Used Blueline Feed Vibro for sale (11,163)

Condition: used, Year of construction: 2022, operating hours: 289 h, functionality: fully functional, machine/vehicle number: B0201, total width: 2,450 mm, total length: 6,050 mm, total height: 2,700 mm, empty load weight: 9,600 kg, Our FEED VIBRO features a combination of feed hopper, leveling roller, and dosing slide, ensuring consistent material feed. Thanks to the integrated drum magnetic separator with selectable strength, magnetic particles can be sorted. If pure dosing without magnetic separation is required, the magnet system can be deactivated. This module is part of our rental fleet. Cjdpexrtt Sofx Ac Norb

Year of construction: 2021, operating hours: 1,513 h, condition: used, functionality: fully functional, overall weight: 11,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B205, Our robust FEED HOPPER is specifically designed for the precise dosing of challenging, hard-to-meter feed materials. Equipped with a plate belt, the hopper reliably handles abrasive or coarse-grained materials. With a capacity of 7 m³ and an optionally integrable leveling roller, the feed rate can be adjusted. Crsdpfx Acexta D Te Neb This module is part of our rental fleet.

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Codpfx Aoy Alm Isc Nsrb Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: ready for operation (used), * Brand: VIBRO Credsywmzpepfx Ac Neb * Model: dewatering * Type: SKB 800x2000 (unused) * Surface: 2000 x 800 mm * Driving: 2,7 kW vibration motor

Condition: used, Rüttler - Jogger VIBRO-AirYear ca. 1992 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Csdorgbz Nopfx Ac Norb Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2022, operating hours: 975 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0501, The MAGNETIC DRUM consists of a two-stage drum magnetic separation system designed to remove all magnetic particles from a material stream. Because the intensity of both magnetic drums can be selected and each drum can be activated or deactivated as needed, this module is highly flexible and can always be adapted to the specific properties of the feed material. The dual magnetic separation enables higher purity levels while maintaining constant throughput. This module is part of our rental fleet. Csdpfxjxt Dqqs Ac Nsrb

Year of construction: 2024, operating hours: 150 h, condition: used, functionality: fully functional, overall weight: 9,600 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0704, SENSOR IDENTIFY is an induction sorter that separates input materials based on their electrical conductivity. If required, it can also be equipped with a color camera system to additionally detect shape and color. This enables versatile and precise sorting of materials with different electrical conductivities, such as metals and non-metals. The ejection of detected particles is carried out using compressed air. This module is part of our rental fleet. Credpfx Aexgc Iuec Nsb

Year of construction: 2023, operating hours: 514 h, condition: used, functionality: fully functional, overall weight: 7,900 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0602, SORT FLUID is a dry sink-float sorting system with an integrated dosing bunker. This replaces conventional wet sink-float sorting and eliminates the need for liquids entirely. Through an innovative combination of airflow, a special bed material, and gravity, the metals are sorted according to their average particle density. This enables separation of light and heavy metals with a high purity of up to > 99%. This module is part of our rental fleet. Cjdpfxoxtb A Do Ac Nsrb

Year of construction: 2023, operating hours: 343 h, condition: used, functionality: fully functional, overall weight: 10,300 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0302, This module is suitable for nearly all materials (including moist or highly abrasive materials). Perfect technical screening even at high throughputs is achieved through the combination of 3D screening panels on the upper deck and tension mat technology on the lower deck. This combination enables almost blockage-free screening at accelerations of up to 50G – keeping your screening panel clean at all times. This machine is part of our rental fleet. Cedpfx Aoxgda Eoc Nerb

Year of construction: 2022, operating hours: 596 h, condition: used, functionality: fully functional, overall weight: 10,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0402, EDDY ACTIVE is an eddy current separator with an eccentric pole wheel for metal sorting. The magnetic system enables highly efficient separation of non-ferrous metals from various waste streams thanks to its exceptional strength. • Very powerful eccentric magnetic system • Automatic splitter adjustment • Integrated belt tracking control Cedpfx Ajxgdg Eoc Njrb • Rotating belt scraper • Robust and compact design • Low maintenance This module is part of our rental fleet.

