 mm size of clamping platens: 1090x1170 mm ejector: electric clamping unit: toggle lever control: UNILOG B6 - touch screen Additional equipment: electric machine: high speed, energy saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valve x 8 Control unit with hot runners x6 Injection unit hardened - bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/width/height: 7.20x2.04x2.20m Propulsion: Pumps/motor: 0 kW Fjdpfx Aozc Ntkonljpk Heating power: 22 kW Total power: 0 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Fsdpfx Anjzc Nu Isljpk Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2004, condition: ready for operation (used), A large-format horizontal injection molding machine Battenfeld is available. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing: 900mm/800mm, opening stroke: 950mm, max. mold installation height: 970mm, oil volume: 900l, connected load: 55kW, weight: approx. 20400kg. Documentation available. An on-site inspection is possible. The machine has a defect. Fpsdpfx Aeyz Anmjnlok

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Fsdpfx Aex A A E Eenlopk Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Fjdpfsx A Df Tex Anlepk Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Fpodpfox A A Akox Anlok Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Operating hours: 49,462 h EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Fpsdpsx A A S Eofx Anlek Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, clamping force: 4,412 kN, screw diameter: 85 mm, injection weight: 1,870 g, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 450 tons Screw diameter: 85 mm Shot weight: 1,870 g MACHINE DETAILS Fpsdpoy Ewn Nsfx Anlek Tie bar distance: 800 mm x 800 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 135930-100, clamping force: 4,000 kN, screw diameter: 55 mm, clearance between the columns: 800 mm, column diameter: 125 mm, displacement volume: 546 cm³, injection pressure: 2,041 bar, injection weight: 497 g, mold height (min.): 350 mm, ejector force: 65,000 N, ejector stroke: 200 mm, opening stroke: 780 mm, plate length: 1,160 mm, plate width: 1,060 mm, installation height: 1,130 mm, total length: 7,650 mm, total width: 2,150 mm, total height: 2,300 mm, overall weight: 14,400 kg, heating capacity: 23.1 kW (31.41 HP), pressure: 240 bar, power: 45 kW (61.18 HP), Model: TM 400/1330 Year: 2014 Manufacturer: Wittmann Battenfeld Country of origin: Austria Weight: 14,000 kg Clamping force: 4000 kN (400 tons) Hydraulic system pressure: 250 bar Control system voltage: 24 V Power supply: 50 Hz, 3-phase Largest motor FLA Electrical cabinet: includes servo drives, safety relays, and hydraulic control boards Fodpfx Asyw T Txenljpk

Condition: new, NEBES TM 210 BANDSAW - Single-phase 230V Cast iron frame Cutting angle adjustable from 0° to 60° Entirely cast iron structure with a large quick-release vise and a workpiece clamping wheel Electric pump for blade lubrication and cooling Blade tensioning system with cup springs and an oil-filled blade tension gauge, to ensure constant tension Two cutting speeds and an induction motor 0.03 mm precision on a 100 mm cut height Fpodpfei Ezq Djx Anlok Cutting Capacity: 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight: 179 kg

Condition: excellent (used), Year of construction: 2002, Battenfeld TM 4500/4500 B4 Fjdpfxjxvihaj Anlepk Year of manufacture: 2002 Clamping force: 450 tons Screw diameter: 85 mm Injection weight: 1870 g Tie bar distance: 80x80 cm

Condition: used, Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, temperature control card, amplifier card -Manufacturer: Moog, control card from Battenfeld injection molding machine -Type: D121-014-A004 Fsdpfx Aeqku Nqonlopk -Total dimensions: 270/115/H60 mm -Weight: 1.1 kg