Used Chain Chisel for sale (2,364)

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Blodpfxevvku Eo Al Isg

Condition: used, Used machine Equipment and technical data: Lift left/right: 150 mm, Lift up/down: 150 mm Motor: 1.5 kW with chain Bledpfx Aeyklfxol Isg Availability: short-term Storage location: Röllbach

Condition: used, Chain chisel machine, chiseling machine Bledeqv A U Ispfx Al Isg

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Bodpswd Tgfsfx Al Ielg Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm Bjdpfotp S E Eex Al Ielg The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: used, Length: 7 m, external width 1030 mm, height 530 mm, 4 chain paths. Bsdpfxev Eagvj Al Islg

Condition: used, Chain conveyor - IDL000773 Blsdpfx Aeufib Rsl Ieg - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, lifting height: 11,000 mm, overall weight: 7,000 kg, lifting speed: 250 mm/s, power: 5.5 kW (7.48 HP), input voltage: 230 V, input frequency: 50 Hz, Two (2x) entire units, each with maximum 11m lift, procured directly from manufacturer, delivered in 2024 but never assembled or used. All components have been stored in dry conditions. Can be configured for less than maximum lift. All documentation available. Bljdjymx Avspfx Al Ieg Price is per unit. Open to counter-offers. Purchaser must collect.

Condition: used, Year of construction: 2007, Fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished. The complete movement, clamping and, mortising cycle is fully automatic. X, Y and, Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises up to 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. Year - 2007 CE X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. Bsdpfeymnbnox Al Islg 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points. Working table dimensions 1210mm x 215mm Air supply 6 bar / 470 l/min consumption. Fitted with separate dedicated programmable hollow chisel head for producing the small mortises for glazing bars

Condition: new, Year of construction: 2022, The Sedgwick 571 Hollow Chisel Morticer features a cast iron base, column, table, and slideways, which provide a rigid and durable mainframe assembly onto which to mount the cast iron chisel head and motor. The head itself is counterbalanced by a weight, giving fingertip control to the rise and fall and eliminating the breakages associated with spring type mechanisms. Its 1.1Kw industrial fan cooled motor provides ample power for continuous duties and is fitted with a fully guarded ½” capacity adjustable chuck. Unlike a collet type system the chuck holds the auger firmly round its circumference, true to the centre line of the chisel, securing longer tool life and better cutting capability. The table has longitudinal and lateral movement on a single handwheel, not only for ease of operation, but also for more precise positioning: lateral adjustment of the table being better controlled by a central screw. The angled timber clamp is adjustable on a tee slot, giving a maximum timber width of 200mm. Coupled with the height adjustable chisel head which can give a maximum timber height of 255mm underneath the chisel, the Sedgwick 571 has exceptional capability. For repetition work there are longitudinal stops along the front of the table, a marking out rail complete with turnover stop along the rear; and 2 position depth stop for haunching. The switchgear has no volt release, thermal overload protection, and a mushroom headed stop button. Blodpfjy Efygox Al Isg Specification : Ex College A1 Condition - Unused MAXIMUM CHISEL SIZE – HARDWOOD-SOFTWOOD 19mm25mm TIMBER CAPACITY 255x200mm STROKE OF CHISEL HEAD 120mm TABLE SIZE 500x160mm TABLE MOVEMENT – LONGITUDINAL-LATERAL 430mm80mm MOTOR RATING 1.1Kw DIMENSIONS – Length x Width x Height 735x630x1520mm NETT WEIGHT 169 Kg

