Used Cfs Germany Gmbh Subsoiler for sale (72,293)

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish Tjdpfx Alezka Rue Ujb 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Tsdpfxezizkye Al Ujb Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2011, condition: good (used), functionality: fully functional, machine/vehicle number: K 0122, Equipment: CE marking, For sale: an industrial K. Schulten KS AluKap 350-3 machine designed for the production of roller shutters with armored profiles. The machine has been in use for 10 years. Tedpezxcn Esfx Al Ujb Technical specifications: - Manufacturer: K. Schulten GmbH & Co. KG – Germany - Model: KS AluKap 350-3 - Year of manufacture: 2011 - Machine number: K 0122 - Maximum profile width: 3500 mm - Minimum profile width: 500 mm - Power supply: 400 V / 50 Hz / 2.5 kW - Air consumption: approx. 250 l/min - Pneumatic system pressure: 8 bar - Weight: approx. 900 kg - CE marking Condition: used, fully functional. Reason for sale: replacement with a newer model The machine will be available for collection in approximately 3 weeks. You are welcome to visit and see the machine in operation. Price: 20,000 EUR net Please contact us at 728 341 330.

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Tedpfxew T U Ubs Al Ueb Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: used, Year of construction: 2007, REF: MM6439 Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Todsza Eyuspfx Al Usb Manufacturer - Wick und Schaefer GmbH. Model - MIN.FM.Servo. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Previously used for vitamin enhanced flavoured water. Overall dimensions - 3600mm long x 2130mm wide x 2300mm high.

Year of construction: 2012, condition: excellent (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Item No.: B84181 Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Todpfxozklcio Al Ujb Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2012 with ECU: 2 units 2012 without ECU: 3 units 2014 with ECU: 1 unit 2014 without ECU: 1 unit Total available: 7 units

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Tjdpfx Alozxwx Es Usb Ground fault monitoring, adjustable.

Year of construction: 2008, condition: excellent (used), STULZ ALD 1062 GE precision cooling / close control air conditioning units, designed for data centre, server room and technical cooling environments. The units are manufactured by STULZ GmbH Hamburg, Germany. They are CE marked and operate with R410A refrigerant. Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1062 GE Item No.: A72170 Years available: 2008, 2009, 2010 Todpfx Aljzklicj Ueb Refrigerant: R410A Supply voltage: 400V ±10% Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 12.4 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2008 without ECU: 4 units 2008 with ECU: 3 units 2009 with ECU: 1 unit 2010 with ECU: 1 unit 2010 without ECU: 2 units Total available: 11 units

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Tedpfxezpzbfs Al Ujb Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: excellent (used), functionality: fully functional, REF: MM5465 1 x Seitz-Werke GmbH filling machine for bottles. Fed by counter-pressure tank. Manufacturer - Seitz-Werke GmbH Model - SF 12. Todpfx Alox A A I He Uob Date of manufacture - 1961 (has been refurbished since). Speed - up to 1200 bph (depending on filling volume). Capacity - variable filling range (whatever bottle size fits into holders). Overall dimensions - 1100mm diameter x 2350mm H. Last used in March 2023.

Condition: used, Year of construction: 2018, Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  - Capacity: 10 hl each - Application: Beer fermentation - Configuration: 3 × iso fermenters Tedpfx Ajywn Svsl Usb  

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de Todpfx Alszw Ukco Ujb You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Tedpfxjzmzbms Al Usb The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. Todpszl Rfxefx Al Ujb • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m Tedpfsznz Ezox Al Uob The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Todpfozil S Iex Al Ujb Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die (year of manufacture 2024) from DIL Engineering GmbH, a specially developed solution for structuring alternative proteins in high-moisture extrusion (HME). The FiberFlow F50 is designed specifically for research and development (R&D) applications, product development, and pilot trials. With a throughput of up to 50 kg/h, it is ideal for developing and optimizing formulations and processes in the field of alternative proteins, for example, for plant-based or hybrid meat and fish alternatives. By precisely cooling the extrudate, fibrous and meat-like product structures can be created. Todpfozr Hq Rox Al Uob The system has a modular design and can be configured with one or two segments, depending on the requirements. In addition, one or two separate cooling circuits are available, which ensures precise temperature control and, consequently, consistently high product quality. The integration of inline measuring systems is possible and allows for continuous process monitoring and optimization. Particular emphasis was placed on hygienic design, ensuring that the system meets the high requirements of the food industry. Due to the well-thought-out design, cleaning is simple and fast, which is a major advantage, especially in development operations. The FiberFlow F50 can be combined with a wide range of different extruder types and manufacturers. If required, a customer-specific adapter can be manufactured for the mechanical connection to the respective extruder (offered individually depending on the existing extruder). We would be happy to check the technical compatibility with your existing extrusion system in advance.

