Used Biesse Cnc Working Center With Edging for sale (56,439)

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction Itodpfx Aougpwneb Seg No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 6,900 mm, total width: 2,800 mm, Colour: Grey Empty weight: 6.100 kg - Details: - └ Description: Needs repair to B-axis and leaks to seals - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 10333 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 45 - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Type: Vtlf 2.250 - └ Year of manufacture: 2011 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 200 - └ Oil free: Yes Ijdjyr Rnuepfx Ab Sotg - Tools included: Yes - Table length [mm]: 4800 - Table width [mm]: 1500 - Voltage [V]: 400 - Current consumption [A]: 39 - Fuse [A]: 63 - Power [kW]: 22.8 - Transport dimensions: 6900mm x 2800mm x 2800mm (l x w x h) - Transport weight [kg]: 6100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, total height: 2,400 mm, total length: 13,500 mm, total width: 2,450 mm, Colour: Grey Ijdpjwnip Dsfx Ab Sjtg Empty weight: 2.500 kg Biesse Rover A1536 G FR Year 2012 Central lubrifaction FT work table, X 3765 Y 1560, 9 zones 12 kW electro spindle, ISO 30, air cooled Biesse WORKS Biesse NEST MODULE Air conditioner 16 pos. revolver magazine Work area XYZ 3765*1585*170 2x vacu pump 250 m³ C axis 360° BH 17 L drilling group Including loading and unloading system - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 81399 - Type milling table: Flat table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 7 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Capacity [m³/h]: 250 - Working range X [mm]: 3765 - Working range Y [mm]: 1585 - Z-axis working range [mm]: 170 - Transport dimensions: 13500mm x 2450mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, total height: 2,400 mm, total length: 4,500 mm, total width: 2,200 mm, Colour: Grey Empty weight: 2.500 kg CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Iedpownhanofx Ab Sjtg Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Details: - └ Description: Pallet with white control box does not belong to this machine - Year: 2014 - Documentation available: Yes - CE certificate present: No - Serial number: 60961 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 - Transport dimensions: 4500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, total height: 2,000 mm, total length: 4,500 mm, total width: 2,350 mm, Empty weight: 1.530 kg - Details: - └ Description: Including dust extraction - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 18966 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 11 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Busch - └ Type: MM 1322 A VM8 - └ Year of manufacture: 2012 - └ Main motor power [kW]: 6 - └ Capacity [m³/h]: 360 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 300 - Table length [mm]: 3100 - Table width [mm]: 1500 Itsdjyz Ad Ijpfx Ab Ssg - Working range X [mm]: 3309 - Working range Y [mm]: 1703 - Z-axis working range [mm]: 120 - Current consumption [A]: 24 - Power [kW]: 14.2 - Transport dimensions: 4500mm x 2350mm x 2000mm (l x w x h) - Transport weight [kg]: 1530kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 3 axes CNC work center for max. glass sizes : 3000 x 1500 mm 100 mm tool diameter with fix storage Isdoyw Hitspfx Ab Sotg condition very good .

Condition: excellent (used), functionality: fully functional, CNC WORKING CENTER model BUSELLATO S-MASTER H150 second hand machine 3 axes working condition : very good CE mark : YES volt. 380/50 composition : 1. vertical router with automatic tools change 2. horizontal router 3. boring unit X / Y ( horinzontal and vertical ) 4. saw blade unit useful size (working range) mm. 3200 x 1350 Iodpfsyfudgox Ab Sjtg working travel of the axes : X=4000 mm. Y=1430 mm. Z=265 mm. Maximum panel thickness mm.120 Maximum panel clearance mm.150 Installed power 16 kW Machine weight 4500 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Ijdpjxraimefx Ab Sstg Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: AL/009416, functionality: fully functional, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 400 mm, number of axes: 5, Equipment: CE marking, 5-AXIS CNC WORKING CENTER MORBIDELLI MOD. AUTHOR X5.55 EVO – CE RULES - Working dimensions: X 5.500 mm Y 1.700 mm Z 400 mm - Chip conveyor belt for wastes - Automatic centralized lubrication system - Optimized and centralized dust extraction system - 5-axis milling unit 11 kW (15 HP), HSK-63 PRISMA - Liquid-cooled electrospindle Itsdpfx Aboywd Ads Sog - Drilling unit with No. 18 vertical spindles and No. 6 horizontal spindles - TV-MORBIDELLI worktable with 10 supports, L = 1,500 mm - Laser device for suction cup positioning - Saw blade Ø 300 mm - No. 2 additional central side stops - No. 2 additional side stops - No. 30 suction cups - Tool magazine with 12 positions - Becker vacuum pump 250 m³/h (year 2022) - NUM CNC control - No. 10 lifting devices to assist loading - Voltage: 400 V / 50 Hz - S/N AL/009416 - Year 2009

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 27,300 mm, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, CNC Vertical Edge Processing Center with Integrated Single-Sided Drilling and Milling Function LiSEC, KBF-60/33 Right – Left, Year: 2016 Iedpfxjv Hprqj Ab Sjtg Automatic washing and drying machine for flat glass included 400 V, 50 Hz In very good technical condition. Inspection is possible by appointment. Available: NOW