Condition: good (used), mileage: 135,356 km, power: 265 kW (360.30 HP), first registration: 02/2016, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 6,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, number of seats: 2, total length: 9,040 mm, total width: 2,550 mm, total height: 3,460 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Manual - PTO (Power Take-Off) - Pump - Radio/cassette - Reversing camera - Fabric - Central lubrication Number of axles: 4, configuration: 8x4, payload: 20,625 kg, curb weight: 14,375 kg, gross weight: 35,000 kg, total fuel tank capacity: 300 liters, fifth wheel: fixed, number of differentials locks: 2, central lubrication, suspension type: air suspension, cab type: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, auxiliary heater, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, reversing camera, lighting type: halogen lamp, climate control, Bluetooth, flashing lights, engine power: 265 kW (355 hp), fuel: diesel, Euro: 6, transmission type: AS-Tronic, gearbox: ZF, gears: 12, power steering, ABS, ASR, PTO (Power Take-Off), type of PTO: 1, starter battery, body length: 597 cm, pump, central locking, seats: 2, seat arrangement: 1+1, seat material: fabric, seat adjustment: manual Transmission Transmission: ZF, 12 gears, automatic Axle configuration Tire size: 315/80R22.5 Suspension: leaf suspension Axle 1: steering; left tire tread: 9 mm; right tire tread: 10 mm; brakes: disc brakes Axle 2: steering; left tire tread: 8 mm; right tire tread: 12 mm; brakes: disc brakes Axle 3: twin tires; left inner tread: 15 mm; left outer tread: 15 mm; right inner tread: 6 mm; right outer tread: 14 mm; brakes: drum brakes Axle 4: twin tires; left inner tread: 15 mm; left outer tread: 16 mm; right inner tread: 14 mm; right outer tread: 10 mm; brakes: drum brakes Weights Unladen weight: 14,375 kg Payload: 20,625 kg gross vehicle weight: 35,000 kg Functionality Loading height: 139 cm Pump: yes Condition Technical condition: good Cosmetic condition: good Damages: none Number of keys: 1 Identification License plate: 54-BKG-9 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good value • Professional sales • Multilingual service • Understanding your needs • Assistance with import and transport • (Export) license plates issued quickly Bedpfxjymwwlo Al Iolg • Expert technical service • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stocklist: Leasing with Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Blodpfxeviwdmo Al Isg Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, operating hours: 16,911 h, Vehicle No.: 407-25 HITACHI ZX 250 LCN-3 Bledpsxw Apmofx Al Ijg Year of manufacture: 2008 * 132 kW * Hammer circuit * Quick coupler * Cabin protective grille * Undercarriage approx. 70% Inspection possible at any time during our business hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the confirmation of arrival. Company logos or advertising markings on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typographical mistakes and prior sale. Vehicle descriptions explicitly do not constitute guaranteed characteristics. We refer to our General Terms and Conditions, which must be acknowledged.

Condition: good (used), mileage: 102,497 km, power: 265 kW (360.30 HP), first registration: 02/2016, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 5,020 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, number of seats: 2, total length: 8,950 mm, total width: 2,550 mm, total height: 3,450 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Manual - PTO (Power Take-Off) - Pump Bsdpfxoy Ecmwo Al Islg - Radio/Cassette - Rear-view camera - Fabric - Central lubrication Number of axles: 4, Configuration: 8x4, Payload: 20,695 kg, Unladen weight: 14,305 kg, Gross vehicle weight: 35,000 kg, Total fuel tank capacity: 300 liters, Fifth wheel: Fixed, Number of differential locks: 2, Central lubrication, Cabin type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Rear-view camera, Lighting type: Halogen lamps, Air conditioning, Bluetooth, Flashing lights, Engine power: 265 kW (355 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, Body length: 592 cm, Pump, Central locking, Seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, TECHNICAL: 42T, PERMITTED: 35T // 8X4 Transmission Gearbox: ZF, 12-speeds, automatic Axle configuration Tire size: 315/80R22.5 Suspension: leaf suspension Axle 1: Steering; Tread depth left: 1 mm; Tread depth right: 8 mm; Brakes: disc brakes Axle 2: Steering; Tread depth left: 6 mm; Tread depth right: 7 mm; Brakes: disc brakes Axle 3: Twin mounted; Tread depth inner left: 12 mm; Tread depth outer left: 11 mm; Tread depth inner right: 11 mm; Tread depth outer right: 11 mm; Brakes: drum brakes Axle 4: Twin mounted; Tread depth inner left: 17 mm; Tread depth outer left: 17 mm; Tread depth inner right: 12 mm; Tread depth outer right: 13 mm; Brakes: drum brakes Weights Curb weight: 14,305 kg Payload: 20,695 kg GVW: 35,000 kg Functional Loading platform height: 137 cm Pump: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration number: 54-BKH-1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-turnover stock • Recognizable quality • Good pricing • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged fast • Expert technical service • The security of 'recognizable quality' • And much more.... Please visit our website for special offers and full stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: excellent (used), functionality: fully functional, power: 85 kW (115.57 HP), Year of construction: 2021, operating hours: 1,033 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Schaeff TC125 / Adjustable Boom / 1,033 hrs / Power-Tilt Rotator • Manufacturer: Schaeff Terex • Model: TC 125 • Year: 2021 • Operating hours: 1,033 hrs • Power: 85 kW / 115 hp • Engine: Deutz TD 3.6 L4 • Dozer blade • High and low speed settings • Reversing camera • Power-Tilt • Air conditioning • Radio • Central lubrication system • Swing arm • Hydraulic lines for hammer, grab, and shear • Track undercarriage 90% • Digging bucket: Lenhoff universal bucket CB10M/SW08 • Total weight: 12,100 kg • Quick coupler • German machine • Immediately ready for use • Top condition, like new • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. Bsdjywlhuopfx Al Ijlg - Sale subject to our terms and conditions.