Condition: excellent (used), Huber & Ranner HVAC System (Air Handling Unit) Offered for sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was previously used as a recirculation system for a paint spray booth and is in excellent, clean, and professionally maintained condition. The system controls the complete air climate (filtering, cooling, humidifying, and air transport) and is ideally suited for production halls, paint shops, wood or metal processing facilities, and large-scale industrial projects. Technical specifications of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System designation: SPK ULA) Order number: 19 0090 Z / P.010 Airflow rate / Air capacity: 31,000 m³/h Module components in detail: High-performance fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Tsdpozrmctjfx Al Ueb Integrated cooling coil (cooler): Cooling capacity: 50 kW Material: Cu / Al (Copper/Aluminum) Refrigerant: R134a High-efficiency filter stage: Filter class: F9 / Standard (fine dust filter for maximum air purity) Filter type: TM 9U635A10-1 (Quantity: 9 units) Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise humidity regulation; includes an integrated droplet separator to prevent moisture carry-over into the air duct. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2132072, REF: MM6195 1 x Foodlogistik GmbH high-capacity dicing machine supplied with dicing multigrid. This is a fantastic high-throughput dicer for dicing fresh, tempered and cooked meat, poultry or fish. Can also be used for cheese, vegetables and fruit. Technical specification ⚙️ ✅ Manufacturer - Foodlogistik GmbH ✅ Model - DICR CAPACITY 126. ✅ Serial number - 2132072. ✅ Date of manufacture - 2013. ✅ Throughput / capacity - up to 3,000 kg/h depending on product. ✅ Product temperature range - -3C to +60 C. ✅ Chamber dimensions - 530mm long x 126mm wide x 126mm high. ✅ Electrical requirements - 400-415 V / 50 hz / 3 phase. ✅ Power - 5.6 kW. Dicing grid - multigrid, currently set up for 10mm cubes. Todpsxfll Tofx Al Uob ✅ Condition - very good, last used in June 2025.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Todpfezw Ucxex Al Ujb Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Tedpfx Ajzw Ug Rsl Ujb Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Pressurized air supply: 6-10 bar Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator = II 3 D Ex tc IIIC T135°C Dc IP65 QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. Tedpfszvwlmsx Al Ujb The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Tjdpfxezvx Dks Al Uob Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 1,064 mm, laser power: 30 W, type of cooling: air, overall weight: 35 kg, warranty duration: 12 months, scan area length: 220 mm, scan area width: 220 mm, Integra Fiber Laser – High-Precision Marking Laser for Series Production & Automation GLT – Grossmann Lasertechnik GmbH Made in Germany • Automated • Industry 4.0 Ready The Integra fiber laser is a fully integrated laser marking system designed for industrial series production, providing high cycle rates, precision, and process reliability. By combining fiber laser technology, integrated PLC, and modular machine architecture, the Integra is ideal for production lines, custom machinery, and automated marking stations. Technical Features • Power: 20 – 200 W • Galvo scan head with F-theta optics for maximum engraving speed • Work area: 100×100 mm to 300×300 mm • Integrated PLC with TCP/IP communication and I/O interfaces • Compatible with LightBurn, EZCAD, or custom software • Optional: camera systems, pallet handling, conveyor belt integration • CE-certified, low-maintenance, suitable for continuous operation Advantages • Integration system “Made in Germany” – direct from the manufacturer • Custom machine building & automation according to customer requirements • Full integration into existing production environments • Highest marking quality on metal, stainless steel, aluminum, brass, plastic, and more • German support, online & on-site training, spare parts supply Typical Applications • Serial number and nameplate marking • Barcodes, QR codes, DataMatrix • Cable and connector identification • Tool and automotive industry • Electronics and plastics processing • Contract marking and custom machine engineering Tjdpfxjxvtu De Al Ueb Delivery & Service • Delivery time: 3 – 6 weeks • Delivery, installation, and commissioning throughout Europe • Lifetime after-sales support including remote maintenance

Condition: used, Year of construction: 2021, Elements: Product transport/transfer area, robot stations, packaging material feed, forming/transfer area, multi-lane magazine/handling area, number of suction stations: 16, with CE marking. An on-site inspection is possible. Tedozxhk Sepfx Al Usb