Used Bruckner Stenter Frame for sale (8,732)

Year of construction: 1991, condition: good (used), Bruckner stenter frame Year of manufacture: 1991 Working width: 2400 mm Infeed: from batching Weft straightener Coating: above roller or fabric above Knife coating Dryer: Short infeed, suitable for coating Needle chain Ledpfx Alozam Awe Noac 6 fields Gas-heated At the exit: squeezing padder Cylinder cooling Output: batching winding, non-stop system USED INDUSTRIAL COOLING SYSTEM FOR COOLING ROLLS Manufacturer: CIAT Model: LGN 150V R410A Year: 2010 Refrigerant: R410A Power supply: 3 × 400 V / 50 Hz Installed power: approx. 10 kW Cooling capacity: approx. 150 kW Suitable for: Cooling rolls Textile coating lines Calenders Laminating lines Plastic and rubber processing lines

Condition: ready for operation (used), Year of construction: 1986, A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible. Ledpowhy S Nofx Al Neac

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Laedpfxeyhqb Ts Al Njc

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C Lsdpowc Nyxjfx Al Njac 1 Inner Taper Type 487 D As New Condition

Condition: good (used), Flange / Intermediate flange / Mounting for faceplates Lsdoy U Ug Ujpfx Al Nsac for direct mounting on the spindle Bruckner Art. 63.333

Condition: excellent (used), -KOM 3082- Here, a live center from the manufacturer Bruckner is being offered. This center does not conform to any standard specifications. Technical data: Minimum diameter: approx. 84 mm Maximum diameter: approx. 90 mm Shank length: approx. 248 mm Ljdsww Umtepfx Al Nsac Weight: approx. 40 kg

Condition: ready for operation (used), Mounting cone: MK 6 Ljdpfx Alsg Ewiwo Njac Core tip angle: 90 ° Load: 3000 daN max.workpiece weight: 6000 daN Weight: 17 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, rotating centering points 3 pieces -Type: Röhm 114H MK6 / 2x without type designation -Recording: MK6 -Price/Delivery: complete -Transport dimensions: 390/360/H120 mm -Total weight: 33.1 kg Lajdpfswvgwhjx Al Nsc

Condition: used, revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: Bruckner, rotating center point centering cone -Type: unfortunately without type designation -Recording: MK4 Laodpfx Alerp Ilds Nec -Centering tip: Ø mm -Dimensions: Ø 58 x 203 mm -Weight: 1.6 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation -Recording: MK4 -Dimensions: Ø 60 x 200 mm -Transport dimensions: 200/185/H65 mm -Total weight: 5.7 kg Laedev T T Rwjpfx Al Nec

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation Lajdov T T S Uopfx Al Njc -Recording: MK3 -Dimensions: see photos -Transport dimensions: 180/16/H60 mm -Total weight: 3.0 kg

Condition: good (used), live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bruckner, live centering tip, centering cone Type: unfortunately without a type designation -Recording: MK5 -Centering tip: Ø 60 mm -Dimensions: Ø 120 x 315 mm Lederlpn Aspfx Al Nsac -Weight: 9.6 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 Ljdpfxov T T Ipo Al Nsac -Centering tip: Ø mm -Dimensions: Ø 95 x 295 mm -Weight: 6 kg

Year of construction: 1992, condition: ready for operation (used), Working width: 1200-2350mm, with Coating Machine JAKOB WEIß, six 1500kWh burner, was overhauled in 2007. Ljdpfx Aogny Ugjl Nsac

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Lajdpfx Ascmat Uel Nec Mechanical compression setting more photos an questions

Condition: used, Mounting cone: MK 6 Core tip angle: 90 ° Load: 3000 daN max.workpiece weight: 6000 daN Lodpfedhwy Tex Al Njac Weight: 16,9 kg

Condition: used, Retainer metric 80 Core tip angle: 60 ° Lajdedhwzwjpfx Al Noc Total length: 380 mm Weight: 18 kg

Year of construction: 2021, condition: excellent (used), Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph Lasdpfx Alonbdtie Nsc

Condition: used, functionality: fully functional, Full Newman M3 Roller Frame Setup - Selling due to business closure 23 X 31 inch frames (60+ frames) - some are meshed, some are just the frames Newman Stretching Table (requires air - small compressor or link up to current air supply) Selection of mesh panels (approx 10) - or can be used with rolls of mesh of your choice 40n tension can be achieved £1,200 + VAT (ONO) Sold as seen, all in good working order Ledpjzb Rgpsfx Al Neac Mid-Wales - UK Buyer responsible for collection or pallet delivery (2) can be arranged at buyers expense

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Ljdozd Rhkjpfx Al Nsac Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, first registration: 03/2002, color: other, Year of construction: 2002, Axle 1: left mm right mm Axle 2: left mm right mm Axle 3: left mm right mm Laodpfx Aoyn Nwgsl Noc We have the possibility to stack trailers!

Condition: used, Year of construction: 2012, total height: 1,450 mm, total length: 1,200 mm, total width: 800 mm, Type of fuel: Electric Colour: Grey Drive: motorised Lsdpewtm H Rjfx Al Njac Empty weight: 596 kg - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: ME000659 - Drive: Electric - Type: Attachment - Transport dimensions: 1200mm x 800mm x 1450mm (l x w x h) - Transport weight [kg]: 596kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 1959, This Hess surface milling machine, type KOF/K, will be auctioned off in our industrial auction / machine auction hosted by Kusch+Co GmbH – including spray booths, milling and drilling machines, industrial sewing machines, grinding machines, and workshop and office equipment – online. Ledpfozfiicex Al Njac You can find this and many other items on our platform.

Condition: used, Year of construction: 2018, Please contact Gebrauchtgeräte Center for more information Lodpfx Alozfluzs Noac

Condition: used, Year of construction: 2006, Lifting capacity: 5.000 kg Lsdozflmdspfx Al Nsac Please contact Gebrauchtgeräte Center for more information