Used Boge C 15 Ldr-350 for sale (66,512)

Year of construction: 2017, condition: ready for operation (used), An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible. Bjdpsynltkofx Al Aswu

Condition: good (used), Year of construction: 2016, 2x compressor units 10 bar, Boge, screw compressor, incl. compressed air dryer, compressed air tank with sound insulation hood – used –: Price per unit ex location (net): €4,950 (net) Manufacturer: Boge Model: C 15 LDR-350 Year of manufacture: 2016 Volume flow: 1.70 m3/min Final compression pressure: 10 bar Motor speed: 3000 rpm Motor power: 11 kW Operating hours as of 16.04.2024: 25,929 / 27,938 (currently approx. 30,000 h and 31,000 h respectively) Compressed air dryer Type: DS18-2 / 575145405 Serial number e.g.: 400392250004 Bsdpfowxw E Ujx Al Ajwu Min/Max refrigerant pressure: 1.3 MPag / 2.2 MPag Min/Max air pressure: 0.1 MPag / 1.6 MPag 230V Compressed air receiver: Manufacturer: BWB 306 169 Capacity: 350 L Max. operating pressure: 11 bar Max. temp.: 100°C Min. temp.: -10°C Test pressure: 16.5 bar

Condition: good (used), Year of construction: 2015, 0,728 m³/min Bwodpfx Alsz Hfakj Aeu 0 10 bar engine output 5,5 kW turning speeds 3.000 U/min dimensions 2,0 x 0,8 x 1,35 m weight 400 kg Power-On hours = 7,340 h. -BOGE ??screw compressor -BOGE ??energy-saving refrigerated compressed air dryer DS9 -BOGE ??automatic condensate drain -BOGE ??compressed air receiver with 500 l capacity.

Condition: good (used), Year of construction: 2017, Boge C10 LDR-350 Screw Compressor + Dryer + Receiver tank Manufacturer: Boge Model: C10 LDR 350 Year: 2017 Max. pressure: 10 bar Receiver volume: 350 liter Rate of flow: 1,03m3/min Motor speed: 1.500 min Bwjdpfxsyfpk Us Al Asu Motor Power: 7,5kW Machine Dimensions LxWxH: 1.960x72x1.350 mm Machine Weight: 350 kg.

Condition: excellent (used), Year of construction: 2011, first registration: 08/2011, Equipment: ABS, Mercedes CLS 350 AMG, Sail edition Year of manufacture: 06/2011. The vehicle has a completely new rear axle with nine supports, a new turbocharger, the automatic transmission has been flushed and all filters have been replaced, as well as new brakes and a new front spoiler. It has undergone a face-lift! Approximately 20,000 euros have been invested in the vehicle; it runs perfectly and has a lot of power! You are welcome to take it for a test drive with me and see for yourself! Oh yes, it has 322,500 kilometers, but it is in excellent condition! It can easily handle another 300,000 kilometers! Fuel consumption: 5-12 liters of diesel! Bwodpfsd Tt Amsx Al Aju If you have any further questions, please do not hesitate to contact me! Thank you in advance!

Condition: used, BOGE C 9 Screw Compressor, 7.5 kW / 10 bar Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Machine Type: Screw Compressor / Industrial Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar For sale is a used BOGE C 9 screw compressor, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system, separate stroboscope hand lamp, connection cable and operating manual. The compressor is suitable for supplying compressed air to machines, workshops, production facilities and manufacturing companies, as well as for general industrial compressed air applications. Operation is via the BOGE base control system with a digital operating and display panel. Technical data: Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Equipment Type: Screw Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar Motor Power: 7.5 kW Motor Speed: 3000 min⁻¹ Operating Hours (according to display): 15,749 h Control System: BOGE base control CE Marking: present Made in Germany ELMED HELIO-STROB: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Equipment Type: Stroboscope Measuring System Mains Connection: 115 / 230 V AC Mains Frequency: 50–60 Hz Max. Power Consumption: 80 VA External Clock Input: present CE Marking: present Bedpfxezxpi Nj Al Ajwu BOGE base control system Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp External clock input Digital display Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. BOGE operating display shown in the on state. ELMED HELIO-STROB shown in the on state. Nameplates present. Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Shipping Data: Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of equipment: approx. 219 kg plus cable and operating manual Shipping by freight forwarder possible Scope of Delivery: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2012, BOGE C30 screw compressor machine after service Efficiency: 3.21m3/min (3210 L/min); 22 KW engine; max pressure: 10 bar; Bwjdewc Sc Nepfx Al Aou year; 2012 mileage: 10524 h; net price 13500 PLN gross price 16605 PLN

Condition: used, Year of construction: 2014, operating hours: 14,938 h, functionality: fully functional, power: 11 kW (14.96 HP), volume flow: 104.4 m³/h, pressure (max.): 8 bar, type of cooling: air, Screw compressor Boge C15F Inverter integrated 11 kW 8 bar 1.74 m3/min Bwsdpfxeztrt Tj Al Aou Year of manufacture: 2014 Operating hours: 14,938