Condition: used, Vibro conveyor for wood waste Crodpfx Aov D Uh Sjc Nob - Total length 15 m, - Divided into two parts 7 and 8 m. - Width 400 mm.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 4004/1135, conveyor belt thickness: 3 mm, conveyor belt width: 600 mm, power: 5 kW (6.80 HP), The payment deadline for the machine is 18.05.2026! Submission of a bid requires timely collection by 22.05.2026! TECHNICAL DETAILS Band width: 100 - 600 mm Band thickness: 0.5 - 3 mm Max. load: 11 t MACHINE DETAILS Voltage: 24 / 380 V Frequency: 50 Hz Power: 5 kW EQUIPMENT Decoiler Integrated feed unit Cedpfx Aoy Nkaajc Njrb

Condition: used, Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T Cjdpfx Aswng S Aec Njrb 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Number of cylinders [pcs]: 10 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Cjdpfjyizxrox Ac Njrb Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Forward/reverse operation, 3–1,000 rpm, brake motor with Haffner 3-roller feed, 8 speeds, good condition. Transport available at additional cost! Crjdpfeybv A Aox Ac Njb

Condition: used, STC conveyor belt In-feed belt Crodpst Sbgyefx Ac Nsb Dimensions are in the photo album

Condition: used, STC in-feed conveyor belt Cedst Sbg Hepfx Ac Njrb Measurements are in the photo album

Year of construction: 2018, condition: used, Jasa feeding conveyor belt, previously used for feeding a Multihead weigher. Cjdpou N Ndiofx Ac Nsrb

Condition: used, Mobile inclined conveyor belt, compact and mobile on wheels. Crjdpfx Acju N Na Rj Nsb

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Crjdey H Dblepfx Ac Neb Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: not inspected (used), Year of construction: 1959, functionality: unexamined, pressing force: 8 t, stroke length: 56 mm, total length: 1,600 mm, total width: 1,000 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pressing force: 8 t Adjustable stroke: 8 mm to 56 mm Ram adjustability: 30 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,500 mm Weight: 300 kg EQUIPMENT Feed hopper (diameter: 500 mm) External reference: 36 Codpjy D S H Rofx Ac Norb

Condition: not inspected (used), Year of construction: 1968, functionality: unexamined, pressing force: 8 t, stroke length: 56 mm, total length: 1,600 mm, total width: 1,000 mm, overall weight: 300 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obliges prompt collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Press force: 8 t Adjustable stroke: 8 to 56 mm Ram adjustment: 30 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,600 x 1,000 x 1,500 mm Weight: 300 kg EQUIPMENT Cedpfxoy D S A Eo Ac Norb Feeder bowl (diameter: 500 mm) External reference: 37

Condition: not inspected (used), Year of construction: 1956, machine/vehicle number: 9904, functionality: unexamined, pressing force: 8 t, stroke length: 70 mm, table width: 350 mm, table length: 440 mm, overall weight: 600 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pressing force: 8 t Adjustable stroke: 8 - 70 mm Ram adjustment: 30 mm Table dimensions: 440 x 350 mm Cjdey D Sp Sspfx Ac Njrb MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,300 x 1,100 x 1,300 mm Weight: 600 kg EQUIPMENT Conveyor by manufacturer RNA (diameter: 550 mm) External reference: 62

Condition: not inspected (used), Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0278, turning diameter over cross slide: 240 mm, turning diameter over bed slide: 400 mm, center height: 120 mm, spindle speed (max.): 2,000 rpm, bar passage: 53 mm, No reserve price – guaranteed sale to the highest bidder! Bidding commits you to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Swing diameter over bed: 400 mm Swing diameter over cross-slide: 240 mm Spindle speed: 45 - 2,000 rpm Crjdpey D Sdiofx Ac Neb Spindle bore: 53 mm Centre distance: 1,000 mm Centre height over bed: 200 mm Centre height over cross-slide: 120 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 900 x 1,600 mm Machine weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change toolpost Three-jaw chuck (diameter: 200 mm) + additional three-jaw chuck Toolholder Turning tools Indexable inserts External reference: 11

Condition: not inspected (used), functionality: unexamined, overall weight: 80 kg, total height: 1,200 mm, rotational speed (max.): 3,000 rpm, machine/vehicle number: 05133, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item on time between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Speed: 3,000 rpm MACHINE DETAILS Rated voltage: 200 V Frequency: 50 Hz Rated current: 3.77 A Power: 753 VA Vibration frequency: 50 Hz Dimensions & Weight Crsdpfx Acsy D Nhlj Neb Dimensions (L x W x H): 600 x 500 x 1,200 mm Weight: 80 kg External reference: 61