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 5 axis (DRIVE 5C +) Gantry-drive (axe X) machine Numerical Control Control (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 10 Table dimensions (mm) 1250 Itsdpfsnzhwhex Ab Sog Clamps for workpieces fixing - Pneumatic Kit powerClamp-clamping element - K Table Automatic Tools Changing System Tools storage plate (No. of folds-positions) 14 Max. useful working area (X - Y - Z) mm 6175 x max mm 1550 x mm 300 N° 2 Working areas - Vacuum pump (capacity m3/h) 2 x 100 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes. Total installed power (50 A) WORKING GROUPS (TOP): N° 9 Independent vertical boring spindles (High Speed 7500) N° 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 1,5 N° 1 Vertical electro-spindles HSKF63 DRIVE 5C +. Vertical electro-spindles motor power (KW 10)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Ijdelkdpmepfx Ab Sjtg WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: Itjdpfx Abjixxwmj Seg A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, Xp 600 Numerical Control with Biesse Works Software Working range in X axis 3000 mm Working field in Y axis 1000 mm Working field in Z axis 60 mm Automatic loading system with motorized belt transfer N° 2 Pliers for blocking and transporting the panel N° 1+1 vertical electrospindle 3 axes (lower + upper) N° 1+1 independent blade (lower + upper) N° 29 + 29 independent spindles for vertical drilling in "X and Y" direction (upper + lower) N° 10 + 10 independent spindles for horizontal drilling in "X and Y" direction (upper + lower) Iodsuickyspfx Ab Setg Automatic unloading system with motorized belt transfer

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation Itodpfx Aol Ikzgjb Seg electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine Isdpfst Ul Dnjx Ab Setg BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: used, Year of construction: 2008, PC based Numerical Control with XILOG PLUS software Mobile pine cone with command functions Working range on the X axis is 4400 mm Working range in Y axis 1360 mm Working range in Z axis mm. 180 Z axis travel 200 mm N° 2 work camps in X No. 8 manually adjustable panel support bars with positioning LEDs N° 3 suction cups for holding the panel for each bar N° 4 pneumatic Bakelite bars for lifting the panel (helping with loading and unloading) N° 1 Vertical electrospindle with Vector axis with automatic tool change, HSK 63 connection cones Automatic tool changer with 12 positions on the operating head Drilling head composed as follows: No. 8 vertical X-axis spindles N° 5 Y-axis vertical spindles N° 4 horizontal spindles in X axis N° 2 horizontal spindles in Y axis Itodpfx Abepvai Dj Seg Safety system with bumper system on the operating head N° 1 vacuum pump 100 m3\h Automatic lubrication

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC Itjdpeux Si Hofx Ab Seg - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; Isdpfx Abstz H Ego Sjtg * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: used, Year of construction: 2016, machine/vehicle number: ab197, functionality: fully functional, workpiece length (max.): 3,000 mm, rotational speed (max.): 24,000 rpm, Equipment: documentation/manual, SECOND HAND 5+5 AXIS CNC WORKING CENTER BACCI MOD. DOUBLE JET - 5+5 interpolated axes - N. 2 independent working tables - N. 3+3 pneumatic clamps - N. 2 automatic loaders - Max working length 3000 mm - 2 high-performance working heads with 2+2 spindles each (4+4 tools) - Rpm 0-24.000 - Osai control - Drivers YASKAWA Ijdex Rcm Uspfx Ab Setg - Pitagora software - S/N AB197 - Safety nets - CE rules - Year 2016

Condition: used, Year of construction: 2000, SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. TWIN - CE - Axis strokes: X 3400 mm Y 1800 mm Z 1250 mm Isdpfx Aewrc Tdeb Sjtg B unlimited C 400° - Head Type 4 (7.5 kw cad.) - Max rotation speed 24,000 rpm - N. 2 variable geometry tables TGV - Vacuum pomp - Yaskawa drivers - Osai control - Cabin on 4 sides + roof - Year 2000 - CE rules

Condition: ready for operation (used), Year of construction: 2010, 5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - Strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - N. 2 working tables 1400x3000 mm Itjdpjk Uicgjfx Ab Sog - N. 3+3 rails per each working table - N. 3+3 CSR supports per each table - Head type CS 44 (n. 4 motors 7.5 kW each) - Rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - N. 2 inverters - Wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - Remote support - Communication PC/CN TCP/IP - Cabin + roof - CE rules - Year 2010 COMPLETELY RECONDITIONED

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Iedpfow Rpd Sex Ab Setg Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm Iodpsxdmgvofx Ab Sstg CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Self-developed brand, workpiece length (max.): 2,000 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, machine/vehicle number: 2016, Product Features: The KaFe manual Panel Bender (Bending Center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per cycle. Full servo control ensures product accuracy within 3 seconds. Product Function: Isdpfx Absxu Uhvs Sjtg The KaFe Manual Panel Bender (Bending Center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance corporate image in the sheet metal industry.