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Blsdeyuty Sopfx Al Iog Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10 m Bodod Tih Rspfx Al Iolg -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions 1200/1000/100 mm -Weight: 176.5 kg

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 9600 mm -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions: 1140/920/100 mm Bljdpfx Ajd Tih Tjl Ieg -Weight: 166.5 kg

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10.4 m -Pitch: 200 mm -Intermediate dimension: 48 mm -Price: per piece -Number: 2 pieces Bledod Tih Nepfx Al Ijg -Dimensions: 1140/960/100 mm -Weight: 180 kg/piece

Condition: excellent (used), functionality: fully functional, power: 112 kW (152.28 HP), overall weight: 22,200 kg, Year of construction: 2006, operating hours: 8,318 h, Equipment: cabin, hydraulics, quick-change device, NEW Holland Kobelco E 215/SW 10-3/Hydraulic • Manufacturer: NEW HOLLAND Kobelco • Model: E 215 • Year of manufacture: 2006 • Engine power: 112 kW/152 HP • Engine type: CNH F4BE0684M*D600 • Lehnhoff quick coupler • Hammer/grapple/shear hydraulic piping Bsdey E Nixopfx Al Ielg • Windscreen wiper • High-low speed gear • Radio • Operating hours: 8,318 h • Total weight: 22,200 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Interim sale reserved, - Errors and/or typographical mistakes excepted. - Sale according to our Terms and Conditions.

Condition: excellent (used), functionality: fully functional, empty load weight: 8,500 kg, Year of construction: 2016, operating hours: 4,175 h, Equipment: cabin, hammer hydraulics, hydraulics, Hitachi ZX85 USB-5A, year 2016, with only 4,175 operating hours, in very good condition, ready for immediate use. Equipped with Lehnhoff MS08 quick coupler including hydraulic grading bucket, approx. 8,500 kg operating weight, rubber tracks, hammer/grabber pipework. The Hitachi can be inspected and tested at any time, also by appointment on weekends. We can provide customs and export documents. Transport and delivery available. Blsdjy Ir Atepfx Al Iog

Condition: used, Year of construction: 2014, operating hours: 9,199 h, CAT 314ELCR from year 2014 with only 9,199 operating hours: ----* Manufacturer: CAT * Model: 314ELCR * Year of manufacture: 2014 * Displayed operating hours: approx. 9,199 * Incl. 1 x digging bucket approx. 65 cm * Incl. hydraulic quick coupler Verachtert * Dozer blade Bodpfx Aley H Ubcj Iolg * Mono boom * Hammer piping (auxiliary hydraulics) * Air conditioning - A/C * Transport width: approx. 2.50 meters * Further photos and video available on request * Price: 39,900 Euro, net + 19% VAT ----For further questions please call: For more questions please call: Erik Kortum: WhatsApp All information without guarantee or warranty. Errors and prior sale excepted.

Condition: excellent (used), mileage: 331,009 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, axle configuration: 10x4, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, Year of construction: 2010, = Additional options and accessories = - PTO = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Transmission: ALLISON, automatic Axle configuration Bljdpfjuxy U Rsx Al Iog Front axle 1: Max axle load: 10,000 kg; Steered Front axle 2: Max axle load: 10,000 kg; Steered Front axle 3: Lift axle; Max axle load: 10,000 kg; Steered Rear axle 1: Twin tires; Max axle load: 9,500 kg Rear axle 2: Twin tires; Max axle load: 9,500 kg Weights Unladen weight: 17,870 kg Payload: 35,130 kg Gross vehicle weight: 53,000 kg Condition Technical condition: very good Optical condition: very good Identification Registration number: BX-NZ-59 TERBERG FM2850 10X4 WITH 40 TON CHAIN SYSTEM EURO 5 L PACKAGE 400 HP DRIVE: 10X4 3x STEERED AXLES 1x LIFT AXLE WHEELBASE: 560 cm DAY CAB WITH AIR CONDITIONING, CAMERA ALLISON AUTOMATIC TRANSMISSION LED TRANS-COM CHAIN SYSTEM 40 TON HYDRAULIC CONTAINER LOCKING CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINERY FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: good (used), Year of construction: 2011, Electric chain hoist, crane, overhead crane, assembly crane -Manufacturer: Yale, electric chain hoist Bjdpfx Aex E Sq Esl Ielg -Type CPE 75-1.6 Load capacity 7500 kg -Main stroke: 1.6 m/min -Chain length: 9 m -Transport dimensions: 1200/800/H520 mm -Weight: 235 kg

Condition: used, Year of construction: 1995, CATERPILLAR 5130 complete cab for CAT 5130, incl. electronics / control unit, as shown functional, very well maintained condition Location : Germany Inspection and worldwide shipping possible More parts for CAT 5130 available Blsdpfjwlinnjx Al Iog For further information :