Used Bulmor Lq 75/15/40 for sale (39,988)

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 20,544 h, load capacity: 7,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,900 mm, fork carriage width: 1,460 mm, fork length: 1,500 mm, total length: 5,000 mm, drive type: Diesel, construction width: 2,350 mm, Side loader Iedpfx Asz If Drjm Djbc Load center: 600 ISO class: FEM 4B Mast type: Telescopic Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/65-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 355/65-15 Rear tire condition: 20 - 40% Battery year of manufacture: 2007 Additional single hydraulic circuit, integrated fork adjustment device, full cabin with heater, DPF diesel particulate filter, 2 x work lights at the front.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 362 h, functionality: fully functional, machine/vehicle number: 12430021383, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl Operate, spindle speed (max.): 20,000 rpm, Auction of a DMG DMU 75 Monoblock + Pallet Handling PH150! Only 362 spindle hours! TECHNICAL DETAILS Travel in X-axis: 750 mm Travel in Y-axis: 650 mm Travel in Z-axis: 560 mm Main drive and spindle Main drive: AC motor, digitally controlled Motor spindle: speedMASTER Warranty period of the motor spindle: 36 months Speed range: max. 20,000 rpm Spindle mount: HSK-A 63 Iedoz I Tcijpfx Am Dsbc Acceleration time: approx. 2.6 s Deceleration time: approx. 2.6 s Drive power at 40% duty cycle: 35 kW Drive power at 100% duty cycle: 25 kW Spindle torque at 40% duty cycle: 130 Nm Spindle torque at 100% duty cycle: 86 Nm Spindle bearing inner diameter (front): 80 mm Spindle bearing inner diameter (rear): 55 mm Number of T-slots: 4 × 14 H12 T-slot spacing: 63 mm Centering bore: 50 mm Thread: 8 × M12 Tilting axis A Tilting angle towards the working spindle: +120° Tilting angle away from the working spindle: −120° Torque of tilting axis: 3,400 Nm Holding torque of tilting axis: 3,400 Nm Holding torque of tilting axis with hydraulic clamping: 6,200 Nm Rapid traverse of tilting axis: 40 rpm Feed rate of tilting axis: 20 rpm Input and display resolution: 0.001° Bidirectional accuracy of tilting axis A: A ≤ 9 arc seconds Permissible moment of inertia of tilting axis: max. 59 kg·m² Rotary axis C Rotary range of C-axis: 360° Torque of rotary axis: 2,000 Nm Holding torque of rotary axis: 2,000 Nm Feed rate of rotary axis: 7,200°/min Bidirectional accuracy of rotary axis C: A ≤ 7 arc seconds Table load: max. 600 kg Permissible moment of inertia of rotary axis: max. 48 kg·m² Workpiece diameter: max. 840 mm Machinable diameter: 650 mm Workpiece height: 500 mm MACHINE DETAILS Control system: Siemens 840D sl Operate Cooling system: Liquid cooling Lubrication: Oil-air lubrication Operating hours Power-on hours (according to counter): 1,166 h Spindle hours (according to counter): 362 h Further technical data can be found in the attached offers.

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Oil capacity: 300 l Frequency: 50 Hz Ibsdpfx Amjyw Rbyo Dec Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Main fuse: 63 A Main motor power: 15 kW Wiring diagram no.: 11702 Control type: DNC 900 PS If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die Iodpfxjiqhh Dj Am Debc -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Ibsdszq Hwnjpfx Am Djc Year of manufacture 1985 Technical data X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: used, Year of construction: 1986, A vertical CNC machining center is offered. X/Y/Z-axis travels: 560mm/410mm/381mm, spindle speed: 60-6000rpm, drive power: 3.7/5.5kW, table size: 410mm × 900mm, max. table load: 300kg, tool shank: ISO 40 (MAS-BT40), rapid traverse X/Y/Z: 24/24/18m/min, control: Mazatrol CAM M-2. Equipped with original parameter lists. Weight: approx. 4200kg, overall dimensions X/Y/Z: approx. 2300mm/2000mm/2641mm. The program is missing because the machine has been disconnected from power for several years. Documentation available. Inspection possible by appointment. Iedpoz Atzdofx Am Dobc