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves Bodez Iplmspfx Al Aswu 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,821 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 242 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: SLIM Line, number of axes: 4, This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details. Bedpfx Aszx A Ilsl Aowu • Maximum workpiece diameter: 320 mm • Maximum machining length: 530 mm • Bar capacity: 65 mm • Y-axis: ±40 mm • C-axis: Yes • Driven tools: Yes • Hydraulic tailstock • 12-station VDI40 turret with driven tools • 15" SlimLine operator panel • Siemens SINUMERIK 840D SL CNC with ShopTurn • USB and Ethernet connectivity • SMW Autoblok BH-D 250/1220 hydraulic 3-jaw chuck • Chuck diameter: 250 mm • Chuck bore: 66 mm • Hard and soft jaw sets included • 12 VDI40 tool holders • 6 Block Tool boring bar holders with internal coolant • PROGRESSline & Planonlight functions, including cycle time display, remaining time display and parts counter Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2002, volume flow: 2.25 m³/h, operating pressure: 10 bar, BOGE SC 15 reciprocating compressor Housed in a soundproof enclosure 11 kW motor Output: 1.50 m³/min Pressure: 10 bar Compressor in fully working condition. Bodpfx Alsy Uwv Sj Aowu

Condition: excellent (used), Year of construction: 2022, operating hours: 8,244 h, functionality: fully functional, overall weight: 445 kg, total length: 980 mm, total width: 1,975 mm, total height: 1,710 mm, power: 5.5 kW (7.48 HP), fuel type: electric, operating pressure: 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 68 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Available for sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf Service will be performed professionally on June 16, 2026. Manufacturer: BOGE Model: C 7 DR Year of manufacture: 2022 Type: Screw compressor, sound-insulated Configuration: • C7 = 5.5 kW screw compressor • R = mounted on a compressed air tank • D = integrated refrigerant dryer Compressor type: Oil-injected screw compressor Rated power: 5.5 kW Bodszf Ihqepfx Al Aowu Maximum pressure: 10 bar Effective delivery rate: 0.736 m³/min at 10 bar Voltage: 400 V / 50 Hz Drive: Direct drive with elastic coupling Control: Electronic BASIC control Dimensions (L × W × H): approx. 1975 × 980 × 1710 mm Weight: 445 kg (with tank & dryer) Tank volume: 500 l (C7R standard) Type: freestanding, under-mounted

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Bwedpoz Ipvfofx Al Aju Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min Bsdpfjw U U Scjx Al Aewu motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Bjdpfx Ajy Eqtiel Aswu

Year of construction: 2005, condition: used, Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible. Bwsdpfx Aljzybvqj Aju

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Bedez Dgudspfx Al Aewu Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Year of construction: 1988, condition: used, Manufacturer: Jungheinrich TYPE: EFG115 -350 ZT Serial No. 799 74 2196 Drive type: Electric Type No. 869 3000 Load capacity: 1,600 kg Bwedoz Hcqaspfx Al Aeu Battery weight: 900 kg / 945 kg Battery: 24V Year of manufacture: 1988 UVV tested. We are selling the forklift because we are moving and do not have the possibility to transport it to the new location. We purchased it about a year ago as a temporary solution, but overall, we have only used it a few times, as it is located at our second site. The forklift is functional, but the battery needs to be checked. You are welcome to inspect and test the forklift after arranging an appointment in advance. The goods are sold as is, with no warranty of any kind.

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible. Bwsdpfx Alezb Nlws Aeu

Condition: like new (used), Year of construction: 2022, overall weight: 250 kg, BOGE DS 350 refrigerant air dryer Bedpfx Aexcb Edel Aewu

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Bjdpfjx D Skmsx Al Aswu Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: ready for operation (used), Year of construction: 2019, total height: 2,110 mm, total width: 1,413 mm, overall weight: 640 kg, product length (max.): 1,413 mm, number of axes: 6, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Extra Information • Robot is completely new and never used • Robotics and Control Unit • Max. payload: 15 kg • Working range: 0–4500 mm • Digital inputs/outputs: 16 • Serial interface: Yes • CAN bus: Yes • USB interfaces: 2 • Flash memory: 8 GB • Buffer module: 24 V • Expandable to up to 12 axes • Welding Technology Power source: Included • Welding interface: Integrated • Welding and function test: Included • Torch cleaning: CMR-8-C torch cleaning device • upright Robotic welding torch: Included • Sensors Tactile sensor: Yes • Arc sensor: Included Technical Data of Workpiece Positioner • Load capacity: 10 kN • Nominal torque: max. 1600 Nm • Tilting moment: max. 8800 Nm Bsdpjx D Hdhsfx Al Ajwu • Mass moment of inertia: 900 kgm² • Rotation range: +,- 360° • Swivel range: 370° • Welding Fume Extraction capacity: 3000 - 4320 m³/h • Motor power: 5.5 kW • Connection voltage: 3 x 400V/50 Hz • Noise level: 65 dB(A) • Weight: 640 kg • Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: excellent (used), Year of construction: 2012, volume flow: 2.25 m³/h, operating pressure: 10 bar, Boge C 20 F screw compressor Variable speed (inverter) 15 KW engine Capacity 2.25 m3/min Pressure 10 bar Bjdpfx Aleukvxus Aowu Year of production 2012 COMPRESSOR FULLY FUNCTIONAL. Compressor in excellent condition.

Condition: excellent (used), Bosch U-HD 350 Kg/h. Bj2015 Weishaupt burner gas or oil possible Bwsdpfx Asm Rhdysl Aeu

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: Bodpfx Alozk N Ups Ajwu - Motor: 15 kW - 400 V - 3,000 rpm - Extraction nozzle diameter: 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Availability: at short notice Storage location: 63934 Röllbach