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Ijdjvx Uvxspfx Am Djbc Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,480 h, load capacity: 3,700 kg, lifting height: 6,500 mm, free lift: 3,500 mm, fuel type: electric, mast type: duplex, Very good original condition. Ibjdpfsymyiwex Am Dec

Condition: excellent (used), Year of construction: 2007, I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ. Year 2007. Working width 204 - 1304mm Working thickness 12 - 60mm Cutting width 100mm Free end width 300mm Feeding speed 10 - 40 m/min. Configuration: 1 + 1 Stk. cutting aggregates top + bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. grooving aggregate with jump for softforming function Ibedpskbx Eaefx Am Dsc Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 9,495 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 325 mm, fuel type: diesel, construction height: 2,900 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Diesel Sideloader JUMBO J/SHP60/15/40 Year of manufacture: 2004 According to hour meter: 9,495 hours Perkins engine 6 ton lifting capacity 4 metre lift height Ibjdpfx Aeyk Tc Sem Dec 2.90 metre overall height 1.50 metre fork length - Full cab with heating and radio - Lighting system - Immediately operational! - MADE IN AUSTRIA! Sale price: €13,500 net Low-cost delivery available!

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, controller model: 640M, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,500 kg, rotational speed (min.): 25 rpm, rotational speed (max.): 6,000 rpm, overall weight: 8,900 kg, coolant supply: 15 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, We are pleased to offer this very well-maintained Mazak MYV 515/40N vertical machining centre, manufactured in 2006. The machine is fitted with the Mazatrol 640M control system. This machine impresses with its stability and suitability for heavier machining operations. Technical specifications: Table dimensions: 1300 x 550 mm Table load capacity: 1,500 kg Number of pallets: 1 X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 560 mm Spindle speed: 25 – 6,000 rpm Spindle mount: MAS BT 50 Spindle motor: 18.5/15 kW Ijdpfxez Rmb Eo Am Debc Positions in tool magazine: 30 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms Ibsdpfxezd S Thj Am Dec - Oil cooler - 2-hand foot switch

Condition: used, Year of construction: 2016, load capacity: 6,000 kg, lifting height: 4,045 mm, total length: 4,950 mm, Sideloader Bulmor DQ 60-14-40 D Ijdpfxez I Ekfs Am Debc Drive Diesel Year built 2016 Lifting height (mm) 4,045 Lifting weight (kg) 6,000

Condition: refurbished (used), Various Almatec pumps, plastic and stainless steel versions, all sizes of the AH series, cpl. refurbished and available at short notice Ibsdpfx Asfcy A Hem Dec

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, *Wemhöner Variopress Model Basic 1000 Plus/Pin – Year of manufacture 2008 *Very good condition, little used Ibsdpfsxbcudex Am Dec *Type KT-MB-28/15-240 *With automatic pin system and inline rotating table *2 tables with automatic Vario-Pin system *With Teflon coating for pre-glued foil *Foil laying system for pin table (pre-glued foil) *Heating plate size: 2800 x 1500 mm *Max. workpiece size: 2,540 x 1,250 mm *Membrane: Yes *Cutting station *Foil storage paternoster, 3.2 m high, with 14 hanging rods *PLC control: Siemens S7 *Operator panel for the PLC control: SIEMENS TP 270 (touchscreen) *Automatic membrane tensioning *Installed power supply: 38.5 kW *Max. chamber pressure: 6 bar *Max. press opening: 150 mm *6 cylinders with Ø 125 mm *Operating voltage: 400V 50/60Hz *Height of the press chamber: 40 / 60 mm *Max. press force: 2400 kN *Operating pressure of the hydraulic system: 320 bar

Condition: used, Bray BRAL FC4015 High CNC 5 X. Under power at site available now., Mainly used for 5 axes machining of models and moulds including; plastics, composites, aluminium, alloys. Heidenhain i TNC 530 HSCI control, 12 station ATC, HSK A63 Spindle, working range 3990mm x 1670mm x 981mm. max dimension of work piece 3190mmx 870mm x 573mm. machine dimensions 7050mm x 3690mm x 3880mm, weight 10800 kgs. Ibsdpjzk Ibnefx Am Dsc

Year of construction: 1989, condition: ready for operation (used), A grain screening machine (vibrating screening machine) Främbs & Freudenberg for the mining industry for separating aggregates is available. Number of screen decks: 1, drive power: 7.5kW, speed: 1060rpm, lubrication: oil, oil filling quantity: approx. 2l, screen area X/Y: 4000mm/1500mm. Without screen lining. An on-site inspection is possible. Ijdpfoy R Dtvox Am Djbc

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 9,684 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 1,760 mm, fuel type: gas, mast type: triplex, construction height: 2,690 mm, fork carriage width: 1,440 mm, fork length: 1,400 mm, empty load weight: 7,380 kg, total length: 4,600 mm, drive type: Treibgas, construction width: 2,200 mm, opening width: 1,500 mm, Side loader Load center: 700 Fork width: 150 mm Fork thickness: 50 mm ISO class: integrated Mast type: Triplex Ibedpfxoz If Dlo Am Doc Transmission: Hydrostatic Technical condition: good Front tire type: Pneumatic Front tire size: 2 x 27x10R12 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 2 x 27x10R12 Rear tire condition: 40 - 60% Battery year of manufacture: 2011 Additional single hydraulic circuit, integrated side shifter, cabin, heater, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 front work lights, 1 rear work light.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM Ijdsz Imc Nopfx Am Debc 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Type: banana-screen * Surface: 4000 x 1500 mm - 1 Deck Iodpfx Amsywl Sto Dsbc * incl.: Discharge Chute, Support and PU-steel Screens, * Incl.: Springs, Motor and MotorSupport

Condition: ready for operation (used), * Brand: Haver & Böcker * Dim. screen: 4000 x 1500 mm – 2 decks Ibsdpfx Amoywnfve Doc * Incl.: E-motor and springs.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Tetra Laval spiral freezer, type: SVR 400/13.75-100-159, 380 V, 3 Ph, 50 Hz, 17 floors, s/s mesh belt, belt width: 460 mm, infeed height: 1030 mm, outfeed height: 2700 mm, total dimensions: 5850 mm x 2650 mm x 3350 mm. Including evaporator, cooling compressors and Goedhardt roof condenser, type: KOAL-76L/3-6P, number: 97-3958-010, year of construction 1997, 3 fans, dimensions: 1200 mm x 5500 mm x 1900 mm. Isdpfx Aoy Tl S Ssm Debc

Condition: new, useable dimensions (bogie hearth): depth: 4.000 mm width: 3.500 mm height: 1.500 mm max. temperature: 1200 °C working temperature: 980 °C heating power: 810 kW divided between 6 burners à 135 kW drive systems bogie hearth: 2 x 0,75 kW number of control groups: 3 PLC: Siemens S7 Ibjdpfjd Nf Smjx Am Dsc Please note that we make the furnaces according to customer requirements (e.g., dimensions, temperature, type of heating).

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,500 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 1,710 mm, fuel type: gas, mast type: triplex, construction height: 2,510 mm, fork carriage width: 1,200 mm, total length: 3,250 mm, drive type: Treibgas, construction width: 1,450 mm, Internal combustion forklift Load center: 500 Mast type: Triplex Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 300-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 7.00-12 Rear tire condition: 40 - 60% Battery year of manufacture: 2019 Iedpfx Amez Hnuqj Dsbc Additional single hydraulic circuit, cabin, heater, blue spot light, gas tank, additional coolant radiator (rear cabin), lighting according to StVZO (German Road Traffic Licensing Regulations), 1 work light at the front.

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min Ibjdpfju Nkxhjx Am Doc *